Addition or alteration and upgradation to Kripa School for day boarding facilities and therapies etc, Delhi Cantt

Amount

Demolition of cement concrete of any description and in any position not otherwise specifically provided for

Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided for

Demolition in integral cement based water proofing treatment over roof (brick coba) averaging 25 mm to 150 mm.

Dismantling, MS work of any description including MS reinforcement laid/ provided in any position

Dismantling of exisitng water tanks upto 1000 ltrs placed at roof including demolition of platforms and disconnecting all water connections and depositing the same to CB Store.

Dismantling of brick work or stone/boulder masonery, built in any cement mortar including all quoins, arches, pillars, etc. but excluding ashlar facing, dressed stone work and precast concrete articles.

Shifting of 20 KW capacity Solar PV System consisting of 78 numbers of Solar Panels, angle iron stands, logger panel and XLPE insulated cable connected between panels and net meter and other acccessories by dismantling the system carefullywithout causing any damage and storing the panels carefully for use at later date. Thereafter reinstalling the system on other roof top by refixing the existing stand and solar panels over it on specified latitude-longitude and connecting the system with net meter, logger panel and making it fully functional as specified and directed by Engineer-in-charge

Excavation over areas, not exceeding 1.5 mt deep and getting out in any type of soil/ soft disintegrated rocks.

Excavation in trenches, not exceeding 1.5 mt wide and not exceeding 1.5 mt in depth; for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqmt on plan and not exceeding 1.5 mt in depth and getting out in any type of soil/ soft disintegrated rocks

Returning, filling in earth, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick.

Providing cement concrete in foundations, filling and mass-concrete type D-2, 1 : 4 : 8 mix (1 cement :4 coarse sand : 8, 40 mm graded stone aggregate).

M&L, cement concrete in surface channels and drains. Type B-1, 1 : 2 : 4 (1 cement : 2 Coarse sand : 4, 20 mm graded stone aggregate) including finishing surface even and smooth with extra cement as floating coat.

Providing cement concrete in roof kerbs or mud stops, rounded or chamfered on edge with B-1 Type, 1 : 2 :4 mix (1 cement : 2 coarse sand : 4, 20 mm graded stone aggregate).

M&L Autoclaved Areated Cement blocks masonary with AAC blocks of any thickness in superstructure, above plinth level, in cement mortar 1:4 (1 cement : 4 coarse sand) including providing and placing in position 2 nos 8 mm dia M.S bars at every third course of masonry work. (MS bars shall be paid separately) complete all as directed by Engineer-in-charge

Providing cement concrete in lintels up to 1.5 mt. clear span, cills, steps, seismic and other similar bands , plinth courses, string courses, lacing courses parapets and railings up to 60 cm in height, copings, kneelers, apex stone, bed plates, kerbs water troughs and the like including weathering, slightly rounded or Chamfered angle and throating as directed by Engineer-in-Charge with B-1 type 1 : 2 : 4 mix (1 cement : 2 coarse sand : 4, 20 mm graded stones aggregate). Including hold fast concrete.

Providing & laying Reinforced Cement Concrete in foundation and including rafts, footings, foundation beams, plinth beams, bases for columns etc.; and mass cement concrete using M-25, Design mix concrete.

Providing and laying Reinforced Cement Concrete in domes, vaults, shell roof, arch ribs and folded plates using M-25, Design Mix Concrete

Do- but Reinforced Cement Concrete in slabs; supported on walls, beams and columns; in floors, roofs, landings balconies, canopies, deck slabs and in shelves and the like, with using M-25, Design mix concrete.

Do- but Providing Reinforced Cement Concrete in chajjas using M-25, Design mix concrete.

Do- but providing reinforced cement concrete in beams, cantilevers, brassummers, lintels over 1.5 mt span with using M-25, Design mix concrete.

do—but providing reinforced cement concrete lintels beam with curvature/arch finish in any span size as per design & as directed by Engineer in-charge using M-25, Design mix concrete.

Providing Reinforced Cement Concrete in columns, pillars, piers, posts and struts using M-25, Design mix concrete.

Do- providing Reinforced Cement Concrete in chullah hoods; stairways (except spiral staircases) including steps (Square or spandril), string pieces, carriages, etc, but excluding landings; RCC water tanks up to 1500 liters with using M-25, Design mix concrete.

Providing & laying reinforced cement concrete in fins, fascias, louvers, parapets, and railings exceeding 60 cm in height, newels, balustrade, and the like with using M-25, Design mix concrete.

Supply and mixing integral water proofing compound conforming to IS 2645-1975.

M/L Brick work with classs designation 100 built in cement mortar 1:4 ( 1 cement : 4 coarse sand) complete all as directed by the Engineer-in- Charge.

do- as item 18 but brick work in half brick wall, with cement mortar 1:4 (1 cement :4 coarse sand) all as directed by Engineer-in-charge.

Form work to sides of concrete foundations footings, bases of columns, raft and raft beams sides and soffits (if any) or foundation and plinth beams, and similar work; vertical or to batter for fair finished surfaces.

Form work to sides of pillars, posts, struts, piers, columns and stanchions for fair finished surfaces of concrete rectangular, square or polygonal shape for fair finished surfaces.

M& L ,Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (horizontal or sloping) for fair finished surfaces.

M& L , Form work to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc, also splays between floors and beams, etc. for fair finished surface.

Form work to edges of concrete flats, treads, break in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc. 10 cm but not exc. 20 cm wide for fair finished surfaces.

Form work to Chulla hoods, chhajjas, troughs and similar items including edges for fair finished surfaces.

Form work to sides & Soffits of domes, vaults, shell roof and arch ribs curved in one or two planes

M & L, Form work to staircases with sloping or stepped soffits including risers and stringers (excluding landing) for fair finished surfaces.

Supplying and fixing plain, solid , straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints with 1st class hardwood complete as directed by the Engineer-in-charge

Supplied and fixed 40 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, with decorative face veneers on both sides. Approved makes : National Plywood Industries, Centuary Plyboard (India) Pvt. Ltd., Sarda Plywood Industries Limited, Kitply Industries Limited, Duroply Industries Limited, Greenply Industries Limited.

M&L for preparation of treated wooden surfaces and applying two or more coats of melamine polishing of any description, width or girth including cleaning. Shade of the polish shall be as directed by Engineer in Charge.

Supply and fixed mild steel butt hinges bright polish and fixed type B 12 , 100 mm size

Supplied and fixed 200 mm Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed.

Supplied and fixed 300 mm Brass, sliding door bolt with sand or die cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed.

Supplied and fixed 150 mm extruded brass handle, fabricated type polished.

Supplied and fixed 100 mm extruded brass handle, fabricated type polished.

Supplied and fixed floor door stopper of brass body and tongue with hard drawn steel spring 140 mm long, fixed to doors.

Supplying and fixing door closer of aluminium body hydraulically regulated, designation No. 3, universal type, suitable for door shutters of any weight between 61 kg to 80 kg and fixed.

Providing and fixing bright finished brass 100 mm mortice lock with 6 levers and a pair of handles, knob type with first class imported teak wood knobs, all as per approved design and instructions of Engineer-in-Charge.

Supplied and fixed locks of brass for cupboards of grade-I size upto 50 mm of four levers.

Supplied & fixed mild steel framed work in roof trusses with rolled sections, MS pipes/ tubes, purlins, angles, cleats, foundation bolts, Anchor bolts, framed work in doors or gates, and framed work in grills, gratings, framed guard bars, ladders, railings and like works with Fe-410-W(gde-E-250, quality A) or Fe-290 (Gde-E-165) steel complete as directed by Engineer-in-charge.

Mild steel TMT bars( FE 500) 8 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips including stirrups, spacers and binders.

Providing and fixing powder coated Aluminium ( minimum thickness of powder coating 50 micron ) work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make confomring to IS : 733 and IS : 1285 fixing with dash fasterners of required dia and size, including hinges necessary filling up the gaps at juncitons, i.e. at top. bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight , mitred and jointed mechanically whereever required including cleat angle, Aluminium snap beading for glazing /paneling CP brass/stainless steel screws, all complete as per architectural drawings and the direcitons of Engineer-in-charge. ( Glazing , paneling and dash fasterners to be paid for separately)

for fixed portions

For Shutters of doors , window and ventilators including providing and fixing hinges/pivots and making provision for fixing of fittings whereever required including the cost of EPDM rubber/neoprene gasket required , powder coated (fittings shall be paid for separately).

Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations.(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/Sqmt of cement admixed with proprietary water proofing compound conforming to IS-2645 over the RCC slab including cleaning the surface before treatment.(b) Laying cement concrete using broken bricks/brick bats 25 mm to 100 mm size with 50% of cement mortar 1:4 (1 cement : 4 coarse sand). The top surface of concrete plastered with 20 mm thick plaster in cement mortar 1:3 (1 cement : 3 coarse sand) and admixed with proprietary water proofing compound conforming to IS :2645 to required slope and treating similarly the adjoining walls up to 300 mm height including rounding of junctions of walls and slabs.(c) After two days of proper curing applying a second coat of cement slurry admixed with proprietary water proofing compound conforming to IS : 2645.(d) Finishing the surface with 20 mm thick joint less cement mortar of mix 1:4 (1 cement : 4 coarse sand) admixed with proprietary water proofing compound conforming to IS : 2645 and finally finishing the surface with trowel with neat cement slurry and making of 300 x 300 mm square.(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge.With average thickness of 120 mm and minimum thickness of khurra as 65 mm.

Supplied and fixed of 160 mm internal dia unplasticised-rigid PVC rain water pipes (Makes : Astral, Supreme, Finolex, Prakash, Surya) conforming to IS 13592 Type ‘A’ including joining with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion.

P&F, unplasticised PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipe conforming to IS 13592 Type ‘A’ including jointing with seal ring conforming to IS 5382 leaving 10 mm gap for thermal expansion,

(a) 160 mm dia coupler.

(b) 160 mm bend 87.5 degree.

(c) 160 mm heel rest bend.

M&L, Granite stone pre-polished slab Machine cut(of any shade / colour/texture) 18 mm thick machine cut, in flooring, stair case, counters, skirting / dado/treads/ risers of steps & like laid over screed bed of minimum 20 mm thick in cement mortar 1:4 (1 grey cement : 4 coarse sand) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone.

M&L, Kota stone (Size 22"x 22" or above) polished slab Machine cut(of any shade / colour/texture) 18 mm thick machine cut, in flooring, stair case, counters, skirting / dado/treads/ risers of steps & like laid over screed bed of minimum 20 mm thick in cement mortar 1:4 (1 grey cement : 4 coarse sand) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of kota stone. (No extra payment for making borders with other stone shall be payable)

Granite finish polishing , mirror finish, for Kota stone complete as directed by Engineer-in-Charge.

Material & labour white marble stone 18 mm thick machine cut (in narrow width), in flooring, stair case, counters, skirting / dado/treads/ risers of steps & like laid over screed bed of minimum 20 mm thick in cement mortar 1:4 (1 grey cement : 4 coarse sand) and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble stone.

M&L, Vetrified tiles (coloured or printed) of size 600x600x9 mm thick, laid on floor, treads of stair case on screed base of 20 mm thick cement mortar in 1:4 (1 cement : 4 coarse sand ), jointed in cement slurry and pointed in white cement to match laid in pattern including forming 3”- 4” wide border in pattren

a) Light shade

b) Dark coloured shades

(ii) Making nosing in granite stone/ kota stone half round.

M&L, 40 mm thick cement concrete type B-1, 1 : 2 : 4 (1 cement : 2 coarse sand : 4 - 20 mm graded stone aggregate) in flooring and finished the surface even and smooth without using extra cement.

S/F Joint less Designer Ceramic wall tiles confirming to IS : 15622 of Ist quality & of design, colour, shade and texture as approved by Engineer-in-Charge of size 12” x18” & 8mm or 12”x 24’ & 8 mmthick laid over rendering of 15 mm thick cement mortar 1:3 (1 cement :3 coarse sand ) and jointed with providing cement slurry @ 3 Kg/sqm and pointing the surface with white cement mixed with pigment to match the shade of tile complete all as directed by Engineer-in-Charge.

Rendering 10 mm thick cement plaster in 1 : 1 : 2 (1 cement : 1 coarse sand : 2 fine sand ) cement mortar. On ceiling of concrete surfaces and rendering is to be finished even and smooth without using extra cement

M/L, Rendering 15 mm thick cement plaster in 1 : 2 : 4 (1 cement : 2 coarse sand : 4 fine sand) over internal surfaces cement on fair faces of brick work or concrete surfaces and rendering is to be finished even and smooth without using extra cement

M/L, Rendering 15 mm thick cement plaster in 1 : 4 cement mortar over external surfaces on brick wall and concrete surfaces and finishing surface even and smooth without using extra cement.

M/L, Rendering 15 mm thick cement plaster in 1:4 cement mortar(1 cement:4 coarse sand) on brick walls or concrete surfaces and render is to be finished even and smooth with floating coat of neat cement.

Supplied and fixed glass dividing strips 4 mm thick and 38 mm wide fixed in position as per approved design as directed by Engineer-in-Charge

Preparing new surfaces and applying two or more coats of interior grade plastic emulsion over walls upto the entire satisfaction of Engineer-in- Charge.

Preparing old surfaces and applying two or more coats of interior grade plastic emulsion over walls upto the entire satisfaction of Engineer-in- Charge.

Preparing new surfaces and applying two or more coats of exterior grade plastic emulsion over walls upto the entire satisfaction of Engineer-in- Charge.

Preparing old surfaces and applying two or more coats of exterior grade plastic emulsion over walls upto the entire satisfaction of Engineer-in- Charge.

Preparing new surfaces and applying two or more coats of oil bond distemper over a coat of cement primer over ceilings upto the entire satisfaction of Engineer-in- Charge.

Preparing old surfaces and applying two or more coats of oil bond distemper over a coat of cement primer over ceilings upto the entire satisfaction of Engineer-in- Charge.

Preparing steel surfaces of any description and applying one coat of red oxide primer and two or more coats of approved synthetic enamel paint upto the entire satisfaction and Engineer-in- Charge.

Suppling and fixing 200 mm dia U-PVC pipe (SCH-80) laid & jointed with collars and tested complete as per direction of Engineer-in-Charge.

Suppling and fixing 150 mm dia U-PVC pipe (SCH-80) laid & jointed with collars and tested complete as per direction of Engineer-in-Charge.

Providing and fixing square mouth S.W. gully trap grade 'A' complete with C.I. Grating brick masonry chamber with bricks of class designation 75 and water tight C.I. Cover with frame of 300 x 300mm size (inside) the weight of cover to be not less than 4.5 kg. and frame to be not less than 2.70 kg. as per standard design. a) 180 x 150mm size P-type with FPS bricks

S&F of SFRC precast cement concrete covers and frames with fiber as per IS 12592 (Part I)

(a) circular manhole cover and frames 560 mm dia clear opening heavy duty.

Making connection of drain or sewer line of 250 mm dia with existing manhole including breaking into and making good the walls, floors with cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) cement plastered on both sides with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement and making necessary channels for the drain etc. complete. All expenses for making this connection including taking approval from local authorities shall be borne by the contractor.

Providing and fixing SMC panel water tank of 27 KL capacity (Sintex make or equivalent) with fittings for inlet, outlet,Over flow,drain, vents, float valve connections of required size and dia. and connection from top for level controller and hoisting/fixing the same tank on roof and/or other places at all heights with all bye-works complete as per manufacturer's specification and direction of the Engineer-in- Charge. (Support of tank on brick/RCC/PCC will bepaid under relevent items)

Making khuras 45 cm × 45 cm with average minimum thickness of 5 cm cement concrete 1 : 2 :4 Type B-0 using 12.5 mm graded stone aggregate over PVC sheet 1 mt × 1 mt × 400 micron, finished with 12 mm cement plaster 1 : 3 and a coat of neat cement rounding the edges and making and finishing the outlet complete.

S&F, chicken mesh of galvanized mild steel wire, fixed on junction of brick work and RCC columns, beams.

M&L, mild steel round bars 6 mm dia cut to length, bent to shape required including cranking etc for half brick wall masonry , all as specified and directed by Engineer-in-Charge.

Supplying , fabrication and installation of stainless steel railing/ gates as per ornamental design ( 304 grade ) fabricated with standard tube, pipe , piles , solid sections stainless steel welded and grinded, with smooth bend & curved at turning as per design, polishing complete to give I class finishing look, fixed with base slab/concrete or side wall/RCC by suitable fasteners complete as directed by Engineer–in-Charge

Providing, fixing and testing PVC pipes 110 mm dia in any length with or without ears, with suitable joints, laid in trenches or in floors/ walls.

Supplying and fixing 110 mm dia sand PVC bends.

Supplying and fixing 110 mm door bends of PVC

Supplying and fixing 110 mm PVC Collar.

Supplying and fixing 110 mm sand PVC pieces single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches.

Supplying and fixing 110 mm PVC door tee.

Material and Labour, 110 mm PVC Nahani trap with grating of chromium plated including joining to waste pipe

Providing and fixing vitreous chinaware white/ colour floor mounted type European water closet with matching cistern of dual flush type, 3/6 litres capacity, concealed flush pipe all complete with C.P. bolts & nuts and matching seat cover with C.P. hinges, rubber buffers etc. complete in all respects. Hindware Cat No. 20024 or Parryware cat. no. Cascade NXT Range (C0232 WC + C0711 Cistern + C2054 lid) or Cera cat no. Clair (2015 EWC + 2115 Cistern + 2315 Seat cover + 2205 Twin flush fittings).

Providing and fixing coloured Vitreous China urinals , bowl type flat backof size 465x355x265 mm( minimum) with gratings andunion for discharge pipe and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement: flush pipe, complete

S& Fixing automatic cistern of 10 ltr. Capacity including brackets complete.

Providing and fixing 15 mm C.P. brass angle valve with C.P. brass connection pipe with union nuts complete with C.P. brass flange (Parko or approved equivalent) including cutting and making good the walls where ever required.

Providing and fixing white/ glazed vitreous china wash basins flat back, size 630 x 450 mm including waste fittings ,waste pipe ,chain and plugs and porcelain stopper and brackets complete.

Providing and fixing stainless steel sink 1.00 mm thick for kitchen or laboratory with plug washers waste pipe , cast iron cantilever brackets, connecting union overall size 495x420 mm with bowl size 410x 330x160 mm. complete.

Providing and fixing 15 mm dia CP brass long body bib tap for sink Parko or approved equivalent including cutting and making good the wall wherever required.

Providing and fixing 15 mm dia CP brass piller tap Parko or approved equivalent including cutting and making good the wall wherever required.

Providing and fixing 600 x 20 mm size C.P. brass towel rails Parko complete with C.P. brass brackets fixed to rawl plug of approved design with C.P. brass screws.

Providing and fixing wall to wall 6 mm copper backed float glass mirrors complete with 6 mm thick BWP type ply board, 40 mm stainless steel channel plugged to wall, with hard wood treated with two coats of wood preservative etc. all complete.

Supplying and fixing stack clamp out of 25 mm × 4 mm flat iron and 12 mm dia round iron stays for 160 mm bore including bolts and nuts and securing and of stays to wall

Providing and fixing chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.

a) 20 mm nominal bore

b) 25 mm nominal bore.

c) 40 mm nominal bore

Material and Labour for providing 20mm x20mm x4mm thick Glass Mossaic tiles in skirtings , risers of steps and dado , Sub base shall be 15mm thick bed / rendering of cement mortar 1:3 ( 1 cement : 3 coarse sand ) leveled in plumb to receive Glass Mossaic tiles . Glass mosaic tiles shall be jointed and pointed with Latiecrete adhesive complete as per manufacturer instructions all as specified / directed by Engineer in charge . Glass mosaic tiles shall be of any colour , pattern and design as approved by Engineer in charge.

Material and Labour for providing 20mm x20mm x4mm thick Glass Mossaic tiles on walls in any shade and colour , pattern i/c printing/forming of murals , maps, sceneries, diagrams, pictures of any description and choice as directed by the Engineer in charge , Sub base shall be 15mm thick bed / rendering of cement mortar 1:3 ( 1 cement : 3 coarse sand ) leveled in plumb to receive Glass Mossaic tiles . Glass mosaic tiles shall be jointed and pointed with Latiecrete adhesive complete as per manufacturer instructions all as specified / directed by Engineer in charge . Glass mosaic tiles shall be of any colour , pattern and design as approved by Engineer in charge.

Supply and fixing of A.C.P. sheeting in intricate, ornamental design in narrow widths to be provided on a octagonal / tetragonal framed section fixed over columns at the height varying from 4 mtr to 6.00 mtrs as per architectural design including cost of wastage of sheet for hexagonal / octagonal profile including aluminium tubes for fixing of grills ACP panels, cost of sealant in joints and scaffolding etc required for fixing.

Having plain texture

Having wood grains texture.

Providing and installation of 16mm thick Microcell Polycarbonate single panel sheet, width shall not be less than 900mm to ensure best performance under wind uplift, viberation and visual appearance. The panels shall be uniform in colour with an integral Microcell/Multicell. Colour of sheet shall be approved by client / concultant. Panels shall be manufactured with vertical standing seam with maximum height 15mm at both sides of the panel. Snap-on polycarbonate connector to interlock the panels shall have a double tooth grip lock locking mechanism to ensure maximum uplift capability (strength). Panel shall be con-extruded with special antiglare compound to make it anti glare/soft light to prevent glare and sun streaks. Panel shall be with aluminium end cap of U profile (mill finish) for ends flashing. Panel shall be co-extruded 99.9% on both sides UV protected, U-value= 1.53/1.62(w/m 2 K). Panel shall be fixed over structural steel pulins with Trapezoidal heavy duty stainless steel fastner (Z type) with flat head screws (4.8* 19mm-3 nos. minimum). Fixing method shall be strictly followed as per manufacture guide lines, including transportation, delivery at site, unloading storage and handling at site, sheet shall be bend and cut as per drawings, site assembly and finally erection at appropriate location. The work shall be completed in all respects as per drawings, technical specification, approved make and direction of the Engineer-in-Charge. (Net laid area to be measured for payment) Approved Make:1) Dan Pal (India) Private Limited 2) Coxwell Domes Engineers Private Limited.

Providing and fixing Wood Polymer Composite Board (Plastic Board) 25 mm thick water proof board fixed for wooden almirah and like as per direction of Engineer-in-Charge.

Supplying and filling hard core of gauge (broken bricks) of n.exc.63 mm, deposited, spread and levelled in layers n.exc. 15 cm thick, watered and rammed to a true surface

Supplying and fixing chequered cement concrete tile 20 cm x 20 cmx 25 mm thick or 25 cm x 25cm x 25 mm thick set jointed and pointed in neat cement slurry in floors over 20 mm thick 1:4 cement mortar screed bed.

Supplying and fixing continous (piano) hinges 40 mm wide mild steel bright finish or electrogalvanised

Removing surplus/ excavated materials & disposal outside Cantonment limits under contractor own arrangements as directed by Engineer-in-charge.

Providing and laying in position ready mixed plain cement concrete, M-10 using fly ash and cement content as per approved design mix and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for plain cement concrete work, including pumping of R.M.C. from transit mixer to site of laying and curing, excluding the cost of centering, shuttering and finishing, including cost of curing, admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Note : 1) Excess/less cement used than specified in this item is payable /Recove -rable separately. 2) Fly ash conforming to grade I of IS 3812 (Part-1) only be used as part replacement of OPC as per IS : 456. Uniform blending with cement is to be ensured in accordance with clauses 5.2 and 5.2.1 of IS: 456 -2000 in the items of BMC and RMC. (cement content considered @ 240 kg/cum)

Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using fly ash and cement content as per approved design mix, and manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying, excluding the cost of centering, shuttering, finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate / retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer - in - charge. Note:- (1)Cement content considered in this item is @330 kg/ cum. Excess/ less cement used as per design mix is payable /recoverable separately. (2) Fly ash conforming to grade I of IS: 3812 (part-1) only be used as part replacement of OPC as per IS: 456. Uniform blending with cement to be ensured in accordance with clause 5.2 and 5.2.1 of IS: 456 - 2000 in the items of BMC and RMC.

POINT WIRING M& L Wiring for one light point/fan point/exhaust fan point/ call bell point with 1.5 sq. mm. PVC insulated, copper conductor wiring cable (including 1.5 sq. mm. PVC insulated, copper conductor wiring cable for earthing from switch board to each point) in surface /recessed non-metalic UPVC conduit 2 mm. wall thickness (ISI Mark) with metal box and hylem sheet including circuit wiring from the existing distribution board to switchboard with 3 x 1.5 sq. mm. PVC insulated, copper conductor wiring cable (one wire for earthing) and complete as required.

M&L Wiring for one 6 pin socket outlet 5/15 independent in surface/recessed non-metallic UPVC conduit 2mm wall thickness ( ISI marked ) with metal box and hylemsheet including circuit wiring from the distribution Board to switch board with 2x4 Sqmm and 2.5. sqmm copper cable for earth and complete as required.

M& L Wiring for 32 Amp metal clad socket outlet with 32 Amp MCB with 6 sq.mm. PVC insulated copper conductor wiring/ cable wire in rigid non metallic PVC conduit 2mm wall thickness (ISI marked) including 2.5 sq mm copper wire for earthing for Air Conditioning including supply of metal clad socket & MCB.

S&F tube light grade 100mm dia Galvanized iron for passing electric or telephone cable with all fittings laid in trenches.

M & L PVC insulated, armoured heavy duty electric cable with aluminum conductor 1100 volts grade cross section area 95x4sqm core to be laid from NDPL pole to main panel as specified

M&L PVC insulated armoured heavy duty cable with aluminium conductor 1100 v grade cross sectional area 50x4sqmt

M&L Bell AC, 230v single pole complete all as specified

S &F 1100 volt grade heavy duty cable PVC insulated aluminum conductor, served with inner sheathing of PVC tape and over all PVC sheathed in service connection suspended by insulating hangers not more than IM apart including 4mm suspension wire one twin core cable 2x10 mmsq.

S & F non metalic PVC conduit exclusive of junction and terminal boxes but inclusive of all fittings such as tees, bends, elbows, reducers and all fixing accessories such as coupler, lock nuts, saddles pipe hooks etc.

for 25mm dia conduit pipe.

Supplying and fixing switch piano flush button, single pole one way 5 Amp.

Supplying and fixing switch piano flush button Single pole one way. 15 Amp.

Supplying and fixing socket outlet 6 pin, 5 / 15 Amp (combined) flush type.

Supplying and fixing , ceiling rose surface Bakelite, 65x50 mm two or three terminals (using for exhaust fan).

S/F of socket outlet for TV including laminated sheet box etc. complete

S/F of socket outlet for computer including laminated sheet and box etc complete all as specified and directed by Engineer-in-charge.

Supplying and fixing cast iron/ pressed steel terminal boxes for mounting switches sockets, fan regulators etc. with 3 mm thick plastic laminated sheet cover for the following sizes.

150 mm x 100 mm

200 mm x 100 mm

200 mm x 300 mm

250 mm x 300 mm

S/F bulk head, light fitting flame proof with built in control gear box made of aluminum alloy inclduing LED bulb and other accessories and internally prewired.

S&F of multi LED, high efficient light fittings of 150 watts with pressure die cast aluminum housing reflector enclosed with toughened glass with all accessories for fixing on 50 mm dia bracket with IP-66 protection complete accessories all as specified and directed by Engineer –in- Charge.

S/F light fitting single tube 1x20 watts, 230 volt and 1200 mm long spray power coated , bipin holder, complete with all accessories, prewired and including connnecting up with twin core twisted flexible copper conductor cable of suitable size.

S&F Bracket made out of G.I.pipe medium grade 50 mm dia, and 1 metre length bend at 120 “ suitable for mount LED light fitting of 120 watt and embeded in CC pillar using 1:2:4 type B-1 all as specified as directed by Engineer –in- Charge

Supplying and fixing 1200 mm sweep ceiling fan with step type electronic fan regulator .

Supplying and fixing 400 mm sweep exhaust fan with out regulator .

Supplying and fixing 400 mm sweep cabin fan (Wall Mounted).

Wiring with lan cable of copper conductor 1.0sqm size in the existing PVC conduct on surface or received as specified directed by Engineer-in-charge.

Wiring with TV cable RJ-6 of copper conductor in existing PVC conduit on surface or released including TV connecting plug as specified and directed by Engineer –in-Charge

M&L ,Providing earthing as per IS 3043 complete with galvanized steel earth plate electrode 60 x 60 cm x 6.3 mm thick buried directly in ground. (earth pit not less than 2.25 mt below normal ground level). With top edge of the plate not less than 1.5 mt below normal ground level, connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No.5, connected to earthing test point including earth pit with Cl COVER all as specified or indicated and testing on completion.

600 x 600 x 6.3 mm GI Plate Earth Station.

600 x 600 x 3.15 mm Copper Plate Earth Station.

S& F Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chase or burried in ground or drawn in conduit/pipe or fixed to holes or at any other indicated situations for loop earthing etc as required 25 × 4 mm galvanized iron strips

S&F of socket outlet, three pin 5 Amp on the same Board, with other switches in PVC conduit with PVC insulated cooper cable of size 1.5 sqmt.

S&F of socket outlet, threepin 5 Amps, independent with switch Board in PVC conduit and copper cable of size 1.5 sq

Providing & fixing self contained drinking water cooler with CFC refrigerator energy efficient compressor 150Ltrs storage capacity including connection to water main/pipe and electric connections complete, as specified, Voltas, Usha, Sidwal.

Lamp holder PVC/Poly carbonate by with cord grib suitable for batten fitting including LED bulb of make siska, Havel as specified and directed .

Supply , installation, testing and Commissioning of 08 passengers lift, speed 1.00 metre/sec, lift with single speed motor 415 volts, 3 phase, 50 Hz AC supply conforming to IS-14665, suitable to serve G+02 upper floors, with single automatic push button operation with/without attendant having suitable car/cage size as per manufacturer’s specification by provisioning of the following components complete all as directed. i) Provision of microprocessor based AC variable voltage and variable frequency (VVVF) controller suitable for above lift. ii) Provision of AC motor suitable for microprocessor based variable voltage and variable Frequency (VVVF) controller system. iii) Provision of switches, limit switches mounting in accessories, cams brackets and other accessories. iv)Provision of luminous digital hall buttons with stainless steel face plates at all landings. v) Provision of digital car position indicators with stainless steel face plate at all landing. vi) Provision of luminous car operating panel in the car with stainless steel face plate suitable for three stops and three openings with an in built provision of new ( press & speak) intercom. vii) Provision of digital car position indicator having stainless steel face plate. viii) Provision of travelling cables with copper conductors of suitable size including junction boxes and complete wiring with copper conductor cables with provision of troughs and other accessories complete. ix) Provision of top of car inspection box on car top. x) Provision of hoist way ropes and governor ropes. xi) Provision of inverter of adequate capacity to operate the car cabin fan, car lights , emergency light, an alarm bell and intercom with battery back up for minimum half an hour in the event of electric breakdown and with battery charging system complete all as specified and as directed by Engineering –in- charge. xii) Provision of main drive sheave suitable for above lift. xiii) Provision of any other components considered necessary/essential for smooth functioning of the lift as a whole. xiv) Provision of one set of intercom master unit in machine room along with battery back up and complete wiring. xv)Provision of safety guarding equipments such as 2 nos pit switches, controller guarding , fly wheel guarding , sheaved guarding and pit pulley guarding car top rolling pit ladder face plates etc. xvi) M&L for car enclosure made out of not less than18 SWG stainless steel with moon rock finishing and inside car floor covered by 2 mm thick steel chequered sheet and provided with one fan 300 mm sweep, LED tube light/LED lighting fitting 2x10 watts complete with tubes and cooper wound choke all other accessories and fixtures, mirrors 4 mm thick size 3’x4’, handrail, false ceiling emergency light & alarm. xvii) M&L for power operated car door panel made out of moon rock finishing stainless steel sheet not less than 18 SWG worth centre opening horizontal sliding and provision of new sill mounting accessories like header tracks rollers, hangers, inter locks and necessary hardware. xviii) Provision of complete VF door operated and aluminum safety shoes. xix) Provision of automatic rescue device all as specified and directed by Engineer-in- charge. xx) M&L for shaft lighting with bulk head LED light fitting at all landing with PVC insulated copper conductor cable of suitable size in and including rigid PVC conduit complete with pit switch. xxi) Provision of guide rails for car and counter weight with brackets, counter weight frame and filter frame. xxii) Provision of new governor and governor tension pully kit. xxiii) Provision of over load warning indicator ( visual and audio) so that lift does not start in case it is over loaded. xxiv) Provision of fire man switch for brining the lift directly to ground floor in case of fire. xxv) Electrical earthing as specified in these tender document. xxvi) All ancillary civil works required for entire completion of work as specified in these tender documents.

L G BUILDERS