R/M of crusher no 4 and 5 of AADOCM Dhori Area

Amount

Damaged assembly bracket repairing with straightening broken bolts removing , tapping , assembly bolt cutting and welding etc.

New making conveyor chain flight assembly bracket with assembly bolts & nuts as per sample.

Flight assembly both side head new making as per sample and size from from forged material , groove making as per conveyor chain link outter dia etc.

New flight making from EN-9 Iron plate by cutting as per size both side head fixing and welding with special type jointing electrodes supporting cutting , fixing in the box welding etc.(03 Nos.) a) Gas cutting work in above job.

b) Welding work in above job.

Bend flight of conveyor chain assembly straightening with hydraulic press machine and alignment checking etc .

Damaged flight head removed from flights by cutting gas gauging , hammering , pushing & pulling etc. New head fitted in flights and welding with special type jointing electrode with proper alignment etc. a) Gas cutting work in above job. (4” x 4 side of flight x 2 side x 2 times= 64” b) Welding work in above job.by 7018=32"

Repairing of operator cabin damaged seat by cutting, stitching & fitting foam & rexine and bottom seat plate repairing with dismantaling & reffiting in cabin etc .

Conveyor chain bend & damaged flight straightening with the help of hydraulic press machine with alignment checking.

Repairing of both side flight pin oval size hole with metal filling and hole making as per flight Pin outer dia with machining work etc. a) Metal filling in oval size hole with special type electrodes. ( 1” dia x 314 x 6 times x 5 no. Flights x 4h hole = 376.8”)

b) Hole machining in proper round shape on lathe machine.

Jointing of broken flight with “V”shape making in all side for filling of materials setting with proper alignment and full “V” gap filling with special type jointing electrodes etc. a) Gas gauging for “V” making work in above job . 24” b) Welding work in above :48” c) Support plate cutting of size (2” width x 6” long x 2 no, 6” x 4 “ + 6” x 2” width x 2 no.:52” d) Welding work in above job :52”

Fabricating of crushroll motor & gear box coupling by making of wooden pattern as per sample and forging rough casting material for coupling , machining of face side and back side with finishing inner dia hole and key slot making for motor & gear box shaft as per size , 8 no hole making as per shear bolt size etc.

Total impact of GST for the purpose of CTC

EASTERN ENGINEERING WORKS

MAA BHAGWATI ENTERPRISES