33-11 KV Sub station and 33 and 11 KV Line

Amount

SUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33/11 KV Transformer 5 MVA

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1A

33 KV CT 200/1A

33 KV 1 Ph PT 33 KV/110 V

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) 11 KV Bus coupler (1250A)

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11KV Cable jointing kit. Heat Shrinkable:- (i) 300 Sq.mm Indoor

(ii) 300 Sq.mm Outdoor

(iii) 185 Sq.mm. Indoor

(iv) 185 Sq.mm. Outdoor

Making of 11 KV Cable Box and mounting on Switch Gear and Transformer

11/0.4 KV, 63 KVA Transformer.

33 KV Terminal Gantry with Plinth & Foundation as per RESSPO Schedule

Main Bus Bar complete with Structure. Plinth & Foundation as per RESSPO Schedule

Structure for Line & Bus Isolator. with Plinth & Foundation

33 KV Post Insulator

Structure for Post Insulator with Plinth & Foundation

Structure for Lightening Arrestors with Plinth & Foundation

90 Lbs. Rail pieces for T/F

CT Steel structure with Plinth & Foundation

Structure for P T with Plinth & Foundation

33 KV Fuse Set

Structure for fuse Set with Plinth & Foundation

24 V Battery with Battery Charger and Cabinet.

Control Cable 4 × 2.5 Sq.mm.

Control Cable 2 × 2.5 Sq.mm.

L.T.P.V.C. Cable 3½×70 mm2

Earthing of Sub-Station:-(As per RESSPO Schedule) (i) Earth Mat for outdoor equipment

(ii) Earth Mat for indoor equipment

Pipe Earthing of Power Transformer by way of boring and lowering of “B” class G.I. pipe 50 mm. dia. into the ground up to the water level to the lower end of which a solid copper con approx 9 inches long and 750 gram in weight provided and screwed in connecting and bringing out continuous copper wire 8 SWG from the cone to the ground surface where it will be bolted to the G.I. Earth strip for Transformer neutral connection. The earth strip will be welded to the G.I. pipe. The work also includes cap and clamp for pouring water, the cost of all material with all labour and T&P etc. complete in all respect.

Chemical Pipe Earthing

Painting of Sub-Station structure & Equipment

PG Clamp

33 KV Polymeric Disc Insulators B&S Type 7000 Kg. for Main BusBar

Disc Fittings for Dog/Raccoon 7000 Kg. for Main BusBar

CONDUCTOR A.C.S.R. Dog conductor for switch yard

Polymeric 33 KV Pin Insulator

"L" Type Structure for Neutral : Fabrication and grouting of Channel 100x50x6 mm. in L shape & in proper size and alignment to provide support for separate Earthing strips for power transformer neutral including supply & fixing of flexible copper earth braid (0.5 Mtr. long 65x8 mm size) bonds for neutral Earthing. Making delta by 6 nos. earthing electrodes of 32 mm dia. (including fabrication of earthing electrodes) will be connected to neutral earthing through separate earthing strip (as per RESPO). The work also includes painting of Channel with two coats of aluminium paint and the cost of all material with all labour and T&P etc. complete in all respect.

Structure For cable support : Fabrication and erection of cable support made of two pieces of 100x50x6 mm. (4.5 x 2 No. = 9.0 mtr. long), joined to each other by means of 5 Nos. flat 50x6 mm. pieces of size 150 mm. long each by welding at equal intervals as per drawing and exacavation of earth in all type of soil (0.75x0.7x0.5 Mtr.) and grouting and plinthing of cable stand (1x0.75x0.5 Mtr.). Above work also include two coats of Aluminum paint and the cost of all material with all labour and T&P etc. complete in all respect.

PLINTH OF 5 MVA, 33/11 KV TRANSFORMERS : Construction of plinth of size 3.46x4.46 Mtr. for 5 MVA Transformers as per Resspo norms.

Plinth & Foundation of 33 KV VCB

11 KV Cable laying Including cost of sand and Bricks

Cost of Furniture for control room (Steel table, chair, branch & rack) : (Office Chair with arms made of Wooden with proper cane seat & back. - 2 no, Office Table having size 1520 x 900 x 760 mm. made of Steel Pipe in square shape having two No. Drawers & 10 mm. Top Board with Sun mica. - 2 No., Sitting Bench made of Steel Pipe of size 183 x 450 mm. with three seats with Sun mica - 1 No., Stool of size 450 x 300 x 455 mm. having sitting top of 12 mm. Board with sun mica. - 2 No., Office rack made of Steel Pipe & M.S. Sheet of size 750 x 900 x 400mm. - 1 No Cost of Fire Fighting equipment with stand complete : Fire extinguisher CO2 type 5.0 Kg. capacity I.S.I. mark. - 1 No, Fire extinguisher CO2 type 4.5 Kg. capacity I.S.I. mark. - 1 No., Fire Bucket stand size 1500x1200mm. having M.S. Channel 100x50 mm base with cross triangular bracing of M.S. Angle 50x50x6 mm and base of 100x50 mm. Channel 600 mm long having pipe 25 mm and boxing pipe of size 32 mm. including welded with M.S. hooks rigidly and nicely painted with one coat of red oxide primer & two coat of red enamel paint Sundry Charges

Sundry Charge

Survey and lay out of Sub-station

Testing & commissioning charges of Substation.

33 KV LINE :- 11 Meter long STP (SP-55)

13 Meter long STP (SP-70)

ACSR DOG CONDUCTOR (3.0 X 3 + 3% Sag and Jumpering)

33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.

Polymeric 33 KV Pin Insulators

33 KV Disc Fitting B & S Type – 70 KN

33 KV Polymeric Disc Insulators B&S Type 70 KN

33 KV 'V' Type X-arm

33 KV Cross arm holding clamp with nuts, bolts & washers

" F " bracket for 33 KV line

" E " bracket for 33 KV line

Armour rod with ferrule for Dog conductor

Angle 65x65x6 mm, 4300 mm long for bracing with clamps

Top Channel 125x65 mm, 3200 mm long with 2 nos clamps

Droper Channel 100x50 mm, 3000 mm long with 2 nos clamps

P.G. clamps for Reccoon/Dog

G.I. Nut, bolt with washer

Guarding Angle 65x65x6x2600 mm

Holding clamp for guarding angle with nuts & bolts

G.I. Barbed wire

G.I. Wire No. 6 SWG

G.I. Wire No. 8 SWG

G.I. Wire No. 16 SWG

Stone Pad (300x300x75 mm.)

33 KV Number plate with clamp with nuts, & bolts

33 KV Danger board with clamp with nuts, & bolts

Alluminium binding wire- 6 SWG

Alluminium paint

Red oxide paint

Turn Buckle

Eye bolt 12 x 110 mm

33 KV Heat Shrinkable Jointing Kit Outdoor Type for 33 KV, 3x300 Sq. mm. XLPE Cable

Clamps for fixing of cable and cable box

Supply of HDPE Pipe PN-6, 160mm dia Pipe for laying of 33KV, 3x300Sq.mm

Clamps for holding of H.D.P.E. Pipe

Earthing of Pole by M.S. earthing Rod of 20 x2500 mm and 6 SWG earthing wire etc.

Stay Complete (G.I Stay rod 20x1800 mm, Stay Insulator, Stay wire 7/8 SWG and Stay clamp, concreting, Nut, bolt with washer)

Concreting of S.T. Pole 11.0 Mtr. long

Concreting of S.T. Pole 13.0 Mtr. long

Tree cutting compensation

Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 33 KV XLPE cables of sizes 3x300 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground below the Railway Track/Highway/Road or as per drawing approved by Railway/Highway/Road by HDD Method along with laying of 33 KV, 3x300 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 33 KV, 3x300 sq.mm. XLPE Cable underground in trunches.

Laying of 33 KV, 3x300 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure

Laying of 33 KV, 3x300 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Road Restoration Charge (Pakka Road)

Cable Route Marker

11 KV LINE :- 8.5 Mtr. Long PCC Pole

11 Mtr. Long STP Pole (SP-55)

13 Mtr. Long STP Pole (SP-72)

ACSR Rabbit Conductor (9.750x3+3% Sag and Jumpering + 1.000x6+3% Sag and Jumpering)

11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable

LT Al. XLPE Insulated cable 1x50 Sq.mm

LT Al. XLPE Insulated cable 3.5x70 Sq.mm

11 KV TPMO with fixing clamp complete

11 KV Fuse set

11 KV Disc fitting B&S Type 45 KN

Polymeric 11 KV Pin Insulator

11 KV Polymeric Disc Insulator B&S type (45 KN)

Top Channe 100x50x6mm, 2240mm with clamp, bolts ,nuts & washers

Dropper Channel 100x50x6mm, 2028mm Long with clamp, bolts ,nuts & washers ( For Fuse set)

11 KV V-Type X-arm

Angle Iron 65x65x6mm, 2700mm Long bracing Complete with Clamps

Angle 65x65x6mm, 2028mm Long for G.I. Pipe [email protected] Kg./M

T-Off Channel 100x50x1300mm with Clamp nut& bolt

Guarding Angle 65x65x6x2600 mm

Holding clamp for guarding angle with nuts & bolts

F-Bracket with Bolt & Nuts 11KV Line

E-Bracket with Bolt & Nuts 11KV Line

Clamp for fixing X-arm with Nuts & Bolts

Holding Clamp with nuts & bolts

Painting number mark with paint

11 KV Danger Board with Nut & Bolt

PG clamps

GI Wire 8 Nos.

GI Wire 10 SWG.

G.I. Wire No. 16 SWG

GI Barbed Wire

Stone Pad (300x300x75mm)

Al. Binding wire -6 SWG

Supply of HDPE Pipe 140mm dia

Clamps for holding of HDPE Pipe

Eye Bolt

Turn Buckle

Al. Paint

Red Oxide Paint

11 KV Heat Shrinkable cable boxes for 11 KV Cable XLPE 3 x 185 Sq mm

Clamps for fixing of Cable and cable boxes

Earthing of Pole by MS earthing rod of 20x2500mm. & 6 SWG earthing wire etc.

Stay Complete (GI Stay Rod 16x1800mm, Stay Insulator, Stay wire 7/10 SWG and Stay clamp, concreting, Nut, bolt with washer)

Concreting of Supports (8.5 Mtr. PCC)

Concreting of Supports (11 Mtr. STP)

Concreting of Supports (13 Mtr. STP)

Digging of trench and Laying of 3x185 sq.mm. cable in H.D.P.E Pipe 140mm dia below ground level as per Resspo norms/site requirement by open trench Method, back filling of earth, ramming and dressing properly complete Job

Digging of Trench by excavation of earth laying of brick on both side, filling of sand, laying of cable put the sand & brick on cable & earth ramming and dressing properly with complete job for laying 11 KV XLPE cables of sizes 3x185 Sq.mm. including cost of bricks, sand, clamps etc.

Laying of H.D.P.E. Pipe underground below the Highway/Road or as per drawing approved by Highway/Road by HDD Method along with laying of 11 KV, 3x185 Sq. mm. XLPE Cable in H.D.P.E. Pipe

Laying of 11 KV, 3x185 sq.mm. XLPE Cable underground in trunches.

Laying of 11 KV, 3x185 XLPE Cable with H.D.P.E. Pipe on Double Pole Structure

Laying of 11 KV, 3x185 XLPE Cable in Air on Double Pole Structure & filling of cable joint kit with proper dressing.

Cable route marker

Transformer earthing complete (chemical pipe earthing as per spe.)

Plinth with RCC Top 2x2x1.5 Mtr.

11 KV Lightening arrestor

Copper L-Piece 400x50x6 m.m. for LT bushing rod of T/F

Al. crimping lugs 35 sq.mm.

Al. crimping lugs 50 sq.mm.

Al. crimping lugs 70 sq.mm.

SMC MCCB Distribution board (1 No. I/C & 3 No. O/G)

Tree cutting compensation

Road Restoration Charge (Kachha Road)

Road Restoration Charge (Pakka Road)

Bolts ,Nuts & Washer

LT Clamp with nuts & bolts for PCC Poles.

2x4 sq.mm. PVC armoured Cable

D.P. Switch 63 A

Rest for DI Board, D.P. Switch 32A-1, D.P. Switch 16 A-1, Kit Kets-6 including wiring.

LED light 100 Watt complete with fitting and accessories

Carriage of following material from Center Store to SiteSUB-STATION PART:- 33 KV Line Isolator.

33 KV Bus Isolator.

33 KV Lightening Arrestors

33 KV VCB 800A, 750MVA with Steel structure

Control panel I/C for 33 KV single T/F

Control panel I/C for 33 KV double T/F

33 KV CT 400/200/1A

33 KV CT 200/1A

33 KV 1 Ph PT 33 KV/110 V

33 KV Fuse Set

11 KV SWITCH GEARS VCB:- (i) Incoming VCB 600/300/5A, 350MVA, I /C

(ii) Outgoing VCB 200/100/5A, 350MVA

(iii) 11 KV Bus coupler (1250A)

11KV 3 Core XLPE Cable:- (i) 3 × 300 Sq.mm

(ii) 3 × 185 Sq.mm

11/0.4 KV, 63 KVA Transformer.

L.T.P.V.C. Cable 3½×70 mm2

CONDUCTOR A.C.S.R. Dog conductor for switch yard

33 KV LINE :- 11 Meter long STP (SP-55)

13 Meter long STP (SP-70)

ACSR DOG CONDUCTOR (3.0 X 3 + 3% Sag and Jumpering)

33 KV XLPE Insulated Al. Cable 3 x 300 sq. mm.

33 KV 'V' Type X-arm

11 KV LINE :- 8.5 Mtr. Long PCC Pole

11 Mtr. Long STP Pole (SP-55)

13 Mtr. Long STP Pole (SP-72)

ACSR Rabbit Conductor (9.750x3+3% Sag and Jumpering + 1.000x6+3% Sag and Jumpering)

11 KV 3 Core Al. XLPE Insulated 3x185 Sq.mm Cable

LT Al. XLPE Insulated cable 1x50 Sq.mm

LT Al. XLPE Insulated cable 3.5x70 Sq.mm

11 KV TPMO with fixing clamp complete

11 KV Fuse set

11 KV V-Type X-arm

AMIT ENGINEERING CORPORATION (BID ID -5530005)

shiva engineering AND suppliers (BID ID -5535149)

NATIONAL CONTRACTOR & GENERAL ORDER SUPPLIER (BID ID -5535579)

M/S Sengar Enterprises (BID ID -5535691)