Item 3 Construction of LIG 155 Nos. Flats G plus 12 Under CMJAY Scheme Block B1 At Sector 26 Pratap Nagar Jaipur

Amount

Providing & Laying autoclave aerated blocks masonry with 150mm/230mm/300mm thick AAC Blocks of Grade-I Conforming to IS:2185 Part:III in superstructure above plinth level with polymer modified adhesive mortar as per direction of Engineer in Charge.

Providing & Laying autoclave aerated blocks masonry with 100mm thick AAC Blocks of Grade-I Conforming to IS:2185 Part:III in superstructure above plinth level with cement mortar 1:4 (1 cement: 4 coarse sand) .The rates includes providing and placing in

Supplying , installation , Testing and commissioning of the passenger / goods / Stretcher or Bed elevator having following main features:

(a)MOTOR : Gearless lift drive comprising of high starting torque lift duty , 3 phase 440 Volts A.C. permanent magnetic synchronous motor of proper rating with high efficiency shall be used.

( c ) Traction Media: main hoist flat coated steel belt / rope . Thimbles of spring permit adjustment of uniform tension for smooth operation of the elevator Pulse belt monitoring system to avoid the cut in the belt.

(d) Car : car should be with M S platform with bracings of adquate size and to sustain the impact load cabin plus passengers with safety factor of fire for steel withAnti skid PVC flooring and side panels should be of Stainless steel with hair line finish of sheet of grade 304 duty with S.S. handrails . Car ceiling shall be steel finish with aesthetic appearances with LED ceiling lights .The size of the car shall be taken as per available lift well size and relevant BIS code of lifts . Car panel will also be of S S 304 grade finished with emergency stop device , emergency alarm,mechanical door safety device ,full length infra-red curtain in car door , facility of auto/attended mode . All car panel buttons and all floor switches must be with brail language as per lift act. Agency shall also provide & install one No. 2 MP , IR , IP based ceiling mounted Dome Camerain the car complete with connecting cables & accessories (To be connected with existing CCTV system in the Building) .The inspection unit shall be provided at the top of the car.

(e)Landing Doors : All landing door shall be fully automatic centre opening / telescopic made of hair line finish stainless steel grade 304 with key holes and infrared curtains with unlocking facility from outside.

(f) Emergency light: Appropriate rechargeable battery operated LED emergency light in the car and along with alarm switch shall be provided.

(g) ARD: Automatic rescue Device (ARD) shall be provided according to passenger capacity with SMF batteries of approved brands as per BSR.

(h) Audio-Visual Indication : Audio visual indication in the lift car , showing over loading such that doors kept open till excess load is removed.

(i) Scrolling Indicators: Digital scrolling indicator system for up-down arrow with floor position indicator shall be provided inside the car and at all stops/floors.

(j) Buffers : Spring buffers/PU Buffers shall be provided.

(k) Car Fan : ENERGY EFFICIENT Car fan/blower with automatic sleep timer shall be provided.

(l) Voice Annunciator: Voice annunciator with suitable music shall be provided in lift car.

(m) Self diagnostics system for operational and safety parameters shall be provided in control panel .

(n) Mechanical/Electronic over speed governor , door key holes in the floor doors, fireman switch shall be provided .

(o) Lift machine hoisting arrangement in the lift machine room , counter balance to promote smooth and economic operation complete with steel guide rails for the car & counter weight ,Trap Door , Lifting hooks as required and monkey ladders for lift pit should be provided by the agency along with all other steel structure works , foundations for the machine etc as required.

(p) Permanent wiring in lift machine room and in lift well with providing and fixing of electrical distiribution board complete with SP & TP MCB's , proper numbers of light points, with LED fixtures , exhaust fan , 2 nos copper plate /chemical earthing with 8 SWG copper earth wire and plug points shall be provided by the agency . ( Power supply of 3 phase 440 V shall be made available by department in lift machine room .)

(q) All civil work related to installation of lift like finishing , cleaning and levelling of lift pit , white wash of lift well and in machine room shall be done by the lift erecting agency without any extra cost.

(r) Granite or marble cladding around all landing door openings shall be in the scope of lift installation agency and additional payment shall be made according to the actual measurement / schedule by the department to the lift agency.

( s) Agency has to provide all working drawings and documents to comply latest BIS specifications and make proper liasion services for obtaining all necessary permissions.

13 passengers/884 Kg , 13 stops , rated speed adjustable up to 1.0 mtr /sec with 2 years comprehensive maintenance / DLP .

Bidder Name

Amount

M/S Pradeep Kumar Jain(GSTN-08AEMPJ4519F1ZG)

SHRI BALAJI CONSTRUCTION(GSTN-08ADIFS6418D1Z0)

K G Construction(GSTN-08AAMPL1811A1Z7)

bhorilal mohanlal(GSTN-08AABFB2993G1ZG)

Anand Prime Const. Group(GSTN-NA)

K G Construction

bhorilal mohanlal

M/S Pradeep Kumar Jain

Anand Prime Const. Group

bhorilal mohanlal

SHRI BALAJI CONSTRUCTION

K G Construction

M/S Pradeep Kumar Jain