PROVN OF NSC, TELECOM AND OPTO SEC SIZE 16M X 5M WITH 3 PARTITION, DUST PROOFING AND TEMPERATURE CONTROL FOR 309 FD WKSP COY, PROVN OF FALSE CEILING WITH ELECT FITTING AT CORPS MT OF HQ 17 CORPS AND CERTAIN SANCTIONED WORKS UNDER GE PANAGARH

Amount

Excavation in trenches not exc 1.5m wide and not exc 1.5m deep in soft/ loose soil complete all as specified and directed.

M & L for fly ash brick work straight or curved on plan exc 6 m mean radius built in Cement Mortar (1:6) complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) in foundation filling and mass concrete complete all as specified and directed.

Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed.

Returning, filling including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as specified and direcetd.

M&L for hardcore of broken stone gauge n exc. 63 mm, deposited, spread and levelled in layers n exc.15cm thick, watered and rammed to a true surface complete all as specified and directed.

M & L for sand filling under floors or in foundation including watering and consolidation complete all as specified and directed.

M & L for providing 100 mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.

M & L for providing 100 mm thick PCC (1:2:4) Type B-1 (using 20 mm graded stone aggregate) as in flooring including finishing the cement concrete surface even and smooth with using extra cement complete all as directed.

M&L for Non-skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc over and including 15 mm thick cement mortar (1:6) screed bed etc set and jointed in neat cement slurry and pointed in white and coloured cement to match complete all as specified and directed. Note : Design, shade and pattern of fixing of tiles shall be as be approved by GE.

S & F 30 mm flush shutters core construction, with block board core and plywood face panels, commercial type on both sides, ISI marked complete all as specified and directed.

S&F steel windows with side hung shutters (steel section weighing min 1.42 Kg/m) including projection type hinges with steel hanle, and steel peg stay,complete with glazing bars, dovetailed or welded complete all as specified and directed.

M & L for cutting holes in brick walls exc half brick but n. exc one brick for inserting holdfasts and making good dismantaled portion in cement mortar (1:4) or cement concrete (1:2:4) type B-1 built in cement mortar complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and dirceted.

S & F aluminium anodised barrel tower bolt of extruded section of length 150 mm complete all as specified and directed.

S & F Aluminium handles, cast type anodized of size 150 mm, ISI marked complete all as specified and directed.

S & F butt hinges medium weight of size 100mm complete all as specified and directed.

S & F in repair hydraulic door closer aluminium extruded section body desiganation No-3 universal type, suitable door shutter width and weight between 61kg to 80kg of approved make, fixed with screws, complete all as specified and directed.

M & L for preparation of new wooden surfaces of any description exc 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L for preparation for two coats of synthetic enamel paint over & including a coat of red oxide primer over new steel & iron surfaces of any description, not otherwise described, over 10 cm in width or girth complete all as specified and directed.

S&F pressed steel framed of size 105 x 60 mm for doors and window with one or more rebated including necessary fixing items, lugs, hinges, lock strike plate etc complete all as specified and directed.

S&F pressed steel frame of size 125 x 60 mm for doors with one more rebeated including necessary fixing lugs,hings,lock sttike plate etc complete all as specified and directed.

S & F 3mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5 Sqm in each pane complete all as specified and directed.

M & L for cement concrete (1:2:4) Type B-0 (using 12.5mm graded stone aggregade) as in copping, cills steps and similar works complete all as specified and directed.

M&L for 10 mm dia and over TMT steel bar cut to length, bend to shape as per required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 25.00 mentioned here-in-above but 6 mm to 8 mm dia as stirrups complete all as specified and directed.

M & L for reinforced cement concrete (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) foundations, including rafts, footings, foundation beams, plinth beams; bases for columns, etc. and mass concrete etc complete all as specified and directed.

M & L for reinforced cement concrete (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M & L for reinforced cement concrete 1:2:4 (nominal mix) type B-1 (using 20mm graded stone aggregate) in beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed.

M & L for reinforced cement concrete (1:2:4) (nominal mix) type B-1 (using 20mm graded stone aggregate) in columns, pillars, piers, etc complete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work for rough finished surface, not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

M & L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish smooth & even without using extra cement complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even complete all as specified and directed.

M&L for rendering 5 mm thick in cement mortar (1:6) on fair faces of brick work or concrete wall surfaces & finishing the surfaces fair and even complete all as specified and directed.

