Repair Maint of fans (Ceiling Fans Exhaust fans Wall fans table fans Geysers Solar water heaters) under GE (N) Ahmednagar

Amount

Notes for Sl Item No 2, 18, 29 & 32 (i) Contractor has to take the complaint at MES power house (E/M) from Concern JE E/M Daily (Except Sunday & holiday). (ii) Contrcator shall attend the complaint within 24 Hrs after recived from JE E/M. (iii) Contrctor shall provide the Mobile Number so that massges can be send on the same mobile No. (iv) For non collection of complaits from JE E/M panel recovery @ Rs.500/- per day per complaint will be charged. (v) For Non attendence of complaints in 24 Hrs panel recovery @ Rs.200/- per day per complaint will be charged (vi) Contractor shall return the complaint slip as a token of completion duly signed from the user with time & date.

Taking out/down and opening of existing ceiling fans 1200 mm sweep,from any position, of any make etc & refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material/items,making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 m length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge Note:- (i) The connected items required like capacitor,Bearings,Bush, Canopy,down rods etc will be measured and paid sperately under respective items of this BOQ

Opening of ceiling fans of 1200 mm sweep, of any make etc in the store yard of AGE E/M , removing burnt out defective unserviceable winding & rewinding with approopriate size of super enamelled copper wire including applying super enamelled varnishing over winding , drying etc , reassembling and fixing after repair /replacement of spare parts/ material/items at the desired location including making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 m length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, clamps, washers etc including cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge Note:- (i) Quotated rates include cost of transportation from AGE E/M Store to Worksp & Back. (ii) The connected items required like capacitor,Bearings,Bush, Canopy,down rods etc will be measured and paid sperately under respective items of tis BOQ

Supply & fixing in replacement Ball bearing No 6201 etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement Ball bearing No 6202 etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement capacitor 2.5 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of rubber reel, bolt, nut including pin etc complete all as specified and directed by Engineer-in-Charge

Supply and Fixing in replacement of electronic fan regulator electronic step up type, SP 230 volt suitable for 48/56 inches fans incl making necessary connections, to make it functional etc complete all as specified and directed by Engineer-in-Charge

S & F fan Regulator switch type- Dimmer on the existing phenolic laminated etc. as requirement single pole 240 volts grade 100 watts heavy duty ISI marked.

S & F Fan regulator 100 W with 360° rotation 2 module of Make Legard Cat No: 6759 64 or equvalent in makes mentioned in list of makes in Appendix `C' etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of conopy (top and bottom) of ceiling fan , of any sweep, any make etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of down rod 0.45 m long made out of 15 mm bore medium grade GI pipe with & including clamp, nuts , bolts, split pins , washers, threading etc and making connections to make it functional etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of down rod 0.60 m long made out of 15 mm bore medium grade GI pipe with & including clamp, nuts , bolts, split pins , washers, threading etc and making connections to make it functional etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of down rod 1.5 m long made out of 15 mm bore medium grade GI pipe with & including clamp, nuts , bolts, split pins , washers , threading etc and making connections to make it functional etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of down rod 3.00 m long made out of 15 mm bore medium grade GI pipe with & including clamp, nuts , bolts, split pins , washers , threading etc and making connections to make it functional etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of set of blades (set of three) made of aluminium suitable for 1200 mm sweep ceiling fans , of any tint, including provision of brass screws for fixing etc complete all as specified and directed by Engineer-in-Charge Make:- Bajaj/Crompton Greaves/Havells/Khetan

Material and labour for preperation of ceiling fans 1200 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting to required gloss with white synthetic enamel paint to complete body of fans and writing MES No with black paint etc complete all as specified and directed by Engineer-in-Charge

Taking down/out and Opening of existing exhaust fans of 300/450 mm sweep, of any make etc., refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material/items,making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 m length including using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, clamps, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge Note:- (i) The connected items required like capacitor,Bearings,Bush, etc will be measured and paid sperately under respective items of this BOQ

Taking out and Opening of existing exhaust fans 300 mm size, of any make etc from the store yard of AGE E/M , removing burnt out defective unserviceable winding & rewinding with appropriate size of super enamelled copper wire including varnishing, drying etc , reassembling and fixing at the desired location after replacing items/ material including making connection by replacing PVC insulated unsheathed cable of copper conductor of size 1.50 Sqmm upto 0.50 Mtr length including using material/parts of minor nature such as screws, nuts, bolts, washers etc including cleaning the metal surface, lubricant/greasing etc to make it functional etc complete all as specified and directed by Engineer-in-Charge Note:- (i) Quotated rates include cost for transportation from AGE E/M Store to Worksp & Back. (ii) The connected items required like capacitor,Bearings,Bush, Canopy,down rods etc will be measured and paid sperately under respective items of this BOQ

All as per item No 19 above but of 450 mm size etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement capacitor 3.5 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge

Supply & fixing in replacement capacitor 4 mfd, 250 volts , AC etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement of set of blades made of aluminium suitable for 300 mm sweep exhaust fans, of any tint, including provision of brass screws for fixing etc complete all as specified and directed by Engineer-in-Charge Make:- Bajaj /Crompton Greaves/Havells/Khetan

Supply and fixing in replacement of set of blades made of aluminium suitable for 450 mm sweep exhaust fans, of any tint, including provision of brass screws for fixing etc complete all as specified and directed by Engineer-in-Charge Make:- Bajaj/Crompton Greaves/Havells/Khetan

Material and labour for preperation of exhaust fans 300 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting to required gloss with white synthetic enamel paint to complete body of fans and writing MES No with black paint etc complete all as specified and directed by Engineer-in-Charge

Material and labour for preperation of exhaust fans 450 mm sweep, of any make by cleaning of metal surfaces including painting with spray painting to required gloss with white synthetic enamel paint to complete body of fans and writing MES No with black paint etc complete all as specified and directed by Engineer-in-Charge

S & F Louver Shutter for Exhaust fan 450 mm including fixing with nuts,bolts etc including taking down existing unserviceable Shutters from Bldg at any height etc complete all as specified and directed by Engineer-in-Charge

S & F in replacement Louver Shutter for Exhaust fan 300 mm including taking down existing unserviceable Shutters at any height etc complete all as specified and directed by Engineer-in-Charge

Taking down/out carefully including opening of existing Padestal/wall mounted fans , upto 400/ 450 mm size/sweep, of any make etc from any location , refixing at the desired location after reassembling and after servicing/overhauling by thouroghly cleaning the shaft,rotor,stator and applying lubricant/grease to bearings and one coat of super enamelled varnish over winding to improve the insulation resistance including repair /replacement of spare parts/ material/items,making connection by using material/parts of minor nature such as screws, lugs, insulation tape, nuts, bolts, clamps, washers etc after cleaning the metal surface, greasing/lubricant etc to make it functional etc complete all as specified and directed by Engineer-in-Charge Note:- (i) The connected items required like capacitor,Bearings,Bush etc will be measured and paid sperately under respective items of this BOQ

Opening of existing Padestal/wall mounted fans , upto 400/ 450 mm size/sweep, of any make etc from the store yard of AGE E/M , removing burnt out defective unserviceable winding & rewinding with approopriate size of super enamelled copper wire including varnishing, drying, cleaning of bearing,shaft,stator,rotor etc , reassembling and fixing at the desired location including making connection to make it functional by using material/parts of minor nature such as screws, nuts, bolts, washers etc including cleaning ,greasing/lubricant etc complete all as specified and directed by Engineer-in-Charge Note:- (i) Quotated rates inclues cost for transportation from AGE E/M Store to Worksp & Back. (ii) The connected items required like capacitor,Bearings,Bush, Canopy,down rods etc will be measured and paid sperately under respective items of this BOQ

Supply and fixing in replacement of set of blades made of aluminium suitable for Table/ Air circulator fans, of any make, of tint as required including provision of brass screws for fixing etc complete all as specified and directed by Engineer-in-Charge Make:- Bajaj/Philips/CG/Havells/Khetan

Taking out/down carefully and opening of existing water Geysers of 25 Ltrs capacity,from any position, of any make etc & refixing after reassembling and after repair /replacement of spare parts/ material/items, at the desired location and making necessary water inlet, outlet & electric connections to make in functional by using material/parts of minor nature such as screws, insulation tape, nuts, bolts, washers etc including cleaning and painting with spray painting to required gloss with white synthetic enamel paint to complete body & writing MES No with black paint etc complete all as specified and directed by Engineer-in-Charge Note :- Material/ items/spare parts required for repair/ replacement shall be mesured and paid separetely under respective items of this BOQ

Supply and fixing in replacement of base assembly suitable for 25 ltrs capacity geyser with inlet and outlet pipe made out of copper base plate with gasket , proper size of nuts, bolts & washers etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement element 1.5 KW, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement element 2 KW, rubber gasket type with & including rubber gasket complete suitable for 25 Ltrs Geysers of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement PVC insulated cable 40/0.0076, 3 core copper conductor cable for connection fron geyser to top plug etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement outer tank sheet cover made of MS sheet suitable for 25 ltrs geyser capacity of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement inner tank sheet cover made of MS sheet suitable for 25 ltrs geysercapacity of any Make as installed at site etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement safety valve(pressure release valve) suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement brass,non return valve 15 mm bore suitable for 25/50 ltrs capacity vertical type geyser of any make as installed at site etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement indicator lamps(set of two -green & red) AC, 220 volts suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge

Supply and fixing in replacement thermostat switch , pointer type with adjustable knob, suitable for 25/50 ltrs capacity vertical type geyser & etc complete all as specified and directed by Engineer-in-Charge

Supply only PVC connection pipe complete with brass end terminal size 300 mm long .

Supply only PVC connection pipe complete with brass end terminal size 450 mm long .

Supply and fixing in replacement thermal cut out suitable for 25/50 ltrs capacity vertical type geyser etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in replacement industrial type switch socket for Geysers with 20 Amps MCB Make:- Iengard Cat No.6078 41 20 A SP complete or equivalent in makes mentioned in list of makes in Appendix `C'

Supply and fixing in replacement 15/16 Amp three pin, plug top, 230 Volts , suitable for 25/50 ltrs capacity geyser etc complete all as specified and directed by Engineer-in-Charge

Material & Labour for checking the solar water heater for No water in tap,Water not heated at all,although cold water flow is normal,Water not hot enough or sufficient quantity of hot water is not available,Little quantity of boiling hot water is received ,leakge of water from collectors etc and cleaning of Tubes and collectors etc and testing of Solar water heater for desired temperature hot water etc complete all as specified and directed by Engineer-in-Charge

An amount of Rs 95,943.00.00 shall be deducted from BOQ on account of schedule of credit

KAMINS CARE