Construction of New building for Tamil Nadu Police canteen with development works in Tiruppur District.

Amount

1.1 : Earth work excavation in all soils (including refilling) a. 0 to 2 mt.

13.1 : Filling with Excavated Earth

21.2 : Teak wood Wrought & Put up a. T.W. over 2 m & below 3 m

b. T.W. below 2 m length.

23.3 : S&F of Magnetic door catches

24 : Manufacturing & supply of steel windows (Weight basis)

25 : M.S.Holdfast

30 : Ellispattern

31 : Weathering course

39 : S & F of M.s Grills

40 : Painting - New "wood work"

41 : Painting - New "iron work"

45 :Stucco plastering

46 : S & F 20 mm dia Alu. Hanger Rod

47 : S & F Alu Towel rail 75 cm long

48 : S & F 5 pin Coat stand

49 : S & F chromium plated 8 guage Picture Hook

50.3: Supply and planting avenue trees

50.4 : Providing Tree guard

52 : PVC Water supply (ASTM) a. 32 mm dia

b. 25 mm dia

55.1 : Squat Urinal

55.2 : Flat Back Urinal

Electrical arrangements 69 : 15 Amp. Power plug

72 : Box type Fibre Fan hook

74 : Charges for fixing of "Fan"

76 : 8 SWG wire

78 :Earthing Station IS3043 (Type I)

81 : Meter cupboard

86 : Anti termite treatment

112. : S&F of 300 mm dia sweep AC exhaust fan

ANNEXURE-I 2.1.1 : Supplying and filling with Gravel ( including tax collected by the Govt)

2.1.3 : Filling crushed stone sand

3.1.1 : C.C.1:5:10 for Foundation & Basement (using crushed stone sand)

3.2.1 : P.C.C. 1:2:4 for Foundation & Basement and other similar works (using crushed stone sand)

6.2.1.1 : Brick work in C.M. 1:5 (F& B) with Admixture using Fly ash bricks of size 230x110x70mm in Foundation and Basement

8.2.1.1 : Standardised concrete Mix M25 Grade concrete. (using crushed stone sand) a) In Foundation and Basement.

b) In stilt / Ground Floor

c) In First Floor.

d) In Second Floor.

9.2.1.1: Brick work in Cement Mortar 1:6 (One of cement and six of Crushed stone sand) with Admixture using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground floor

b. In First Floor

c. In Second Floor

10.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 110mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² in the following floors a. In Foundation and Basement

b.In Stilt / Ground Floor

c. In First Floor

11.2.1.1 : Brick partition wall in Cement Mortar 1:4 (One of cement and four of Crushed stone sand with Admixture) 70mm thick for super structure in the following floors using Fly ash bricks of size 230x110x70mm having the compressive strength of not less than 100 Kg/CM² for superstructure in the following floors a. In Stilt / Ground Floor

b. In First Floor

14.1.1.I : Precast Cupboard slab 20mm tk using standardised concrete mix M20 grade.(using crushed stone sand) a. In Stilt / Ground Floor

b. In First Floor

14.1.1.II : Precast Cupboard slab 40mm tk using standardised concrete mix M20 grade.(using crushed stone sand) b. In Stilt / Ground Floor

18.1 : Formwork using M.S.Sheet a.For Column footings,plinth beam,Grade beam,Raftbeam,Raft slab etc.,

b.Plain surfaces such as Roof slab,floorslab,Beams,lintels,lofts,sill slab,staircase,portico slab and other similar works

c.For Square and rectangular columns and small quantities

21.5.1.1 : Supply and fixing of Solid core flush door shutter of thickness 35mm a) door size 0.900 X 2.100 m (Single leaf)

21.5.1.2 : Supply and fixing og Solid core flush door shutter of thickness 32mm b) door size 1.5 X 2.40 m (Double leaf)

23.2.1 : 4mm thick plain Glass panels with Aluminium beedings

26.1 : Flooring in C.C.1:5:10 (using crushed stone sand)

28.1 : Floor plastering in C.M. 1:4, 20 mm tk. (using crushed stone sand) including plasticizer

29.8.1 : Glazed tiles using Grout (Tile Joint Filler) (using crushed stone sand)

29.9.1 : Floor ceramic tiles using Grout (Tile Joint Filler) (antiskid) (using crushed stone sand)

32.1.1: Finishing top of roof with one course of Hydraulic Pressed Tiles of approved superior quality of size 23cmx23cmx 16 to 18mm thick laid over weathering course in cm 1:3 (One of cement and three of crushed stone sand) 12mm thick mixed with Water proofing compound at 2%

33.1 : Plastering in C.M. 1:5, 12 mm tk. (using crushed stone sand) including plasticizer

34.1 : Plastering in C.M. 1:4, 12 mm tk.(using crushed stone sand) including plasticizer

35.1.1 : Plastering in CM 1:3, 12mm with WPC (using crushed stone sand) including plasticizer

35.1.2 : Spl. Ceiling plastering in C.M. 1:3, 10 mm tk. (using crushed stone sand) using plasticizer

36.1 : Cement mortar Border in C.M. 1:5, 12 mm tk. (using crushed stone sand) a. 150 mm wide

b. 75 mm wide

c. 50 mm wide

38.7 : Painting with two coat of Plastic Emulsion PAINT including primer for inner walls

38.7.1 : Painting with two coat of Exterior Emulsion PAINT including primer for outer walls

43.1 : Supply & Fabrication of Mild steel / RTS grills (without cement slurry) for all sizes of rods.