M&L for two coats of cement base paint on walls on new plastered surface incl preparing new surface complete all as specified and directed.

M & L for preparation of new plastered surface of ceilling and applying three coats white wash complete all as specified and directed.

M & L for preparation of new wall surface and aplying two coats of oil bound distemper including chalk whiting over & a coat of wall care putty complete all as specified and directed.

M&L for 75 mm thick PCC (1:3:6) type C-2, as in plinth protection/footpath/hardstanding/ paving (using 40 mm graded stone aggregate) finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

S&F framed work such as grill, grating etc with end bars shoulder and or riveted in to spike framed guard bars barred iron doors ladder railing framed works complete all as specified and directed.

S&F 605mmx605mm Anodised aluminium snap grid frame work for false ceilling with all necessary aluminium angle & Tee arrangement with and incl fixing cleats screw etc complete all as specified and directed.

S&F Hanger 6mm dia G.I (up to 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I flat 40x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed.

S&F 8mm thick board (non asbestos fiber) plain building boards fixed in aluminium frame work in ceilling flat or sloping with screw complete all as specified and directed.

S&F Aluminum alloy anodized sliding door bolt 300mm long with hasp and staple (bolt type) and fixing bolts and sliding bolts of extruded such or cast aluminum alloy complete all as specified and directed.

M&L for kota stone slab 20-25 mm thick in over 20mm cement screed base (1:6) in cement mortar laid and jonted with gray cement slurry mixed to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M & L for applying one coat of weather coat paint on wall surface complete all as specified and directed.

S&F pre-painted galvatume aluminium zinccoating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550mpa as in covering/clading to wall fixed with self taping screw complete all as specified and directed.

M&L for cement concrete type B0 1:2:4 (12.5mm graded agg) in cills,steps, plinth course,coping etcc concrete mixed with water proofing compound complete all as specified and directed.

M & L for point wiring with 1.5 Sq mm (Nominal area) PVC insulated and unsheathed 1.5 sq mm cable of 1100 Volt grade with stranded copper conductor in and including PVC casing caping including contineous earth wire of 1.5 Sq mm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylam sheet cover/ PVC Box including Top PVC sheet fixed with brass screw complete with all accessories for one light point/Fan point controlled by one ,one way switch complete all as specified and directed.

All as per Item No 48.00 mentioned here-in- above but one 3 pin 5 Amps socket out let on the same board with other switches with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed.

All as per item No 48.00 mentioned here-in- above but one 3 pin 5 Amps socket out let on independent board with 1.5 sq mm PVC insulated copper conductor for continuous earthing complete all as specified and directed.

Material and labour point wiring for light point/ fan point, one light/fan/exhaust fan point controlled by one, one way switch using 1.5 sqmm nominal cross sectional area multistranded copper conductor ,PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings of medium grade, including pressed steel terminal switch boxes, 3 mm thick bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers and 1.5 sqmm nominal cross sectioanl area multistranded copper conductor FR PVC insulated unsheathed earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

All as per item No 51.00 above but one 3 pin 5 Amps socket out let points on independent board complete all as per specified and directed.

All as per item No 51.00 above but 5 Amp socket on same board with other switches complete all as per specified and directed.

Material and labour wiring for 15 Amps socket out let on independent Boards controlled by one, one way switch using 4.0 sqmm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FR cables in and including 20 mm dia or higher size PVC concealed conduits and fittings, including pressed steel terminal switch boxes , 3 mm thick bakelite sheet top cover (ISI Marked) fitted with Chromium plated brass screws & washers and 2.5 sqmm nominal cross sectioanl area multistranded copper conductor , PVC insulated unsheathed FR cable earth wire and connecting to earth dolly and brass screws, washers etc. complete all as specified and directed.

M & L for Switch piano flush type single pole one way 6 Amp complete all as specified and directed.

M & L for Switch socket combination 2 in 1, 3 pin, 6 Amps flush type complete all as specified and directed.

M & L for Socket outlet 2 in 1,3 pin , 6 Amps flush type complete all as specified and directed.

Supply and fixed switch socket combination 2 in 1 multipurpose 5 pin , (6 Amps ) flush type controlled by one switch complete all as specified and directed.

S & F for Socket outlet 2 in 1, 3 pin, 5/6 Amps flush type for same board complete all as specified and directed.

Supply and fixed switch socket combination 2 in 1 , 6 pin , (16 Amps ) flush type controlled by one switch complete all as specified and directed.

