Providing Special Repair to EI in TB Sanatorium Hospital at Dhrampur Distt. Solan HP SH Providing Re Wiring therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required.Group-C

Re-wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface/recessed Steel / PVC conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable including dismantling of the existing wiring as required. (including switch & sheet etc.) Group-C

Supplying and drawing following size of PVC insulated, heat resistant, flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in existing surface / recessed, Steel/PVC conduit as required.

1x1.5 Sq. mm.

2x1.5 Sq. mm.

3x1.5 Sq. mm.

3x4.0 Sq. mm.

6x4.0 Sq. mm.

3x10 Sq. mm.

Supplying and fixing of following sizes of Steel conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required:-

20 mm. dia

25 mm. dia

Supplying and fixing metal box of 100mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 5 pin 5/6 amps socket outlet and 5/6 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing metal box of 180mmx100mmx60mm deep (nominal size) on surface/recess with suitable size phenolic laminated sheet cover in the front including providing and fixing 6 pin 15/16 amps socket outlet and 15/16 amps, piano type switch, connections, painting etc. as required.

Supplying and fixing wall bracket containing thread type CFL lamp Holder (s) of all sizes and shapes, complext with all accessories but excluding CFL lamp including making connections, testing etc. as required. Make:- Havells Lighting ( Cat No. LHDL03160099) or at par in Philips, Jaquar complete in all respect as approved by Engineer-in-Charge.

Supplying and fixing bakelite batten/angle holder including connections etc. as required:-

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase,230 volts complete as required:-

Providing and installation of exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Heavy duty, 300 mm sweep

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of Expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, providing and fixing of Non-return valve, Dead weight safety valve, 2 No C.P. connection rods 18" long, making good the damages, electrical connections, safety valve connections, testing and commissioning etc. as required:- 10 Liter capacity water heater (Cat-A)

Providing and installation of following surface mounting slim square type LED downlight in white finish with anti glare polycarbonate diffuser and energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing and commissioning etc. as required. Make: Philips, Syska, Bajaj,Greatwhite, C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing of 10W LED bulk head fitting with all accessories including making connections, testing etc. as required. Make Greatwhite Philips, Panasonic or any other approved by Engineer-in-Charge.

Providing and installation of following type of LED batten (Commercial Type) with aluminium housing provided for efficient heat dissipation, with anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clips & loop in loop out wire, connections, testing and commissioning etc. as required. Make: Philips, Syska, Havells, Bajaj, Greatwhite, Panasonic or any other approved by Engineer-in-Charge.

LED Batten Light 20W

Providing and Installation of Wall mounting fan of 300 mm sizes i/e hang the same in position on the wall,connections,testing and commissioning etc.as required with best satisifaction of Engineer in charge. Make: Havell's, Bajaj, Crompton Greaves, Usha, Kahitan etc. (D size)

Supplying and erection of street light bracket made of G.I. pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required:-32 mm dia. G.I. pipe, heavy class

Supplying and fixing 30 W LED street light in aluminium pressure die cast housing with toughned glass cover with individual LED lenses (IP 66 protection) including connections, testing etc. as required complete in all respects. Make: Greatwhite, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size:-

Armoured cable 16 sq. mm (twin core)

Armoured cable 35 sq. mm (3.5 core)

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required.

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required:-

Double door-4 Way

Double door-8 Way

Double door-12 way

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-MCBDP-40 Amp Cat-A

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Cat.-A

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation made from (50 mm x 50 mm x 6 mm thick) M.S. angle iron frame, covered with 1.6 mm thick M.S. sheet duly welded on five sides & front side hinged, complete with locking arrangement with sufficient No. vertical and horizontal intermediate switchgear supporting members each of M.S. flat 50mmx6mm thick of suitable length duly welded. The cubical pedestal shall have cable entry box at one or two sides and 4 No. legs of 50mmx50mmx6mm thick M.S. angle iron each 60 cm long including, powder coated painting and bonding to the existing earth etc., the same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 300 mm deep (nominal)

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required.

100 Amp-10 KA. Category-A

200 Amp-16 KA. Category-A

Providing and fixing following rating, four pole, 415 volts, On-Load change over switch unit, panel mounting, front handle operation, including drilling holes in the cubical, making connections, etc. as required. 200 Amp

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx3.17mm),in the existing enclosure with all accessories including connections etc. as required:-

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required:-

Providing and installation of LED 9W retrofit lamp B-22/E-27 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V,50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. Make: Greatwhite, Philips, Syska, GE, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

The credit for old dismantalled material will be recovered from the contractor on L/s basis @ Rs. 5000/-Only.

yash pal