Loading
Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹3.1 L
Closing Date
5 Feb 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
SLN PRG
13 conditions · 2 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The Tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or One similar work each costing not less than the amount equal to 60% of advertised value of the tender. Similar nature for this work is "CTR/TRR/TFR/TTR including Raising of track, screening, distressing of track, pre & post works for track maintenance machine like tamping machines, ballast screening/regulating machines & TTR by T- 28" is for technical experience/competence of advertised work in terms of Pr. Chief Engineer Circular No. 610 (Revised-3). As per the HQ/NDLS letter No. 74- W/0/Pt.XXV/Similar Nature of Works/WA dated 22-01-2020.
14 conditions · 10 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
In case of other than Company/Proprietary firm, Annexure-XXIV- (A) shall also be submitted by the each member of a Partnership firm /Joint venture(JV)/Hindu undivided Faimly(HUF) /Limited liability partnership (LLP) etc. as the case may be.
I/We have read and understood the tender document and all attached documents carefully. I abide by all the conditions specified in the Tender Document and all other attached documents.
No post tender correspondence for submission of additional documents shall be entertained after opening of the Technical & Commercial offers. Even suo-moto post tender letters of the tenderer shall be treated as Null & Void.
All financial documents required in Tender Document such as PAN card, GSTIN, Registration Certificates, Turnover certificate (Annexure-VII-B) duly certified by Chartered accountant, Certified copies of balance sheet etc required to be uploaded by the Tenderer.
The Tenderer should upload documentary proof regarding the nature and composition of firm as required by Tender Document such as Partnership deed, Power of attorney if partnership firm / Affidavit if firm is Sole proprietor/MOU, Article of Association and Registration in companies act, if Registered company.
Cover letter as provided in Tender Document (Section 4.2, Tender Form-1) required to be uploaded by the Tenderer on its letter head.
General information of the Tenderer as provided in Tender Document (Section 4.3, Tender Form-2) to be uploaded by by the Tenderer .
An Undertaking/Affidavit stating blacklisting status of Partners and Partnership firm (In case of Partnership firm, affidavit/undertaking must be signed by all the Partners) or Proprietor and proprietor firm or company and its constituents, Joint Venture and their constituents as per nature of firm to be upload by tenderer. An undertaking/affidavit regarding non blacklisting should be date of opening of bid to date of closing of bid.
List of engineers/personnel already available/ proposed to be employed for deployment on this work , required to be uploaded by the Tenderer as per Annexure-X of Tender Document.
Details of Plants and Machinery already available with the firm required to be uploaded by the Tenderer as per Annexure-IX of Tender Document .
Details of Electronic transfer of funds to the beneficiary as per the Annexure XII of the tender document.
Any other document as required in the Tender Document or deemed fit by the Tenderer required to be uploaded.
Power of attorney as per the tender form 3 to be uploaded in favour of the person signing the tender document.
Sultanpur and Sindurwa Yard Improvement & Layout correction work under SR- DEN-IV-LKO.
31-SR-DEN-IV-LKO-2025-26~NR
31-SR-DEN-IV-LKO-2025-26
Open
Works - General
12 Months
Lucknow, Uttar Pradesh
₹0
₹3.1 L
5 Feb 2026
14 Jan 2026
22 Jan 2026
75 items across 18 schedules · ₹3,19,25,701.04 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | Up to 40 m long rail panel | RM | 1500.00 | 10.51 | 15,765 |
| 2 | For Through Rail Renewal work | TRM | 3000.00 | 51.55 | 1,54,650 |
| 3 | For Casual/Scattered Rail Renewal work | RM | 500.00 | 40.73 | 20,365 |
| 4 | For Through Rail Renewal work | TRM | 3000.00 | 53.16 | 1,59,480 |
| 5 | For Casual/Scattered Rail Renewal work | RM | 500.00 | 43.13 | 21,565 |
| 6 | Locations other than Ballasted Deck Bridge | Each | 3000.00 | 544.17 | 16,32,510 |
| 7 | Through Fitting Renewal (TFR) on PSC track, comprising of renewal of Grooved Rubber Pads, Liners and ERCs without damaging PSC sleepers. Scope includes removal of all fittings, cleaning of rail seat, rail flange at liner seats, and eye of Inserts with wire brushes and applying Grease Graphite Grade "O" (IS:408) to eye of insert and central leg of ERC with contractor's grease of Railway's specification, fixing all fittings in correct position and sealing liner edges with grease all complete including collection and stacking of released materials at nominated locations within SSE Jurisdiction as directed by Engineer-in-Charge. Note: All the fittings will be supplied at SSE/Stores/Depot. | Sleeper | 17000.00 | 27.16 | 4,61,720 |
| 8 | Lubrication of Elastic Rail Clips on PSC sleepers with contractor's grease, conforming to Railway's specifications, labour etc. complete as per procedure prescribed in latest edition of IRPWM. | ERC | 110000.00 | 3.34 | 3,67,400 |
| 9 | By using Contractor's Grease Graphite | Each | 9000.00 | 37.95 | 3,41,550 |
| 10 | GRSP | Each | 5000.00 | 23.91 | 1,19,550 |
| 11 | ERCs | Each | 8000.00 | 7.98 | 63,840 |
| 12 | Metal/GFN Liners | Each | 8000.00 | 5.32 | 42,560 |
| 13 | Renewal of seized Plate/Rail screws on PSC Sleepers by using gas or any approved methods, duly drilling holes in broken screw and removing existing screw pieces from the holes along with existing dowels and fixing new contractor's dowels (procured from RDSO approved sources) and grouting around dowel with Epoxy materials of approved specification and refixing new Railway's rail/Plate screws duly greasing the screw with specified grease with all contractor's materials, consumables, tools & plants, labour with all lead, lift. Note: 1.Seized screws shall be identified and marked by JE/P.Way and verified at minimum SSE/P.Way In charge) level. 2. Due care shall be taken to avoid any damage to the sleeper 3.A penalty of 50% of the basic cost of new sleeper in nearest sleeper factory shall be levied on each, if sleeper gets damaged in the process. | Each | 700.00 | 158.79 | 1,11,153 |
| 14 | Rail section of 52Kg and above | Each | 250.00 | 110.37 | 27,592.5 |
| 15 | Renewal of existing SEJ with improved SEJ with PSC sleepers under traffic block conditions as per approved drawing including fixing of special size bearing plate, rubber pad and other sleeper / rail fittings, greasing to the fittings, leading rails, sleepers & fittings to site, leading and stacking of released materials within a lead of 250m, cutting of Rails, drilling of holes, fixing of related fittings, providing temporary connection with fishplates till welding of SEJ is done and sleepers shall be given initial packing to make track fit for 20KMPH speed. Note: (1) Rail cutting and hole drilling shall be paid separately. (2) One set comprise complete SEJ on both rails at SEJ. | Set | 20.00 | 9,657.84 | 1,93,156.8 |
| Schedule total | ₹37,32,857.3 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
stdpdf_1.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .