REAPAIR REPLACEMENT MAINTENANCE RE ROUTING OF CI DI GI PIPE LINE FROM NODAL POINT I TO VARIOUS PUMP HOUSE INCLUDING CONNECTING ITEMS IN THE AREA OF AGE WATER SUPPLY NO III UNDER GE U WATER SUPPLY DELHI CANTT 10

Amount

Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr deep for pipe line in any type of soil getting out and levelling of bottom surface to required level complete all as specified and directed.

Excavation in trenches by cutting of road crossing, PCC hard standing for taking out/laying of pipe including making good the existing surface to match the original surface by using PCC 1:2:4 using 20 mm graded curshed stone aggregate etc complete all as specified and directed.

Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick complete all as specified and directed.

Removing excavated material from site to a distance not exc 50mtr away and depositing where directed not exc 1.5mtr from the starting point complete all as specified and directed

Taking up existing CI/DI water mains of the following bore & including all fittings complete all as specified and directed:-

400 mm bore

300 mm bore

200 mm bore

150 mm bore

Laying jointing, testing and commissioning of Pipe CI/DI following dia & received from item No 5.01 to 5.04 above, including replacement of old u/s CI/DI fittings by new one CI/DI fittings in to trenches in position complete all as specified and directed:-

400 mm bore

300 mm bore

200 mm bore

150 mm bore

Supplying, Laying, jointing, testing and commmisioning of DI Pipe of following sizes, with spigot and socketed ends centrifugally cast Class K-7 Push on joint confirming to IS 8329 laid in trenches complete all as specified and directed

400 mm bore

300 mm bore

200 mm bore

150 mm bore

(Note for Ser Item No 6.01 to 6.04 and 7.01 to 7.04 :- (i) Excavation, earthwork shall be measured and paid under respective item. (ii) New CI/DI pipe fitting incorporated under these item shall be measured and paid seperately.)

M&LCI/DI fittings for spigot/socket pipes such as bends of any radious and angle, collars, tapers, tail pieces, Tee pieces, Caps and plugs suitable above 150 mm bore dia all socketed or socket and spigot or side flanged complete all as specified and directed

Material and labour for Run lead joint including jointing material for CI/DI pipe of the following sizes complete all as specified and directed

400 mm bore

300 mm bore

200 mm bore

150 mm bore

M&L Rubber Gasket Joint (tyton joint) including jointing material for DI/CI pipe of following sizes complete all as specified and diected:-

400 mm bore

300 mm bore

200 mm bore

150 mm bore

Supplying & Fixing , jointing and testing of cast iron Sluice Valve ISI marked (PN-1.0) confirming to IS 14846-2000, flanged ends drilled having stainless steel spindle with cast iron wheel at top complete with nuts, bolts, washers and gaskets of following bores including dismentling of old sluice valve complete all as specified and directed:-

400 mm bore

300 mm bore

250 mm bore

200 mm bore

150 mm bore

Supply and fixing CI Foot valve flanges ends as per IS 4038 including flange joints such as packing, nut and bolts etc of following bores including dismentling of old foot vavle complete all as specified and directed:-

350 mm bore

300 mm bore

250 mm bore

150 mm bore

Supply and fixing CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 100 mm bore complete all as specified and directed

Supply and fixing CI Double Orifice Kinetic Air Release Valve flanges ends as per IS 14845 including flange joints such as packing, nut and bolts of size 80 mm bore complete all as specified and directed

M&L PCC (1:4:8) type D-2 using 40mm grated crushed stone aggregate as in sub base or foundation finished even and fair without using extra cement complete all as specified and directed

M&L PCC (1:2:4) type B-1 using 20mm graded crushed stone aggregate finished even and smoooth without using extra cement as on brick pillars complete all as specified and directed.

Labour for cutting of existing CI / DI pipe for insertion of CI specials /valves etc. all as required including dewatering of lekage water all as required of following size :-

400 mm bore

300 mm bore

200 mm bore

150 mm bore

Note:- Sch of credit amount of Rs. 426100/- shall be deducted from total quoted BOQ Amount when work acceptance letter issued.

Rahul Enterprises

JAMDAGNI ENGG WORKS

M/s Shri Shyam Bharat Builders

Ridhi engineers and builders