S& F Switch socket combination 2 in 1, 5 pin, 5/15 amp flush type complete all as specified and directed.

Supply & fixed ceiling rose surface bakelite 65 mm x 50 mm two to three terminal suitable for 230 Volts AC 6 Amps complete all as specified and directed.

M & L for Lamp holder with insulated body, with back plate suitable for batten fittings complete all as specified and directed.

Supplying and fixing two single core ,6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade drawing in and including nd including suitable size PVC conduit (ISI marked), concealed, including 6 sqmm nominal cross sectional area multistranded copper conductor FR cable, PVC insulated unsheathed 1100 Volts grade earth wire complete all as specified and directed.

M&L point wiring with 2.5 Sqmm (Nominal area) PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper concuctor in and including PVC surface PVC casing and caping including accessories along with continuous earth wire 2.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylam sheet cover fixed with brass screw complete with all accessories for one light point/Fan point controlled by one, one way switch complete all as specified and directed.

M & L for sub main wiring with two single core PVC insulated cable with Copper conductor unsheathed cable of size 6 sqmm drawn through & including PVC casing capping with 6 sqmm PVC insulated copper wire single core for continuous earthing after taking out old unserviceable complete all as directed. Note:Two run 6 Sq mm of cable shall be measured as single run complete all as specified and directed.

S&F Sub main wiring with approved colour coding as per IS (Red, Black and Green for single phase circuits) with two single core 2.5 Sqmm and one 2.5 Sqmm PVC insulated FRLS cable with stranded copper conductor drawing into and including PVC non metallic rigid conduit medium grade complete all as specified and directed.

S & F 01x 18W LED retro fit fittings including 18W LED tube light with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

Supply and fix 18 W LED light fitting wall mounted batten 4'ft, extruded polycarbonate, enivromental friendly, heat sink provided for efficent heat dissipation and integrated electronic driver for 18 watt,6000K including necessary connection complete all as specified and directed.

Supply and fix security light fittings 25 watts, minimumm lumen output 100 lumen/Watt, made up of pressure dia cast housing with prismatic polycarbornate diffuser and individual LED with secondary optic and IP65 including necessary connection complete suitable for pole dia 25mm complete with all accessories including connected with twin core twisted flexible copper conductor of suitable size complete all as specified and directed.

S & F 01x 36 W LED fittings 2x2 recess mounted with super bright LED complete with all accessories and connection from ceiling rose with twin core twisted flexible copper conductor cable with suitable size and earthing complete all as specified and directed.

M & L Lamp LED 9 Watt suitable for baten holder complete all as specified and directed.

Supply and fix MCB SP, 6 to 32 Amps, 'C' series 10kA, 240 Voltsand to be housed in DBs including necessry connection complete all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fix MCB SPN 6-32 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

Supply and fix MCB TPN 40 Amps, 'C' series 10kA, 240 Volts and to be housed in DBs complete including necessry connection all as specified and directed. (Note :- Proper and suitable size cable lugs to be fixed with MCB are included in unit rate of each MCB of any rating).

M & L for MCB Double Pole 40 Amps 240 V complete all as specified and directed.

M & L for DB Box with corrosion free, push to open with glass cover door cover for DBs 8 way double door type with 200amps rated busbar SPN including necessary connection complete all as specified and directed.

S&F MCCBs 16KA, 63 Amp, TPN for incomer all as specified and directed

Supply and fix epoxy powder coated sheet metal enclosure for DBs, double door, Triple pole and neutral 415 V, 4 ways with mounting fitted with bus bar, DIN channel , neutral link and incoming contact complete all as specified and directed.

M & L for Step Regulator 230 -250 Volts, suitable for ceiling fan of size 1200 /1400 mm sweep complete all as specified and directed.

Supply & fixing ceiling fan 1400mm size , star 5 rated, ISI mark, 240V, 50 Hz complete all as specified and directed.

Supply & fix 25 Amps power unit combine with on/off switch enclosure single pole and neutral with two pin and earth socket complete all as specified and directed.

Supply, laying/fixing/connecting, testing and commissioning of LT under ground cable XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric cable (heavy duty) with multistranded aluminium conductor,1100 Volts grade in trenches/on wall/poles laid in ducts/inside protection pipe of the cross sectional area 25 Sqmm x 3.5 Core including cable glands,lugs and suitable size of MS saddle clips (where ever cable laid in ceilings/walls without cable duct) all as directed by the Engr-in-Charge for the following ratings Note:- (i) Excavation,sand cushioning,brick will be measured and paid separtely.

All as per item No 83.00 mentioned here-in-above but for 35 Sqmm x 3.5 Core complete all as specified and directed.

Supply and lay for dry river sand filling for cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed. (Note : Punned thickness shall be measured).

Supply and lay in trenches fly ash bricks, for cable protection complete all as specified and directed.

M&L 40 mm bore steel for tubing light grade ISI marked for protection of cable including necessary joint complete all as specified and as directed.

M & L for parallal boring under roads in conventional method without disturbing the top surface of the road for passing of cable protection pipe etc complete all as specified and directed.

S&F Pipes galvanized, 50 mm bore “light grade”, supplied and laid complete including necessary fittings such as tees, bends, elbows, sockets, reducers etc as per site requirement complete all as specified and directed.

S & F 15 mm bore Gun-metal glave or gate valve,with iron wheel head screwed both ends complete all as specified and directed.

Material and labour for earthing complete with galvanised mild steel earth plate electrode 600x600x6.0mm thick, burried directly in ground to a depth not less than 2.25 metres deep below ground level with top edge of earth plate not less than 1.5 metre below normal ground level surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate, using GI wire 4 mm dia as earth strip electrode bolted or rivetted to earth plate at one end and connected to equipments at another end, GI earth strip encased in and including 40 mm dia GI 'light grade' pipe from upper end of earth plate upto equipments,20 dia bore GI pipe 'light grade' as water pipe from earth chamber to upper edge of earth plate, Test point , GI funnel with wire mesh fixed on water pipe and PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in pit chamber and RCC pit cover 50mm thick precast RCC 1:2:4 type B-1, duly reinforced with MS round bars 6mm dia @ 100 c/c both ways with 10mm dia MS round bar as in lifting handles, excavation, earth work including laying the GI pipe concealed in floor/wall all as described in electric plate of SSR Part I complete all as specified and directed and testing on completion.

Supply and fix ceiling fan 1200mm size, star 5 rated, ISI mark, 240V, 50 Hz with necessary conection of 0.5 Sqmm copper flexible twin twisted cable (length not exceeding 0.5 metere) from ceiling rose to fan complete all as specified and directed.

Supply and fixing wall split units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with minimum 3 star rating and EER 3.2 of capacity 1.0 TR, ISI marked complete all as specified and directed.

Supply & Fix Voltage Stabilizer for automatic operation single phase neaturally air cooled indoor type & designed for input variation between 130V to 280V with output Voltage Stabilizer at 220V to 240V with accuracy of + 2%and of capacity of 3 KVA complete all as specified and directed.

Supply , installation , commissioning of Glass top, double door deep freezer capacity 400 ltrs , single phase 240 Volt 50 Hz,Precoated inner liners,castor wheels ,UV grade plastic materials,signal indicator,PUF insulation and powder painted body complete all as specified and directed.

S&F voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 130 V to 250 V with output voltage stabilized at 230 V with accuracy of + 2.5 of capacity 4 KVA complete all as specified and directed.

Supply and fixing water cooler having aprox stroage capacity and nominal cooling capacity 40/80 Ltrs, fully stainless steel, electric driven single phase, ISI marked complete all as specified and directed.

S & F GI tube 15mm bore medium grade galvanized with all fittings and fixed complete to walls and ceilings or laid in floors etc complete as specified and directed.

Supply and fixing of electric water heater storage type 25 Ltrs with all fixing arrangement including nuts & bolts etc complete all as specified and directed.

S&F Stop valve 15mm fancy type CP cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe complete all as specified and directed.

5. S&F Bib tap 15mm cast copper alloy high pressure with crutch or butterfly handle screwed for iron pipe complete all as specified and directed.

6. S&F PVC Connections 15 mm size with PTMT nuts of length 300 mm long, ISI marked complete all as specified and directed.

Supply & fixing wall mounted fan AC single phase 230 Volt with high performance motor, 400 mm sweep size pull card control for speed and oscillation on & off, aero dynamically designed balanced propeller type blade including fixing on wall with necessary arrangement complete all as specified and directed.

ANSH CONSTRUCTION

MS ROYAL CONSTRUCTION INDEX NO 158 2010 BKP

NATIONAL CONSTRUCTION CO

BANSAL CONSTRUCTION

HIGH HILLS INFRA

M/S Ali Trading Co