Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.4 CrAdmitted-Finance | ₹1.4 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Recktronic Devices and Systems L1 |
|---|---|---|---|---|
| 1.00 | Supply and Fixing in Replacement of Indoor type Programmable Logic Controller based Valve Automation Panel suitable for control and/or monitoring of 12 Motorised Valves and 1 Ultrasonic Level Sensor The panel should be of suitable size fabricated from 2.0 mm thick CRCA sheet and properly powder coated. The Panel should have the following features complete all as specified and directed by the Engr-in-charge:
PLC with following specifications:-
(i) Suitable Digital inputs/ outputs,
(ii) 4 serial ports supporting open communication protocol, 01 No. Ethernet port,
(iii) Programming software based on IEC to facilitate building of custom built function blocks
(iv) Expandable up to 192 DI / DOs.
(v) 01 No. SMPS of 5 A rating (Make: SCHNEIDER / NHP)
(vi) Suitable no. of interposing relays 24 V D.C. coil rating, 4 pole and 2 A contact rating.
(Make: OEN / OMRON / IDEC / ALLEN BRADLEY)
(vii) Selector Switches as per requirement
(vii) Selector Switches as per requirement
The control logic shall be as directed by the Engineer In Charge for Automatic Operation of Motor Actuated Valve,
Supply: 230V, 50 Hz
Compatible with OFC based and GPRS communication.
Mounting: Grouted on floor/on Wall
Location:- New Navy Nagar Ground | 1 | Each | 2,85,000 ₹2,85,000 Lowest |
| 2.00 | Supply, Installation Testing & Commissioning of Motor Actuated Ball Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 40 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting :Direct on valve | 1 | Each | 36,000 ₹36,000 Lowest |
| 3.00 | Supply, Installation Testing in replacement of Motor Actuated Ball Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 50 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting :Direct on valve | 1 | Each | 38,500 ₹38,500 Lowest |
| 4.00 | Supply, Installation Testing in replacement of Motor Actuated Ball Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting :Direct on valve | 1 | Each | 42,000 ₹42,000 Lowest |
| 5.00 | Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting :Direct on valve | 1 | Each | 54,000 ₹54,000 Lowest |
| 6.00 | Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting :Direct on valve | 1 | Each | 78,000 ₹78,000 Lowest |
| 7.00 | Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 200 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. | 1 | Each | 89,000 ₹89,000 Lowest |
| 8.00 | Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 250 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. | 1 | Each | 1,14,500 ₹1,14,500 Lowest |
| 9.00 | Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 300 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge.
Specifications & Features
Input Voltage: 230 V, A.C.
Designed line pressure: 10 kg/sq. cm.
Operating Angle: 90 degrees
Disc Material: CI with nylon coating
Limit Switches : 02 Nos.For open and close status
In built Serial / USB communication Port
In built data logger with memory
In built SD Card
Space Heater
Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required. | 1 | Each | 1,39,800 ₹1,39,800 Lowest |
| 10.00 | Supply, Installation Testing in replacement of Float type Point Level Sensor with the following specifications complete all as specified and directed by the Engr-in-charge;
Type: Magnetic
Magnet: Ring type
Switch: Reed Switch (Epoxy sealed)
Connecting Cable: Teflon | 25 | Each | 800 ₹20,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹1.3 L
Closing Date
25 Mar 2024, 6:00 pmClosed
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
COMPREHENSIVE MAINTENANCE OF SCADA SYSTEM FOR WATER SUPPLY NTEWORK IN NAVY NAGAR AND NOFRA AREA UNDER GE (NW) NAVY NAGAR, COLABA, MUMBAI
2024_MES_644654_1
8150/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
330 days
GE (NW) Navy Nagar
Class C
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Navy Nagar
₹1.3 L
Yes
6 Apr 2024
29 Feb 2024
27 Mar 2024
29 Feb 2024
25 Mar 2024
7 Mar 2024
29 Feb 2024 - 6 Mar 2024
Amount
Supply, Installation Testing & Commissioning of Motor Actuated Ball Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 40 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting :Direct on valve
Supply, Installation Testing in replacement of Motor Actuated Ball Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 50 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting :Direct on valve
Supply, Installation Testing in replacement of Motor Actuated Ball Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 80 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting :Direct on valve
Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 100 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting :Direct on valve
Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 150 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting :Direct on valve
Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 200 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 250 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply, Installation Testing in replacement of Motor Actuated Butterfly Valve consisting of Quarter turn single phase Actuator and Wafer type butterfly valve of size 300 mm dia with appropriate bracket/mounting arrangement including two nos. limit switches for open and closed condition and splash proof enclosure complete all as specified and directed by the Engr-in-charge. Specifications & Features Input Voltage: 230 V, A.C. Designed line pressure: 10 kg/sq. cm. Operating Angle: 90 degrees Disc Material: CI with nylon coating Limit Switches : 02 Nos.For open and close status In built Serial / USB communication Port In built data logger with memory In built SD Card Space Heater Mounting ::Extended type with universal joint for installation 18 -24 inches above ground level with angle mounting including raising of existing chamber if required.
Supply, Installation Testing in replacement of Float type Point Level Sensor with the following specifications complete all as specified and directed by the Engr-in-charge; Type: Magnetic Magnet: Ring type Switch: Reed Switch (Epoxy sealed) Connecting Cable: Teflon
Supply, Installation Testing in replacement of motor actuated ball valve suitable for 25 mm GI pipe for priming of pump including all necessary GI fittings with following specifications complete all as specified and directed by the Engr-in-charge : Size: 25 mm Pressure rating: 10 kg / sq. cm.
Supply, Installation Testing in replacement of pressure Transmitter with following specification including necessary power pack for supply of DC complete all as specified and directed by the Engr-in-charge : Power supply: 10-36 V DC Process connection: G ½ “ Enclosure: whether proof IP 65 Process temperature: -30 to 120 Celsius Accuracy: 0.25 % Make: Danfoss / Siemens / E & H
Material and labour for Mild steel iron fittings and nut bolt washer complete all as specified and directed by the Engr-in-charge
Supply , Installation Testing & Commissioning of Dual GPRS Modem with OFC Infrastructure like 24 Port Smart Switch, pigtails, LIU Bracket with LIU, Patch cord with 1.5 Meter length, SFP Module, SM duplex adaptor and necessary accessories for Panel communication purpose including cost of communication for 11 Months complete all as specified and directed by the Engr-in-charge
Integration of Existing SCADA System complete all as specified and directed by the Engr-in-charge specified as follows: SCADA Configuration: (a) Addition of required OPC Server tags. (b) Addition of required SCADA Tags (c) Addition of required Data log Module. (d) Addition of required App Module (e) Addition of required Reporting & SMS Utility Development: (a) SCADA Screens for new Updated Panel configuration. (b) Layout for App new Updated Panel configuration. (c) Report Format new Updated Panel configuration Integration of OPC Sever with SCADA: (a) Tags binding – OPC to SCADA, (b) Tags binding – SCADA to Screen Objects (c) Tags binding – Data log module (d) Tags binding – SCADA to App (e) Tags binding – SCADA to Reporting Software. (f) Tags binding – SCADA to SMS Utility Software On site development: (a) Modifications in SCADA Screens. (b) Modifications in reporting format (c) Modifications in App layout NOTE: Modification to SCADA Screens can be performed under supervision of original SCADA integrator/ Developer.
Supply and fixing in replacement of internal steel water tubing of dia 50mm, galvanised, Medium grade with all fittings in shafts such as nipple, union, socket, elbow, bends, fixed to wall / laid in ground including necessary fixing arrangement such as GI clamps, wooden saddle, screws complete all as specified and directed by Engineer-in-Charge. Note : Excavation and earth work required for the item will be measured separately under relevant items.
Construction of brick masonry valve chamber of size 1.2m x 1.2m x 1.2m (internal dimensions) (above GL 0.30m) suitable for fixing sluice valve, 15mm thick foundation using PCC 1:4:8 type D2 using 40mm graded stone aggregate over 15cm thick hard core of broken stone, 23cm thick brick walls built in CM (1:4), 15mm thick internal & external plaster finished even and smooth without using extra cement, 5mm thick MS cover plate on 50mm x 50mm x 6mm angle iron frame work embedded in PCC arrangement, hold fasts, suitable locking arrangement etc. applying one coat of red oxide primer & two coats of synthetic enamel paint on steel surfaces including earth work & excavation in any type of soil including disposal of debris outside MD land complete all as specified and directed by Engineer-in-Charge.
Disconnecting carefully Motor actuated butterfly valve of any capacity/model/make from over head tanks,valve chambers,pump houses dismantling for repair/maintenance by taking out bearings, gear boxes,limit switches or any other accessories and cleaning,greasing,setting, soldring,programming if required, re-assembling the actuator after cleaning & servicing including re-fixing in exising position, testing complete all as specified and directed by the Engr-in-charge Note :- (a) All minor items shall be included in the item rate. (b) Only one time shall be paid to the contractor per particular in complete contract period insted of number of times attending for repair/replacement of repair/replacement of materials.
Repair/Maintenance of following items, by disconnecting from exisiting system, cleaning, lathing if required, greasing, Servicing and refixing in original position and testing complete all as directed by Engr-in Charge :-
Pressure switch
Solenoid switch / Priming Valves
Water level sensor
Supply and fixing on walls and connecting in repair, 5 pair 0.5 Sqmm armoured communication cable with copper conductor complete all as specified and directed by the Engr-in-charge
Supply and fixing on walls and connecting in repair, 2 core 1.5 sqmm armoured cable with copper conductor complete all as specified and directed by the Engr-in-charge
Supply and fixing on walls and connecting in repair, 4 core 1.5 sqmm armoured cable with copper conductor complete all as specified and directed by the Engr-in-charge
Supply & fixing in replacement of laying in trenches and connecting in repair, 6 core 1.5 sqmm armoured cable with copper conductor complete all as specified and directed by the Engr-in-charge Note : Excavation and earth work shall be measured and paid separately.
Supply & fixing in replacement of heat shrinkable jointing kit complete all as specified and directed by the Engr-in-charge
Supply & fixing in replacement of Optical Fiber cable which has to be pulled over head and duly fastened/attached to a messenger wire or a stay wire of gauge either with the required clamps of suitable size not more than 3 feet apart or with a web between the OFC and messenger wire along with end plates at both ends of the suspended cable complete all as specified and directed by the Engr-in-charge i) 6F Single mode OFC suitable for outdoor networking applications (1) 6 Fibers type single mode, wavelength 1310, Attenuation 0.38/km (2) Outer jacket of HDPE sheath (3) Jelly Filled Core (4) Wrapped with Corrugated Steel Tape (5) Armoured with a pair of Steel Wire for rigidity (6) Anti Termite and rodent repellent (7) Water Proof and moisture resistant Make Finolex, Dlink
Supply & fixing in replacement of High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches of size 25 mm bore complete all as specified and directed by the Engr-in-charge
The Annual Maintenance Contract (AMC) for all existing items including SCADA Panel WiMax, GPRS, MOV Solenoid valve , pressure switch,water level sensor including software of SCADA panel as well as computer parts configuration with the existing SCADA system all parts are mentioned below, refixing old serviceable parts if any including the following work services complete all as specified and directed by the Engr-in-charge:- Skilled Technician with adequate experience in SCADA components, its operation and maintenance alongwith functions such as pumping and supply of water for each area for 24 hrs per day including holidays and sundays for the following locations: (i) KANYA Pump House (ii) CPH Pump House (iii) Main Pump House (iv) R-28 Pump House (v) Robert Road Pump House . (vi) Chenab Pump House . (vii) Narmada Pump House . (viii) WNC (O) Pump House . (ix) JD Pump House . (x) Acharya niwas Pump House. (xi) DW-12&13 Pump House . (xii) Dhanush Pump House. * In case of defects not being rectified with in 3 hours,penalty of Rs 500/ day shall be charged. (a) Establishing Ladder Logic programming onance alongwith f the PLC / Relay Logic based Automation Control Panel at any location along with Switch Configuration User Configuration, Sophos Server Config, Wimax Config, GPRS Config as directed by the Engineer in charge. (b) Checking of system fortnightly and necessary servicing/repair and a report for the same shall be maintained. (c) Emergency complaints at any time shall be attended after receiving the same. (d). Master Control sation with personal computer with latest processor and monitor of suitable size .
(e) UPS with half an hour backup, (f) Laser Printer (g) Items are including in the AMC ie. Single phase preventer,Relay, LED indicators for panel , 7th Gen Core i5, 16 GB RAM , 2 TB DATA hard disk, window 10 Pro,4 USB2.0, 1GB Ethernet, 1 HDMI, 1 VGA, LED Monitor, Key board, mouse , anti virus software, MS Office Pro, UPS all Sizes, 32 inch LCD monitor Design, Develop, Integrate and Commission SCADA System along with various analysing equipment for water Supply System as indicated in the layout diagram enclosed and as per details attached at Table. The SCADA system shall comprise shall comprise of following :- (h) Server (j) Data Gateway (k) SCADA software which can be operated,programmed and modified by agencies other than developer (l) PLC/Microprocessor Controllers with indoor/outdoor applications for water sensing display,pump operation with RTU/without RTU or Microprocessor controller and microprocessor transmitter (m) Suitable communication system including payment of bills to telecom service provider. (n) Motorised butterfly valves (o) Pressure transmitters. (p) Ultrasonic sensors (q) Flow meter and Switchs (r) Air release solenoid valves (s) LCD Display TV of any size connected to SCADA System.
Notes 1 : (i) New parts required to be replaced as supply and fixing which shall be measured and paid under relevant items of the schedule here-in-under. (ii) 01 No Engineering graduate trained by manufacturer of the PLC based control panel with knowledge of operation of the system on SCADA and trouble shooting with respect to all sub sysytems viz., computers, all software, motorised and solenoid valves, pressure transmitters, ultrasonic and magnetic level sensors, communication equipment etc., of the automated system. (iii) LED TV checked at ground / installation site and quoted the rate accordingly.
Note 3 : The following documents should be maintained by the SCADA operator relating to the pumping and supply . All connected reports submitted to the concerned JE/Engr-in-Charge on daily basis at 10:30 Hrs in AGE (E/M) (W/S) :- (i). Attendance register . (ii) . Log sheet (iii). Valve and sensor failure report.. (iv). Defect rectified report (v). Meter reading report . (vi). Water received report from BMC (vii) . All the stationary items will be provieded by the contractor. (viii) . All the safety equipments shall be provided by the contractor to the staff.
New parts in replacement for the items as mentioned under item No 27.00 above for the items in BOQ SL No 29.00 to 80.00 as under complete all as specified and directed by the Engr-in-charge :
Supply & fixing in replacement of PLC (Programmable Logic Controller) comprising of Main Controller, MMI with display, input/output.
Supply & fixing in replacement of Water Level Controller PCB-5 Level.
Supply & fixing in replacement of Push button with LED Indicator, 240 V, AC,. Colour (Red/yellow/Green) as ordered.
Supply & fixing in replacement of Interval /On delay Timer.
Supply & fixing in replacement of Weekly / daily timer.
Supply & fixing in replacement of Solenoid Valve 10mm/15mm 230 VAC.
Supply & fixing in replacement of Coil for Solenoid Valve 15mm/10mm 230 V AC.
Supply & fixing in replacement of Magnetic Level switch.
Supply & fixing in replacement of Pressure switch 0-10 Kg/sqcm.
Supply & fixing in replacement of Pressure gauge 0-100 Pascal.
Supply & fixing in replacement of Electric motor suitable for actuator of size 50 mm dia.
Supply & fixing in replacement of Electric motor suitable for actuator of size 80mm dia
Supply & fixing in replacement of Electric motor suitable for actuator of size 100 mm dia
Supply & fixing in replacement of Electric motor suitable for actuator of size150 mm dia
Supply & fixing in replacement of Electric motor suitable for actuator of size 200mm to 250 mm dia
Supply & fixing in replacement of Electric motor suitable for actuator of size 300 mm dia
Supply & fixing in replacement of MS Spiral gear for gear box or actuator suitable for Butterfly Valve of size 50 mm dia.
Supply & fixing in replacement of MS Spiral gear for gear box or actuator suitable for Butterfly valve of size 80 mm dia
Supply & fixing in replacement of MS Spiral gear for gear box or actuator suitable for Butterfly valve of size 100 mm dia
Supply & fixing in replacement of MS Spiral gear for gear box or actuator suitable for Butterfly Valve of size 150 mm dia
Supply & fixing in replacement of MS Spiral gear for gear box or actuator suitable for Butterfly Valve of size 200/250 mm dia
Supply & fixing in replacement of MS Spiral gear for gear box or actuator suitable for Butterfly Valve of size 300 mm dia
Supply & fixing in replacement of MS Sector gear for gear box or actuator suitable for Butterfly valve of size 50 mm dia.
Supply & fixing in replacement of MS Sector gear for gear box or actuator suitable for Butterfly valve of size 80 mm dia
Supply & fixing in replacement of MS Sector gear for gear box or actuator suitable for Butterfly valve of size 100 mm dia
Supply & fixing in replacement of MS Sector gear for gear box or actuator suitable for Butterfly valve of size 150 mm dia
Supply & fixing in replacement of MS Sector gear for gear box or actuator suitable for Butterfly valve of size 200/250 mm dia
Supply & fixing in replacement of MS Sector gear for gear box or actuator suitable for Butterfly valve of size 300 mm dia
Supply & fixing in replacement of Ball valves of Size 50 mm dia PN 1.0
Supply & fixing in replacement of Butterfly valves of Size 80 mm dia PN 1.0
Supply & fixing in replacement of Butterfly valves of Size 100 mm dia PN 1.0
Supply & fixing in replacement of Butterfly valves of Size 150 mm dia PN 1.0
Supply & fixing in replacement of Butterfly valves of Size 200 mm dia PN 1.0
Supply & fixing in replacement of Butterfly valves of Size 250 mm dia PN 1.0
Supply & fixing in replacement of Butterfly valves of Size 300 mm dia PN 1.0
Supply & fixing in replacement of Motorized actuator suitable for Ball valve of size 50/80 mm dia.
Supply & fixing in replacement of Motorized actuator suitable for Butterfly valve of size 100 mm/150 mm dia
Supply & fixing in replacement of Motorized actuator suitable for Butterfly valve of size 250 mm/200 mm dia
Supply & fixing in replacement of Motorized actuator suitable for Butterfly valve of size 300mm dia
Supply & fixing in replacement of Capacitor & Resistor (R C Circuit) for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia Butterfly Valve
Supply & fixing in replacement of Hand Wheel for Actuator suitable for Butterfly Valve 50 to 300 mm dia
Supply & fixing in replacement of Limit switch for Actuator suitable for 50 / 80 / 100 / 150 / 200 / 250 / 300 mm dia Butterfly Valve
Supply & fixing in replacement of Top cover for Actuator suitable for Butterfly Valve of any size/type.
Supply & fixing in replacement of SMPS input 230 V/AC, Output 24 V DC.
Supply & fixing in replacement of Ultrasonic Level Transmitter Range : 0-5 metres Accuracy : 0.5 % minimum Supply Voltage : 24V dc Output : 4-20 mA Ultrasonic Frequency:75 kHz burst, rep. rate 96 ms
Supply & fixing in replacement of Rack mountable Web Smart Switch with 28 ports and POE for CPE hardware and following specifications i) Number of Ports 24 10/100Base-TX Ethernet ports 2 ,10/100/1000BASE-T 2 Combo 10/100/1000BASE-T/SFP ii) Port Standards & Functions • IEEE 802.3 10BASE-T Ethernet (twisted-pair copper) • IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted-pair copper) • IEEE 802.3x Flow Control • IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper) • IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 • IEEE 802.3z Gigabit Ethernet (fiber) ANSI/IEEE 802.3 Switching Capacity • 12.8 Gbps Make Siemens, Dlink, Ubiquiti, Cisco
Supply & fixing in replacement of SC-SC Duplex SM Patch Cord 0.9 mm dia of suitable length (a) Size 0.9mm dia (b) Insertion Loss <=0.2 db, max 0.3 db (c) Return Loss PC>=45dB, UPC>=50dB, APC>=60dB (d) Connector Ferrule Ceramic (e) Apex Offset <50um (f) Fiber Height +-100nm (g) End Face Radius of Curvature 7mm<R<25mm (h) Repeatability <=0.2 dB 1,000 times mating cycles (j) Working Temp -40deg C to +85 deg C with all necessary set of other joints
Supply & fixing in replacement of CAT6 UTP 24 AWG Patch Cord of suitable length, Plug 30U snag less
Supply & fixing in replacement of GPRS modem based communication module suitable for SIM card service providers . The module shall be programmed to automatically toggle between the service providers based on the actual signal strength. However communication charges has not been included above.
Supply & fixing in replacement of Outdoor type Wimax Base Station operating on license free frequency of 5 Ghz complete with the necessary hardware along with suitable single or multiple antennas directional /sector mounting pole/tower of suitable height and accessories, power supply etc at a suitable location to be connected to the central scada server so as to establish connectivity with every end node (CPE) of the network after conducting a Radio survey of the entire area of interest and identifying suitable locations to mount the radio hardware and the height of the antennas to establish clear line of sight either directly or by multi hop so as to be enable to send data from each node to the base station at the central server location
Supply & fixing in replacement of Outdoor type Wimax CPE stations operating on license free frequency of 5 Ghz at suitable locations along with suitable antenna complete with mounting pole and accessories to be connected to the ofc network of each node and establish wireless connectivity with the central server
Supply & fixing in replacement of Ethernet Switch –16 port GBPS layer 2 manageable switch
Excavating in trenches not exceeding 1.5 Mtr depth and 1.5 Mtr wide and getting out in soft/ loose soil all complete all as specified and directed by the Engr-in-charge
Returning, filling in, including spreading, levelling, watering and well ramming in each layer not exceeding 25 cms thick after laying and testing of cable complete all as specified and directed by the Engr-in-charge
Removing of excavated material to a distance not exceeding 50 meter and depositing where directed at level not exceeding 1.5 meter above the starting point complete all as specified and directed by the Engr-in-charge
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .