PROVN OF 1 X 20 MEN BARREK WITH TOILET BLOCK AT NORTH CAMP AND PROVN OF OF TOILET BLOCK 1 WC AND 03 URINALS AT SOUTH CAMP MFFR

Amount

Excavation in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etcor notexceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes,, etc and getting out in loose/soft soil complete all as specified and directed by Engr-in-Charge.

Returning, filling in excavated approved soil, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm each layer complete all as specified and directed by Engr-in-Charge.

Removing excavated soil not exceedind 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed by Engr-in-Charge.

S& F sand filling under floors or in foundation inxluding watering abd consolidations complete all as specified and directed by Engr-in-Charge.

M&L for broken stone Hardcore of gauge n. exc 63 mm, deposited, spread and levelled in layers n. exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate in foundations, filling and mass concrete including base of manholes complete all as specified and directed by Engr-in-Charge.

M&L for Brick work with fly ash bricks old size straight or curved on plan exceeding 6m mean radius built in CM 1:6 complete all as specified and as directed by Engr-In-Charge.

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm gaded stone aggregate as in sub base in floors and paving, laid in panels and finished even & fair complete all as specified and directed by Engr-in-Charge.

M&L 18-20 mm thick machine cut kota stone slab as in flooring, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 20mm thick screed bed in cement and sand mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

M&L 18-20 mm thick machine cut kota stone slab as in skirting/dado etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing over and including 10mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

M&L non skid ceramic tiles 7 to 8 mm thik (square/rectangular) area of each tile exceeding 0.06 sqm but exceeding 0.11 sqm n exc .18sqm , in floors on 15mm thick screeding in CM 1:6 set set and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on 10mm thick screeding in CM 1:4 complete all as specified and directed by Engr-in-Charge.

M&l Mild steel joist , channel, angle, tee section, fixed independently without connecting plates etc. including welding as necessary confirming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge.

M&L Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St-240, conforming to Fe- 290 Gde E-165 complete as directed by Engineer-in-Charge and all as specified.

M&L Mild Steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-290 Gde E-165 complete all as specified and directed by Engr-in-Charge. as specified and as directed by Engineer-in-Charge.

M&L Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exceeding 5 cm and dia of shank 5 to 10 mm complete all as specified and as directed by Engineer-in-Charge.

M&L MS work as in framed work such as grills, gratting, guard bars, etc confirming to Fe-410-0 complete all as specified and directed by Engr-in-Charge.

S & F Pre-painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of sand colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S & F Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of sand colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as Sand Colour complete all as specified and directed by Engr-in-Charge.

Supply and fixing anodized snap grid frame work of size 605mm x 605 mm for false ceiling including necessary notching. The snap grid shall consist of anodized aluminium main & cross tee of size 36.5 x 25 x 1.4 mm weighing 0.24 Kg/RM and 23.5 x 26.4 x 1.40 mm weighing 0.191 Kg/RM respectively. The main and cross tee shall be jointed at junction crossing with anodized aluminum angle bracket of size 15mm x 15mm x 1.5 mm weighing 0.12 Kg/RM fixed with suitable MS bolts, nuts and washer. The snap grid (main/cross tee section) shall be supported at ends all along the wall with anodized aluminum angle of size 35 x 25 x 2 mm weighing 0.36 Kg/RM fixed to wall with suitable arrangement and providing 12 mm thick mineral fibre board fixed in grid support with 2.50 mm dia plain mild steel wire galvanised class 3 fixed in detached works etc to support snap grid, made of aluminum as per specification and providing two coats of synthetic enamel paint over a coat of pink primer including preparation to exposed surfaces complete all as specified and as directed by Engineer-in-Charge.Make of mineral fibre Board : Armstrong Ceiling Tiles.

M&L Roughly squared stone lintels hammer dressed on face and soffits, hoisted, set and pointed in cement mortor 1:6 n.exc 3 m in length complete all as specified and as directed by Engineer-in-Charge.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. With glazing bar dovtailed or welded including one shop coat of primer complete all as specified and directed by Engr-in-Charge.

S&F Steel window with side hung shutter incl.box type hinges with steel handle of MS flat 25x5mm and 2nos tower bolt of 100mm long fixed to shutter comp. Without glazing bar dovtailed or welded including one shop coat of primer complete all as specified and directed by Engr-in-Charge.

S&F factory made solid panel PVC door shutter with MS square tube 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC sheet stirip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top,lock and bottom rail on either side & as gap insert for top rail & bottom rail .panelling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement S&F in the steel frame at site as per specification complete all as specified and directed by Engr-in-Charge.

S&F Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate of profile 105x60mm complete all as specified and directed by Engr-in-Charge.

S&F Pressed steel frames for door with one or more rebates including necessary fixing lugs, hinges,lock strike plate of profile 125x60mm complete all as specified and directed by Engr-in-Charge.

S&F Steel ventilators with top hung shutter including hinges, steel peg stay complete all as specified and directed by Engr-in-Charge.

M&l MS work as in hold hast complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 35mm thick Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers complete all as specified and directed by Engr-in-Charge.

S&F 2nd class hard wood 35mm thick Plain, framed, Glazed shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood partcile board with commercial face veneers complete all as specified and directed by Engr-in-Charge.

M&L for painting to new wooden surface over 10cm width or girth with two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F 100mm lomg butt hinges, cold rolled mild steel medium weight complete all as specified and directed by Engr-in-Charge.

S&F Aluminium alloy, anodised, sliding door bolt 300 mm long, with haps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engr-in-Charge.

S&F Aluminium anodised barrel tower bolts of extruded section, 150 mm long complete all as specified and directed by Engr-in-Charge.

S&F Extruded aluminium alloy handles, fabricated type, anodised, 150 mm size complete all as specified and directed by Engr-in-Charge.

S& F Harrison rails,mild steel,curtain rod chromium plated with fixing brackets, stops, rollers complete all as specified and directed by Engr-in-Charge.

M&l PCC 1:3:6 type B-1 using 20mm graded aggregate as in bed blocks of hold fasts complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick Rendering in cement mortar 1: 4 on fair faces of brick work or concrete surfaces, finished fair and even without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick Rendering in cement mortar 1: 6on fair faces of brick work or concrete surfaces, finished fair and even complete all as specified and directed by Engr-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of oil Bound Distemper white or tinted over a coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for Preparing new plastered or unplastered surfaces of walls and applying two coats of cement paint white or tinted over a coat of white wash complete all as specified and directed by Engr-in-Charge.

S&F 3mm sheet glass, ordinary quality and glazing with oil putty in squre n exc 0.5sqm in each pane but forsted complete all as specified and directed by Engr-in-Charge.

S&F stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm, fixed with tinned tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge.

M&L for preparation new or previous untreated steel & iron surfaces of any description over 10cm in with or grith and applying two coats of synthetic enamel paid over & including a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.

M&L 5cm thick sand stone slabs in shelves, chajjas, shelves etc n exc 2m in length set and pinted in CM 1:4 complete all as specified and directed by Engr-in-Charge.

S&F PVC low level flushing cistern 10 litres capacity, white, with all fitting and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china EWC (Pedestal pattern), white,(excluding flushing cistern and flush pipe), with CI ‘P’ trap of long arm of suitable size including connection to flush pipe, anti symphonic pipes complete all as specified and directed by Engr-in-Charge.

S&F in repair, white, vitreous china WC squatting pan, Orissa pattern 580mmx440mm size with integral foot rest, and connection to flush pipe/trap and connection to anti syphonage pipe etc. including making good to floor as per existing specifications complete all as specified and directed by Engineer-in-Charge.

S&F in replacement Spray jet chromium plated with and including 1.5 metre long PVC flexible reinforced pipe and CP brass nuts,for bore of pipe 15 mm suitable for EWC complete all as specified and directed by Engr-in-Charge.

S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (Minimum weight 190 gms) complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china bowl urinal Haif stalf type, white, with grating and union for discharge pipe including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, including providing & fixing 5 litres cast iron automatic flushing cistern with brackets, 32 mm bore PVC waste pipe and 25 mm bore light grade GI flush pipe complete all as specified and directed by Engr-in-Charge.

S&F Vitreous china wash basin, white, flat back, size 550 x 400mm, including brackets and cutting for and pinning in ends of brackets, and including waste Pipe and waste Coupling complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) pipes, single socketed,in any length with rubber ring joints, fixed to walls, 75mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) bends any radius, 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) branch pieces, single (single Y) equal or uneqal, 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) couplers, 110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) 'P' trap, 125/110mm bore complete all as specified and directed by Engr-in-Charge.

S&F PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75 mm complete all as specified and directed by Engr-in-Charge.

M&L for 15mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete all as specified and directed by Engr-in-Charge.

M&L for 20mm bore steel water tubes, medium grade. ISI marked, galvanised with all fittings, fixed to walls and ceilling or laid in floors complete all as specified and directed by Engr-in-Charge.

S&F angle valves, cast copper alloy, cp fancy type screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F Angle valve , cast copper alloy, screwed down, high pressure, with crutch or butter fly handle, fancy type, chromium plated, with long shank and cup (concealed type) screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F Rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of 2000 litres capacity, hoisted and fixed in position including connecting up pipes complete all as specified and directed by Engr-in-Charge.

S&F Bib taps cast copper alloy Chromium Plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F pillar tapes, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore (Minimum weight 210 gms) complete all as specified and directed by Engr-in-Charge.

S&F waste fittings 32 mm bore, brass, chromium plate for glazed ware sinks, basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed by Engr-in-Charge.

PTMT shower rose with swivel joints 75mm size complete all as specified and directed by Engr-in-Charge.

S&F Tower Rail 600 mm long of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms) complete all as specified and directed by Engr-in-Charge.

S&F PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed by Engr-in-Charge.

M&L Cement concrete (1:4:8) type D-2 using 40 mm graded stone aggregate as in packing under and hunching against the sides of pipes, without bedding layer, after they are laid and tested in 150 mm dia of pipe complete all as specified and directed by Engr-in-Charge.

M&L Salt glazed stone were drain pipes, grade ‘A’ 150 mm bore (internal dia) laid in trenches over existing concrete bedding and jointed complete all as specified and directed by Engr-in-Charge.

M&L for 75mm thick Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, , finished even and smooth using extra cement , laid in panels including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete all as specified and directed by Engr-in-Charge.

M & L Green Marble work 20 to 25mm thick (table rubbed and polished) in steps, jambs, pillars, for Patition , windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed by Engr-in-Charge.

M&L Precast reinforced cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cover slabs (for manholes etc), shelves and similar articles with plain faces including necessary moulds and setting in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. (reinforcement to be measured separately)

M&L for Mild steel TMT bars 10mm dia and over as reinforcement for concrete, cut to length, bent to shape required, including cranking, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engr-in-Charge.

M&L Soakage wells with excavation in any type of Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/RR Masonry/ Filling with brick bats complete of size 1.8 M dia X 4.5 M deep complete all as specified and shown on TD drgs. and directed by Engr-in-Charge.

M&L Soakage wells with excavation in any type of Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in CM, RCC cover slab in M-25/RR Masonry/ Filling with brick bats complete of size 2.4 M dia X 4.5 M deep complete all as specified and shown on TD drgs. and directed by Engr-in-Charge.

Material and labour for Point wiring One light point/fan/Exhaust fan point controlled by one switch complete with stranded copper conductor 1.5 sqmm size , FLRS insulated and unsheathed cable , 1100 V grade drawn in medium grade concealed PVC conduit not less than 1.6 mm thick factory made and factory painted with top coover 3 mm thick bakelite laminated sheet fixed MS sunk box with brass screw and washer all assessories including single core stranded copper conductor 1.5 mm Sqmm size FLRS insulated unsheathed cable wire to common earth dolly drawn in same conduit complete all as specified and directed by Engr-in-Charge.

Material and labour for Point wiring for one 5 Amps switch socket outlet point on same board with other switches complete with stranded copper conductor 1.5 sqmm size , FLRS insulated and unsheathed cable , 1100 V grade drawn in medium grade concealed PVC conduit not less than 1.6 mm thick factory made and factory painted with top coover 3 mm thick bakelite laminated sheet fixed MS sunk box with brass screw and washer all assessories including single core stranded copper conductor 1.5 mm Sqmm size FLRS insulated unsheathed cable wire to common earth dolly drawn in same conduit complete all as specified and directed by Engr-in-Charge.

Material and labour forPoint wiring for one 5 Amps switch socket outlet point on an independent board complete with stranded copper conductor 1.5 sqmm size , FLRS insulated and unsheathed cable , 1100 V grade drawn in medium grade concealed PVC conduit not less than 1.6 mm thick factory made and factory painted with top coover 3 mm thick bakelite laminated sheet fixed MS sunk box with brass screw and washer all assessories including single core stranded copper conductor 1.5 mm Sqmm size FLRS insulated unsheathed cable wire to common earth dolly drawn in same conduit complete all as specified and directed by Engr-in-Charge.

-- Ditto-- All as per item No. 82 above but 4.00 Sqmm copper conductor cable for socket outlet 3/6 pin, 15 Amps with 2.5 sqmm copper conductor cable as earth wire complete all as specified and directed by Engr-in-Charge.

S&F Switch piano flush type single pole, one way 5 Amps complete all as specified and directed by Engr-in-Charge.

S&F for socket outlet 3/ 5 Amps, 5 Pin flush type complete all as specified and directed by Engr-in-Charge.

S&F Switch piano flush type single pole, one way 15 Amps complete all as specified and directed by Engr-in-Charge.

S&F for socket outlet 2 in 1, 3 Pin 5 & 15 Amps, 230 complete all as specified and directed by Engr-in-Charge.

M&L for Ceiling rose surface bakelite 63.5 x 20 mm, three terminals complete all as specified and directed by Engr -in- Charge

Supply and fix PVC angle holder with LED bulb of capacity 15 watt complete all as specified and directed by Engr-in-Charge. Make :- C&S/Havells Cat pt No.LTHPLEDLAMP5W/B22

Supply and fix electronic step type (1-4), socket type 240 volt AC supply with frame complete all as specified and directed by Engr-in-Charge.

S & F LED tube light fittings 20W LED 6000K (4 ft.) wall mounted LED batten, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic dirver etc, complete with all accessorie as specified and directed by Engr-in-Charge. Make:- Havells Cat pt No LHFKAWN7UC8W024/C&S Cat pt No LTDC01220WLED/WD 20W

Supply & fixing ceiling fan 1200 mm sweep and connecting up including three core PVC insulated multi stranded copper conductor cable of size 1.5 Sqmm wire from ceiling rose/connector to fan of length not less than 1.0 meter complete all as specified and directed by Engr-in-Charge. Make: Havells/Usha/Orient

Supply and fix MCB DBs 8 way SPN 230 Volt single door complete complete all as specified and directed by Engr-in-Charge. Make :- Havells/Indo Asian/SKF

Supply and fix Isolator SPN of capacity 40 Amp 230 Volt complete all as specified and directed by Engr-in-Charge. Make :- Havells/Indo Asian/XPRO

Supply and fix MCB SP ' C' series of capacity 6-32 Amp 240 Volt complete all as specified and directed by Engr-in-Charge. Make :- Havells/Indo Asian/XPRO

S& F bulk head luminaries suitable for LED light 1 x 9 watt with plastic enclosures and opal acrylic diffuser, including LED lamp complete including making connection with suitable size copper flexible wire complete all as specified and directed by Engr-in-Charge.

Material and labour for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 meter below normal ground level (with top edge of earth plate not less than 1.5 meter below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead ) by means of galvanized bolts, nuts and washers all as shown in electrical plate no 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe light grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia light grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B1 with 3 Nos 6 mm dia MS bars both ways complete all as specified & directed by Engineer-in-Charge.

M/S Shree Ram Enterprises

shubham enterprises

Aggarwal brothers and company