SPL REPAIRS TO BLDG NO P 683 AT SINHAGAD ENCLAVE AT BRICHGUNJ MILITAR STATION SRI VIJAYA PURAM

Amount

Taking down chowkats or frames with shutters area exc 1.5 Sqm but n.exc. 4.0 Sqm each(without taking off shutters from the frame) complete all as specified and as directed by Engineer -in-Charge.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other Frames/chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minium frame density of 750 kg/Cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minium compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of bearing termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in- Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.) Note:- For WPC soild door/Windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.)

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/window/ceosetory windows and other Frames/chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (suspension grade), calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maxium toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minium frame density of 750 kg/Cum, screw withdrawal strength of 2200 N (face) and 1100 N (Edge), minium compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of bearing termite/ borer proof, water/moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in- Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately.) Note:- For WPC soild door/Windows frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.)

S&F Factory made single extruded WPC (Wood Polymer Composite) Solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), Calcium carbonate and natural fibres (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) and 900 N (Edge), minimum compressive strength 50 N/mm2, modulud of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer- in- Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (Stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face with Particle board Core, in frame at site as per specification & drawing.

Supply and fix factory made Wire gauzed PVC solid wood grain printed door shutter 30mm thick (style) i.e panel will be of wire gauze in lieu of single prelam PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S Solid tube and this tube shall be welded to M.S tubes. The wire gauze shall be stretched to tighten firmly consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC `C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles with suitable PVC sheet beading, and joined together with solvent cement, in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer -in-Charge.

Supply and fix in repair Corner Glass shelf 300mm all as specified and as directed by Engineer-in-Charge.

S&F Aluminium snake guard comprising nylon bristle duly secured with aluminium flat section of minimum width 30 mm and length 900 mm fixed to bottom rail of door shutter using aluminium screws complete all as specified.

Materials and labour for preparation of new steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engineer -in-Charge.

Materials and labour for preparation of old steel surface of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Supply and fix Butt hinges, 100mm length medium weight cold rolled mild steel and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fix Butt hinges, 75mm length medium weight cold rolled mild steel and fixed, complete all as specified and directed by Engineer-in-Charge.

Supply and fix 300mm aluminium alloy, anodised, sliding door bolt with hasp & staple (Bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 200mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 100mm long aluminium, anodised barrel tower bolt of extruded section, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 150mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 100mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix 75mm size handle extruded aluminium alloy anodised, fabricated type, complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repair Stainless steel wire cloth 0.63mm nominal dia of wire and average width of aperture 1.40mm fixed to steel door/ Windows with flat iron and screw complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position with nails all as specified and directed.

Supply and fix powder coated Aluminium (minimum thickness of powder coating is 50 microns) Door / window / Ventilator/railing/ partition frames and shutters (02 Nos glazed & gauzed), side hung type, without sash bars, standard aluminium grills, necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, handles, locking arrangement, magnet catch etc, alongwith builders hardware like aluminium aldrop, tower bolts, handles of required size and type complete with standard aluminium sections, all as specified and as directed by Engineer-in-charge.(Aluminium section shall be of make Jindal/Hindalco/ Indalco). (Note:- Weight of various Aluminium sections shall only be considered for measurement for payment. Weights of builders hardware like aluminium aldrop, tower bolts, handles of required size and type shall not be considered. Cost of rubber packing given in the item shall be deemed to be included in the rate quoted. Glass panels, aluminium wire cloth as applicable will be measured and paid separately as supplied only).

Supply only 4mm thick ACP board (Aluminium composite panel) fixed to aluminium frames complete all as specified and as directed by Engineer in charge

Supply only 4mm thick sheet glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply only 4mm thick figured glass ordinary quality and glazing with rubber packing around the glass, in squares n. exc 0.5 Sqm in each pane complete all as specified and as directed by Engineer-in-charge.

Supply only aluminium alloy wire mesh 0.45mm nominal dia of wire and average width of apeture 1.4mm fixed with aluminium wire staples etc.complete all as specified and as directed by Engineer-in-charge.

Supply and fix in repair powder coated aluminium grill of design DG-104 pattern, made out of 10mm dia rod fixed with and including standard aluminium frame of 'F' section of size 23.4x15.3x1.4mm thick all as per manufacturer's instructions comlete all as specified and as directed by Engineer-in-charge.

Taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc all as specified and as directed by Engineer-in-Charge.

Materials and labour for rendering 5mm thick in CM 1:4 mixed with water proofing compound over and including 10mm thick plastering in CM 1:6 on external surfaces of block masontry and finishing the surfaces even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge. Note: supply only WPC shall be measured and paid seperately

Materials and labour rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finishing the surface even and smooth without using extra cement, complete all as specificed and as per directed by Engineer-in-Charge.

Materials and labour for rendering 5 mm thick in cement mortar 1:3 finished even and smooth without using extra cement on ceiling surfaces including application of cement slurry 3 kg/sqm complete all as specificed and as per directed by Engineer-in-Charge.

Supply only water proofing compound (Powder) conforming to IS-2645 1975.

M & L for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of walls including nesessary preparation of surfaces complete all as specificed and as per directed by Engineer-in-Charge.

M & L for painting with two coats of oil bound distemper over a coat of primer on newly plastered or untreated surfaces of ceiling including nesessary preparation of surfaces complete all as specificed and as per directed by Engineer-in-Charge.

M& L for two coat of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on newly plastered wall surfaces including preperation of surfaces etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for complete removal of existing treatment on walls using steel wire brush, sanding machine, rubbing with emery papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for complete removal of existing treatment on ceiling using steel wire brush, sanding machine, rubbing with emery papers etc and washing, rubbing down and stopping of distempered and painted surfaces, preparing surfaces ready to receive new finish complete all as directed.

Material and labour for applying one coat of alkali resistant priming paint on walls complete all as specified and as directed.

Material and labour for appyling one coat of alkali resistant priming paint on ceiling complete all as specified and as directed.

M&L for applying wall care putty 1 to 1.5 mm thick on walls surfaces.

M&L for applying wall care putty 1 to 1.5 mm thick on celing surfaces.

Material and labour for appying two coats of Oil bound distemper of approved tint on wall surfaces complete all as specifie and as directed.

Material and labour for appyling two coats of Oil bound distemper of approved tint on ceiling surfaces complete all as specifie and as directed.

M & L for two coats of weather proof exterior acrylic emulsion paint with anti fungal property over a coat of primer on old painted wall surfaces including preparation of surfaces by complete removal of existing treatment of any description complete all as specified and as directed.

M&L for preparation of old steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs Brass Chromium plated tubular towel rail, 20mm dia, D type, 60cm long, between flanges including suitable bracket complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs PTMT towel ring complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs 20mm dia Brass ball valve high pressure with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed, minimum weight 142 gms,complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 15mm dia nipple of PTMT suitable for HDPE water tank, minimum weight 38 gms,complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs 20mm dia nipple of PTMT suitable for HDPE water tank, minimum weight 45 gms,complete all as specified and directed by Engineer-in-Charge

Taking up or down, 15mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 20mm dia bore, GI tubing, medium grade, including removal from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 25mm dia bore, GI tubing, medium grade, including removing from site, complete all as specified and as directed by Engineer-in-Charge.

Taking up or down, 40mm dia bore, GI tubing, medium grade, including removing from site, complete all as specified and as directed by Engineer-in-Charge.

Materials and labour for 25 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Materials and labour for 20 mm bore unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc any type of pipe all as specified and as directed.

Supply and fix in repairs,10 litre capacity,low level PVC flushing cistern, syphonic action type white colour,with inlet ball valve float and handle,PVC flush pipe,brackets etc complete all as specified and as directed by Engineer-in -charge

Supply and fix in repair PVC waste pipe 32/40mm dia for sink, wash hand basins etc complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs PTMT gratings 100mm dia, complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair shower rose 125mm size, with 225mm arm and flange with swivel joint, fixing to steel pipe or union, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs vitreous China wash hand basin of size 550 x 400mm white flat back including including brackets, cutting for and pinning in ends of brackets or errecting stand, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair vitreous china water closet, pedestal type, white including flush pipe, seat cover etc, including connection to drain (or out going pipe) and to flushing pipe anti syphonage pipes etc complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs chromium plated hand shower (health faucet) 1 meter, with PVC tube with wall hook , complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 15mm dia iron pipe or for union and fixed complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs 15mm bore stop valves fancy type chromium plated with long shank and cup, concealed type , complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screw both ends for 20mm dia iron pipe or for union and fixed.

Supply and fix in repairs 15mm size PVC Connection with PTMT Nuts of length 450mm, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 32mm brass chromium plated bottle trap for wash basin with inlet and outlet screwed for pipe or connection including necessary packing union and cap complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs gun metal globe or gate valve, 20mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repairs gun metal globe or gate valve, 25mm dia, screwed down high pressure with iron wheel head, screwed both ends for iron pipes or for union complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair 15mm dia, chromium plated brass wall mixer with swinging casted spout and all accessories for mixing hot & cold water, screwed down for 15mm bore GI pipe complete all as specified and directed.

Supply and fix 15mm dia basin single hole mixer 'Swivel' all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs Bib tap, cast copper alloy chromium plated,15 mm dia with fancy type screwed down for iron pipes or brass ferule etc, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repair 15mm dia CP brass angle valve with CP nuts and washers, CP brass wall flange with any other items complete including cutting and making good the walls wherever required complete all as specified and as directed by Engineer-in-Charge.

Supply and fix cast iron nahani traps with CP grating incl jointing to waste pipe in run lead joint for 75mm dia out let, complete all as specified and as directed by Engr-in-Charge

Supply and fix in repairs sink with drainage board, made up of stainless steel, 1mm thick for kitchen or laboratory with plug washers and waste fittings, including bedding in cement mortar 1:3 into dwarf wall or cantilever brackets and connecting union to pipe, over all size 37" x 18", bowl size 16" x 14" x 8" etc, complete all as specified and as directed by Engineer-in-Charge.

Dismantling Water Tank of Capacity n exc 250 ltrs and removing to store all as directed

Dismantling Water Tank of Capacity exc 250 & N exc 500 ltrs and removing to store all as directed

Supply and fix rotational moulded polythelene water storage tanks ISI marked (cylindrical vertical with closed top) of 1000 Ltrs capacity with tank cover (top), hoisted and fixed in position complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repairs PVC (SWR) pipes 110 mm bore in any length with rubber ring joints fixed to walls complete all as specified and directed

Supply and fix in repair 110mm PVC (SWR) bends any radius with access door all as specified and directed

Supply and fix in repair 110mm PVC (SWR) junction double (double T), equal or unequal complete all as specified and as directed.

Dismantling of floor, hearth or wall tilling incl cement mortar bedding (but not backing) and removing the rubbish off the premises complete all as specified and as directed by Engineer -in-Charge.

Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.06 sqm n.exc 0.11 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.

Materials and labour for coloured non skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 sqm n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry in floors and pointed with coloured cement to match the colour of tiles incl screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer -in-Charge.

Materials and labour for coloured glazed ceramic tiles 450 X 300 X 7mm thick as in dado/skirting set and jointed in neat cement slurry and pointed with coloured cement to match the colour of tiles over and including rendering 10mm thick in CM 1:3 on wall surfaces complete all as specified and as directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed complete all as specified and as directed by Engr-In-Charge.

Materials and labour 18-20mm thick granite stone (of any type and coloured in single peice ) work (table rubbed and polished) in steps, jambs, pillars, window cills, flooring, cooking platform machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite including griding and polishing types over & including screed bed 20mm thick in CM 1:4 complete all as specified and directed by Engineer-in-Charge.

M& L for Plastic dividing strips of 38mm width , 1.5mm thick inserted in position, conform to design

Demolition of cement concrete (un reinforced) in ground floors and pavings not exc. 15cm thickness etc below or above ground level incl floor hearth tiles if any and removing the rubbish off the premises complete all as specified and as directed by Engr-In -Charge.

Materials and labour PCC 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection or hard standing, of 75 mm thick finished fair and even, using extra cement.complete

Materials and labour for PCC 1:4:8, type D2, using 40 mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed.

Materials and labour for glazed, polished Chequered coloured cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry, including screed bedding layer in cement mortar 1:6, 20mm thick in flooring complete all as specified and as directed by Engr-In-Charge

M&L for 300 x 300 mm exterior grade parking tiles of thickness 8 to 10 mm set, jointed and pointed in neat cement slurry, including screed bedding layer in CM (1:6), 20mm thick, in flooring, complete all as specified.

Materials and labour for Plain Cement Concrete (1:2:4) type B-1 using 20 mm graded stone aggregate in roof kerbs, mud stops chamfered on edges complete all as specified and as directed by Engineer -in-Charge.

Supply and fix in repair Pre-painted galvalume aluminium zinc coating GI based (corrugated/semi corrugated) sheet 0.50mm thick as per approved profile, coloured, having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified

Supply and fix in repair Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

Supply and fix in repair aluminium plain steel sheet 0.71mm as in in ridges, hips, valley gutter, drip and straight flashing, roof covering/cladding to wall, fixed with self tapping screws and overlaping should be sealed with M Seal, all as specified and as directed by Engr-in-Charge

Dismantling of Structural steel work including doors, gates but excluding framed truss etc compete all as specified and as directed by Engineer -in-Charge.

Supply and fix Mild Steel work in tubular trusses and tubular posts/ purlins including special shaped washers etc., complete using ERW or induction butt welded tubes conforming to IS :1161-1979 grade st-240 including notching, drilling, fitting, riveting and/or welding or connecting with bed plate, bolt and nuts complete all as specified and as directed by Engineer -in-Charge.

Supply and fix rolled mild steel structural steel work of angle, channel etc. confirming to Fe-410-W (grade E 250) quality 'A', fixed as in purlins, brackets, rain water gutter etc,complete all as specified and as directed by Engineer -in-Charge.

Supply and fix mild steel flat iron as in supports for wind ties, wall ties, clamps and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and as directed by Engineer -in-Charge.

M&L in repairs for false ceiling with aluminium grid work (size of grid 605x605mm) with 35x25x1.5mm main tee and 25x25x1.4mm, cross tee and wall angle and suspended with 3.15mm dia, GI wire, hooked to roof with needful adjustment bolts at an interval of 1.20m, centre to centre staggered and board with Eco board, decorative type, size 600x600x4mm thick, complete all as specified and as directed by Engineer-in-Charge.

Dismantling and refixing for plain or corrugated roof sheeting of any description, any gauge, thickness,including Removing L-type or J-type bolts in Roof Covering.

M & L for water proofing treatment with the following specifications including taking down existing roof treatment of any description and cleaning with water and scrubbing and disposing off the rubbish outside the premises, complete all as specified and as per manufacturers instructions:- (i) Apply a coat of hot blown bitumen 85/25 @ 1.20 kg/sqm over a coat of bituminous primer @ 0.3 ltr per sqm. (ii) Laying APP membrane (STP Aquashield or equivalent) weighing not less than 3.0 Kg/sqm, reinforced with polyster non woven fabric (weighing not less than 150 gms/sqm) with 100mm over laps both longitudinally and transversally and overlaps shall be sealed by torch, membrane shall be taken to the parapet through fillet and shall be tucked in inside after a height of 300 mm.

M&L for slope correction in sunken floor surfaces using cement concrete 1:2:4 type B0 using 12.5mm aggregate with minimum 25mm thickness at one end and a slope of 1:20 mixing with integral water proofing chemical PIDI PROOF-LW or equivalent mixed in proportion 200ml/ 50 kg cement of Dr Fixit of Pidilite industries Ltd or STP No 1 (Liquid) of STP Ltd or equivalent as approved by GE as per manufacturer instructions complete all as specified and as directed (Note:- quoted rate is inclusive of supply of water proofing chemical)

Supply and fix in repairs 20mm dia aluminium anodised curtain rod fixed to pelmet box/wall etc complete all as specified and directed by Engineer-in-Charge.

Supply and fix in repairs 20mm dia aluminium anodised Brackets fixed to pelmet box/wall etc complete all as specified and directed by Engineer-in-Charge.

Taking down carefully copper point wiring (light, fan, socket or power) DBs complete offering credit, making good disturbed surfaces of walls, floors, etc, all as specified and as directed.

M&L Point wiring complete with 1.5 sqmm single core FRLS PVC insulated and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including concealed PVC conduit and all accessories fixed to walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable green in colour as earth continuity conductor and connected to common earth dolly, including ISI marked modular GI flush box of suitable size with inner and outer white plastic plate (Same make of approved switch and socket) concealed in walls, with modular cover plate for housing the switches, socket outlets,fan regulators etc., all as specified and as directed for the following:- Note:-Modular cover plate will be measure seperately

(a) One light point controlled by one switch

(b) One exhaust fan point controlled by one switch

(c)One light point controlled by two 2 way switch

(d) One fan point controlled by one switch and one regulator

(e ) One 3 pin switch socket outlet point 5 amps on same board with other switches

(f) One 3 pin switch socket outlet point 5 amps on independent board

All as per item No 111 here-in-before but for 3 pin 15 Amps switch socket combination on independent board with 4 sq mm copper cable and provision of 4 sq mm FRLS PVC insulated stranded copper conductor cable for earth continuity conductor connected to common earth dolly connecting upto fittings complete all as specified and as directed.

Supply and fixing in repair Modular switch 1 way 6 A, 1 module all as specified and directed.

Supply and fixing in repair Modular switch 1 way 16 A, 1 module all as specified and directed.

Supply and fixing in repair Modular switch 2 way 6 A, 1 module all as specified and directed.

Supply and fixing in repair Modular Bell push 5A, 1 module all as specified and directed.

Supply and fixing in repair modular socket outlet, 2/3 pin combined , 6/16 Amps, combined 2 module, 230 volts all as specified and directed.

Supply and fixing in repair modular socket outlet, 2/3 pin combined , 6 Amps, combined 2 module, 230 volts all as specified and directed.

S & F in repair modular white cover plate with frame, 3 module all as specified and directed.

S & F in repair modular white cover plate with frame, 4 module all as specified and directed.

Supply and fixing in repair modular fan step regulator, 230 V, AC, 120W - 2 module

Supply and fix in repair ceiling rose surface bakelite 65x50mm 3 terminal complete all as specified and as directed.

Supply and fix in repair bell Ding Dong 240 Volts 50 Hz complete all as specified and directed by Engr-in-Charge.

Taking down serviceable ceiling fan 1200 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades including scrapping of old paint and applying two coats of synthetic enamelled white paint over a coat of red oxide primer complete and refixing back at site with new clamps, nuts, washers, safety wire of size not less than 1.00mm & bolts including cotter pin for complete all as directed.

Taking down serviceable exhaust 300 mm sweep by disconnecting the electric power supply, unscrewing the bolts and nuts, removing the blades complete and refixing back at site with new clamps, nuts, washers & bolts complete all as directed.

Supply and fix in repair metal enclosure distribution board SPN, 12 way 240 volts, with 200 amps rated bus bar, double door suitable for mounting MCBs including taking down old MCB/DB complete all as specified and directed. Note-: Incoming & outgoing connections from yhe DB shall be provided with proper lugs/ thimbles etc

Supply and fix in repair MCB single pole 240 volts, 6 to 32 amps "B" series complete all as specified and as directed by Engineer-in-Charge

Supply and fix in repair single pole and netural 240 Volts 40 amps complete all as specified and as directed by Engineer-in-Charge

Supply and fixing in repair aluminium housing LED batten 22 /20 Watt mounted batten fitting 4ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

Supply and fixing in repair aluminium housing LED Smart bright batten 10 Watt mounted batten fitting 2 ft in length nano diffuser technology to ensure minimum loss in light transmitted, long life of over 30000 hours including lamp and connecting with twin core shethed cable from fitting to ceiling rose all as specified and as diected.

Supply and fix in repair surface mounted LED 12 w Round type downlighter with die cast aluminium housing coating prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

S&F in repair 25 W New genration energy saving & envoirmental friendly long life versatile pressure dia cast aluminium IP65 building secuirity luminaire with high power LEDs as light and electronic driver complete with necessary brackets (made out of 25 mm bore GI light grade pipe approx. 0.6 M long) nuts, bolts etc to be fixed as on walls complete as directed.

S & F in repair Wall light suitable for LED Lamps upto 20 Watt of B22 base, white colour provided with high output diffuser and metal base, prewired upto connection block and connecting with three core PVC copper flexible cable from ceiling rose to connector block, including taking down old unserviceable wall light fitting of any wattage, complete all as specified and directed by Engineer-in-Charge.

M&L in repair for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less thab 1.5 Meter below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 20 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as specified and directed electrical plate No. 3 of SSR part - I

Taking down serviceable geyser of capacity 25 ltrs by disconnecting the electric power supply, unscrewing the bolts and nuts,etc complete and refixing back at site with inlet/ outlet pipe , new clamps, nuts, washers & bolts complete all as directed.

M & L in repairs for sub main wiring complete with two runs of 6 Sqmm FRLS single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor (ISI Marked) drawn through and including concealed PVC conduit and all accessories fixed to wall/ roofs/ floors etc with one run of 6 sqmm FRLS single core multistranded copper conductor as earth continuity conductor, including dismantling unserviceable sub main wiring including accessories,complete all as specified and as directed by Engineer-in-Charge. Note : (1) Two runs of cable one run of conduit one run of earth continuity conductor shall be measured as one running metre.

All as per above item Sr No 136 but of size 4 sqmm complete all as specified and as directed.

Supply & Lay in repair XLPE insulated, heavy duty 1100 volt grade electric armoured LT UG cable with aluminium conductor of size 50 Sqmm 3.5 Core in trenches/along the wall/including making all connections, saddles, spacers including scaffolding if any required for saddling the cable in walls of building of height up to 25 meter, complete with aluminium lugs as required at site and as directed by Engr-in-Charge

Excavating in trenches, n exc 1.5 m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sqm on plan and n exc 1.5 m in depth and getting out Soft/loose Soil

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm soil / hard dense soil.

Removing excavated material not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point.Soft Soil / hard dense soil

Supply & lay cable protection pipe of HDPE double wall corrugated (DWC) incl couplers,bends etc of size 50 mm OD and ID 38mm confirming to IS 14930 -II and ISI Marked all specified and directed.

S&F tube light grade galvanised with all fittings laid in trenches of following size (a) 50 mm bore.

Material and Labour for cutting bituminous road at a width not more than 30cm and a depth not exceeding 60 cm for laying of pipes on road crossing for cable protection and making good with cement concrete 1:2:4, type, B-2 to match the existing surfaces of the road all as specified and as directed by Engineer in charge.

SUBHASH ARORA CONSTRUCTION CO (BID ID -3343927)

Sree Tirumala Enterprises (BID ID -3344404)

MAJUMDAR FURNITURE (BID ID -3337177)

Hindustan Traders (BID ID -3352362)

T.THIYAGARAJAN (BID ID -3342833)