Request for Proposal of Appointment of Agency for Development and Beautification of Balkeshwar Park based on Shaivite Cultural Landscape

Excavation in foundation in ordinary soil (loam, clay, or sand) including lift upto 1.5 m and lead up to 30 m and including filling watering ramming of excavated earth in to the trenches or in to the space between the building and the sides of the foundation trenches or into the space between the building and the side of the foundation or in the plinth and removal & disposal of surplus earth as directed by E/I upto a distance of 30m.from the foundation trenches. Manual Work

Providing and laying cement concrete in 1:3:6 (1 Cement: 3 coarse sand :6 gladed stone aggregate 40 mm nominal size) and curing complete, lncluding cost of form work in Foundation and floors.

Providing and laying cement concrete in 1:1.5:3 (1 Cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) and curing complete, lncluding cost of form work. ln Foundation and floors

RCC work providing and laying in position specified grade of reinforced cement concrete, including the cost of centering, shuttering, finishing and excluding reinforcement - All work trp to plinth level : 1:1.5:3 (1 cement:1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) Ch-s SI No- 5,1.2

RCC work Providing and laying in position specified grade of reinforced cement concrete,Slab including the cost of centering, shutterang, finishing and excluding reinforcement - Above plinth level upto fifth floor lable : 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone

Reinforced cement concrete work in walls (any thickness), including attachedpilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abulments, posts and struts etc. including cost of centering, shuttering, finishing and excluding reinforcement:1:1.5:3 (1 cement: 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size) above plinth level and upto fifth loor lable

Class-150 (Non Modula0 brick work in 'l :3 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work.

Class-150 (Non Modular brick work in 'l :3 cement and Coarse sand mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work Add extra to ltem No. 1 to 4 above for super structure above plinth level upto floor five level including necessary cutting and moulding of brick work as required and also including honey combed brick work in thickness of wall more than12cm.

15 mm Cement plaster with cement mortar in proportion of 1:3 cement &.coarse sand of single coat for exterior plastering upto floor two level including internal rounded angles chamfers, and rounded angles not exceeding 80mm. ln girth and finished even and smooth.

12mm cement plaster with cement mortar in proportion of 'l:4 cement & coarse sand of single coat for interior plastering upto flool two level including internal rounded angles chamfers, and rounded angles not exceedlng 80mm. ln girth and finished even and smooth

Black Granite (Polished) in big slab 18mm thick

Providing and laying Ceramic non skid floor tiles of size 300x3OO mm (thickness to be specified by the manufacturer) of 1st quality conforming tq lS : 15622 of approved make in colours such as White, lvory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the ioints with white cement and matching pigment etc., complete.

Providing and laying Vitrified tiles in 500x500mm sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to lS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to lS: 15477, in average 6 mm thickness, including grouting ofjoints (Payment for grouting ofjoints to be made separately).

White Washing with lime on undecorated wall surfaces (Three or more coats) to give an even shade including thoroughly brooming the surface to remove all dirt, dust mortar drop and loose scales of lime wash and other foreign matter

Construction of Granular Sub-Base by providing course graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with vibratory roller to achieve the desired density as per more specification clause number 401 complete in all respects. (A.R)

Precast Concrete Grass Paver Type I Size: 300 MM (Width) x 300 MM (Length) x 60 MM (Thickness) Concrete Grade: M 30 at INR 950 per sqm

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm lvl.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineerin-Charge.

Providing and Fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x '19 mm for styles and 15x1 5 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufa.ture M S frame covered with 5 mm thick heat moulded PV')'C'channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shatl be tapered on both sides to form lock rail. and lock rails shall be provided both side of the panel, 10 mm (5 mm x 2 ) thick,20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mmr2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. Top, bottom and lock rails shall be provided both sides of the panel. 1O mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the l\4 S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge manufacturer's specification & drawing.

Brick Ballast

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work 50 mm nominal outer dia. Pipes.

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.

Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : Range of two urinal basins with 5 litre white P.V.C. automatic flushing cistern

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Main Panel and distribution box: Distribution equipment shall be outdoor type (IP 55), as applicable, and shall be painted in accordance with other equipment within the same area of mounting or painted to suit the ambience. The components inside these distribution equipments shall be of reputed make and the quantities shall be such that there is at least 10% redundancy on the main equipment. Outgoing terminals of the main distribution board shall be of heavy duty while the incoming / outgoing terminals of all other distribution equipment shall be screw less terminals of high standard. Distribution Boxes Junction shall be IP 55 made out of 2 mm thick MS sheet powder coated with screw less clip-+-on terminals / or else specified and double compression glands complete as required or as specified. Cubical panel shall be fabricated out from Cold rolled close annealed (CRCA) sheet with required bracings and supports, gasket with foam rubber to make the panel dust and vermin proof, together with degreasing and applying two coats of red oxide and two coats and stove enamel paint. The main panel thickness of steel sheets shall be 16 SWG. (Customised) the specification are as under : 300Amp copper bus bars, and including the following: RYB Phase Indicator, Amp and Volt meter complete in all respect with following accessories etc as required Main Incoming : 200Amp. 36kA, FP MCCB - 1No. Main Outgoing : 63Amp 16kA, 4P MCCB- 5 Nos. Din bar mounting MCBs Outgoing : 32Amp DP 30mA ELCB/RCCB - 5 Nos. 5Amp. to 32Amp. rating, 240/415 V, 10kA, "C curve, - 20 Nos"

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 3.5C X 70 sq. mm

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 3.5C X 35 sq. mm

Supply and laying of Copper conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 4C X 4 sq. mm

Supply and laying of Copper conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer- Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 3C X 2.5 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C X 70 sq. mm

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5C X 35 sq. mm

Supply and fixing of ring or pin type lugs to the cable leads as required, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer-Incharge. 4 sq. mm Copper

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required., 63 mm dia (CD-63 mm & ID-51 mm nominal)

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc. complete as required., 90 mm dia (CD-90 mm & ID-76 mm nominal)

Earthing with G.I. earth pipe 4.5 Meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Supplying, erecting, testing and commissioning outdoor duty floor mounted weather proof IP66 feeder pillar fabricated as detailed above but with double door (lockable outer door), sloping roof, water run-off gutter on three sides as per approved drawing, entire unit mounted on 50mm x 50mm x 6mm angle iron with minimum 300mm long ""legs"":" Feeder Pillar 1 Incomer: 1nos 63A TPN MCB 2 set of three phase indicating lamps with suitable protection. "Busbar: Equally sized three phase and neutral copper conductors busbar suitably sized to carry 100A current and suitably insulated with colour coded Heat Shrink Sleeve." Outgoings: 2nos 25A TP Contactor each with set of 6nos 10A SPN MCBs 2nos 24 Hour Timer with auxiliary contacts to close above contactor. 4nos 10A TP MCB

Installation, testing and commissioning of 40W RGB/WW Source Wash Light with the Following Specification : Max Power - 40W, Voltage - AC100~240V, Minimum Light efficiency (lm/W) > 45 lm/w, Standard Optical System - 12°/30°/45°/60°/12*50°/15*50°, LED Colour Temperature : 3200K , Operating Temperature : - 10°C~+50°C Fast Colour Pickup - 24 In- Built Presets, Impact Projection - IK10, Ingress Protection - IP67, Protocol - DMX + RDM (LBT/ALT/Vak)

Supply, Installation, Testing and Commissioning of sqsquare /round pillar 10 W LED Bollard Light with mounting base accessories having LED operating life >50000 burning hours, Input Voltage range of 160V-260V, Working temperature -10deg - 60 deg C, colour temprature should be 3000K/4000K/6000K, Good Thermal management System with inbuilt drivers. Corrosion resistant aluminum cast housing and Ingress Protection IP66. (LBT/ALT/Vak)

Seaforthia Palm having ht. 1.50 m to 1.80 m with 12-15 suckers, well developed, fresh and healthy lush green leaves from bottom to top in 30 cm size of Earthen pot / Plastic pot.

Providing and stacking of Ficus nuda of height 150-165 cm., bushy with healthy branches and lush green foliage in big size HDPE bags as per direction of the officer-in-charge.

Providing and stacking of Ficus religiosa (Peepal) of height 150-165 cm. in big poly bags of size 30 cm as per direction of the officer-in-charge.

Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.

Providing and stacking of Passiflora caerulea (Rakhi bel) of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge

Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.

Providing & laying Of grass & hedges with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge

SITC of Sprinkler system with suitable HDPE / uPVC pipes with brass nozzles and allied accessories, complete in all aspects

Design, supply, fabrication, installation, testing and commissioning of sculptural water feature with Lord Shiva, central seated Lord Shiva statue with integrated fountain, of approximate overall height 3.5–4.0 m excluding pedestal, fabricated in FRP with bronze-finish over MS internal armature, installed within an existing circular water basin complete in all respects as per approved drawings.

Design, supply, fabrication, installation and commissioning of artistically carved narrative wall sculptures depicting Lord Shiva’s cosmic episodes, sculptural wall panels with niche frames, each of approximate overall size minimum 3.0 m height × 2.5 m width × 0.6 m depth, featuring FRP high-relief carvings illustrating themes such as Ganga Descent, Tandava, Ardhanarishvara, Kiratarjuna and Kailasha episodes, executed in FRP stone-finish material over MS support framework, complete with detailed sculptural work, surface texturing, heritage finish, protective coating, identification plaques, pedestal fixing, alignment and safety provisions.

Design, supply, fabrication, installation and commissioning of “Shiva: The Many Facets” thematic sculpture zone, curated open-lawn installation of six Lord Shiva sculptures of approx. 12 ft (3.6 m) height each, representing different dimensions of Shiva—Adi Yogi, Nataraja, Ardhanarishvara, Neelkanth, Pashupati and Mahakaal, fabricated in bronze-finish FRP over MS internal armature, mounted on individual pedestals, arranged in a clear, walkable layout to create an accessible and contemplative public experience, including sculpture fabrication, detailed artistry, heritage surface finish, protective coating, pedestal fixing, alignment and safety provisions complete in all respects as per approved drawings, artistic intent and site conditions.

Design, supply, transportation, installation and commissioning of prefabricated food stall / kiosk, multi-bay modular structure of approximateapprox size 6.0–7.5 m length × 2.4–3.0 m width × 2.6–2.8 m height, fabricated with MS structural frame and profiled GI / PPGI / insulated sandwich panels, complete with service counter shutters, display openings, internal shelving/work platform, ventilation louvers, electrical wiring with LED lighting, power points, exhaust provision, weatherproof roofing, skid-mounted base, exterior-grade paint finish and signage space, suitable for outdoor public areas, including all fittings, fasteners, lifting, placement and commissioning.

Design, supply, fabrication and installation of gazebo, approx. 4.0 m × 3.0 m, comprising MS structure with wood-finish vertical slats, flat roof with exterior-grade finish, integrated seating bench, complete with fixing, finishing and accessories,

Supply, installation & commissioning (SIC) of falling water from Lord Shiva’s jata and Ball Fountain

Design, supply, fabrication and installation of manifestations of Lord Shiva through sculpture arrangement, comprising multiple seated miniature statues (approx. 0.9–1.2 m height each) depicting Ashta Bhairava and Ashta Rudra mounted on individual pedestals and arranged radially around an existing fountain / water feature, fabricated in FRP / GRC material, complete with surface finishing, fixing, alignment and accessories.

Design, supply, fabrication, installation and commissioning of directional signages for park, comprising freestanding / pole-mounted / wall-mounted signboards indicating pathways, facilities and zones, made of MS / GI structure with ACP / aluminium / acrylic panels, bilingual text and pictograms, weather-resistant vinyl / laser-cut lettering, exterior-grade paint or powder-coated finish, complete with fixing, alignment and accessories, excluding civil foundation

SITC of a rugged outdoor speaker in army green with an IP56 rating. It should be operated at 8 ohms and 100 volts with taps for 2, 4, 8, 16 and 32 watts and should be equipped with a 5.25" woofer or Bigger and 1" tweeter or bigger.It should achieve a sound pressure level of 86 dB at 1 W / 1 m with a power capacity of 40 watts of continuous power. Approved Make : LD Systems / Das Audio / Tannoy / Genlec

SITC of Amplifiers for the Garden Speakers : 4x 500W @ 4 ohms / 2x 1000 at 100V with full matrix DSP & built in wifi / web browser control, speaker presets, Control system API drivers. Approved Make - DAS Audio Spain / LD Systems / Mackie / AMPLIFYX

Supplying, installation Testing and Commissioning of 2C x 4 sq mm Copper Speaker Cable in PVC Conduit of specified make, complete with all accessories etc complete as as per the attached approved make list and with proper connections etc complete as required. (Audio Cable: Krystal/D-Link/Belden/Rellison

Supplying, installation Testing and Commissioningof 2 x 2.5 sq mm Copper Speaker Cable in PVCConduit of specified make, complete as per the attached approved make list and with proper connections etc complete as required. (Audio Cable: Krystal/D-Link/Belden/Rellison

Supply, Installation, testing and commissioning of Speaker cage made of SS Jali for theft protection.

Supply, Installation, testing and commissioning of PoE Ethernet Controller with minimum 8 programmable button and Volume Control, dual-gang US Decora or dual-gang EU form factor, push/rotary encoder, encoder ring, with sleep functionality, support minimum 2 LCD screen having 64x128 pixels screen resolution, Configured within Audio Architect via drag-and-drop, power consumption 300mA max at 48VDC with VW-1 Rated. (JBL/Bose/TW Audio/L Aucostic)

Sub Total (A)

Add / Deduction For Estimate Figure Amount Match

Grand Total