PAINTING TANKS-MR&MRII

ABRASIVECU-SLAGBLAST — SURFACE PREPARATION: ABRASIVE (CU-SLAG) BLAST CLEANING, CONFORMING TO SSPC-SP-10 OR SA 2 1/2STANDARD

HAND TOOL CLNGSURFACE — SURFACE PREPARATION: HAND TOOL CLEANING, CONFORMING TO SSPC-SP-2 OR ST2 STANDARDS

CLNGSURFACE — SURFACE PREPARATION: POWER TOOL CLEANING, CONFORMING TO SSPC-SP-3 OR ST3 STANDARDS

CLNGSURFACE PRPRTN,HIGH 6000-Mumbai Refinery — SURFACE PREPARATION: HIGH PRESSURE FRESH WATER JET CLEANING (8,000 TO 10,000 PSI PRESSURE)

PNTNG,F/SYNTHTC ENML — BAND PAINTING: BRUSH APPLICATION OF SYNTHETIC ENAMEL PAINT, OF DESIRED COLOUR,DFT OF 25 MICRONS ** [MENTIONED UNIT COST IS FOR 1 COAT OF 25 MICRONS EACH]**

PNTNG,BRSH,COAL TAR EPXY 6000-Mumbai Refinery — DADO PAINTING: BRUSH APPLICATION OF COAL TAR EPOXY PAINT, 1 COAT OF 125 MICRONS DFT** [MENTIONED UNIT COST IS FOR 1 COAT OF 125 MICRONS EACH]**

CLNG,F/MOPPING, W/CLNG — MOPPING, WITH CLEANING AGENT

BRISTLE BLASTING&CLNG,AS — BRISTLE BLASTING N CLEANING AS PER SA 2 1/2 STD

TNK INTERNAL PAINTING:ONE 6000-Mumbai Refinery — TANK INTERNAL PAINTING: ONE COAT OF EPOXY HOLDING PRIMER[MENTIONED UNIT COST IS FOR 1 COAT OF 50 MIC RONS EACH]

INTRNL PNTNG,F/TANK,ONE — TANK INTERNAL PAINTING: ONE COAT OF SOLVENT FREE HIGH BUILD PHENOLIC EPOXY COATING WITH POLYAMINE ADDUCT HARDENER [MENTIONED UNIT COST IS FOR 1 COAT OF 300 MICRONS EACH]