Line Shifting work Naya savera

Amount

Part A (Materials Provided by contractor)

ST Pole 9 m long

ST Pole 11 m long

ACSR weasel Conductor

ACSR Dog Conductor

3x300 mm² ‘XLPE’ cable 33 KV

3x120 mm² ‘XLPE’ cable 11 KV

3x120+1x95+1x16 mm² LT AB Cable

33 KV ‘XLPE’ C/J Kit 3x300mm² Outdoor

33 KV ‘XLPE’ C/J Kit 3x300mm² St. Through

11 KV ‘XLPE’ C/J Kit 3x120mm² Outdoor

11 KV ‘XLPE’ C/J Kit 3x120mm² St. Through

Number Plate

Danger Board with Clamp

Barbed wire

Bolts, Nuts, & Washers

MS Earthing Rod 20x2500 mm

GI wire 5 mm

Al. Paint

Red oxide Paint

11 KV Polymer Pin Insulator

11 KV Top channel

11 KV Cross Bracing Angle

11 KV Top channel/Bracing angle clamp with nut bolt for ST Pole with nut bolt by 50x6 mm MS flat Iron make

Extra angle for cable support (suitable as 11 KV)

Clamp for extra angle support (suitable as 11 KV)

11 KV Polymer Disc Insulator

11 KV Polymer Disc fitting

Wire for jumper

11 KV Stay Rod 16x1800 mm

11 KV Stay clamp for ST Pole with Nut and Bolt by 50x6 mm MS Flat Iron make.

Stay wire 7/10 SWG

33 KV. Top channel (125x65mmX3200 mm (10.7 Kg/m)

33 KV Top channel clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

33 KV Stay Clamp for ST Pole with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay Rod 20x1800 mm

Stay wire 7/8 SWG

P.G. Clamp for DOG as per requirement

33 KV M.S. Angle Iron 65x65x6mm bracing

33 KV M.S. bracing Angle clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

Extra angle for cable support (suitable as 33 KV)

Clamp for extra angle support (suitable as 33 KV)

33 KV Stay Rod 20x1800 mm

33 KV Stay clamp for ST Pole with Nut and Bolt by 50x8 mm MS Flat Iron make.

Stay wire 7/8 SWG

33 KV Polymer Disc Insulator B& S type

33 KV Polymer Disc fitting for Dog conductor

33KV Al. binding wire

ST pole stud clamp with nut bolt for ST Pole with nut bolt by 50x8 mm MS flat Iron make

11 KV LT T-Off clamp

11 KV MS channel T-off 125x65x1300mm

LT cable 4x16 sqmm

Distribution box

Clamp for Distribution box

Clamp for T/F

Eye bolt for service cable

LT cable 1x16 sqmm

Al. Lug for Temporary line

Al. Lug for Permanent line

Stay complete with grouting for Temporary line (Stay clamp, wire And Stay rod)

PART - B- WORK

Erection of Double pole structure on 9 mtr ST Pole for 11 KV cable rising only including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 2028 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 9 mtr ST Pole for 33 KV cable rising only including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron 65 x 65 x 6 mm bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Double pole structure on 11 mtr ST Pole for 33 KV one side overhead and one side cable rising including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete) .

Erection of Single pole as stud pole structure on 11mtr ST. (SP-55) Pole including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40mm brick ballast), back filling of earth, proper ramming & fitting of all accessories (clamps with bolt and nut, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Erection of Double pole structure on 11 mtr ST Pole for Transformer installation including all works of evocation of pit, pole erection, making plinth for poles 30 cm above, grouting in the ratio 1:4:8 (cement, sand, 40 mm brick ballast), back filling of earth, proper ramming & fitting of all accessories for (M.S. angle iron bracing with clamps, top channel 125 x 65 x 3200 mm with clamps, danger board with clamp, Aluminium paint, red oxide paint, barbed wire earthing, etc. complete).

Laying, spreading, lifting and final sagging of 1 wire of ACSR weasel Conductor in accordance parallel with AB Cable as a neutral wire. fixing of Clamp as per requirement.

Laying, spreading and jumpring of ACSR Dog conductor and Cable rising.

Open Cable Duct slab & laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) in Cable trench (Cable trench already constructed by Jal Nigam with hanger) with proper Laying on cable hanger and filling sand if require.

Laying of 33 KV 3x300 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1.2M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site require.

Laying of 11 KV 3x120 mm² ‘XLPE’ cable(D/C) by digging pit & making trench in Proper size (1.2M depth x1M wide) below ground level by fixing bricks(4½˝) on both side of trench wall and 9˝ brick work at the centre of the trench along the cable. Fixing brick slab on top after filling sand around both the cable including cost of bricks and sand/HDD Method as per site require.

Road restoration charges during 33 KV cable laying under the road crossing

Road restoration charges during 11 KV cable laying under the road crossing

Open Cable Duct slab & laying of 11 KV 3x120 mm² ‘XLPE’ cable(D/C) in Cable trench (Cable trench already constructed by Jal Nigam with hanger) with proper Laying on cable hanger and filling sand if require.

Rising of 33 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Rising of 11 KV ‘XLPE’ cable in air after providing 6” dia. M.S pipe 3 m long Complete work.

Providing GI Pipe Earthing Complete for Cable jointing Kit with materials

Shifting, loading, Carriage and re-installation of Existing 10/16 kVA T/F From Existing place to Shifted Place.

Installation of distribution Box

Labour charges for Hanging of LT AB Cable on new erected pole with LT AB Cable clamp complete.

Cable jointing charges of 33 KV XLPE Cable Outdoor/ Straight Through

Cable jointing charges of 11 KV XLPE Cable Outdoor/Straight through.

Temporary line work

Erection of 9 M long ST pole for cable rising and fitting of cross arm and clamp with nut & bolt.

Lifting, spreading and cable hanging on new erected ST pole as temporary line

Grouting of stay complete

Dismentling of old and used temporary Line materials with complete fitting and Shifting, Loading Carriage & Unloading from Work site to store centre Gorakhpur at the end of final shifting.

Dismentling charges of existing Single Pole 8.5 mtr. PCC Pole.

Dismentling charges of existing Single Pole 11 mtr. ST Pole.

Dismentling charges of existing Double Pole 11mtr. ST Pole.

Dismentaling charges of old ACSR Dog conductor and rolling in pieces.

Dismentaling charges of old ACSR Weasel conductor and rolling in pieces.

Dismentaling charges of existing Al. cable scrap and rolling in pieces.

Shifting, Loading, Carriage & Unloading of old and damaged 33/11 KV/LT Line materials from work site to Store centre Gorkahpur Distt. Gorakhpur.

M/S SHUKLA ENTERPRISES

INDIA SUPPY CORPORATION