Maint / Repair of DG Set 40 KVA installed at Pump House 4 at Varanasi Cantt

Amount

M&L for dismantling / opening the head gasket and taking out the old unserviceable liner and block assembly complete all as specified and directed. 1 Job

M&L for replacement of block and liner assembly complete with piston and ‘O’ ring for DG Set 40 KVA Make – Kirloskar all as specified and directed. 1 Job

M&L for taking out old unserviceable self starter and S&F self starter assembly complete all as directed for DG Set 40 KVA Make – Kirloskar. 1 No

M&L for servicing the DG Set and taking out old unserviceable fuel filter, oil filter for DG Set 40 KVA Make – Kirloskar. 1 Set

M&L for drain out the old unserviceable engine oil and replacement with fresh oil 20W 30 of Make Gulf oil or equivalent. 15 Ltrs

M&L for taking out fuel pump and tpt to workshop for servicing and calibration including replacement of ‘O’ ring and washers as required and directed. 1 Job

M&L for taking out the exhaust manifold and refixing after cleaning and replacement of lather gasket and asbestos rope as required. 1 Job

M&L for replacement of fuel pipe and flexible coupling with jubilee clip etc all as required and directed. 1 Set

M&L for taking out fuel tank and refixing after cleaning and replacement of control valve including painting with two coats of synthetic enamel paint including preparation of steel surface etc all as required and directed. 1 Job

M&L for preparation of old painted surface of DG Set and painting with two coats of synthetic enamel paint all as directed. 1 Job

M&L for replacement of old unserviceable lead acid battery 12V 100 AH with battery terminal lead all as required. 1 Each

M&L for taking out old unserviceable change over switch and replacement with 415V 100 Amp front operated extendable rotary handle change over switch all as directed. Make : Havells/ABB/L&T. 1 Each

M&L for taking out old unserviceable MCCB any type and supply and fix 415V, 4 Pole MCCB 160A, 25KA with thermal magnetic release for incoming and MCCB 415V 4 pole 100A, 25KA for outgoing with spreader links and connection of cable complete with proper lugs all as specified and directed. 1 Each

M&L sand cushioning with dry local sand for cable protecting underground cable (8cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness only shall be measured. 2.6 CUM

Supply and lay cable XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 70 sqmm 3.5 Core. 15 RM

comondo security agencies

TECH-NIG COMPUTERS

PANDEY ENTERPRISES