44.2.1: Rain water harvesting using defunct borewell and providing perforated cover slab (M20) a). Providing pit

b) Augering 30cm dia

44.6 : PVC SWR 110 mm dia with ISI mark type- A for Rain water down fall pipe

50.5.1 : Supplying. Fabricating and erection of M.S Scheme Name board (using crushed stone sand)

50.6.1 : Precast slab 50 mm tk.in C.C. 1:3:6 with fibre (using crushed stone sand)

52.4: 20mm dia PVC water supply ASTM pipe (fully consealed in walls)

53.4 : S&F of C.I Manhole cover 60 x 60 cm (50kg weight )

53.5.2 : Wash Hand Basin of size 550 x 400 mm (White without Pedestal)

54.1.1 : S & F of 15mm dia half turn CP long body tap

54.2.1 : S & F of 15mm dia half turn CP short body tap

56.3.1: S&F of Indian Water Closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR grade P' or "S' trap - In G.F.(using crushed stone sand)

57.1.1 : S & F of E.W.C (White) 500mm with PVC SWR grade "P" or "S" Trap (using crushed stone sand)

58.3 : PVC SWR pipe (Soil line) with ISI mark - type 'B'. a. 110 mm dia.

b. 75 mm dia.

58.4: Supplying, Laying & Concealing the 50mm dia PVC ( SWR) pipe with ISI mark type - 'B' with relevant specials.

59.2.1 : Gully Trap using chamber burnt bricks of size 23 x 11.4 x 7.5 cm (using crushed stone sand)

60.1 : PVC Nahani trap (4way/2way)

61.3 : UPVC Non Pressure pipe of SN8 SDR 34 (S 16.5) as per IS 15328/2003 a. 110 mm UPVC Non Pressure pipe

b. 160 mm UPVC Non Pressure pipe

64.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. a. Light point with ceiling rose

b. Light point without ceiling rose

c. Calling bell point with Buzzer/Calling bell

65.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Fan point

66.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point

67.1 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Switch Board Itself

68.2 : Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point @ Convenient Places

75.1.2. : Supply and delivery of 48" (1200 mm) Fan with ISI mark with Eletronic Dimmer

77.6 : Run of 2 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

77.7 : Run of 2 Wires of 2.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990.

90.1: Providing additional strutting to centering of plain surface.

98.3.2. : TW panelled door shutter (with brass fitting ) e. 1500 x 2400mm. (Double leaf)

344.2 : S&F of Bevelled edge mirror 500 x 400 x 5.5mm

361.1 : Concrete designer tiles flooring (using crushed stone sand)

361.5.1.: Supply & laying virtifed tile (ivory) flooring with tiles size 600 x 600 x 8mm for flooring and other similar works in cement mortar 1:3 (one of cement and three of CS sand) 20mm thick including pointing

379.4.2.2 : S & Laying of Granite slab of size 4'x2', 18 to 20mm thick for flooring (Grey) (using crushed stone sand)

448.2. : Providing PVC Tee with end cap

ANNEXURE - II A1:One coat of wall putty for new walls and other similar works.

A2: Supply & Fixing of WPC solid door frame extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55, and Bulk Density 800 Grms / Cub.Mt.. The frame shall be fixed onto the wall using 8 x 100mm long M.S fastener Screw fitted with polymeric nylon sleeve. A minimum of 4nos screws to be provided for each vertical member.Supply & Fixing of 25mm (+/- 1mm) thick Qute WPC Decora Door which is extruded as a single core door with Lead-Free compound. The door is designed homogeneously by Smooth Routing and 3D embossed grains on one side. The other side of the door shutter shall be plain mat finish. The door must be completely made by machine, without any post-production fabrication. The Solid WPC board shall have minimum Bulk Density 650 KG/ Cub.Mt. The door is suggested to be hinged to the frame with minimum of 5 inch butt hinges of SS make.

A3: Supplying & fixing of Stainless steel Hand Rails for Staircase

A4: HDPE water tank of following liters capacity with ISI mark b. 1000 lit

A5: Supply, laying, fixing and jointing the following dia UPVC pipes (Below Ground level) a. 32mm dia

b. 50mm dia

A6: Supplying and fixing of the following dia GI / GM specials a. 50mm dia GM Non Return Valve

b.32mm dia GM Gate Value

A7 : Supplying and fixing of Angle cock with fittings

A8 : S & F of 15mm dia CP Two way tap bib cock with health faucet

A9 : Supply and fixing of CP shower with shower arm

A10 : CP Wall Mixture Tap 3 in 1 system with Hand Showers

A11:Supply,delivery and fixing of following size SFRC manhole cover with frame with locking arrangement a)600mm X 600mm

A12: Supply and fixing of 9 watts LED bulb

A13: Supply and fixing of 4' 18 watts LED Tube Light

A14: Supply and fixing of Bulk Head fitting suitable for 12W LED Bulb

A15: Supplying and fixing of 25W LED street light fittings etc.,

A16:Supply and fixing of 12 watt LED bulb

A17 : Run of 4 x 6 Sq mm copper PVC insulated single core cable

A18: Supplying and fixing of following size of TNPHC Emblem & Aluminium Dye casting letters a)18" Height TNPHC Emblem

b) 12" dia Aluminium Dye casting letters

c) 9" dia Aluminium Dye casting letters

A19: Supply and fixing of 24"x8" plastic foam name plate with vinyl cutting letter RWH Board

A20:Supplying of 6 lever Navatal lock with 3 keys with ISI mark etc.,

A21: Supply and Fixing of GALVANIUM SHEET 0.47MM THICK

AADHIINFRAPROJECTS (BID ID -1497131)

KAVITHA BUILDERS (BID ID -1496136)