Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | FIRST₹29.4 LAccepted-AOC 34 B A HOUSE NO 253 3 SECTOR C KALERHARI CHURCH ROAD AMBALA CANTT 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | FIRST | Accepted-AOC BEING LOWEST | |
| 2 | SECOND₹33.0 LRejected-Finance | SECOND | Rejected-Finance BEING NOT LOWEST | |
| 3 | THIRD₹33.8 LRejected-Finance | THIRD | Rejected-Finance BEING NOT LOWEST | |
| 4 | FOURTH₹35.0 LRejected-Finance | FOURTH | Rejected-Finance BEING NOT LOWEST | |
| 5 | FIFTH₹36.4 LRejected-Finance 704 SILVER DEAL DAFFODIL WING 1 B T KAWADE ROAD PUNE 411 001 | PUNE | PUNE | MAHARASHTRA | 411001 | FIFTH | Rejected-Finance BEING NOT LOWEST |
| Sl No | Description | Qty | Unit | Vishwas Enterprises L8 | Pacific Enterprises L3 | GKR and CO L7 | RAMSON TRADERS L4 | M/S - KRUPA ELECTRICALS L5 | navreet construction L1 | Varsha Enterprises L2 | EX SOLDIERS MECHANICAL WORKS L6 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down unserviceable post top light/Street light complete all as specified and directed. | 81 | Each | 100 ₹8,100 | 10 ₹810 | 100 ₹8,100 | 50 ₹4,050 | 40 ₹3,240 | 20 ₹1,620 | 9 ₹729 Lowest | 10 ₹810 |
| 2.00 | Taking down carefully unserviceable junction box / MCBs of any type and capacity complete all as directed by EIC. | 100 | Each | 100 ₹10,000 | 10 ₹1,000 | 100 ₹10,000 | 30 ₹3,000 | 25 ₹2,500 | 10 ₹1,000 | 9 ₹900 Lowest | 15 ₹1,500 |
| 3.00 | Taking up underground unservicable cable of any size from existing trench including bricks, etc and removing of materials from work site all as directed by Engr-in-charge. | 1,065 | RM | 90 ₹95,850 | 100 ₹1,06,500 | 35 ₹37,275 | 50 ₹53,250 | 10 ₹10,650 | 10 ₹10,650 | 9 ₹9,585 | 5 ₹5,325 Lowest |
| 4.00 | M&L high mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a octagonal section, masts should be in two sections for 16 Mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimation of helical stress concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single dip) internally and externally, having uniform coating thickness of 85 microns for bottom and 65 microns for top sections. The top section should be 3mm thick and bottom 4mm thick with door opening size 1000x300mm at base of the mast. The base plate should not be less than 670x670x25mm with 08 Nos bolts of M30 dia of length 850mm long (PCD of foundation bolts 460) and provision with lantern carrage made out of MS IS-2062 channel, MG-75 or 60mm square tube, 750 Kgs of load carrying capacity with double drum which oparated by motor 1.5KW/2.0HP as well as manual provided with stainless steel wire rope grade AISI-316,6mm dia of 3 Nos for lantern carriage and 02 Nos for doubel drum winch, 2350 Kgs per stainless steel rope of breaking capacity, construction 7/19 and providing of power tool integral motor re-reversible 180 to 260 RPM, 415 volts, and adjustable torque limitor all as directed. Trailing cables should have 10 core 4 Sqmm and have 09 Nos of LED (09 Nos of 1x120 watts accessories like super for all fittings) including Aviation obstruction light, lightning arrester spike with earth connected and all specifications are complete as specified and directed. | 2 | Each | 3,60,000 ₹7,20,000 | 3,50,000 ₹7,00,000 | 3,65,000 ₹7,30,000 | 3,75,000 ₹7,50,000 | 3,75,000 ₹7,50,000 | 2,55,000 ₹5,10,000 Lowest | 3,00,033 ₹6,00,066 | 3,95,000 ₹7,90,000 |
| 4.01(Note :- Necessory earth work of any type of soil, foundation, PCC/RCC work, removal and return filling of soil etc with the following specifications:- (i) Excavation in soft/loose soil of size 2.30x2.30x1.5mtr (ii) PCC (1:4:8) type D2 of size 2.30x2.30x0.10mtr (iii) RCC as in mat slab of size 2.10x2.10x.3mtr reinforced with 10mm TMT bars 250mm c/c both ways. (iv) RCC in pedestal of size 1.00x1.00x1.40 (1.10mtr below ground level and 0.30 mtr above GL) reinforced with 24 Nos of 12mm TNT bars with stirrups 8mm TMT @100 c/c. Mast structure should have design to sustain an assumed maximum reaction arising from wind speed as per IS-875(Part3) 1987(three seconds) which is measured at a height of 10mtrs above ground level. High mast should be suitable for a wind speed of 225 Kmph and as directed.) | |||||||||||
| 5.00 | Supply , fixing LED highbay lights 120 watts with housing IP-65and IK 07, circular high pressure die cast aluminium housing and manufacture logo embossed on the housing and high transmittance tempered glass cover, optics lens with lens plate having NB and WB optics , system efficacy>120 lumens /watt, xitanium driver-IP 66 complying to IEC61347-2-13 certification like CE ENEC, ROHS, with rated life of 50000 hrs for driver at TC-80 degree C along with all safely features , thermal protections, protection against input over voltage< 320 volt Ac for 48 hrs , driver failure rate ,0.2% per 1 Khr @ TC 70-80 Deg C, wattage 120 Watts , internal wiring-teflon SDCM<5, CCT -5700, CRI>80, THD<20 at max load , third harmonics <20%, PF>.95 colour temperature 6500k, all are specified and as directed | 12 | Each | 5,100 ₹61,200 | 4,000 ₹48,000 Lowest | 8,000 ₹96,000 | 5,800 ₹69,600 | 5,000 ₹60,000 | 6,200 ₹74,400 | 4,230 ₹50,760 | 5,500 ₹66,000 |
| 6.00 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 4 core complete all as specified and directed. NOTE: Excavation & Earthwork, sand cushioning & Brick protection shall be measured & paid seperately | 250 | RM | 450 ₹1,12,500 | 300 ₹75,000 | 320 ₹80,000 | 340 ₹85,000 | 310 ₹77,500 | 240 ₹60,000 Lowest | 324 ₹81,000 | 290 ₹72,500 |
| 7.00 | S&F CPRI approved feeder pillar box, outdoor type totally enclosed vermin proof of size 1200 x 900 x400mm double door both front and back side with locking arrangement, prewired made out of 3mm thick CRCA sheet with 04 Nos legs MS angle iron 40x40x6mm size 0.6mtr long suitably grouted in ground with PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) and cement plaster 1:4 including two coats of synthetic enamel paint over a coat of rid oxide primer and S&F aluminimum busbar 400 amps rated duly colour coded 04 nos and connected through copper wire of appropriate size to connect the various accessories like MCCB MCB conductor etc to be accommodated in it and connecting incoming and outgoing cable by means of necessary lugs gland PVC tape including testing on complete all as specified and directed by Engr-in-Charge including (i) MCCB 160 A 4 pole 36 KA -01 No Incoming (ii) MCCB 63 A 4 pole 25 KA -03 No's Outgoing (iii) MCB DP 32 Amp 10 KA- 03 Nos Outgoing (iv) Digital voltmeter and Amp meter including all accesories required for fixing. | 2 | Each Job | 1,08,000 ₹2,16,000 | 1,00,000 ₹2,00,000 | 28,000 ₹56,000 | 30,000 ₹60,000 | 1,12,000 ₹2,24,000 | 24,500 ₹49,000 Lowest | 36,000 ₹72,000 | 75,000 ₹1,50,000 |
| 8.00 | M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified & as directed. | 4 | Each | 7,000 ₹28,000 | 9,000 ₹36,000 | 12,500 ₹50,000 | 6,000 ₹24,000 | 7,800 ₹31,200 | 6,500 ₹26,000 | 5,850 ₹23,400 Lowest | 7,500 ₹30,000 |
| 9.00 | Supply and fixing LED Solar street light fitting 36 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. (Excavation & earth work shall be measured separately) | 30 | Each | 46,200 ₹13,86,000 | 22,000 ₹6,60,000 Lowest | 45,000 ₹13,50,000 | 40,000 ₹12,00,000 | 41,000 ₹12,30,000 | 24,500 ₹7,35,000 | 39,432 ₹11,82,960 | 43,200 ₹12,96,000 |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
29 Oct 2025, 6:00 pmClosed
GE AF MARATHAHALLI
GE AF MARATHAHALLI WIND TUNNEL ROAD, KEMPAPURA, YEMALUR POST, BANGALORE. PIN- 560037
SPECIAL REPAIRS TO SECURITY /STREET LIGHTS AND MINOR WORKS AT 26ED AND GV CAMP UNDER GE (AF) MARATHAHALLI
2025_MES_734376_1
8800/E8
Open Tender
Civil Works
Item Rate
270 days
GE AF MARATHAHALLI
AS PER ENIT
7 documents required · 7 mandatory
₹500
GE AF MARATHAHALLI
₹93,000
Yes
24 Dec 2025
9 Oct 2025
3 Nov 2025
18 Oct 2025
29 Oct 2025
23 Oct 2025
Amount
Taking down unserviceable post top light/Street light complete all as specified and directed.
Taking down carefully unserviceable junction box / MCBs of any type and capacity complete all as directed by EIC.
Taking up underground unservicable cable of any size from existing trench including bricks, etc and removing of materials from work site all as directed by Engr-in-charge.
M&L high mast is fabricated from steel plates conforming to BS-EN 10025, cut and folded to form a octagonal section, masts should be in two sections for 16 Mtr heights having only longitudinal weld conforming to BS 5135/AWS. The mast is provided with fully penetrated flange which is free from any laminations or incursions. The welded connection of the base flange is fully developed to the strength of the entire section. The base flange is provided with supplementary gussets between bolt holes to ensure elimation of helical stress concentration. For environmental protection of the mast, the entire fabricated mast is Hot Dip Galvanised (Single dip) internally and externally, having uniform coating thickness of 85 microns for bottom and 65 microns for top sections. The top section should be 3mm thick and bottom 4mm thick with door opening size 1000x300mm at base of the mast. The base plate should not be less than 670x670x25mm with 08 Nos bolts of M30 dia of length 850mm long (PCD of foundation bolts 460) and provision with lantern carrage made out of MS IS-2062 channel, MG-75 or 60mm square tube, 750 Kgs of load carrying capacity with double drum which oparated by motor 1.5KW/2.0HP as well as manual provided with stainless steel wire rope grade AISI-316,6mm dia of 3 Nos for lantern carriage and 02 Nos for doubel drum winch, 2350 Kgs per stainless steel rope of breaking capacity, construction 7/19 and providing of power tool integral motor re-reversible 180 to 260 RPM, 415 volts, and adjustable torque limitor all as directed. Trailing cables should have 10 core 4 Sqmm and have 09 Nos of LED (09 Nos of 1x120 watts accessories like super for all fittings) including Aviation obstruction light, lightning arrester spike with earth connected and all specifications are complete as specified and directed.
(Note :- Necessory earth work of any type of soil, foundation, PCC/RCC work, removal and return filling of soil etc with the following specifications:- (i) Excavation in soft/loose soil of size 2.30x2.30x1.5mtr (ii) PCC (1:4:8) type D2 of size 2.30x2.30x0.10mtr (iii) RCC as in mat slab of size 2.10x2.10x.3mtr reinforced with 10mm TMT bars 250mm c/c both ways. (iv) RCC in pedestal of size 1.00x1.00x1.40 (1.10mtr below ground level and 0.30 mtr above GL) reinforced with 24 Nos of 12mm TNT bars with stirrups 8mm TMT @100 c/c. Mast structure should have design to sustain an assumed maximum reaction arising from wind speed as per IS-875(Part3) 1987(three seconds) which is measured at a height of 10mtrs above ground level. High mast should be suitable for a wind speed of 225 Kmph and as directed.)
Supply , fixing LED highbay lights 120 watts with housing IP-65and IK 07, circular high pressure die cast aluminium housing and manufacture logo embossed on the housing and high transmittance tempered glass cover, optics lens with lens plate having NB and WB optics , system efficacy>120 lumens /watt, xitanium driver-IP 66 complying to IEC61347-2-13 certification like CE ENEC, ROHS, with rated life of 50000 hrs for driver at TC-80 degree C along with all safely features , thermal protections, protection against input over voltage< 320 volt Ac for 48 hrs , driver failure rate ,0.2% per 1 Khr @ TC 70-80 Deg C, wattage 120 Watts , internal wiring-teflon SDCM<5, CCT -5700, CRI>80, THD<20 at max load , third harmonics <20%, PF>.95 colour temperature 6500k, all are specified and as directed
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 4 core complete all as specified and directed. NOTE: Excavation & Earthwork, sand cushioning & Brick protection shall be measured & paid seperately
S&F CPRI approved feeder pillar box, outdoor type totally enclosed vermin proof of size 1200 x 900 x400mm double door both front and back side with locking arrangement, prewired made out of 3mm thick CRCA sheet with 04 Nos legs MS angle iron 40x40x6mm size 0.6mtr long suitably grouted in ground with PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) and cement plaster 1:4 including two coats of synthetic enamel paint over a coat of rid oxide primer and S&F aluminimum busbar 400 amps rated duly colour coded 04 nos and connected through copper wire of appropriate size to connect the various accessories like MCCB MCB conductor etc to be accommodated in it and connecting incoming and outgoing cable by means of necessary lugs gland PVC tape including testing on complete all as specified and directed by Engr-in-Charge including (i) MCCB 160 A 4 pole 36 KA -01 No Incoming (ii) MCCB 63 A 4 pole 25 KA -03 No's Outgoing (iii) MCB DP 32 Amp 10 KA- 03 Nos Outgoing (iv) Digital voltmeter and Amp meter including all accesories required for fixing.
M & L for Earthing complete with galvanized iron or steel plate electrode 600 mm x 600 mm x 6.0 mm buried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to galvanized iron strip 32 x 6mm dia as earthing lead by means of GI bolts, nuts, check nuts and washers, earth wire protected by galvanized steel pipe 15 mm bore (light grade) connected to machinery/ equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore light grade GI pipe for watering funnel wire mesh, PCC (1:3:6), type C-1 chamber, RCC (1:2:4), type B-1, reinforced with 6 mm dia MS round bars @ 15 cm c/c both way for cover and MS frame etc., complete all as specified & as directed.
Supply and fixing LED Solar street light fitting 36 Watt including galvanized steel pole in built, lithium ion battery, solar panel, charge controller with dusk down sensor complete. (Excavation & earth work shall be measured separately)
Supply and fixing of Endura Cityliner Neo, 72 W LED Street Light fitting pressure die cast aluminium housing, heat resistance toughened glass, IP-66 protection complete all as specified and directed.
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply and fixing LED street light fitting 60 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core complete all as specified and directed. NOTE: Excavation & Earthwork, sand cushioning & Brick protection shall be measured & paid seperately
Supply and fix in repair CELESTA LED post top made in cast aluminium with decorative opal polycarbonate di user with IP 65 protection of cap 50 watt complete all as specified and directed.
Supply and fixing pole mounted junction box/bus bar chamber for loop connection of street light cable of size 295x195x100 mm with 63 amps aluminium busbar wrapped with PVC sleeves and maintained the colour code and provision of making holes with suitable clamps , GI nuts, bolts & washers for connections and mounted on hydrograpic insulators with nuts & bolts at both ends of busbar and suitable arrangement for fixing one no MCB complete all as specified and as directed. Make: Sintex , Cat No: GSJB3020 or equivalent model of Hensel/Rittel.
S&F MCB, Single pole, 6 amps, 240 volts, ‘C’ curve, 10 KA all complete as specified and as directed
Supply and fixing 2.5 Sqmm 3 Core copper conductor cable LT 1100 volt grade Conforming to IS 7098 FRLS (inner sheet) from pole junction box to light fitting with suitable size copper cable lugs and connector all complete as specified and directed.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core complete all as specified and directed. NOTE: Excavation & Earthwork, sand cushioning & Brick protection shall be measured & paid seperately
Excavation in trenches in soft /loose soil not exceeding 1.5 metre wide and not exceeding 1.5 metre deep for laying of cables etc, getting out and forming bottom surface to required gradient complete.
Excavating in trenches exceeding 1.5 m wide and not exceeding 3 m depth and not less than 1.5 m in depth for laying of cables & foundation of poles , stay assembly and getting out in any type of soil complete all as specified and directed .
Returning, filling in, including spreading levelling watering and well ramming to excavated soil in layers not exc 25 cm thick complete all as specified.
Removing excavated material not exc 50m and depositing where directed at a level not exc 1.5m above the starting point in soils complete all as specified.
Supply, laying riddled earth soil conformed IS-1255, cushioning to cables with a layer of riddle earth soil 15cm deep before laying the cable and 8 cm depth after laying of cable, complete all as specified. (Punned thickness shall be measured)
M&L for Brick protection cover on cable with sub class 'B' brick, laid dry and flat adjacent to each other complete all as specified.
M & L for G.I. tubing light grade of size 40mm bore for protection of cables to be laid under roads, crossings/culverts complete all as specified and directed.
M&L for PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations for electric poles, filling and mass concrete complete all as specified and directed.
M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate as in coping of the LT poles including form work complete all as specified
Material and labour for boring of holes under road, pavement hard standing by trenchless technology using ultra sound technique and necessary machine including HDPE pipe upto 150 mm dia suitable for 0.4 mpa working pressure.
Supply and fix GI bracket 50 mm dia bend to get shape of length 1.5 mtr duly mounted on existing LT pole including clamps, nuts & bolts all as Specified and directed by Engr-in-charge
Supply and fixing of Nature switch (using infrared sensor technology) based automatic street light control panel .This panel should be suitable enough to 3 phase load of 5 KW .Nature switch operation should be based on natural light lux level .Required illuminance level for switching ON is < 60 Lux & for switching off > 10 lux .The sensor alongwith suitable power contactors and incoming outgoing MCB should be enclosed in a pole /wall mounted rust proof ,electric shock ,termite proof and FR grade SMC Enclosure conforming to IP 54 ,The circuit should also have aprovision for manual operation (i.e sensor bypass option ) .The nature switch must have 3 phase load of 5 KW (swadeep 02EC-5kW3p with 3 nos incoming outgoing MCBs of 16 -20 Amps & 3 nos contactors (single pole /2/ pole/3 pole ) of 16-20 Amps & circuit wiring (copper) 10 mm2 complete all as specified and as directecd. Make : Swadeep
Material and Labour for maintenance free ring Earth with minimum four Nos single earth rods each pit consisting of copper coated steel rod of size 17.2mm dia 3 Mtrs long 250 Microns molecularly bonded, joined with connecting clamps filled with maintenance free earth enhancing compounds Cure+ 6 Kgs Curecon 10 Kgs,compounds strictly be a Eco friendly and must comply to IEEE 80:2000 clause 14.5 and this compound should be Electrically & Thermally conductive ,must be tested for long term in CPRI for at least 2 years to display its stability & compound must be ISO certified ,interconnecting the pit with 25mm x2mm copper strip with exothermic welding and connecting up to the ring to achieve the earth resistance value 1 ohms connected with 50 sqmm single core through PVC conduit duly fixed with spacer and saddles and all connected accessories including up to 7.5 mtrs multistranded PVC insulated copper wire up to equipement room and terminating the wire with 25mm x6mm 300mm long copper bus bar insert in the water proof suitable box fixed on wall with insulator support. Note: - (i) Soil Resistivity must be checked before designing the quantity of earth pits, accordingly design should be submitted (SRT will be charged based on the site if required) (ii) The ring main earth resistance shall be below 1 Ohms. (iii) Rate deemed to be inclusive of one HDPE inspection pit of 308mm x308mm x214mm depth. (iv) Earth pit is required to be identified by the specific marker, colour codes (a) Maint free ring earthing pit - Red colour and write proper earthing details all as directed by Engr-in-charge
Supply & Fixing L Shape MS angle iron bracket for L2 mounting rack complete all as specified & directed by Engr-in-charge
Supply & Fix Triple pole and earth enclosure with three pin and earth plug and socket including 1 Nos MCB Triple pole of capacity 32 Amps complete all as specified and directed by Engr-in-charge
Taking down carefully aluminium roof conductor including FRP insulators after unscrewing nuts & bolts with washers complete & Supply & fixing copper earth strip of size 20.0 x 3.15 mm with saddles/insulators and fixing screws etc .for roof conductors and down conductors above ground level including brazing complete all as specified and directed by Engr - in -Charge all as specified and directed by Engr - in -Charge
S&F Busbar supporting Insulator M10 Type for fixing of lightining arrestor connecting strip aluminium/ copper / GI strip on walls , building , roof of building fixing with screws and nut bolts all as per site requirement and all as directed by Emgr- In - Charge
M & L for Earthing complete with galvanised steel earth plate electrode 60cmx60cmx6mm thick burried directly in ground vertically to a depth not less than 2.25 metre below ground level with top edge of the earth plate at a depth not less than 1.5 M below ground level, earth plate surrounded by 15cm thick and packed with layers of charcoal dust and common salt , earth lead GI wire 4mm dia ( 8 SWG) connectd to GI earth plate elcectrode by means of bolts, nuts, check nuts and washers of galvanised iron and thimbles and other end of earth wire connected to main switch board and protected by galvanised iron pipe medium grade 15mm bore and 20mm bore light gradeGI pipe with funnel and wire mesh for watering including necessary excavation and earth works. PCC Chamber in cement concrete 1:3:6 type C-2 & RCC cover in M-20 (Design mix ) and all as shown in Electrical Plate No. 3 of SSR ( Part-I) of 2009.
Supply & laying in ground GI tubing light grade 40mm bore dia including necesary fittings for protecting earth continuity strip all as specified including takinf out old U/S pipe
S & F Display board (Earth pit marker) made out of 25 mm angular frame with 45 cm height one side welded with 2mm thick MS sheet, frame work of size 15cmx15cm including excavation , PCC foundation and duly painted with redoxide & two coats black enamel paint with following letter display with white paint earth pit marker. a) Earthing pit No:- b) Earthing resistance:- c) E-N volt:- d) Check done on:- e) Check due On:-
Varsha Enterprises (BID ID -3462311)
Pacific Enterprises (BID ID -3462373)
RAMSON TRADERS (BID ID -3462818)
M/S - KRUPA ELECTRICALS (BID ID -3465370)
EX SOLDIERS MECHANICAL WORKS (BID ID -3462079)
GKR and CO (BID ID -3462558)
Vishwas Enterprises (BID ID -3462064)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
TENDER.pdf
Tender Documents • 0.46 MB
BOQ_822308.xls
BOQ • 0.68 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .