setting up of new administrative office Sholinganallur

Electricial Work

Supply, Installation, Testing and Commissioning of 55" smart LED TV with following specifications a) Screen Resolution 3840 x 2160 b) IPS pannel c) Slim back light LED module d) 900 PMI e) Triple XD engine f) Dynamic scanning g) ANR h) True colour generator i) 8modes of picture j) picture wizardIII k) Real cinema 24P l) HDMI -3nos m) USB -3nos n) Built in LAN o) Magic remote (Make: Sony/ LG /Samsung).

Supply and Fixing of Raceways of size 100mm x 75mm x 10mm x 2mm with cover 2mm thickness. The rate is inclusive of all accessories including necessary floor cutting & chipping work and carting away of excess debris from site etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply, fixing, testing & commissioning of 36W 4 Feet Suspended Linear LED luminaire with aluminium finish housing with opal acrylic diffuser fixed in separate CRCA steel sheet frame with operating voltage range (120 - 270V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 and with colour temperature 6500K range. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.99 with THD less than 10% & UGR < 19 complaince to LG7 guidelines. System consumption should be 36W LED fixture with lumen package of 2400 lumens. The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting etc., complete complying with standard specification and as directed by ELCOT Officers. Make: Crompton, Philips.

Supply, fixing, testing & commissioning of 18W round Recess Mounted LED luminaire with aluminium finish housing with opal acrylic diffuser fixed in separate CRCA steel sheet frame with operating voltage range (120 - 270V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 and with colour temperature 6500K range. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.99 with THD less than 10% & UGR < 19 complaince to LG7 guidelines. System consumption should be 18W LED fixture with lumen package of 2400 lumens. The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting etc., complete complying with standard specification and as directed by ELCOT Officers. Make: Crompton, Philips.

Supply, fixing, testing & commissioning of 18W Square Recess Mounted LED luminaire with aluminium finish housing with opal acrylic diffuser fixed in separate CRCA steel sheet frame with operating voltage range (120 - 270V AC). LED driver efficiency should be greater than 85% with CRI greater than 80 and with colour temperature 6500K range. LED having 50,000 burning hours with minimum 70% lumen maintenance and power factor 0.99 with THD less than 10% & UGR < 19 complaince to LG7 guidelines. System consumption should be 18W LED fixture with lumen package of 2400 lumens. The luminaire shall be wired with PVC unsheathed copper leads from terminal to the fitting etc., complete complying with standard specification and as directed by ELCOT Officers. Make: Crompton, Philips.

Supply and fixing of 3 nos.6A two module socket, 2 nos. 6A one module switch with module cover plate (plastic) on suitable Modular and Sturdy Popup Box in flush with with table with earth connections. The rate is inclusive of cutting the table of required size and fixing the box in table top finished level etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 2 nos.6A two module socket, 1 nos. USB, 1no. USB, 1 No. HDMI, 1 No. VGA, 2 No.s LAN and Audio Jack with module cover plate (plastic) on suitable Modular and Sturdy Popup Box in flush with with table with earth connections. The rate is inclusive of cutting the table of required size and fixing the box in table top finished level etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Fixing of Cable Management with Cover, Divider end cap and joint accessories for Conference Table etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Laying of Cable management Snake Spine to prevent cluttered cables which shall be Simple & Attractive solution to carry cables from floor to desk. It shall be ideal for Cabin Workstations and Easy to fit & will keep your under desk cables neat and tidy. The Spine shall be Large solid base for extra stability etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply, Installation, testing and Commissioning of HDMI Splitter 1 in 4 Out, 1x4 HDMI Splitter Support 4K@60Hz Full HD 1080P.1x4 HDMI splitter distributes audio and video signals from one signal source to 4 HDMI displays at the same time, providing with high-quality video/audio without lag, flicker, resolution situation of decline etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply, Installation, testing and Commissioning of Transmitter and receiver for Converting HDMI to Cat 6 and Vise versa.The Extender shall achieve long- distance signal transmission. Support Point-to- Point, Multi-receiver cascade- Connect your HDMI source device (to the Transmitter, utilize existing Ethernet structure in your house/office to connect the transmitter to Receiver, then connect your HDTV from a remote location to the Receiver with an HDMI cable.Vibrant video & Authentic audio - Supports 4K/1080p/720p/576p/576i/480p etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and laying of 15mtr HDMI Cable Lead 1.4V High Speed Ethernet Full HD 1080p High Speed Data 18Gbps HDMI Cable for transmitting video and audio signals from source to display etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 1no.6A two module socket , 1 no. 6/16A two module socket, 1 no. 6A one module switch, 1 no.16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 1 no.6/16A two module socket , 1 no. 16A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections. Higher End etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 3nos.6A two module 5 pin socket , 3 nos. 6A one module switch with module cover plate (plastic) on suitable module concealed Box (GI ) in flush with wall with connections etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and clamping of 3c x 2.5 Sq.mm PVC insulated SC sheathed flexible copper cable of 1100v grade in suitable PVC Conduit in Floor, wall and Ceiling with connected Saddles and accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and clamping of 3c x 1.5 Sq.mm PVC insulated SC sheathed flexible copper cable of 1100v grade in suitable PVC Conduit in Floor, wall and Ceiling with connected Saddles and accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Laying of Empty 25mm PVC Conduit Supply and laying of 2mm thick Empty PVC Conduits concealed (or) open in wall/ ceiling/ false ceiling etc. with necessary accessories clamps,screws etc etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of ELCOT Backlit signage - Acrylic signage with LED backlighting and necessary screws and fittings etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Fixing of Decorative lights for Lobby and Officers Cabin. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and laying of NW 240V LED Strip light in a suitable profile along with its drive and allied accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, fabricating, erecting of galvanised sheet steel, 14SWG thick Junction boxes with Top cover and other assciated accessories.The Junction boxes shall be flush with the floor etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of AC / DC 76mm buzzer / call bell suitable for 230 volts 50 c/s single phase AC supply on suitable metal box with push switch etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 1200mm (48") sweep BLDC Motor fan with remote with 1metre down rod with fan clamp with side plates and cross arm of size 450mm (18") etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Installation of 4MP IP Dome Camera etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Installation of 16 Channel NVR etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Installation of 6TB HDD etc., complete complying with standard specification and as directed by ELCOT Officers.

End to End testing & Commissioning charges for voice and data point etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 22U Rack with accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Caller ID Telephone Beetel M-71 etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Fanvil X301 IP Phone etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Installation of 1+1 Beetel M-88 etc., complete complying with standard specification and as directed by ELCOT Officers.

HDMI range extender 100 meter etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 24-Port Gigabit PoE Network Switch, for powering PoE-enabled devices such as Camera, Access Points and IP phones. (Make: Dlink) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 10 Horizontal Cable Manager with D-Rings, for organized cable routing within the rack etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Cat6 UTP Patch Cord (1 meter) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Cat6 UTP Patch Cord (3 meter) etc., complete complying with standard specification and as directed by ELCOT Officers.

Patch Panel Termination (Crimping), Cable Dressing, and Structured Labeling etc., complete complying with standard specification and as directed by ELCOT Officers.

Dual IO Box (Make: Dlink)- Including supply of faceplate (2gang), 2 IO modules, Back box, terminal blocks, cable termination, crimping, installation & testing etc., complete complying with standard specification and as directed by ELCOT Officers.

Single 10 Box (Make: Dlink)- Including supply of faceplate (1 gang), 1 10 module, back box, terminal blocks, cable termination, crimping, installation & testing etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Installation of High-Performance Indoor Wi-Fi 6 Access Point, dual-band, suitable for enterprise-grade wireless coverage. (Make: Grandstream) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Laying of Cat6 Cable along with PVC conduits and necessary accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Laying of DTH (TV Cable) along with PVC conduits and necessary accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 4U Rack with accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and installation of additional power manager etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and installation of PVC Cable manager etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 48-Port Gigabit Smart Managed Switch, Suitable for high-speed LAN connectivity (Make: Dlink) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 24-Port CAT6 Patch Panel, fully loaded, suitable for structured cabling installations and rack mounting etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 1U Horizontal Cable Manager with D-Rings, for organized cable routing within the rack etc., complete complying with standard specification and as directed by ELCOT Officers.

Patch Panel Termination (Crimping), Cable Dressing, and Structured Labeling for Data Patch Panels and Switch Ports etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply, Installation, Commissioning, and Testing of VPN Router with BSNL SIP Configuration with SoftEther VPN Client etc., complete complying with standard specification and as directed by ELCOT Officers. Make: TELEMATICS Model: TX-101 System Features 128MB RAM 64MB flash ROM Supply Soft Ether VPN Portable Mini WIFI Router

Supplying and fixing of name boards on the door etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of Suspended pendent lights etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 12 way single pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1no. 32A DP MCB switch as incoming and 10 nos. 6A to 32A SP MCB as outgoing in flush with wall with earth connection only. Higher End etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 7 segment 8way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and separate 4 way provision for accommodating one no. 63A 4 pole incoming MCB / Isolator and another separate 4 way provision for accommodating one no. 63A 4pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and separate provision for 6A to 32A SP MCB-24Nos / Isolators (totally 24 nos.) for sub incomers in 3 nos 63A DP MCB segments with label holder and provision for taking up cable for size not less than 35 sq.mm with the following on wall with earth connection only etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Clamping of 3 1/2 core x 35 Sq.mm PVC armoured LTUG aluminium cable on post or on wall MS-clamps, saddles, plugs, screws etc., complete including transport charges of UG cable etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of brass cable gland for 3-1/2 x 25 sq.mm. PVC armoured LTUG cable with earth connection etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and providing cable end termination of 3-1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and erection of GI Hot Dip / Powder Coated 16 SWG Perforated type Cable Tray with 150mm width and 50mm height with all the fixing accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with Module GI switch box in flush wall with 6A one way module switch with module front plate with painting of Suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) (6 points / Coil) Higher End - (Primary) etc., complete complying with standard specification and as directed by ELCOT Officers.

Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS FRLS copper conductor of 1100 V grade in suitable heavy gauge MS conduit pipe on wall and ceiling with MS accessories with continuous earth wire connection of 1.5 sq.mm copper wire for Open MS conduit Light point / fan point (for electronic regulator) (6 points / Coil) Higher End - (Secondary) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, installing, testing and commissioning of Addressable one loop fire alarm control panel etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, installing, testing and commissioning of Addressable Manual Call Point with back box (break glass type), junction box and other accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, installing, testing and commissioning of Analogue Addressable fire alarm Sounder with strobe light, junction box and all accessories etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, installing, testing and commissioning of photo electric (optical) smoke detector with base, junction box and other accessories (Above false ceiling & true ceiling) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, installing, testing and commissioning of Analogue Addressable Monitor Module (single input module) for integrating etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying, installing, testing and commissioning of 2C x 1.5 mm², armoured, single stand, outer sheathed, FRLS, PVC insulated copper conductor cable confirming to specified IS standards (for MCP, hooters, modules and from power supply unit & control module) etc., complete complying with standard specification and as directed by ELCOT Officers.

Analogue addressable Manual pull/call points etc., complete complying with standard specification and as directed by ELCOT Officers.

Analogue addressable Control modules etc., complete complying with standard specification and as directed by ELCOT Officers.

Analogue addressable Monitor Modules etc., complete complying with standard specification and as directed by ELCOT Officers.

Analogue addressable Short circuit isolators etc., complete complying with standard specification and as directed by ELCOT Officers.

Analogue addressable Loop sounders with strobe (or) ordinary loop sounders with control modules.The cost of Control Module to be included etc., complete complying with standard specification and as directed by ELCOT Officers.

Response Indicators etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply testing,commissioning of Centrifugual Duct Inline 350CFM Exhaust air unit complete with double skin insulated puf panels, pre cast vertical and horizontal frame sections, fan section, two speed EFF -1 rated motors,filter section,drive package. EA Unit door interlock limit switch, etc. FA Unit to be supplied with matching flanges for mouth connection etc., complete complying with standard specification and as directed by ELCOT Officers. Fan Make:- Kruger/Caryair/Ostberg / Elta fans

22 G up to 751 to 1500mm

24 G Up to 750mm

Supply & fixing of Extruded Aluminium powder coated Supply air square diffuser of the following size with G.I Plenum(24G) of Following Diffuser size . The diffuser shall be mounted in the GI plenum box , the inlet connector suitable for flexible duct size, including necessary GI Screw, Bolt, nut & supports. The diffuser Neck size should be suitable for CFM as per GFC drg etc., complete complying with standard specification and as directed by ELCOT Officers.

225mmX225mm

300mmX300mm

Supply & fixing - Extruded Aluminimum powder coated Supply air grills with VCD with necessary GI Screw, bolt, nut & supports. ( colour for the grill to be confirmed by Engineer in charge) The Grill plenum should be fixed to the false ceiling using 4inch tap (Water proof PE coated fabric Tap withy thick of 0.26mm+/- 10%) to ensure Zero leakage before fixing grilles at false ceiling etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply & fixing - Extruded Aluminimum powder coated Return air grills without VCD with necessary GI Screw, bolt, nut & supports. ( colour for the grill to b conifremed by Arch/ PMC team before placing the order) etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of multiblade Opposed type Volume control damper constructed out of 18G GI damper with suitable links,and nylon bearings with quadrants and levers for manual control of volume flow of air for proper distribution and balancing of the system with lever locking facility, including necessary GI Bolt, nuts & washers etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply Fabrication and erection of Double canvas connection made out of fire retardent canvas cloth with Zip required necessary fixing arrangements including nuts & bolts etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply & fixing of Thermal insulation for supply air duct using 9mm thick class " O " Closed cell nitrile rubber based elastomeric insulation with the density of 40 - 55 kg /m³ . The insulation manafactured as per BS 476 Part 7test & which should also meet UL94 supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM D 1056), should not support microbial growth (ASTM D2180, G21, G22) and should not emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.033W/m.k @ 0deg C as per DIN EN 12667. and water vapor permeance of 0.10. Joints should be sealed with 50 mm wide 3 mm thick self adhesive tape (Black Cotton Tape not acceptable). Adhesive shall be used additionally with VOC level not exceeding 50 grms / Litre etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply & fixing of Acoustic insulation for Supply air duct using 10 mm thick class 1 rating Open cell nitrile rubber elastomeric insulation with density of 140 - 180 kg / m³. The insulation manafactured as per BS 476 Part 7 & which should also meet UL 94test supplementary materials for air distribution system which should not absorbs less 0.2% water by volume (ASTM c 209), should not support microbial growth (ASTM 2180, G21, G22) and should not emit objectionable odors (ASTM C 665) and should have thermal conductivity of 0.04W/m K @ 20 degC as per DIN EN 12667. and water vapor permeance of 0.10. Adhesive shall be used additionally with VOC level not exceeding 50 grms / Litre etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Chairman Unit Mic for Conference Room etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Delegate Unit Mic for Conference Room etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of Conference Controller for Conference Room etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of PA Mixer Amplifier 240W for Conference Room

Supply of Wall Speaker 30W etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 2 core 1.5 Sq.mm Shielded Copper Speaker Wire etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 8 core 1.5 Sq.mm PVC Conference Cable etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply of 8 Pin Conferenec Mic Socket with modular box and front plate etc., complete complying with standard specification and as directed by ELCOT Officers.

Installation, Testing and commissioning 8 Pin Conference Mic Socket with modular box and front plate etc., complete complying with standard specification and as directed by ELCOT Officers.

Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth etc., complete complying with standard specification and as directed by ELCOT Officers. Earth pit with necessary 8 SWG copper were conductor

Civil Work

Supplying, laying and jointing various dia CPVC pipes of approved quality and best variety with ISI mark including fixing to the wall with special MS clamps, providing leak proof joints and giving connection to the PVC specials, dismantling the brick masonry / RCC floor or roof slab ad redoing the disturbed portions to the origianl condition etc., complete complying with standard specification and as directed by ELCOT Officers. (CPVC pipes should be got approved by the Engineer in charge before use on works).

Brick partition walls of 11.50cm thickness using best quality II class Ground moulded chamber burnt bricks of size 9" x 4-3/8" x 2-3/4" in Cement Mortar 1:3 (One Cement and Three Sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately) etc., complete complying with standard specification and as directed by ELCOT Officers

Plastering with Cement Mortar 1:5 (One cement and Five sand), 12mm thick in all floors including curing etc., complete complying with standard specification and as directed by ELCOT Officers.

Dadooing walls with size 150 mm x 150 mm x 6 mm approved quality, white / colour glazed tiles of following sizes set in Cement Mortar 1:2 (One Cement and Two sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification and as directed by the ELCOT officers.

Cement Concrete 1:4:8 (One Cement, Four sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc., complete complying with standard specification and as directed by ELCOT Officers.

Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 part I to IV in stages to suit the progress of work consist as per the detailed specification as below. Including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the ELCOT officers.

Paving the floor with best quality Vertified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supply and fixing of Fine Ceramic Wall Hung Wash basin (excluding RCC slab and marble/granite), fixing the same to perfect level, grouting to adjusting surfaces with water proofing materials, cutting walls or RCC slab, restoring the same to their original conditions including supplying and fixing suitable fabricated bracket using mild steel plate, testing and commissioning, etc., complete complying with standard specification and as directed by ELCOT Officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position of 2 in 1 Bib cock with health Faucet of approved make confirming to IS specification and quality including cost of shellac, thread etc., complete complying with standard specification and including cutting and threading wherever necessary the quality of tap should be got approved by the Executive Engineer before use on work.

Supplying and fixing of Washbasin waste hose for Washbasin etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying and Fixing of Connection Hose for Wash Basin & Closet etc., complete complying with standard specification and as directed by ELCOT Officers.

Painting two coats of newly plastered wall surface with ready mixed plastic emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of Roller Blinds for Windows. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of Curtains. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of walls etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and fixing of 5.5 ft Artificial Plants in Ceramic Pots etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and Installation of open Cell Ceiling System using 15mm Aluminium Grid System With Aluminium 100X100 mm module open cell Ceiling Standard Colour power Coated With Complete Accessories towards the installation etc., complete complying with standard specification and as directed by ELCOT Officers.

Providing and fixing of 10mm thick Calcium silicate board partition over a GI Framework on both sides along with installation of Acoustic insulation with glass wool of 50mm x 16kg density which is fire retardant, bio-soluble and non-combustible and finished neatly with 48mm wide fibre mesh, jointing compound, two coat of putty, one coat of primer and 2 coats of ACE White colour paint. The rate is inclusive of necessary hardwares, Calcium silicate boards, labour charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying and fixing full height partition with Fixed 8mm toughened clear Glass fixed within 2"x2" aluminium section of brand Hindalco, Alcoa or Jindal fixed in the Floor Level and fixed in the Roof Ceiling the framework shall be placed the framework shall be placed along the top and bottom of the glass with vertical members every 4' as per site condition.The 12mm clear glass to be fixed with necessary hardware and rubber beading to match powder coated metal on both sides of the glass . Aluminium framework to be powder coated in black colour etc., complete complying with standard specification and as directed by ELCOT Officers.

Shifting and fixing of 7.6' high glass doors in aluminium partition with Saint Gobain 8mm toughened clear Glass fixed within 2.5"x2" aluminium section fixed in the Floor Level, clear glass to be fixed with necessary hardware and rubber beading to match powder coated metal on both sides of the glass. Aluminium framework to be powder coated in black colour. Glass to be covered in frosted design. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying of Conference Table with 36mm thick laminated table top with necessary wire management system under table top. Table legs to be made in flexiply with laminate finish as per design with an access panel to access wire manager as per drawings. Overall size - 18'(l) x 6'(w) x 2'6"(ht) for 15 people. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying of Stone top coffee table with powder coated metal legs as per design. Size - 4'(l) x 2'(w) x 1'4" (ht).Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Sofa set - 3 + 1 sofa set - Supplying of Sofas as per design with velvet/leatherette fabric upholstery on back and seat. Seat made of minimum 28 density foam and back made of microfiber or 32 density foam. Legs in SS. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers. 3 seater size 7' x 2'6" 1 seater size - 2'8" x 2'6"

Supply & fixing of Table Size - 6'(w)x2.8'(d)x3'(h) with top made of 25mm thick pre laminated particle board with 2mm edge lipping finish,.Below the table top 18mm thick Modesty pre laminated particle board is provided. Above table top flip cable manager is Provided . Side storage : Made of 18mm Thick particle board side, with one drawer and one shutter with shelf inside in laminate finish. Side table unit is equipped with wire manager. Made of ply and laminate, solid wood edge band brass effect PU. The rate should included debris clearing, Materials lead and lift, cleaning, etc. complete as per drawing. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying and fixing Entrance Flush Door (4.0' x 7.5') single leaf 32/30mm thickness both side commercial ply in laminate finish T.W.frames of size 100x75mm at side verticals and 3Nos.of butt hinges 125mm long including wind appliances furniture iron fittings 2Nos.of iron pad lock 15cm long for locking arrangements and fixed in position as directed during execution. The door shall have center glass to have 2" decorative Teak wood moulding cornice with duco paint finish. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying and fixing TV ledge Box with 19mm thick pre laminated particle board table top of cabinet depth - 1.0' with 2mm edge lipping finish fixed to the wall.The rate should included debris clearing, Materials lead and lift, cleaning , etc. complete. Rate includes all materials, labour charges, transportation and lifting charges etc., complete complying with standard specification and as directed by ELCOT Officers.

Supplying & placing Rolling chairs of Mesh chair of Medium Mesh Back Chair, Cushioned Seat, Adjustable Lumbar Support, Gaslift, Synchro Mechanism, Adjustable Arms, Nylon Base. The rate should include Materials lead and lift, cleaning etc., complete complying with standard specification and as directed by ELCOT Officers.

Workstation made up with 50x50mm MS Pipe Powder Quoted and top made up with 25mm Pre laminated particle board with 2mm Edge tape machine moulded and under table race way for cables passing and top divider with aluminum frame with one pin board and one marker board Sizes 1200x600x750 and Divider 300mm, etc., complete complying with standard specification and as directed by ELCOT Officers.

Providing and fixing Draw Padestal of 3 drawer with single door with one lock for drawer with using of 18 min prelam partical board Size (410x450x650), etc., complete complying with standard specification and as directed by ELCOT Officers.

Supply and laying of Dark grey carpet flooring with 4mm loop pile plain construction, Polypropelene yarn with Woven Polyproylene primary backing and action back secondary backing, permanent static control. The Carpet Shall be laid over a floor protection sheet. The rate is inclusive of all the handling charges, etc., complete complying with standard specification and as directed by ELCOT Officers.