121

SCHEDULE OF RATE

Based of PWD SOR For Building work Excluding VAT/GST Issued on date 10.06.2026

S. No. I. No. PARTICULAR

QTY UNIT RATE RATE IN WORD

S.O.R No. CIVIL WORK

1 1.2 Surface dressing of the ground including removing vegetation and making up undulations and in-equalities not exceeding 15 cms in depth/ height including disposal of rubbish upto 1.5 m lift and lead upto 50m (at least 5m away from the dressed area). 302.39 sqm 6.00 Six Rupees Only

2 1.1 Excavation for all types and sizes of foundations, trenches and drains or for any other purpose including disposal of excavated stuff upto 1.5 m lift and lead upto 50m (at least 5m away from the excavated area), including dressing and leveling of pits.

1.1.1 In all types of soils.

433.42 cum 157.00 One Hundred and Fifty Seven Rupees Only

1.1.2 In ordinary rocks.

80.00 cum 227.00 Two Hundred And Twenty Seven Rupees Only

2a 1.6 Extra for every additional lift of 1.5 m or part thereof.

1.6.1 All types of soils 108.93 cum 23.00 Twenty Three Rupees Only

2b 1.6 Extra for every additional lift of 1.5 m or part thereof.

1.6.2 Ordinary or hard rocks 180.00 cum 40.00 Forty Rupees Only

3 1.18 Providing and filling in plinth with sand/ Crusher dust and hard moorum under floor in layers not exceeding 20cm in depth consolidating each deposited layer by ramming and watering, including dressing etc. complete.

515.21 cum 315.00 Three Hundred And Fifteen Rupees Only

4 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.3 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size).

11.95 cum 2525.00 Two Thousand Five Hundred And Twenty Five Rupees Only

5 1.17 Filling from available excavated stuff (Excluding rock) in trenches, plinth, sides of foundation etc. in each deposited layer by ramming and watering with

387.70 cum 55.00 Fifty Five Rupees Only

6 3.3 Providing and laying design mix reinforced cement concrete with crushed graded stone aggregate 20mm nominal size using batching plant, transit mixer and concrete pump, in all works upto plinth level excluding cost of form work.

3.3.2 M-25 grade

155.06 cum 3653.00 Three Thousand Six Hundred And Fifty Three Rupees Only

7 3.2 Providing and laying nominal mix reinforced cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.2.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20mm

8.40 cum 3539.00 Three Thousand Five Hundred And Thirty Nine Rupees Only

8 3.1 Providing and laying nominal mix plain cement concrete with crushed stone aggregate using concrete mixer in all works upto plinth level excluding cost of form work.

3.1.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size).

1.46 cum 3019.00 Three Thousand And Nineteen Rupees Only

9 3.4 Extra for laying PCC/RCC of any grade in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

GF M-25 grade + 1:1.5:3 73.28 cum 83.00 Eighty Three Rupees Only

terrace 5.54 cum 166.00 One Hundred And Sixty Six Rupees Only

10 2.1 Providing and fixing form work including centring, shuttering, strutting, staging, propping bracing etc. complete and including its removal at all levels, for:

A 2.1.1 Foundations, footings, bases of columns plinth beam, curtain wall in any shape and size and all type of wall below plinth level.

469.50 sqm 118.00 One Hundred And Eighteen Rupees Only

11 2.1.5 Columns, Pillars, Piers and likes- rectangular or square in shape

167.00 sqm 252.00 Two Hundred And Fifty Two Rupees Only

12 2.1.8 Beams, lintels, cantilevers & walls

121.80 sqm 172.00 One Hundred And Seventy Two Rupees Only

13 2.1.7 Suspended floors, roofs, access Kitchen Platform, balconies (plain surfaces) and shelves (cast in situ)

282.61 sqm 200.00 Two Hundred Rupees Only

14 2.1.13 Weather shade, chhajja, Cornices and mouldings

40.43 sqm 250.00 Two Hundred And Fifty Rupees Only

15 2.1.3 Window sills, anchor blocks, string course, bends, copings, bed plates and like.

34.33 cum 156.00 One Hundred And Fifty Six Rupees Only

16 3.12 Providing and placing in position reinforcement for R.C.C. work including straightening, cutting, bending, binding etc. complete as per drawings including cost of binding wire in foundation and plinth all complete:

3.12.2 Thermo-Mechanically treated bars FE 500D )

.@ 125 kg / cum 20345.68 kg 46.00 Forty Six Rupees Only

17 3.13 Providing and laying damp proof course (upto 50mm thick) with plain cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate 20mm nominal size) including form work.

1.97 cum 3601.00 Three Thousand Six Hundred And One Rupees Only

18 7.5 Brick work with modular fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in foundation and plinth in:

7.5.4 Cement Mortar 1:6 (1 cement : 6 coarse sand)

93.64 cum 2774.00 Two Thousand Seven Hundred And Seventy Four Rupees Only

19 7.6 Extra for brick work in superstructure above plinth level for every floor or part thereof in addition to rate for foundation and plinth:

GF 32.43 cum 103.00 One Hundred And Three Rupees Only

FF 15.44 cum 206.00 Two Hundred And Six Rupees Only

20 7.11 Half brick thick brick masonry with fly-ash lime bricks (FaLG Bricks) confirming to IS:12894-2002 of class designation 4.0 in superstructure above plinth level upto plinth level:

7.11.2 Cement Mortar 1:4 (1 cement : 4 coarse sand)

180.32 sqm 325.00 Three Hundred And Twenty Five Rupees Only

21 7.12 Extra for half brick work in superstructure above plinth level for every story or part thereof in addition to rate for upto plinth level:

Qty same as above 180.32 sqm 9.00 Nine Rupees Only

22 8.1 Providing wood work in frames of doors, windows, clerestory windows and other frames wrought framed and fixed in position.

0.18 cum 51893.00 Fifty One Thousand Eight Hundred And Ninety Three Rupees Only

23 8.3 Providing 40x5mm iron hold fast 40cm long including fixing to frame with 10mm bolts nuts and wooden plug and embedding in Cement Concrete 1:2:4 in blocks of size 30x10x15cm.

9.00 each 62.00 Sixty Two Rupees Only

24 8.4 Providing and fixing Dash fastener (for fixing door/ window frames) on C.C. / R.C.C./ Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.

8.4.3 Dash fastener 12x100mm

9.00 each 33.00 Thirty Three Rupees Only

25 8.137 Providing and fixing stainless steel sliding door bolts with 16mm rod, 2.5mm thick flap, necessary stainless steel nuts bolts and screws etc complete.

8.137.1 300mm 3.00 each 202.00 Two Hundred And Two Rupees Only

26 8.138 Providing and fixing stainless steel door latch with 12mm rod, 2.5mm thick flap, necessary stainless steel screws etc complete.

8.138.2 250mm 3.00 each 72.00 Seventy Two Rupees Only

27 8.139 Providing and fixing stainless steel tower bolts (Barrel type) with necessary stainless steel screws etc complete.

8.139.1 250 x10mm 3.00 each 82.00 Eighty Two Rupees Only

28 8.140 Providing and fixing stainless steel door handles having flap thickness 2.5mm, necessary stainless steel screws etc complete.

8.140.1 150 mm 6.00 each 21.00 Twenty One Rupees Only

29 8.143 Providing and fixing stainless steel hanging door stopper with necessary stainless steel screws complete.

8.143.2 Double 3.00 each 55.00 Fifty Five Rupees Only

30 8.132 Providing and fixing stainless steel butt hinges IS : 12817 marked with necessary stainless steel screws etc complete.

8.132.1 150x2.5mm (heavy)

12.00 each 83.00 Eighty Three Rupees Only

31 8.120 Providing and fixing aluminium sliding door bolts with 16mm rod, necessary nickel plated iron nuts bolts and screws etc complete.

8.120.2 250x16mm 5.00 each 120.00 One Hundred And Twenty Rupees Only

32 8.121 Providing and fixing aluminium door latch with 12mm rod, necessary nickel plated iron nuts bolts and screws etc complete.

8.121.2 250x12mm 5.00 each 44.00 Forty Four Rupees Only

33 8.123 Providing and fixing aluminium door handles 2.5mm thick with necessary nickel plated iron screws etc complete.

8.123.1 150 mm 10.00 each 26.00 Twenty Six Rupees Only

34 8.122 Providing and fixing aluminium tower bolts (Barrel type) with necessary nickel plated iron screws etc complete.

8.122.2 200 x10mm 5.00 each 49.00 Forty Nine Rupees Only

35 8.158 Providing and fixing IS: 3564 marked aluminium die cast body tubular type universal hydraulic door closer with necessary accessories and screws etc complete.

2.00 each 1233.00 One Thousand Two Hundred And Thirty Three Rupees Only

36 8.16 Providing and fixing PVC membrane foil coated (laminated) flush door shutters, made with core of block board with frame of first class hard wood, coated with 0.30mm membrane pasted with resin using vacuam treatment process complete all butexcluding hinges.

A 8.16.1 35 mm. thick (single leaf)

4.33 sqm 1685.00 One Thousand Six Hundred And Eighty Five Rupees Only

B 8.16.2 30 mm thick (single leaf)

4.10 sqm 1503.00 One Thousand Five Hundred And Three Rupees Only

37 8.15 Extra for double leaf shutter instead of single leaf.

4.33 sqm 44.00 Forty Four Rupees Only

38 8.18 Providing and fixing lipping with second class teak wood lipping on all edges of shutters.

8.18.3 35 x 6 mm size 8.36 rmt 46.00 Forty Six Rupees Only

8.18.2 30 x 6 mm size 29.00 rmt 41.00 Forty One Rupees Only

37 9.15 Providing and fixing M.S. grill of approved pattern made of M.S. flats or square or round bars welded to steel frame of windows etc. including applying a priming coat welded to frame with all necessary fitting complete including applying a priming of red oxide zinc chromate primer.

613.50 kg 62.00 Sixty Two Rupees Only

38 8.151 Providing and fixing factory made P.V.C. door frame of size 50x47mm with a wall thickness of 5mm, made out ofextruded 5mm rigid PVC foam sheet mitred at corners and joined with 2 Nos of 150mm long brackets of 15x15mm M.S. square tube, the vertical door profiles to be reinforced with 19x19mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100mm size complete as per manufacturers specification and direction of Engineer-in-Charge

24.75 rmt 294.00 Two Hundred And Ninety Four Rupees Only

39 8.152 8.152 Providing and fixing 30mm thick factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mm x 19mm for styles and 15x15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5mm thick heat moulded PVC 'C' channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 45degree angle on either side forming styles; and 5mm thick, 95mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide PVC sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel. 10mm (5mm x 2 ) thick, 20mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7mm (5mm+2mm) thick x 15mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per Manufacturer’s specification including 3 nos ISI marked stainless steel hinges of size 100x58x1.9 mm complete. (for W.C. and bathroom door shutter).

8.152.2 Both side Pre-laminated panel PVC door shutter

10.50 sqm 2407.00 Two Thousand Four Hundred And Seven Rupees Only

40 9.47 Providing and fixing aluminium work for doors, windows, ventilators and partitions made out of extruded aluminium standard sections (main section with minimum 1.5mm thickness) conforming to IS: 733, IS: 1285 mitred and jointed mechanically including aluminium cleats, neoprene weather stripping gasket beveled edge beading, screws duly fixed in wall/floor with fixing clips or hold fasteners or bolts and nuts as required aluminium sections shall be anodized transparent or dyed to approved shade according to IS: 1868, minimum anodic coating shall be of grade AC-15. (Glazing to be paid for separately:)

9.47.1 For fixed portion

181.89 kg 281.00 Two Hundred And Eighty One Rupees Only

9.47.2 For shutter of doors, windows & ventilators including providing and making provision for fixing of fitting wherever required including the cost of PVC/ neoprene gasket required (Fittings shall be paid for separately).

Qty same as above 135.00 kg 287.00 Two Hundred And Eighty Seven Rupees Only

41 9.51 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with PVC/ neoprene gasket etc. complete. (Cost of aluminium snap beading shall be paid in basic item):

9.51.2 With float glass panes of 5 mm thickness

27.00 sqm 602.00 Six Hundred And Two Rupees Only

42 9.34 Providing and fixing stainless wire gauge of average width of aperture 1.56mm with wire of 0.35mm to existing steel door, window shutter frames with necessary M.S. strip beading etc. complete.

12.60 sqm 672.00 Six Hundred And Seventy Two Rupees Only

43 11.41 Providing and fixing chicken mesh weighting not less than 250 gms/sqm as per IS : specification in the required width with 40mm long steel nails on vertical and horizontal surface near R.C.C. and brick walls junctions including scaffolding and all lead and lifts etc. complete before plastering upto 10mts in height.

208.99 sqm 73.00 Seventy Three Rupees Only

44 12.79 Providing and Laying DOUBLE/MULTI CHARGE( minimum 2.0 mm thick layer) VITRIFIED floor tiles with water absorption less than 0.05% and conforming to IS:15622-2017 of 1st quality of approved make in all colours and shade and size mentioned below (+/- 10mm) laid on 20mm thick cement mortar 1:4( 1 cement: 4 coarse sand) including grouting the joints with ehite cement and matching pigment etc. complete.

12.79.1 Size 600x600mm thickness 9 to 10 mm

251.65 sqm 920.00 Nine Hundred And Twenty Rupees Only

45 12.8 Providing and fixing plain cement concrete fibre reinforced heavy duty designer glazed floor tiles with uniform colour (for coloured tiles) and texture conforming to IS: 1237 (for abrasion wear) and IS : 516 (for compressive strength) of approved make, colours, shades and size on cement Mortar bed and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with matching pigment complete.

12.8.2 On floor, steps and risers over 20mm thick bed of cement Mortar 1:4 (1 cement : 4 coarse sand)

24.63 sqm 769.00 Seven Hundred And Sixty Nine Rupees Only

46 12.45 15 mm thick Table rubbed polished Granite stone slab flooring laid over 20mm (Average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing etc. complete. (Area of slab should be 0.50 sqm and above)

12.45.1 Granite stone grey/pink

51.05 sqm 1527.00 One Thousand Five Hundred And Twenty Seven Rupees Only

47 13.19 Extra for providing edge moulding to 15mm thick stone counters, vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

13.19.2 Granite work

199.68 rmt 146.00 One Hundred And Forty Six Rupees Only

48 12.74 Providing and Fixing rectified glazed ceramic Floor tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades over 20 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment complete

12.74.1 Size 300x300mm thickness 7 to 8 mm

10.48 sqm 662.00 Six Hundred And Sixty Two Rupees Only

49 12.75 Providing and Fixing rectified glazed ceramic Wall/dado tiles of 1st quality conforming to IS : 15622-2017 of approved make, in all colours, shades over 12 mm thick bed of cement mortar 1:3 ( 1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with matching pigment complete

12.75.1 Size 300 x 450 mm thickness 7 to 8 mm

54.74 sqm 604.00 Six Hundred And Four Rupees Only

50 11.1 Providing and making 6mm thick cement plaster of mix:

11.1.2 In Cement mortar 1:4 (1 cement : 4 fine sand)

329.68 sqm 74.00 Seventy Four Rupees Only

51 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

Total 12mm Plaster 388.03 sqm 82.00 Eighty Two Rupees Only

52 11.3 Providing and making 15mm thick cement plaster on the rough side of single or half brick wall of mix:

11.3.3 In Cement Mortar 1:5 (1 cement : 5 fine sand)

Total 15mm Plaster 702.03 sqm 96.00 Ninety Six Rupees Only

53 14.57 Providing and applying 2 mm thick white cement based Acrylic grade putty with minimum 3 coats applied @ 4.0 kg/ 10sqm as per relevant IS code 17545:2021 (product such As Asian trucare, Berger Happy Walls putty, Birla opus one pro smooth) to make the surface smooth and even with all tools tackles and labours etc complete for the work.(This item to be use in heigher grade painting works Item No. 14.65

888.03 sqm 81.00 Eighty One Rupees Only

54 14.60 Providing and applying of acrylic primer on all surface applied @ 0.80 litrs/10 sqm as per relevant IS Code 15489-1974 ( Product such as Asian spark/suprimo, J.K Primer, Dulux Acrylic Primer) with all tools tackles and labour etc. complete for the work.

888.03 sqm 31.00 Thirty One Rupees Only

55 14.65 Providing and applying Luxury Plastic emulsion paint with roller application minimum three coats applied @ 1.25 lit/ 10sqm up to final finish as per relevant Type-1 class D,C,B & A ( Glossy/semi Glossy and Matt, Egg shell or satin finish) of required shade (product such as Asian royale shyne, Dulux Velvet touch, Berger silk Luxury Emulsion, Nippon Impression Pearls, opus pure Elegance) inclusive of providing abro tape on edges and article and cleaning of dorr, window, floor and surface as required with all tools tackles and labour etc. complete for the work(with 4 years warranty)

Total 888.03 sqm 91.00 Ninety One Rupees Only

56 14.69 Providing and applying exterior surface with PREMIUM HEAVY DUTY glossy or Matt finish Exterior Emulsion paint of required shade to give protective and water proof finish minimum three coats applied @ 1.43 lit/10sqm up to final finish as per relevant I.S. code 15489:2013 Type-2 Class D,C,B & A ( Glossy/matt/Egg shell finish)having high DFT and Silicon aditive for elastomaric property (product such as Asian Ultima, Dulux weathershield Maxx, Berger Weathercoat All Guard, nerolac Excel Total, Nippon Durafresh expert, opus Tru Look) inclusive of providing abro tape on edges and article and cleaning of dorr, window, floor and surface as required with all tools tackles and labour etc. complete for the work(with 4 years warranty) 43071

511.79 sqm 94.00 Ninety Four Rupees Only

57 14.72 Providing and applying Glossy finish Enamel paints minimum 2 coats in all surface applying @ 0.75 lit/ 10 sqm upto required finish as per relevant I.S code 2932:2013 of ( Product such as Asian apcolite Prium Enamel, Dulux Promise Premium Enamel ,Nerolac Synthetic Enamel, opus Prime enamel)inclusive of providing abro tape on edges and article and cleaning of dorr, window, floor and surface as required with all tools tackles and labour etc. complete for the work

45.39 sqm 102.00 One Hundred And Two Rupees Only

58 4.13 Grading roof for water proofing treatment with: Cement concrete 1:2;4 (1 cement : 2 coarse sand :4 graded stone aggrigate 20mm nominal size)

8.99 cum 3244.00 Three Thousand Two Hundred And Forty Four Rupees Only

59 3.14 Providing and mixing water proofing material in PCC/ RCC work in the proportion recommended by the manufacturer.

….@ 10.0 kg / sqm 2246.78 kg 37.00 Thirty Seven Rupees Only

59 10.41 Providing gola 75x75 mm in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 10mm and down grade) including finishing with cement mortar 1:3 (1 cement : 3 fine sand) as per standard design.

99.33 mtr 58.00 Fifty Eight Rupees Only

60 11.32.4 Providing and making 18 mm thick plain cement mortar band in cementmortar 1:4 (1 cement : 4 fine sand) per cm width:,Drip course 10 cm wide

52.77 rmt 3.00 Three Rupees Only

61 11.5 Neat Cement punning.

70.93 sqm 28.00 Twenty Eight Rupees Only

62 9.11 Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2mm and braced with flat iron diagonals 20x5mm size with top and bottom rails of T-iron 40x40x6mm with 38mm steel pulleys complete with bolts, nuts, locking arrangement stoppers, handles including applying a priming coat of red oxide zinc chromate primer.

5.76 sqm 2831.00 Two Thousand Eight Hundred And Thirty One Rupees Only

63 11.40 Making groove in cement plaster while plastering upto10 mm deep and 10 mm wide.

front elevation

648.00 rmt 1.00 One Rupee Only

64 9.57.2 Providing stainless steel railing/ grill made of S.S. flats, hollow S.S. pipe or square/ rectangular sections of approved design fixing in stair case, balcony or other places with metal fasteners and stainless steel bolts etc complete. 9.57.2 SS Grade 304

75.92 kg 446.00 Four Hundred And Forty Six Rupees Only

65 9.61 Providing and fixing aluminium composite panels in approved panel sizes, thickness and shape on aluminium frame work on face of building. (Frame to be paid separately)

9.61.2 4mm thick

76.43 sqm 1483.00 One Thousand Four Hundred And Eighty Three Rupees Only

66 3.16 Making 50mm thick plinth protection of plain cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with sand including finishing the top smooth.

55.40 sqm 232.00 Two Hundred And Thirty Two Rupees Only

67 10.61 Providing and fixing at all height false ceiling consisting of frame work "W"/ "U" / "L" sections made of G.I. sheet with zinc coating of grade 120 consisting of angle cleats of size 25mm wide x 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to the ceiling with dash fastener 12.5mm diax40mm long with 6mm dia bolts to the angle hangers of 5x25x0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to G.I. channels 45x15x0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick button wedge of 80mm with tapered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of

2.64mm diax230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.55mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of tapered and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed including providing and fixing 12.5 mm thick tapered edge gypsum board conforming to IS: 2095- Part-I all complete as per drawing and specification and direction of the Engineer in Charge but excluding the cost of painting.

202.83 sqm 559.00 Five Hundred And Fifty Nine Rupees Only

PART B WATER SUPPLY AND SANITARY WORK WORK

1 19.42 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank 1000.00 ltr. 6.00 Six Rupees Only

2 19.7 Providing and fixing on wall surface G.I. pipes medium class complete with G.I. fittings and clamps, including cutting, making good the walls etc. and testing of joints complete

19.7.3 25 mm nominal outer dia pipes 40.00 rmt 219.00 Two Hundred And Nineteen Rupees Only

3 19.5 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. CONCEALED WORK including cutting chases and making good the walls etc.,

A 19.5.1 15 mm nominal outer dia .Pipes. 40.00 rmt 113.00 One Hundred And Thirteen Rupees Only

B 19.5.2 20 mm nominal outer dia .Pipes. 40.00 rmt 142.00 One Hundred And Forty Two Rupees Only

C 19.5.3 25 mm nominal outer dia .Pipes. 50.00 rmt 181.00 One Hundred And Eighty One Rupees Only

4 18.76 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete. a. 75mm dia Make: (Supreme/Finolex)

A 18.76.1 75mm dia pipe 25.00 rmt 155.00 One Hundred And Fifty Five Rupees Only

18.76.2 110mm dia pipe

180.00 rmt 227.00 Two Hundred And Twenty Seven Rupees Only

5 18.77 Providing and fixing on wall face or under floor UV stabilized Unplasticised Rigid PVC pipes (single socketed) having 3.2mm wall thickness conforming to IS : 13592 (4kg/sqcm) including required couplers, jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion etc complete.

18.77.1 Tee/ Tee with door/ Bend 45°/ Bend 90°

A 18.77.1.1 75mm 40.00 each 96.00 Ninety Six Rupees Only

B 18.77.1.2 110mm 65.00 each 131.00 One Hundred And Thirty One Rupees Only

18.77.2 Double "Y" with or without door

C 18.77.2.1 75mm 10.00 each 110.00 One Hundred And Ten Rupees Only

D 18.77.2.2 110mm 15.00 each 190.00 One Hundred And Ninety Rupees Only

18.77.3 Vent cowel

E 18.77.3.2 110mm 5.00 each 37.00 Thirty Seven Rupees Only

F 18.77.6 Nahani trap 110x75mm 12.00 each 77.00 Seventy Seven Rupees Only

6 18.78 Providing and fixing UV stabilized Unplasticised -PVC pipe clips of approved design to Rigid PVC pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.

18.78.1 75 mm 25.00 each 48.00 Forty Eight Rupees Only

18.78.2 110 mm 55.00 each 52.00 Fifty Two Rupees Only

7 18.4 Providing and fixing vitreous china water closet (European type W.C. pan) with white ISI marked plastic seat and lid, 10 litre low level white P.V.C. flushing cistern (same colour), conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :

18.4.1 White pedestal type 5.00 each 2450.00 Two Thousand Four Hundred And Fifty Rupees Only

8 18.17 Providing and fixing vitreous china wash basin with C.I. brackets, 32 mm C.P. brass waste of standard pattern, including painting of brackets, cutting and making good the walls wherever required :

18.17.3 White size 450x325 mm 5.00 each 1023.00 One Thousand And Twenty Three Rupees Only

9 18.25 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

18.25.1 32 mm dia 6.00 each 58.00 Fifty Eight Rupees Only

10 19.14 Providing and fixing 15 mm nominal bore C.P. brass fittings of approved make and conforming to IS:8931 including C.P. brass extension if required:

A 19.14.1 Bib cock (450gms) 5 each 325.00 Three Hundred And Twenty Five Rupees Only

B 19.14.3 Long body bib cock (500 grams) 2 each 362.00 Three Hundred And Sixty Two Rupees Only

C 19.14.7 Angle valve for basin mixer and geyser points (450gms) 15 each 325.00 Three Hundred And Twenty Five Rupees Only

D 19.14.4 Piller Cock (400 grams) 5 each 338.00 Three Hundred And Thirty Eight Rupees Only

E 19.14.5 Two way bib cock (800 grams) 5 each 602.00 Six Hundred And Two Rupees Only

F 19.14.14 Soap dish plate 5 each 139.00 One Hundred And Thirty Nine Rupees Only

G 19.14.19 Health foscet (hand jet) with flexible connection pipe (for WC) 5 each 658.00 Six Hundred And Fifty Eight Rupees Only

I 19.14.16 Towel rail (600mm long x 20mm dia) 5.00 each 287.00 Two Hundred And Eighty Seven Rupees Only

11 19.16 Providing and fixing brass/ gun metal gate valve with C.I. wheel of approved quality (screwed end):

19.16.1 25 mm nominal bore 7 each 371.00 Three Hundred And Seventy One Rupees Only

12 18.10 Providing and fixing 15 mm nominal bore uplasticised PVC connection pipe with PTMT nuts and PVC bush of approved quality and colour:

18.10.2 45 CM length 10 each 57.00 Fifty Seven Rupees Only

13 19.15 Providing and fixing stainless steel drain jali of approved make/quality. 12.00 each 43.00 Forty Three Rupees Only

14 20.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete 150mm thick as per standard design:

20.2.3 200 MM Diameter s/w pipe 85.00 rmt 432.00 Four Hundred And Thirty Two Rupees Only

15 20.3 Providing and fixing square-mouth S.W. gully trap grade 'A'’ complete with C.I. grating brick masonry chamber with well burnt modular clay bricks crushing strength not less than 35kg/ cm², water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design :

20.3.2 150 x 100 mm size P type. 4 each 1187.00 One Thousand One Hundred And Eighty Seven Rupees Only

16 19.47 Constructing masonry Chamber 30x30x50 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement Concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 ( 1 cement : 5 fine sand:10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick finished with a floating coat of neat cement complete as per standard design :

7 each 641.00 Six Hundred And Forty One Rupees Only

17 19.48 Constructing masonry Chamber 60x60x75 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

5 each 3947.00 Three Thousand Nine Hundred And Forty Seven Rupees Only

18 19.49 Constructing masonry Chamber 90x90x100 cm, inside with modular well burnt clay bricks of 35 kg/ cm² in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm. top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design :

3.00 each 9811.00 Nine Thousand Eight Hundred And Eleven Rupees Only

19 18.22 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink without drain board as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good the walls wherever required :

18.22.2 560x410 mm bowl depth 215 mm. 1.00 each 5279.00 Five Thousand Two Hundred And Seventy Nine Rupees Only

20 18.31 Providing and fixing 600x120x5mm glass shelf with edges rounded off supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

5.00 each 231.00 Two Hundred And Thirty One Rupees Only

21 18.29 Providing and fixing 600x450 mm beveled edge 4mm mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

5.00 each 509.00 Five Hundred And Nine Rupees Only

22 3.9 Extra for precast PCC/ RCC work of any mix including form work, hoisting and fixing in Cement Mortar. 1:2 (1 Cement : 2 coarse sand) and finishing with cement plaster in Cement Mortar 1:3 (1 Cement : 3 coarse sand) but excluding reinforcement.

Cover 0.07 Cum 399.00 Three Hundred And Ninety Nine Rupees Only

23 11.2 Providing and making 12mm thick cement plaster of mix:

11.2.1 In cement Mortar 1:3 (1 cement : 3 fine sand)

43.40 sqm 98.00 Ninety Eight Rupees Only

24 11.9 Extra for providing and mixing water proofing materials in cement plaster work in proportion as recommended by manufacturer. 43.40 Kg 37.00 Thirty Seven Rupees Only

25 20.31 Providing and constructing soak pit 1.20x1.20x1.20m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design. 1.00 each 1453.00 One Thousand Four Hundred And Fifty Three Rupees Only

26 20.2.2 Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand :10 graded stone aggregate 40 mm nominal size) all-round S.W. pipe including bed concrete 150mm thick as per standard design:150 mm diameter S.W. pipe 50.00 RM 371.00 Three Hundred And Seventy One Rupees Only

27 20.7.1 Constructing brick masonry manhole with well burnt modular clay brickscrushing strength not less than 35kg/cm2 in cement mortar 1:4 ( 1 cement : 4 coarse sand), R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation in cementconcrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement complete as per standard design :

Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (lightduty) 455x610 mm internal dimensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : each 2.00 NOS 5698.00 Five Thousand Six Hundred And Ninety Eight Rupees Only

28 21.1.1.3 Boring/drilling bore well perfectly vertical for the specified depth suitable toreceive required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer–in-charge upto 90 metre depth below ground level.150 mm dia 100.00 RM 288.00 Two Hundred And Eighty Eight Rupees Only

21.1.2.3 Rocky strata including Boulders. 85.00 RM 337.00 Three Hundred And Thirty Seven Rupees Only

29 21.4.3 Supplying, assembling, lowering and fixing in vertical position in bore wellunplasticized PVC medium well screen (RMS) slotted pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineerin- charge150 mm nominal size dia. 18.00 RM 464.00 Four Hundred And Sixty Four Rupees Only

30 21.14.1 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). [Agreemented Item No.-227, Page-39 of 45]

Stone boulders of size range 5 cm to 20 cm, in recharge pit. 0.89 cum 734 Seven Hundred And Thirty Four Rupees Only

31 21.14.2 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). [Agreemented Item No.-228, Page-39 of 45]

Gravels of size range 5 mm to 10 mm, over the existing layer of boulders

0.89 cum 685 Six Hundred And Eighty Five Rupees Only

32 21.14.3 Supplying, filling, spreading & leveling stone boulders/ Gravels/ Coarse sand, in recharge pit, in the required layers and thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (excavation of pit will be paid separately). [Agreemented Item No.-229, Page-40 of 45]

Coarse sand of size range 1.5 mm to 2 mm over existing layer of gravel

0.89 cum 400 Four Hundred Rupees Only

33 21.3 Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia,conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer –in-charge.

21.3.3 150 mm nominal size dia.

30 meter 459.00 Four Hundred And Fifty Nine Rupees Only

34 19.9 Providing and laying in trenches G.I. pipes medium class complete with G.I. fittings including excavation of trenches, refilling the same and testing of joints complete:

19.9.6 50 mm dia. nominal bore 50.00 meter 338.00 Three Hundred And Thirty Eight Rupees Only

Electrical SOR 2026

35 Supplying and fixing of following sizes 'B' class G I pipe with welded steel flange of suitable size at both the end of every pipe length, fixing with submersible pump and lowering with the pump in the bore well including necessary rubber gasket, nuts & bolts etc. as required.

23.4.5 40 mm dia. 80.00 Mtr 228.00 Two Hundred And Twenty Eight Rupees Only

Electrical SOR 2026

36 23.7 Supplying and fixing of following sizes GM gate valve ISI mark in the suction/ delivery line etc. as required.

a 23.7.6 32 mm dia. 1 Each 447.00 Four Hundred And Forty Seven Rupees Only

b 23.7.7 25 mm dia. 2 Each 387.00 Three Hundred And Eighty Seven Rupees Only

Electrical SOR 2026

37 12.1 Earthing with G.I. earth pipe 4.5 mtr long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe, etc. (but without charcoal or coke and salt) as required. 1.00 Set 2757.00 Two Thousand Seven Hundred And Fifty Seven Rupees Only

Electrical SOR 2026

38 23.3 Supplying, installation, testing and commissioning of submersible pump set for water supply system with submersible motor directly coupled to multi-stage submersible pump of specified discharge capacity, head, delivery size in existing bore well including 2 sets of suitable size holding clamps made out of 50 mm X 6 mm MS flat, connection with suitable submersible cable of standard length etc. as required.

23.3.2 1.5 HP, single phase 2.00 Each 14951.00 Fourteen Thousand Nine Hundred And Fifty One Rupees Only

Electrical SOR 2026

39 23.11 Supply, installation, testing and commissioning of 1-3 HP 1 phase submersible motor starter cum control wall/ floor mounted type made out of not less than 1.6 mm thick MS sheet and comprising of following panel mounting switchgears there in including connection inter-connection etc. as required. a) Phase indicating lamps with fuses and toggle switches 1 set b) 1/2/3 HP 1 phase DOL starter with over load and no volt relay 1 No c) 25 A "C" curve DPMCB 1 No d) Voltmeter 0-250 V 1 set e) Ammeter 0-10 A 1 set 2.00 Each 3426 Three Thousand Four Hundred And Twenty Six Rupees Only

Electrical SOR 2026

40 23.14 Supplying, laying and fixing following size submersible cable along with GI/PVC/HDFC pipe line or laid in ground etc as required

23.14.2 3x2.5 sqmm 203.00 Mtr 54.00 Fifty Four Rupees Only

Electrical SOR 2026

41 23.15 Supplying and making water proof joint with heat shrinkable joint kit including copper ferrules for following size of 3 core submersible copper conductor cable of 1.1 KV grade as required.

23.15.2 3x2.5 sqmm 3.00 Each 222.00 Two Hundred And Twenty Two Rupees Only

42 21.17 Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well within the selected habitation, including photography, interpretation of resistivity data and submission of report in the desired format along with resistivity readings, necessary graph and photographs. (only successful point is payable) 1.00 point 1277.00 One Thousand Two Hundred and Seventy Seven Rupees Only

SCHEDULE OF INTERNAL ELECTRIFICATION, AC, CCTV & UPS WORK FOR REGISTRY OFFICE AT BHATAPARA (C.G.)

S/NO. SOR ITEM CODE PARTICULARS OF ITEMS UNIT RATE AMOUNT (WORDS)

1 1.7 Wiring for light/ fan/ exhaust fan / call bell point with 3x1.5 sqmm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) with 5/6 amp modular switch, modular base and cover plate, suitable size G.I. box as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.7.1 Short Point Point 235.00 Rs. Two Hundred Thirty Five Only

1.7.2 Medium Point Point 374.00 Rs. Three Hundred Seventy Four Only

1.7.3 Long Point Point 518.00 Rs. Five Hundred Eighty Only

2 1.9 Extra for providing and fixing light plug point on board in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) point wiring with modular type 3 pin 5/6 amp socket outlet and 5/6 amp switch including cost of base and cover plate and G. I. box etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Point 191.00 Rs. One Hundred Ninety One Only

3 1.10 Wiring for light plug point with 3x2.5 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) along with modular type 6 Amp switch and 3 pin 6 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5)

1.10.1 Short Point Point 390.00 Rs. Three Hundred Ninety Only

1.10.2 Medium Point Point 582.00 Rs. Five Hundred Eighty two Only

1.10.3 Long Point Point 814.00 Rs. Eight Hundred fourteen Only

4 1.11 Wiring for power plug point with 3x4 sq mm FRLS PVC insulated stranded copper conductor wire for phase, neutral and earth in concealed FRLS PVC conduit,along with modular type 16 Amp switch and 6 pin 16 amps socket outlet with modular base and cover plate, suitable size G.I. box, earthing the switch box and socket outlet with same size wire etc. as per specification.Sarswati/Polycab/Precision make conduit pipe, RR Kabel/Havells/Polycab/ KEI make wire,Legrand (Mylinc)/Havells (Verona) /Kolors (Kosmik) make Switch & Socket.

1.11.3 Long Point Point 1191.00 Rs. One Thousand One Hundred Ninety One Only

1.11.4 Extra Long Point-1 Point 1594.00 Rs. One Thousand Five Hundred Ninety Four Only

1.11.5 Extra Long Point 2 Point 2042.00 Rs. Two Thousand Forty Two Only

1.11.6 Extra Long Point-3 Point 2492.00 Rs. Two Thousand Four Hundred Ninety Two Only

5 1.13 Wiring for circuit/ sub main wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, wire in concealed FRLS PVC conduit (heavy duty, thickness of pipe should be 2 mm) as per specification and IS: 694 (2010), IS: 9537 (2000 Part 5) Sarswatl/Polycab/Proclslon make condult plpo, RR Kabel/Havells/Polycab /KEI make wlre.

1.13.2 3 X 2.5 sq. mm in 20mm conduit Meter 98.00 Rs. Ninety Eight Only

1.13.3 6 X 2.5 sq. mm in 25mm conduit Meter 151.00 Rs. One Hundred Fifty One Only

1.13.6 3 X 4.0 sq mm in 25mm conduit Meter 128.00 Rs. One Hundred Twenty Eight Only

1.13.14 6 X 10 sq. mm in 40mm conduit Meter 494.00 Rs. Four Hundred Ninety Four Only

6 1.15 Supplying and fixing of following sizes FRLS PVC conduit along with accessories in concealed complete as per specification. Make:Sarswati /Polycab/Precision

1.15.1 20 mm Meter 42.00 Rs. Forty Two Only

1.15.2 25mm Meter 46.00 Rs. Forty Six Only

7 3.11 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, multi strand wire in the existing surface/concealed, FRLS PVC conduit/PVC casing caping as per specification and IS: 694 (2010) Sarswatl/Polycab/Preclsion make conduit pipe, RR Kabel/Havells/Polycab/KEI make wire.

3.11.1 1 x 2.5 sq. mm Meter 19.00 Rs. Nineteen Only

8 3.13 Supplying and drawing following grade co-axial TV wire FRLS PVC insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ concealed Steel/PVC conduit as per specification Make:RR Kabel/Havells/Polycab/KEI

3.13.1 RG-6 grade Meter 12.00 Rs. Twelve Only

9 3.14 Supplying and drawing UTP 4 pair Cat 6 LAN wire in existing surface/ concealed Steel/FRLS PVC conduit as per specification. Make:RR Kabel/Havells/Polycab/KEI Meter 16.00 Rs. Sixteen Only

10 4.3 Supplying and fixing of following sizes PVC switch box suitable for modular switches with modular base and cover plates on surface complete as per specification

4.3.1 94 mm X 94 mm (1/2 Module) Each 101.00 Rs. One Hundred One Only

11 5.4 Supplying and fixing following modular switch, socket, other accessories on the existing modular plate & switch box including connections but excluding modular plate etc. as per specification. Make:Legrand (Mylinc)/Havells(Verona)/Kolors (Kosmik)

5.4.9 Fan regulator (two module size) electronic stepped type moving all rounds Each 196.00 Rs. One Hundred Ninety Six Only

5.4.11 Plug Top (Deluxe type) 3 pin 16 Amps (For power plug.) Each 75.00 Rs. Seventy Five Only

5.4.15 Telephone socket outlet Each 62.00 Rs. Sixty Two Only

5.4.16 T.V. antenna socket outlet Each 65.00 Rs. Sixty Five Only

5.4.17 Computer Outlet Jack Each 214.00 Rs. Two Hundred Fourteen Only

5.4.18 25/32 amp A.C. Starter switch Each 217.00 Rs. Two Hundred Seventeen Only

12 5.6 Providing and fixing composite unit for computer points having modular type 1 No 6 pin 16 amp socket outlet, 1 No 16 amp switch, 3 Nos 3 pin 6 amp socket outlets, 3 Nos 6 amp switches, suitable G.I. box, base and cover plates, earthing the sockets and switch box including etc. as per specification. Make:Legrand (Mylinc)/Havells(Verona)Kolors (Kosmik) Each 720.00 Rs. Seven Hundred Twenty Only

13 5.7 Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts A.C. supply, complete as per specification. Make: Anchor/Cona/Vinay

5.7.2 Deluxe Each 95.00 Rs. Ninety Five Only

14 5.9 Providing and fixing round/ hexagonal fan box (125mm dia) depth 75mm (max.) with 12mm dia steel bar hook, 1.6mm thick MS sheet cover, in RCC slab etc. as per specification. Each 37.00 Rs. Thirty Seven Only

15 6.4 Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation B, 3 nos. blades, 30 cm long down rod, 2 nos canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise 75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, including connection, earthing etc. complete as per specification. Make: Bajaj/Havells/Usha Each 2349.00 Each Rs. Two Thousand Three Hundred Forty Nine Only

16 6.5 Supplying and fixing of wall/ cabin fan including connection etc. as per specification. P.F. should be greater than 0.9 Make: Bajaj/Havells/Usha

6.5.2 400 mm sweep Each 1803.00 Each Rs. One Thousand Eight Hundred Three Only

17 6.6 Supplying, installation, testing and commissioning of following sizes heavy duty (continuous running) 1400 rpm exhaust fan in existing opening in wall including earthing etc complete as per specification. P.F. should be greater than 0.9 Make: Bajaj/Havells/Usha Each

6.6.1 300 mm sweep Each 2158.00 Rs. Two Thousand One Hundred Fifty Eight Only

18 6.12 Providing and fixing phenolic laminated sheet cover of 180 mm dia 3 mm thick on the fan box etc. as per specification. (If provided at the time of installation of ceiling fan) Each 49.00 Rs. Forty Nine Only

19 6.16 Supplying, installation, testing and commissioning of following sleek LED panel down lighters (luminaries) in round/ square shape complete with electronic driver heat sink capacitor and all other accessories on surface/ in false ceiling etc. as per specification and furnishing 5 Yrs Warranty certificate from manufacturer. P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens/watt. Make: Philips/havells/Jaquar

6.16.2 36 watt, size 600 x 600mm Each 2066.00 Rs. Two Thousand Sixty Six Only

20 6.19 Supplying, installation, testing and commissioning of following LED tube light fitting including batten with Electronic Driver Heat sink Capacitor complete with all other accessories on surface/ in false ceiling, including connection, earthing etc complete as per specification and IP20, P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 100 lumens/watt. Make: Philips/havells/Jaquar

6.19.3 18/20 watt (4 feet) Each 390.00 Rs. Three Hundred Ninety Only

21 6.28 Supplying, installation, testing and commissioning of following 230/250 volts LED street light fitting with all accessories like driver, heat sink made of die cast aluminium with IP 66 protection and 15 KV surge protection on pole bracket, including connection, earthing, Separate housing for driver etc complete as per specification and P.F. should be greater than 0.9. LED chip efficacy ratio ≥ 120 lumens/watt Make: Philips/havells/Jaquar

6.28.3 25 watt Each 1357.00 Rs. One Thousand Three Hundred Fifty Seven Only

22 7.17 Providing and making interconnection in cubical panel between BBC and switchgears with following size FRLS PVC insulated copper conductor wire lead of length upto 50cm including providing copper thimbles on both ends as per specification (To be measured separately for each phase/ neutral). Make: RR cable/havells/polycab/KEl

7.17.1 10 sqmm (32 amp) Each 67.00 Rs. Sixty Seven Only

23 7.19 Fabrication, supply, installation, testing and commissioning of cubicle type compartmentalized wall/ floor mounted power cum control panel board of specified size and following depth made out of not less than 2 mm thick CRCA MS powder coated sheet with suitable size compartments for bus bars, switchgears and necessary cutouts for voltmeters, ammeters etc as per specifications including powder coating painting but without busbars, switchgears and other accessories etc complete as per specification.

7.19.1 Upto 300 mm deep sqm 6014.00 Rs. Six Thousand Fourteen Only

24 7.21 Supply, installation, testing and commissioning of 4 pole (3 phase + neutral) copper (electric grade) bus bars in existing cubicle type compartmentalized wall/ floor mounted panel board along with suitable size and shape insulators, necessary bolts and nuts etc complete as per specification.

7.21.1 100 amp (20x3mm) Metre 1163.00 Rs. One Thousand One Hundred Sixty Three Only

25 9.1 Providing and fixing following rating and breaking capacity MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as per specification, IS/ IEC: 60947-2 and Ics 100% Icu. Make: Havells/Legrand/ABB/HPL

9.1.24 4 pole MCCB, 100A, Adjustable Thermal Magnetic Release, 35KA Each 5626.00 Rs. Five Thousand Six Hundred Twenty Six Only

26 9.2 Supplying and fixing on surface/ recess following way, 240 volts SP&N MCB distribution board of sheet steel phosphatized and powder painted complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator) Make: Havells/Legrand/ABB/HPL

9.2.7 12 way, Double door Each 971.00 Rs. Nine Hundred Seventy One Only

27 9.4 Supplying and fixing on surface/ recess horizontal type following way, 415 volts, TPN MCB distribution board of sheet steel phosphatized and powder painted, complete with tinned copper busbar, neutral busbar, earth bar, din bar, detachable gland plate, including interconnections, earthing etc. as per specification. (But without MCB/RCCB/Isolator)

9.4.5 6 way Double door Each 1798.00 Rs. One Thousand Seven Hundred Ninety Eight Only

28 9.11 Supplying and fixing SP MCB, 240 volts, 'C' curve,suitablefor inductive load in the existing MCB DB complete with connections, testing and commissioning etc.as per specification.Make: Havells/Legrand/ABB/HPL

9.11.2 6 amps to 32 amps Each 130.00 Rs. One Hundred Thirty Only

29 9.12 Supplying and fixing DP MCB, 240 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification. Make: Havells/Legrand/ABB/HPL

9.12.3 40 amps Each 569.00 Rs. Five Hundred Sixty Nine Only

30 9.16 Supplying and fixing TP&N MCB, 440 volts, 'C' curve, suitable for lighting and other loads in the existing MCB DB complete with connections, testing and commissioning etc. as per specification.

9.16.5 63 amps Each 1161.00 Rs. One Thousand One Hundred Sixty One Only

31 10.17 Providing and fixing penal mounting 230 volt LED type indicating lamp in existing cubical panel including, connections, testing and commissioning etc. as per specification. Each 83.00 Rs. Eighty Three Only

32 11.2 Supplying, installation, testing and commissioning following rating single phase in single phase out ON-LINE UPS including connection etc but without batteries as per specification. Make: Microtek/Luminious/Exide

11.2.3 5 KVA with DC bus voltage 180 V Each 41214.00 Rs. Forty One Thousand Two Hundred Fourteen Only

33 11.4 Supplying, installation, testing and commissioning following rating (Sealed Maintenance Free) lead acid battery including connection as per specification. Make: Microtek/Luminious/Exide

11.4.3 100 AH Each 8839.00 Rs. Eight Thousand Eight Hundred Thirty Nine Only

34 20.6 Supplying and erection of angle/channel iron cross arms/ bracket/ other fitting of approved size and shape including drilling of holes for insulator pins, bolts and nuts etc as per specification. kg 68.00 Rs. Sixty Eight Only

35 12.16 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as per specification. Metre 101.00 Rs. One Hundred One Only

36 12.19 Providing maintenance free earthing with following size GI pipe including making bore pit of minimum 150mm dia, providing and laying approved make Earthing Electrode of Pipe-in-Pipe technology as per IS 3043(R 2016) -1987 made of corrosion free G.I. Pipes having outer pipe of 80mm dia and inner pipe of 50mm dia and filling with specified qty highly conductive compound around pipe and above that with soft soil in bore pit complete and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. as per specification:

12.19.2 With 2 metre long GI Pipes and 25 kg back filling compound. Each 7253.00 Rs. Seven Thousand Two Hundred Fifty Three Only

37 15.3 Supplying and laying following sizes one number FRLS PVC insulated /XLPE, PVC sheathed, steel armoured, aluminium conductor power cable of 1.1 KV grade in existing RCC/ HUME/ STONEWARE/ METAL HDPE pipe as per specification, IS: 1554 (1988, Part 1) & IS: 7098 (1988, Part 1)

15.3.12 3.5 x 35 sq. mm. Metre 118.00 Rs. One Hundred Eighteen Only

38 15.23 Supplying and making end termination with brass compression gland and aluminum lugs for following size armoured aluminum conductor power cable of 1.1 KV grade as per specification.

15.23.13 3.5 X 35 sq. mm (28 mm) Each 135.00 Each Rs. One Hundred Thirty Five Only

39 18.9 Supplying and fixing of GI Trunking/Raceways with 120 GSM coating and made up of 1.6 mm thick steel sheet. The steel sheet is Pre Galvanized with zinc coating and is double folded and arc welded in joints to prevent concrete seepage. The trunking is compartmentalized for provision of data, power and voice cables and has a depth of 25/38mm complete as per specification. Raw materials complies to Indian Standards IS 277:2003

18.9.11 150 mm x 38 mm x 1.6 mm (2 compartments) Metre 647.00 Rs. Six Hundred Forty Seven Only

40 18.12 Supplying and fixing of GI Junction boxes, suitable for 25/38 mm depth GI raceways. The junction boxes are made out of high pressure die cast zinc alloy complete with all accessories such as trap lid, strong support frame, bore support studs etc. complete as per specification. Trap lid is reinforced and can withstand upto 2 tons of distributed load on the top. As per IEC 61084 Standards

18.12.2 250 mm x 250 mm x 60 mm / 75 mm (1 compartment) Nos. 997.00 Rs. Nine Hundred Ninety Seven Only

41 24.3 Supplying of approved make split type Air Conditioner unit with cooling unit (copper coil) and condensing unit (copper coil) including 5 years compressor warranty and standard length of upto 3 metre of copper piping with insulation, etc complete as per specification: Make Mitsubish/O-General

24.3.3 2.0 ton split type capacity 6000 kcal/hr (3 star). Each 42353.00 Rs. Forty Two Thousand Three Hundred Fifty Three Only

24.3.6 2.0 ton Cassettee split type capacity 6000 kcal/hr. Each 73659.00 Rs. Seventy Three Thousand Six Hundred Fifty Nine Only

42 24.4 Installation of split type Inverter/Non Inverter Air Conditioner unit, cooling unit on wall inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification (Extra length of copper piping and power cable shall be paid extra on linear basis) Each 1861.00 Rs. One Thousand Eight Hundred Sixty One Only

43 24.5 Installation of cassettee type Air Conditioner unit, cooling unit inside and condensing unit on out side wall/ ceiling/ floor at desired locations with existing standard length of copper piping with insulation and power cable including providing and fixing necessary good quality powder coated MS frame etc complete as per specification. (Extra length of copper piping and power cable shall be paid extra on linear basis) Each 3889.00 Rs. Three Thousand Eight Hundred Eighty Nine Only

44 24.7 Supply and fixing of approved make wall mounting type voltage stabilizer with input volts 160-250, output volts 200-240 volts and double step relay on desired location with necessary fixing material including connection etc complete as per specification. Make V-guard/Microtek/voltas

24.7.2 5 KVA Each 3853.00 Rs. Three Thousand Eight Hundred Fifty Three Only

45 24.1 Supply, connecting and fixing extra length of copper piping for split type air conditioners of following dia and approved quality with insulation sleave etc complete as per specification

24.10.1 5/8" Meter 331.00 Rs. Three Hundred Thirty One Only

24.10.3 1/4" Meter 165.00 Rs. One Hundred Sixty Five Only

46 24.12 Supplying, connecting and fixing 15mm dia PVC flexible drain pipe (reinforced with nylon threads) in drain outlet of split type air conditioners etc complete as per specification Meter 13.00 Rs. Thirteen Only

47 27.11 Supplying, installation, testing and commissioning of 4 MP Bullet Camera weather & dust proof IP based Fixed Lens day/night Camera (IP67, IK 10), 1/3" 4MP PS CMOS Image Sensor, H.265 and H.264 triple-stream encoding, WDR(120dB), Day/Night Support, UL, CE, FCC Certified as per the specifications. Make Honeywell/Bosch/Pelco Each 5604.00 Rs. Five Thousand Six Hundred Four Only

48 27.18 Supplying, installation, testing and commissioning of 8 Channel NVR 2 Sata port Up to 16 channel IP camera input Max 200Mbps incoming bandwidth Smart H.265+/H.265/Smart H.264+/H.264 dual codec decoding Up to 8MP resolution preview and playback Support 2 SATA HDDs up to 6 TB each, 2 USB(1 USB3.0, 1 USB2.0) 1 HDMI/1 VGA simultaneous video output ONVIF Version 2.4 conformance Alarm In/out 4/2, Two way talk 1 Channel Input, 1 Channel Output RCA, 1 RJ-45 port (10/100/1000Mbps) as per the specifications. Make Honeywell/Bosch/Pelco Each 9875.00 Rs. Nine Thousand Eight Hundred Seventy Five Only

49 27.28 Supplying, installation, testing and commissioning of 8 port manageable PoE switch 10/100/1000 8 port with 2 giga SFP uplink L2 managed PoE switch power budget max 96 w single port 30 w AI extend AI VLAN As per the specifications Make: Dlink/Hik vision/SE Each 7903.00 Rs. Seven Thousand Nine Hundred Three Only

50 27.37 Supplying, installation, testing and commissioning of 4 TB Surveillance Hard disk drive Complete as required. Make: Toshib/Hitach/WD Each 8437.00 Rs. Eight Thousand Four Hundred Thirty Seven Only

51 27.45 Supplying, installation, testing and commissioning of 6U Indoor Rack Wallmount 6U 630D With Front Glass Door Lock & Key 550 4U-(fan +PDU+Cable Manager) etc Complete as per required Make: ValRack/President/Dlink Nos 3094.00 Rs. Three Thousand Ninety Four Only

52 27.46 Supplying, installation, testing and commissioning of 9U indoor Rack Wallmount 9U 630D with front glass door lock & key 550 9U-(with 1U cable manager fan;6 socket PDU) complete as required Make: ValRack/President/Dlink Each 3677.00 Rs. Three Thousand Six Hundred Seventy Seven Only

53 27.49 Supplying, installation, testing and commissioning of following size LED Monitor, table/wall mount with inbuild speaker minimum 5Wx2, with minimum 1 No of HDMI and USB port including remote control, connecting cable, batteries, and all accessories, connection etc complete as per specification. Make: Lenovol/LG/Dell

27.49.1 32 inch Each 19315.00 Rs. Nineteen Thousand Three Hundred Fifteen Only

54 27.7 Supplying, installation, testing and commissioning of add on item junction box installed with mount frame inside for krone 10 pair disconnection/disconnection modules corrosion free impact resistant, water proof mild steel stable and maintenance free with same size crone module as junction box.

27.70.1 20 pair junction box Each 2594.00 Rs. Two Thousand Five Hundred Ninety Four Only

Sub Engineer (Elect.) Chhattisgarh Housing & Infrastructure Development Board Electrical Sub Division - Nava Raipur Assistant Engineer (Elect.) Chhattisgarh Housing & Infrastructure Development Board Electrical Sub Division - Nava Raipur Executive Engineer (Elect.) Chhattisgarh Housing & Infrastructure Development Board Electrical Division -Raipur