Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹14.6 LAccepted-AOC | 1 | Accepted-AOC Accepted | |
| 2 | 2₹14.7 L+₹12,000 (0.82%)Rejected-AOC | 2 | Rejected-AOC Accepted | |
| 3 | 3₹15.0 L+₹35,399 (2.42%)Rejected-AOC | 3 | Rejected-AOC Accepted | |
| 4 | 4₹15.4 L+₹76,439 (5.23%)Rejected-AOC | 4 | Rejected-AOC Accepted |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
30 Oct 2019, 6:00 pmClosed
CO 52 Engr Regt
52 Engr Regt PIN 914052 c/o 99 APO
Proc of stores for chain link fence
2019_ARMY_288380_5
5752/QUO/2019-20/35/OPW
Limited
Miscellaneous Goods
Supply
60 days
Leimakhong
Please refer Tender documents.
3 documents required · 3 mandatory
₹0
₹30,000
Yes
12 Mar 2020
11 Oct 2019
31 Oct 2019
15 Oct 2019
30 Oct 2019
23 Oct 2019
STORES FOR SECURITY FENCE
Fine aggregate (Natural Sand) conforming to IS383-1978.
Graded stone aggregate 20mm conforming to IS383-1978.
Structural steel rolled angle iron section 65 x 65 x 6mm fencing post conforming to IS2062-1984, 3.75m long including fabrication of 0.75m long top portion for swan neck at 30 degree to vertical including making six round holes of 15mm dia on vertical posts for fixing of strut and four nos notches on the swan neck and welding of two nos of 16mm MS rod each of 0.20mtr length to bottom end of post for anchorage including one coat of red oxide primer and two coats of synthetic enamel paint for the exposed surface of angle above GL complete and two coats of bituminous paint to embedded portion of angle (0.60m), weight of each post shall be not less than 21.75 Kg. Make: TATA/SAIL/JINDAL
MS flat iron 40 x 6mm, 2.4 m long with holes of 15mm dia, all as per drg including one coat of red oxide primer and two coats of synthetic enamel paint. Make: TATA/SAIL/JINDAL
Mild Steel Round Bars 10mm Dia 3.15 Metre Long (includin hook at both ends 0.09m long), made to shape as shown in drawing including one coat of red oxide primer and two coats of synthetic enamel paint. Weight of Each Bar 1.94Kg Make - TATA / SAIL / ISI Marked
Galvanised steel Chain link fence fabric 2.4m wide, mesh size 100mm x 100mm (+/- 4mm) made of 4.00mm nominal diameter wire. Galvanized chain link shall be manufactured as per IS4826 Make: TATA/SAIL/JINDAL
Structural steel rolled angle iron section 65 x 65 x 6mm, 2.90m long conforming to IS2065-1984 including fabrication for strut bending at top portion including making three Nos holes of 15mm dia and welding 0.20 m long 16 mm dia MS rod at bottom for anchoring purpose including one coat of red oxide primer and two coats of synthetic enamel paint for exposed surfaces of angle above GL and two coats of bituminous paint on embedded portion of strut (0.55m below GL).weight of each Strut shall be not less than 16.82 Kg. Make: TATA/SAIL/JINDAL
Mild Steel bolts with hexagonal head at one end and screwed on the other end, fitted with one nut and two washers. The bolt shall be 12mm dia and 50mm long. Make: TATA/SAIL/JINDAL
Galvanised steel two strand barbed wire, 2.24mm dia meter of wire, 2mm dia wire barb at 75 mm spacing, conforming to IS:278 of 1978 (Third Revision) with amdt No 1 to 4. The points of barbs shall be sharp. The line and point wires shall be circular in section free from scales and other defects and shall be uniformly galvanized. The barbed wire shall be manufactured as per clause 11.2.1 and 11.2.2 respectively of IS specification cited above read with IS4826/79 (first revision). Make: TATA/SAIL/JINDAL
GI Binding wire 1.20mm dia.
M/S RANJAN ENTERPRISES
M/S SATISH THAKUR
RONAK SINGH
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .