Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.7 LAccepted-AOC | L1 | Accepted-AOC AOC | |
| 2 | L2₹25.2 L+₹1.7 L (7.22%)Rejected-Finance CB 1 MAHAVEER NAGAR BARMER 344001 RAJ | BARMER | RAJASTHAN | 344001 | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹32.5 L+₹9.0 L (38.2%)Rejected-Finance V PO RAIKO KI DHANI NAWAJI KA PANA BHURTIYA DISTT BARMER RAJ PIN 344001 | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
25 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Utarlai
GE (AF) UTARLAI PB NO 11 BARMER 344001
CLEANING AND SEWAGE LINES AND MISC CERTAIN REPAIRS TO BLDG AT CHAUHTAN UNDER GE (AF) UTARLAI
2024_MES_648280_1
8466/E8
Open Tender
Civil Works
Item Rate
330 days
Utarlai
As per NIT
8 documents required · 8 mandatory
₹500
Yes
GE (AF) Utarlai
₹50,000
Yes
26 Jun 2024
28 Mar 2024
27 Apr 2024
29 Mar 2024
25 Apr 2024
11 Apr 2024
Amount
Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off all as specified and directed.
M&L for rendering 10 mm thick in CM 1:6 on stone masonry/concrete surfaces/ brick / PCC block surface, finished even and smooth without using extra cement.
M&L rendering 15 mm thick in two layer i.e. first layer 10mm thick in CM 1:6 and second layer 5mm thick in CM 1:4 on surface other than fair finish of brickwork/concrete/PCC block masonry wall or on stone masonry wall using water proofing compound @ 3% by wt of cement mixed with in second/finish coat and finished even and smooth without using extra cement ( Note : WPC will be measured & paid seperately)
M&L for rendering 10 mm thick in CM 1:3 on concrete surfaces in ceiling including finishing even and smooth without using extra cement.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion, white or tinted, over a coat of chalk whiting all as directed.
M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats of cement base paint, white or tinted, all as directed.
M&L for preparation of newly plastered or unplastered surfaces of ceilings and applying two coats of white wash.
M&L for preparation on new plaster surface of walls & applying two coat of white wash on walls complete all as specified and directed
Material & Labour for preparation of old plastered/unplastered surfaces by brooming down or steel wire brushing scrapping down smoke ,roof moulds moss and efflorescent salt and trading oil and greasing spots of ceiling and applying one coat of white wash on ceiling all as specified.
M&L for preparation of old surface of walls including pillars etc (plastered or unplastered) by scrapping down smoke spot moulds, moss and efflorescent salt and treating oil and greasy sports and applying one coat of white wash all as specified.
Material and Labour for preparation of old painted surfaces of wood & wood based materials over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as directed by the Engr-in-Charge.
M&L for preparation of old painted steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint.
M&L for washing, rubbing down and stopping of old distempered and painted surfaces of walls including removing of undesired nails and filling the holes, undulations etc with putty and applying one coat of oil bound distemper, white or tinted complete all as specified and directed.
All as per item No. 13 Above but applying two coat of oil bound distemper, white or tinted incl filling of holes, undulations with wapp putty complete all as specified and directed.
Material and Labour for complete removal of existing treatment on old plastered surfaces of walls and applying two coats of oil bound distemper over one coat of 1mm thick wall care putty complete all as specefied and directed by Engr-in charge .
M&L for applying one coat of cement base paint including preparation of old decorated or old plastered surfaces of wall / column / roof projection / chajja / facia complete all as specified.
M&L for preparation of newly wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint (of approved shade) over a coat of pink primer all as specified and directed.
S&F for preparation of new steel surface of any description over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed.
M&L for writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm high per 10 Nos (per CM Height) including painting of base with white and black colour complete all as specified and directed by Engr-in-Charge.
M&L Prep of old decorated surface of wall by using mechanical sand blaster and applying one coat of weather coat of Apex Ultima of asian paints or equivalent with the help of rollers complete sand all as specified and directed.
Taking down door,window,ventilator chowkats or frames with shutters (Without taking off shutters from the frame) for door window ventilators n.exc 1.5 sqm each.
Taking down chowkats or frames with shutters (Without taking off shutters from the frame) exc 1.5 but N.exc. 4 Sqm each.
Taking down shutters of any description exc 1 Sqm & nexc 2 Sqm each.
Taking down shutters of any description exc 1 sqm but not exc 2 Sqm each, resecuring, easing, repairing,adjusting and refixing in the same opening.
M&L for Repairing, resecuring, easing, adjusting shutters of any description exc 1 sqm but not exc 2 Sqm each without taking down inclduing necessary repairing old iron mongry, if required compete all as specified and directed.
S & F for pressed steel frames of size 125 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:4 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.
S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6 and 2 coats of oil bound distamper on new surface over primer etc complete all as specified and as directed.
S&F solid PVC door frame of size 50 x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification all as directed.
S&F Factory made solid panel PVC door shutter 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as directed.
S & F 2nd class HW 35mm thick factory made panelled shutters with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS-1003 (Pt-I) kiln seasoned and chemically pressure treated.
S&F 2nd class HW 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauge etc (w/o sash bars)
M & L factory made steel windows with side hung shutters including box type hinges with steel handle, steel peg stay, locking arrangement etc complete, one shutter with glazing bars for glass pens and other shutter without glazing bars for wiremesh, dovetailed or welded including pressed steel frame of size 80X40X1.25mm thick filled with PCC and complete all as specified and shown on drawings drg No CEAA/TD/120 R dated 06 June 2002 sheet no 1/4 to 4/4. Note:-(i) PCC for filling in chowkhats shall be measured and paid saperately. (ii) The cost of iron mongery and fittings as per shown on drgs shall be included in the quoted rate of this item. (iii) Gaurd bar/Grills shall be measured and paid saperately.
S & F for box steel ventilator (with bottom portion fixed with pin headed glass pane and top portion with two top hung shutter one with pin headed glass pane and other with wiremesh including pressed steel frame of size 80 X 40 X 1.25mm thick filled with PCC complete with mild steel stay etc) including all accessaries and making the surface good including painting etc all as specifiedd in Drg No. CEAA/TD/120 R dated 06 Jun 2002 Sheet No. 1/4 to 4/4.
S&F Mild Steel framed work such as grills, gratings etc with ends of bar shouldered and/or riveted or forged into spikes, framed guard bars etc confirming to Fe-290, Gde -E-165.
Hacking out old broken glass (any thickness, size quality of description) from metal/Aluminium frame including punching or drilling out old glazing pins./springs/rubber gasket/glazingclips complete all as specified and directed.
S&F sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden beads in square n.exc. 0.5 sqm in each pane.
ditto- all as per item No. 36 above but 4.8mm thick and area exc 0.5 Sqm each pane
S&F in repairs stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters.
S&F in stainless steel wire cloth, 0.36 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples or wooden/aluminium beads supplied with shutters.
Supply & Fix as in repair 150 mm long extruded aluminium alloy handles, fabricated type anodised complete all as specified and as directed
Supply & Fix as in repairs aluminium alloy anodised sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium complete all as specified and as directed
S&F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor over all length of cover plate 150mm.
S & F 100mm size stainless steel butt hinges medium weight cold rolled mild steel 100mm long.
S & F in repairs 100 mm Aluminium Butt hinges, extruded aluminium alloy, with galvanised mild steel hinge pin, anodised and fixed, type B-21all as spd and dircted.
S&F in repairs Aluminum tower bolt of extruded section of size 150mm.
S&F in repairs Aluminium, anodised, barrel tower bolt of extruded section and fixed, 200 mm size
S&F in repairs 300mm, ordinary rat tail rod pattern springs including including fixing to chowkhat with welding & roller and roller plate complete
Dismantling boarding, any description, fixed in any position with nails
Supply & Fix as in repair 18/19 mm thick prelaminated particle board interior grade, prelaminated both side face with decorative choice lamination one side and other side balancing white, fixed with screws or timber leaping on cutting exposded edges polishing complete as in built in shelves, cabinets , kitchen cupbords, modular kitchen drawer and almirah shutters or other placedcomplete as in built in shelves, cabinets partions etc . complete all as specified and directed.
S&F in repairs 40mm dia cupboard knobs fixed with nut,screw and washers of mild steel,bright finished.
S&F first class hard wood (teak) beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc. and removing old beads from site.
Supply & Fix in repairs hasp and staple of size 100 mm aluminium anodised wire type including bolt to hinges plate and fixed with screws complete all as specifed and directed
S&F in repairs magnetic wardrobe ball catcher suitable for shutters fixed with nut,screw and washers of mild steel,bright finished.
M&L for 20-25mm dia stainless steel curtain rod with brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories complete all as specified and directed by Engr-in-charge. Note : The cost of brackets and knobs is deemed to be including in the quoted rate. Nothing extra shall be paid on this account.
S&F Anodised aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing/sliding etc. complete all as specified ®
S&F Anodised aluminium rolling/sidehung door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges/rollers, anodised aluminum snap beading screws etc. complete all as specified.®
S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified
M&L Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge.
S&F in repairs Aluminium (Die cast) Body Door closer hydraulicallyregulated,designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as directed.
S& F in repairs Fibre insulation flame retardant type false ceiling tiles/boards 12mm thick size 600x600, ordinary type, fixed to GI frame work all as specified and directed.
M&L for false ceiling snapgrid fixed with and including galvanized iron powder coated inverted ‘Tee’ or ‘L’ section (concealed GI frame work) suspended from ceiling with provision of galvanized wire and wall taping screw including butterfly clips, hold down clips for fixing the board to frame complete all as per manufacturer’s instructions, complete, all as directed and specified. (a) Size of grid - 600 x 600 mm. (b) Size of main Tee – 24 x 32 x 0.35 mm. (c) Size of cross Tee – 24 x 30 x 0.35 mm. (d) Size of wall angle – 24 x 24 x 0.40
S&F in repairs stainless steel Kitchen plate rack of size 31”x36”x10” of Make-Nirali/ Blue Star/diamond/ jayna.
S&F in repair sink with drainage board made of stainless steel 1.00mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410mm x 330 mm x 160 mm, including brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and of suitable length, complete all as specified.
S&F in repairs bath PVC cabinet mirror of size 350x450 mm Make- Prayag / commander / Polytuf/ shakti
Supply and laying 15 mm bore tubes, galvanized steel, medium grade, with all fittings and fixed complete to walls and ceilings or laid in floors including taking down old steel tubing, connections with fittings all as specified and directed.
(- ditto - all as per item 65 above but 20mm bore
(- ditto - all as per item 65 above but 25mm bore
Cutting chases, pinning in, making good to facings in brick/stone masonry where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 20cm girth
Refixing old steel tubing, 15 mm bore, and connections in new or old position with necessary Tee/socket/Union/elbow including taking down old steel tubing, connections with fittings of same dia and cleaning for re-fixing (Walls, ceiling, floors, etc.)
(- ditto - all as per item 69 above but 20mm bore
(- ditto - all as per item 69 above but 25mm bore
S&F in repairs tubular towel rail, brass chromium plated, 20 mm dia 60 cm long between flanges and fixed complete all as specified and directed.
S&F in repairs, vitreous china wash down water closet pan (pedestal pattern), white, with and including plastic water closet seat, white colour, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.
S&F in repairs Vitreous china water closet (Sqating Pattern) "Orissa Pattern" size 580x440mm white with 'P' or 'S' trap front or back inlet and integral foots rest any pattern including connecting pipe of CI at suitable bore and length and incl fixing only old Cistern, flush pipe if required etc & set in PCC 1:5:10 type E-2 and making good to floor including removing rubbish etc out side of MOD land complete all as specified and directed.
S&F in repairs vitreous china wash basin, white, flat back, size 550x400mm including brackets, cutting for and pinning in ends of brackets or erecting stand, brass chromium plated perforated waste coupling/fittings 32 mm dia with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed and PVC waste pipe of 32mm bore and suitable length, complete all as specified.
S&F in repairs, 15 mm bore stop valve/ angle valve fancy type cast copper alloy chromium plated, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.
S&F in repairs 15 mm bore quarter turn two way angle cock/ bib cock capstan head, cast copper alloy, CP high pressure with crutch or butterfly handle, chromium plated, screwed both ends for iron pipes or for brass ferrule complete all as specified and directed.
S&F in repairs, 15 mm bore stop valve, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions.
S&F in repairs 15 mm bore bib taps, cast copper alloy chromium plated , fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.Make : Cera / Seiko / Parryware/ prayag
S&F in repairs 15mm dia CP wall mixer/ WHB mixer/Sink mixer, chromium plated for mixing hot and cold water,with capstan head, screwed down for iron pipe and fixed for brass ferrule complete all as specified and directed.
S&F in repair 15mm bore bib tap standared of PTMT any colour high pressure screwed for iron pipe and fixed, Minimum weight 90gms).Make:- Prayag /Polytuf / Shakti
S&F In repairs PVC connection 15 mm size with PTMT nuts of length 600 mm.
S&F 32 mm dia PVC flexible pipe fixed as waste pipe for WHB/ kitchen sink/ urinals inclding connecting to waste coupling with PVC couplers, elbow etc. complete all as spcified and directed.
S&F in repair 10 Ltr PVC valveless syphonic action type flushing cistern low level white with inlet including bracket and 32mm flush pipe of polythylene of low or high density in repairs. (including dismantlling of half turn valve 32 mm of any description , if required)
S&F in repairs CP coupling 32mm dia for sink with long screwed end and fly nuts flanged and bedded in red lead cement.
S&F in repairs chromium plated Jet spray with chromium plated finish including complete accessories complete all as specified and directed.
S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.
S&F in repairs chromium plated shower rose 125mm dia with CP arms, with or without swivel joints, including fixing to 15 mm steel pipe or union complete all as specified and directed.
Cleaning and removing all scale and dirt etc of storage water tanks of capacity exc 250 ltrs but n exc 500 ltrs including cleaning of mouths of circulating pipes by applying bleaching powder and brushing with wire brushes taking out all scales etc cleaning of tank with fresh water, flushing out disinfecting of tank with potassium permaganate 2% solution till stored in tank become clear including writing date of cleaning in DD-MM-YY Format in block letters all as specified and as directed
All as item No 90 above but tank of capacity exc 500 ltrs but n exc 1000 ltrs
S&F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. Make: Hindware/Parryware
S&F in repair choromium plated soap dish complete all as specified and directed.
S&F in repair choromium plated toilet paper holder complete all as specified and directed.
Dismantaling of water tanks capacity exc 250 ltr & n.exc 500 ltr and removing to store
-ditto as item no 95 but exc 500 Ltrs and n.exc. 1000 Ltrs capacity.
S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.
S&F 1000 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position , inlet / out let tank nipple , 20mm bore PVC float valve all as per specified and directed.
S & F in repairs 20mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for 15mm bore iron pipe and fixed. (Minimum weight 20mm - 2 1 0 gms ) Make : prayag/polytuf/Shakti
Supply and fix in repairs PVC water tank cover suitable for 500ltrs/1000ltrs capacity rotational moulded polyethylene water storage tanks.
Dismantling and breaking up drain pipes, (Cast iron or reinforced concrete) up to 100 mm (internal dia) set in cement mortar .
S&F cast iron soil, waste and vent pipes of 75 mm bore in any length with or without ers, with cement joints, laid in trenches or in floors or fixed to walls as specified & as directed.
S&F cast iron soil, waste and vent pipes of 100 mm bore in any length with or without ers, with cement joints, laid in trenches /floors fixed to walls complete all as specified and directed by Engineer-inCharge.
S&F in repair cast iron floor trap,nahani traps 75 mm outlet dia, with grating including jointing to waste pipe fixed in cement concrete type B -1, 1:2:4 complete all as specified.
All as per item 104 above but 100mm dia with grating of outlet complete all as specified and directed.
S&F in repair 75 mm bore cast iron bends with oval access door (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repair 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured).
S&F in repairs branch pieces single 'T' 75 mm bore equal or unequal with oval access door
S&F in repairs branch pieces single 'T' 100 mm bore equal or unequal with oval access door
S&F in repairs branch 100mm dia cast iron COWL
S&F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches,/wall complete all as specified and directed.
S & F in repair 110 mm bore PVC (SWR) bends any radius including laid in trenches and fixed with PVC adhessive complete
S & F in repair110 mm bore PVC (SWR) bends with oval access door any radius including laid in trenches and fixed with PVC adhessive complete
S & F in repair 110mm bore PVC (SWR) junction single, single T equal or unequal size including laid in trenches and fixed with PVC adhessive complete
S&F in repair grating dome 125 mm dia of stainless steel with or without hole complete all as specified.
M & L for Salt-glazed stoneware gully traps, square mouthed, tvpe 'P' of size 150mm x 150mm with 150mm dia outlet pipe including setted & jointing the pipe with CM 1:1 as iyn5 repairs complete all as specified and directed.
Demoliton of cement concrete(unreinforced) of any description & in any position not otherwise specifically provided for and removing debries outside of MOD land as directed.
M & L rendering 15 mm thick in CM 1:3 finished even & smooth without using extra cement mixed with water proofing compound @ 3% by weight of cement and including application of two coats of Dr fixit or equivalent SBR latex slurry solutionmixing with cement for water proof surface of sunken (as per manufacturer's instruction) Note :- WPC shall be measured & paid sepuretely.
M & L PCC 1:5:10 type D2 (using 40mm graded stone aggregate) all as specified and directed
Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises all as directed
M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.06 sqm but n. exc. 0.11 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.
M&L for non skid ceramic tiles, coloured, 7 to 8 mm thick in floors etc. (square/rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6.
M&L for glazed ceramic tiles, coloured, 300mmx 450mm x7 mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
Material & Labour for vitrified ceramic light shade coloured tiles 10 mm thick (Square/Rectangular) polished,area of each tiles n exc 0.36 Sqm in floors/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6) complete all as specified and as directed
M&L for glazed ceramic tiles, coloured, 200mmx 300mm x7 mm thick on vertical surfaces such as skirtings, dados and risers to steps etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 on stone masonry surfaces.
Demolition stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar
M&L for granite(of any type) work rubbed and polished in steps, jambs,pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite over and including 15 mm thick cement screed in CM 1:6.
M&L for rounding to the edges of granite stone slabs/ kitchen platform/Steps and window cills etc complete all as specified and directed.
M&L for machine cut Kota stone slab in flooring/shelves/window cill etc of 20 to 25mm thick over & including 20mm thick cement screed bed or bedding layer in CM (1:6) including cutting, polishing and mirror polishing complete of size 600mm x600mm)
M&L for machine cut Kota stone 15-20 mm thick as in skirting/ dado and pillar set over and incl 10mm thick rendering in cement mortor (1:4) and jointed with grey cement slurry mixed with pigments to match the shade including rubbing and polishing complete.
M&L for 75mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as sub base of floor.
M&L for 100mm thick cement concrete type B-2, 1:2:4 (using 40mm graded stone aggregate) as in floor finishes and paving.
M&L for Sand filling under floors or in foundations including watering and consolidation
M&L for rubber moulded vibratory compacted coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment incl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.
M&L for rubber moulded vibratory compacted coloured precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness, M-40 Grade with grey cement and pigment incl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.
M&L for rubber moulded coloured Chequered cement concrete tiles with grey cement and pigment 20cm x20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors, laid over and including 15mm thick screed bed in CM 1:6 complete all asincl dismantling of old unsericeable tiles and rubbish off the premises complete all as specified and directed.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete incl demolition and rubbish off old unserviceable kerb stone set in cement mortar and cement lime mortar complete all as specified and directed.
M&L two coat of synthetic enamel paint over a coat of primer on new concrete surfsce of any desc over 10cm width or girth,not otherwise described incl prep of surfaces complete all as specified and directed.
M&L one coat of synthetic enamel paint on old concrete surfsce of any desc over 10cm width or girth,not otherwise described incl prep of surfaces complete all as specified and directed.
M&L for 40mm thick PCC 1:2:4 type B-1 ( using 20mm graded agg) as in flooring complete all as specified and directed.
Providing and laying Cement concrete 1:2:4 type B0(using 12.5mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.
Demolition of Brickwork or stone/boulder masonry and precast block masonary for ashlar facings,dressed stonework, precast concrete articles and precast concrete block walling built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, complete all as directed.
M&L for Walling of random rubble,uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and directed.
M&L for precast cement concrete block masonry with solid blocks of PCC 1:3:6 type C1 using 20 mm graded stone aggregate, exc. 10 cm in width and setting in CM 1:6 complete.
M & L precast cement concrete block masonry type C1, 1:3:6 (using 20 mm graded stone aggregate) with solid block or slab 10 cm thick and setting in mortar 1:4 all as specified.
M&L 75 mm thick cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggt) as in plinth protection including forming groove 10 mm wide & 30 mm deep & filled with bitumenous filler complete all as specified.
Dismantling structural steel work in cluding doors, gates but excluding framed truss etc.
S&F framed work as in doors or gates of angle,mild steel plate or other section with gusset plates , rails , braces, etc complete of Gde Fe-410-W or Gde - E-250, drilling, welding etc for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding
S&F mild steel work conforming to Fe 310-0 or Fe 410-0 in hold fasts of flat iron ,hooks,pintle hinges,cleats hand made sliding bolts and smilar items complete all as specified.
M&L for applying two coats of synthetic enamel paint over over a coat of red oxide primer on newly surface of steel, description over 10 cm girth or width not otherwise described including preparation of surface complete
Taking down roof treatment any type any description on top of roof not exceeding 10cm thick including removal of rubbish out side MD and complete all as specified and directed
Demolition of cement concrete of any description and in any position not otherwise specificaqlly provided for.
M&L for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed
M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in roof padding benching kerbs of mud stops, rounded or chamfered on edges including form work complete all as specified and directed
M&L for providing and applying seamless thermal insulating electromeric high build liquid water proof cum heat resistance membrane for concrete roof surfaces. Make CICO Thermoseal XL or equivalent in / FOSROC/SIKA/STP limited as approved with dual effect by reflecting more than 80% of Sun rays thereby heating of roof surfaces reduces remarkably due to high amount of Titanium di oxide and transfer of heat from roof surface is blocked due to presence of ceramic micro sphere with the application on roof.It reduces energy cost approx 20%. Note:- Work shall be got executed through authorized applicator of manufacturer & as per standard procedure of application of manufacturer.
M&L for applying roof treatment on top of roof with APP modified membrane with non woven polyester reinforcement (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminous oil based primer ( IS : 3884) @ 250gm / Sqm weight not less than 3 kg/Sqm complete all as specified and directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 250 litres & n exc 500 litres complete all as specified and directed
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position capacity of tank exc 500 litres & n exc 1000 litres complete all as specified and directed
S&F in repair 20mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed
S&F in repair 25mm bore gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed
Dismantling posts or struts(wood, steel or RCC) any section embedded in concrete including taking out embedded portion of concrete and making good distrubed ground all as directed.
Excavation in post holes(or similar holes) in any type of soil each n exc 0.5 cum each getting out, and removing surplus soil to a distance nexc 50m and making good surface.
M&L Cement concrete (1:3:6) type C2 (using 40 mm graded aggregate as in foundation of post, filling and mass concrete.
Dismantling existing broken /rusted Fencing wire mesh of any size and position and removing from site.
S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290-0 E-165 all as directed.
Supply only chain link MS galvanised fancing any size all as specified and directed.
Fixing only chain link fencing including line wires of size 4mm dia GI wire any type of standards, rails straining bolts, etc including provision of binding wire.
Supply & fixing MS round bar 10mm dia and over for line wire to chain link fencing etc complete.
S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolt , including securing or lying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc as directed incl dismantling old broken/rusted barbed wire of any dia and remove from site.
S&F MS screw bolt (machine made) with hexonal or screwed head at one end and screwed the other end, and fitted with washer and one hexagonal or square nut n. exc 5cm long and 5 mm to 10mm dia bolt.
Dismantling wrought iron or mild steel work of any description not otherwise provided for all as directed.
S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as directed.
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof covering
M&L for Pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof coverin/cladding wall fixed with self tapping screwas as specified
Supplied only Liquid water proofing compound.
Demolition of Brick work or stone/boulder masonry,laid dry all as specified and directed.
M&L for cement concrete (1:4:8) type D2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete all as specified and directed.
M&L for Walling of random rubble,uncoursed, well bonded, laid dry in soak pits retaining walls, abutments and similar work all as specified and directed.
M&L for rendering 15 mm thick in CM (1:4) on stone masonry surfaces or surface other than fair face of brick-work/Block work or on one side of lathing finished even and smooth without using extra cement with using integral water proofing compound as per manufacturer instructions. Note: Integral Water Proofing compound shall be measured and paid for separately as “Supply only”.
Supply only integral water proofing compound ISI marked.
Excavating in trenches in any type of soil, n.exc. 1.5m wide and n.exc. 1.5 m in depth, for foundation, etc. or for shafts, wells, cess pits, manholes, pier holes, etc n.exc. 10 sqm on plan and n.exc 1.5m in depth and getting out.
Returning, filling in (soil), including spreading, leveling, watering and well ramming in layers not exc. 25cm.
Removing excavated material (soil) n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point.
Demolition and breaking up drain pipes, (Salt glazed stoneware, AC or reinforced concrete) upto & incl 150mm (internal dia) set in cement mortar.
M&L for cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in bed to drain pipes of size 150 mm bore, including packing under & haunching against the sides of pipes after they are laid and tested.
M&L for salt glazed stone ware pipe with collars of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed.
M&L for Reinforced concrete pipes, class NP2, with collars of 150 mm internal dia, grade `A’ ISI marked laid to slope in trenches, jointed in CM 1:1 and tested complete all as specified and as directed.
S&F in repair Salt-glazed stoneware gully traps, square or round mouthed, tvpe 150/100 mm,setting and jointing with solvent cement all as directed.
S&F in repair PVC (SWR) gully trap 125/110 mm,setting and jointing with solvent cement all as directed.
M&L for cutting into existing manholes for connecting new drains of 150mm internal dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel ( ½ round or 3/4 Section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required.
Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for
M&L for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in landings, cover slabs (for manholes/septic tank/soak well etc.) chullah hoods, chajjas, shelves and similar articles with plain faces, set in CM 1:4, including necessary form work moulds etc all as specified. (Reinforcement shall be measured and paid for separately).
M&L for mild steel TMT bars 10 mm dia and above, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
M&L for mild steel TMT bars 6 mm to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia.
M&L for cleaning pipe lines 150mm dia by rodding from Man holes and well flushing with water after cleaning all as specified & directed.
Clearing of blockage of Nahani Trap of bath room, kitchen by rodding blockage including taking down/refixing of grating etc complete all as specified and directed by Engineer-in-Charge.
Clearing of blockage of gully trap of bath room, kitchen by rodding blockage including taking down/refixing cover complete all as specified and directed by Engineer-in-Charge.
Clearing of blockage of Indian type WC/ Europion type WC by rodding/ pumping by hand including taking out door/refixing of over access covers etc complete all as specified and directed by Engr-in-Charge.
Cleaning of manholes of size n.exc 1.00 sqm plan area (internal) and n.exc 1.00 Sqm depth from GL including removal of manhole covers carefully, cleaning of sludge etc and refixing the manhole covers with cement mortar (1:4) (Sluge shall be removed outside MD land)
All as per item No. 199 above but depth exc 1.00m and n.exc 2.00m.
Pumping out sewage water/sludge from existing septic tank/soak well of any size & capacity and removal the sludge to out side MD land
M/S PRASHANT BENIWAL
M/s Malinath Electricals
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .