Loading
Loading…
Loading…
Tender Value
₹25.1 L
EMD Value
₹50,300
Closing Date
17 Jun 2026, 11:00 amClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
TENDER
13 conditions · 2 needing a document upload
No Financial credentials are required for tenders having advertised value up to Rs.50 lakhs.
No Technical credentials are required for tenders having advertised value up to Rs.50 lakhs.
26 conditions · 2 needing a document upload
Uploading of Scanned copy of Statement of Bank details, PAN & GST.
Compliance with Public Procurement (Preference to Make in India) Policy: This tender complies with Public Procurement (Preference to Make in India), Order 2017-Revision dated 19.07.2024 of Department of Promotion of Industry and Internal Trade, Ministry of Commerce and Industry, Govt. of India (herein referred to as PP-PIM), circulated vide Ministry of Railways (Railway Board)'s letter No.2020/RS(G)/779/2/Pt.1 (E3322671) dated 20.08.2024, and all its amendments. Only Class-I local suppliers (as defined in PP-PIM) shall be eligible to bid for list of items specified in Ministry of Railways (Railway Board)'s letter no.2025/RS(G)/779/3 (E3488356) dated 02.05.2025. For other items, only Class-I and Class-II local suppliers are eligible to bid. At the time of bidding, each bidder is required to indicate percentage of local content (as defined in PP-PIM) and provide self-certification that the item offered meets the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be. If this self-certification is not submitted, the bid will be summarily rejected. For contracts above Rs.10 crores, the provisions of Para 9(c) of PP-PIM shall be additionally applicable. For the purposes of this NIT, the "local content" (as defined in PP-PIM) requirement to categorize a supplier as "Class-I local supplier" is minimum 50% and for "Class-II local supplier" is minimum 20%. Also, the Margin of Purchase Preference (as defined in PP-PIM) is 20%. The procedure for preference to Make in India shall be as specified in PP-PIM. Uploading of self-certificate for meeting the local content requirement for "Class-I local supplier"/"Class-II local supplier", as the case may be (proforma attached). Non-submission of this certificate will lead to summary rejection of bid. ( Click here to download Format)
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Provision of Conventional coach Watering facility in Platform No.1&2 at CMGR station.
Y-E-29-2026-27-26~SWR
Y-E-29-2026-27-26
Open
Works - General
120 Days
Dharwad, Karnataka
₹0
₹50,300
17 Jun 2026
27 May 2026
3 Jun 2026
81 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 25,14,202.17 | ||
| — | 1800.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of up to 35 sq. mm size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. | — | — | — | 4,55,400 | |
| — | 200.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade up to 35 sq mm size (clamped with 1mm thick saddle) on wall surface as required | — | — | — | 12,800 | |
| — | 450.00 | — | — | ||
| Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of Above 35 sq. mm and up to 95 sq. mm size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. | — | — | — | 1,24,200 | |
| — | 50.00 | — | — | ||
| Laying and fixing of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade above 35 sq mm and up to 95 sq mm size (clamped with 25X3 mm MS flat clamp) on wall surface as required | — | — | — | 7,550 | |
| — | 1800.00 | — | — | ||
| Supply of HDPE pipe of dia 50 mm grade PE-100 with pressure of PN 6 for safety of cables. | — | — | — | 1,01,250 | |
| — | 1800.00 | — | — | ||
| Laying of HDPE pipe of 50 mm dia, PN-6, PE-80 for safety of cables as per the directions of Engineer at site and all the ends should be sealing with bituminous compound. | — | — | — | 27,000 | |
| — | 450.00 | — | — | ||
| Supply of 75 mm Diameter PE 100 HDPE, PN 6 Pipe for protection of power cable. | — | — | — | 63,000 | |
| — | 450.00 | — | — | ||
| Laying of HDPE Pipe of dia 75 mm grade PE-100 with pressure of PN 6 for safety of cables and all the ends should be sealing with bituminous compound. | — | — | — | 6,520.5 | |
| — | 300.00 | — | — | ||
| Supplying and installing 300 mm width X 50 mm depth X 1.6 mm thickness size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. | — | — | — | 3,18,600 | |
| — | 200.00 | — | — | ||
| Platform surface/concrete/Tiles cutting for excavation of cable trench 300 mm wide x 300 deep, re-fitting of soil and re- plastering of excavated trench with cement to bring back to its original shape. | — | — | — | 1,25,168 | |
| — | 200.00 | — | — | ||
| Excavation of cable trench, 450 mm. wide and 1000 mm. deep in all types of soil and refilling the cable trench to its original position. | — | — | — | 30,606 | |
| — | 30.00 | — | — | ||
| Supply and Fixing of GI pipe of dia 50 mm. for cable rising & protection including clamping, fixing arrangements and sealing with bituminous compound. | — | — | — | 26,756.1 | |
| — | 2.00 | — | — | ||
| Design Fabrication supply, fixing testing and commissioning of L.T control panel of suitable size made up of 16 S.W.G CRCA sheet, angle frame, duly powder coated with double door and locking arrangement on suitable size plinth/ foundation (plinth should be minimum 1 feet below surface level and 1 meters above surface level) with MS "C" channel with nut bolt,100A Aluminium busbar with following switchgears (All C Curve)- 63A 4Pole MCB - 02 No., 32 A 4 Pole MCB-02 No. | — | — | — | 43,087.58 | |
| — | 2.00 | — | — | ||
| Supply, installation, testing and commissioning of 3 phase 5 HP Mono submersible pump working on 415 V 50 Hz AC supply BEE 5-star rating with warranty similar to Make CELVIN Model STKOMT24 or with latest specifications. | — | — | — | 57,825 | |
| — | 150.00 | — | — | ||
| Supply and fixing of heavy-duty uPVC column pipe coupler of 40mm dia, pressure 35 kg/cm2 with collars and other required suitable accessories complete. | — | — | — | 63,345 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of centrifugal type vertically multistage bore-well submersible pump as per the following technical specification. The Pump model QF duty point will be Flow 120LPM @ working Head 110 Mtr. The Pump design will be the Flow Range starting from 15 LPM to 130 LPM & Head Range of 150 Mtr. To 82 Mtr. Pump material to be like, Pump impeller-SS 304, Pump casing-SS 304, Pump Shaft- SS410 steel, Pump motor body- SS 304. The pump motor should be 5 HP BEE 5 star rated with warranty which will operate through 415V-AC/50 Hz standard power supply. The motor manufacturing and testing as per IS 8034-2018 or latest similar to Make CELVIN Model STKTP620. | — | — | — | 37,484.11 | |
| — | 1.00 | — | — | ||
| Supply and installation of smart VFD rust proof for outdoor application to operate 5 HP PMSM type motor with dry run protection, over & under voltage protection, phase reversal protection, single phase preventer, graphical display, GSM based remote monitor system (RMS), fault indication alarm system, IP-65 deg. Of protection, water level indicator, auto/manual operation through device like mobile/laptop/PC. The regular pump operational data like current, voltage, hours of operation, power consumption to be access through Railway engineer devices like Mobile/Laptop/PC. The VFD selection to be done considering the maximum ampere rating of the pump on full load condition. | — | — | — | 33,088 | |
| — | 180.00 | — | — | ||
| Supplying & fixing PVC insulated PVC sheathed copper conductor submersible 3 Core 4.0 Sq mm Flat Cable, ISI Marked in existing metal/ HDPE / PVC/ pipe/ in bore well/ in sump including fixing the cable to GI/HDPE pipe with suitable cable tags of following sizes etc. complete as required. | — | — | — | 33,480 | |
| — | 25.00 | — | — | ||
| Supply and provision of insulated type 32 A 2P+E plastic Industrial plug and socket with 32 A 2 pole MCB including all connecting materials and works. (Similar to Havells Code No: DHDPBDP032 or latest). | — | — | — | 98,092.5 | |
| — | 8.00 | — | — | ||
| Supply, assembly, fixing and commissioning of 3 Phase 4 wire Busbar Chamber-63 Amps capacity 4 Way Similar to M/s. Havells, SAP Code-IHBC006304 or latest. | — | — | — | 52,613.12 | |
| — | 10.00 | — | — | ||
| Supply of 63 Amps Industrial type Plug and socket with (1) 4 pole 100 Amps 440 Volts MCCB with breaking capacity. 25Ka (2) 63 Amps, 440 Volts (3Phase +neutral + earth) Industrial type Plug & socket. (3) 20 Amps, Industrial type plug & socket with 16 Amps DP MCB (4) Mechanical interlocking between MCCB & plug socket (4) way terminal Block DMC molded - 2 Nos, for cable terminals and looping of 4 core x 120 Sq mm (6) BAM type socket cover (7) plug locking ring (8) Earthing terminals. (9) Glands suitable for 4 core x 120 Sq.mm (10) Name Plate (11) danger plate. The inter locking arrangements shall be such that (1) MCCB cannot be switched ON unless plug is inserted (2) plug cannot be withdrawn unless the MCCB is in OFF position. (3) Enclosure door can be opened only with MCCB in OFF position and plug removed. The housing for socket * plug with interlocked MCCB shall be an enclosure fabricated out of MS sheet of thickness 1.6 mm and shall be of weather proof suitable for outdoor installation. | — | — | — | 2,17,381.5 | |
| — | 10.00 | — | — | ||
| Erection of above 63 Amps Industrial type plug and socket as mentioned in above schedule. | — | — | — | 32,613 | |
| — | 4.00 | — | — | ||
| Supply erection and commissioning of pole mounted 230V AC/110V DC battery chargers. | — | — | — | 1,69,835.4 | |
| — | 20.00 | — | — | ||
| Supply and fixing of LT cable terminal LILO box of minimum size 300 mm x 200 mm x 170 mm with Hinged door with 32A strip connector. | — | — | — | 38,727.6 | |
| — | 20.00 | — | — | ||
| Supply of HT danger Board of size 400x300x3 mm thick indicating skull bone marked "DANGER" 11 KV HT/LT to be provided in Three Languages Kannada, English & Hindi Made of MS Plate as per HQs SWR Standards | — | — | — | 6,750.8 | |
| — | 1.00 | — | — | ||
| Supply, fixing, installation and commissioning of 6 way FP Double door Distribution board with following switch gears similar to Havells (All 'C' Series) FP RCBO-40 A having sensitivity 30mA-1 No., SP MCB 6-32 A-4 No., along with Supply fixing and commissioning of 02 No's Digital Timers with 02 No's Automatic Modular Contactors along with 1 No. TYPE 2 AC TP+N surge protection device with required suitable hardware and internal wiring complete. | — | — | — | 26,392.93 | |
| — | 1.00 | — | — | ||
| Supply & Provision of outdoor type 1 Ph Meter panel board made up of 14 SWG MS steel enclosure with locking/sealing arrangements of minimum size 300x 250x 250 mm, front glass for meter reading with hylam sheet (3mm thick) inside & fixed with following items:(a) Porcelain fuse cut out 32 amps- 1No,(b).DP-MCB(C-Series) 32 Amps -1 No. & including all internal wirings complete as per specification. (Meter will be supplied by Railways) | — | — | — | 2,583.12 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 8 Way Double Door DP MCB Distribution Board Similar to M/s Havells with following switchgears (All 'C' Series) DP RCBO 25A with Sensitivity 100 ma- 1 no, SP MCB-16 A-1- 1 no, SP MCB 10A-4 Nos along with 1 No. 1P+N SPD with required suitable hardware and internal wiring complete. | — | — | — | 8,712.48 | |
| — | 10.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 4 sq. mm + 1 X 4 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / cassing & capping as required at site. | — | — | — | 3,730 | |
| — | 150.00 | — | — | ||
| Wiring for circuit/ submain wiring along with earth wire with the 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire sizes of FRLSH / HFFR PVC insulated copper conductor, single core cable in surface / concealed medium class PVC conduit / cassing & capping as required at site. | — | — | — | 46,650 | |
| — | 20.00 | — | — | ||
| Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLSH / HFFR PVC insulated copper conductor single core cable in surface / Concealed medium class PVC conduit / Cassing & capping, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLSH / HFFR PVC insulated copper conductor single core cable etc. as required. (Group - B). | — | — | — | 27,240 | |
| — | 6.00 | — | — | ||
| Supplying and fixing suitable size GI / PVC box with modular plate and cover in front on surface / recess / concealed, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. / cassing & capping as per site requirement. | — | — | — | 3,270 | |
| — | 2.00 | — | — | ||
| Supplying and fixing suitable size GI / PVC box with modular plate and cover in front on surface / recess / concealed, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. / cassing & capping as per site requirement. | — | — | — | 1,318 | |
| — | 16.00 | — | — | ||
| Supply, fixing, testing and commissioning of 18 - 22-watt 6500k batten 4 feet approximate length LED lighting fixture as per specification SWR/LED LIGHT FITTING (Indoor/outdoor) /001-2016 effective from 18.04.2016 or latest. Including all other required accessories complete. | — | — | — | 10,896 | |
| — | 2.00 | — | — | ||
| Supply, fixing, testing and commissioning of 10 - 12-watt 6500k 2 feet length approximately LED lighting fixture as per specification SWR/LED LIGHT FITTING(Indoor/outdoor) /001- 2016 effective from 18.04.2016 or latest. | — | — | — | 356.48 | |
| — | 3.00 | — | — | ||
| Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) motor ceiling fans 26 W 5 star rated with remote 1200 mm size as per specifications. | — | — | — | 8,646 | |
| — | 2.00 | — | — | ||
| Supply assembly fixing and commissioning of 200 mm size BLDC Ventilating fan including all other accessories complete. | — | — | — | 6,050 | |
| — | 50.00 | — | — | ||
| Supply of 45-Watt LED street lights, as per specification SWR / LED LIGHT FITTING (Indoor/outdoor)/001-2016 effective from 18.04.2016 or latest. | — | — | — | 97,670.5 | |
| — | 50.00 | — | — | ||
| Freight, Fixing and commissioning of LED fitting complete with suitable accessories. | — | — | — | 6,011 | |
| — | 15.00 | — | — | ||
| L.T. Earthing arrangements for hard soil using 50 mm C-Class GI Pipe- 2.7 Mtr length, soil treatment by spreading of 25 kgs each of salt and charcoal, duly painting earth pit with black paint and stencilling of earth resistance value with date, including supply and laying of 6 SWG G.I. wire and other hardware to connect equipment at site complete. | — | — | — | 81,501.45 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .