Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.0 LAccepted-AOC HIMACHAL BUILDING SHOP NO 10 CD BARFYWALA ROAD JUHU LANE ANDHERI W MUMBAI 400058 | MUMBAI SUBURBAN | MAHARASHTRA | 400058 | ₹17.0 L | L1 | Accepted-AOC Being L1. |
| 2 | L2₹17.6 L+₹53,824.08 (3.16%)Rejected-AOC 51 212D 3E K V NAGAR NEAR ADARSH NAGAR KHERIA MOD AGRA UP 282001 | AGRA | UTTAR PRADESH | 282001 | ₹17.6 L+₹53,824.08 (3.16%) | L2 | Rejected-AOC Not being L1. |
| 3 | L3₹19.5 L+₹2.5 L (14.5%)Rejected-AOC RADHA NIKUNJ L 2 SOUTH CIVIL LINES ROORKEE HARIDWAR UTTARAKHAND 247667 | ROORKEE | HARIDWAR | UTTARAKHAND | 247667 | ₹19.5 L+₹2.5 L (14.5%) | L3 | Rejected-AOC Not being L1. |
| 4 | L4₹19.9 L+₹2.9 L (16.8%)Rejected-AOC | ₹19.9 L+₹2.9 L (16.8%) | L4 | Rejected-AOC Not being L1. |
| 5 | L5₹20.4 L+₹3.3 L (19.6%)Rejected-AOC 340 11 M S NATIONAL ENGINEERING CORP 340 11 SATTI STREET ROORKEE ROORKEE HARIDWAR UTTARAKHAND 247667 | HARIDWAR | UTTARAKHAND | 247667 | ₹20.4 L+₹3.3 L (19.6%) | L5 | Rejected-AOC Not being L1. |
| Sl No | Description | Qty | Unit | Ishtiaq and Sons L4 | U k Enterprises L7 | NATIONAL ENGINEERING CORPORATION L5 | MAYUR ELECTRIC SERVICES L6 | HIGH HILLS INFRA L9 | EX SOLDIERS MECHANICAL WORKS L3 | SETHI BROTHERS L2 | S and G Constructions L10 | PAVANI INFRAS L12 | PAUL REFRIGERATION L11 | M/s PIONEER CONTRACTORS L1 | SONA LAKSHMI ASSOCIATE L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, install, testing and commissioning of galvanized steel 12.5 m motorised high mast shaft in two sections made from H. T steel of grade BSEN10025, S355J0, internally and externally hot dip galvanised with average 70 microns, designed for 39m/sec wind speed (as per IS875), 3mm section thickness, top dia 150mm, bottom dia 340mm, with raising lowering system comprising, head frame, luminaries carrying suitable to install 6 Nos LED luminaries in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual, handle, junction box all as specified including foundation bolts & nuts, washer plate and common template etc. as per manufacturer recommendation with & including following accessories: | 2 | EACH JOB | 2,50,000 ₹5,00,000 Lowest | 3,25,000 ₹6,50,000 | 3,00,000 ₹6,00,000 | 4,36,461 ₹8,72,922 | 3,90,000 ₹7,80,000 | 3,95,000 ₹7,90,000 | 2,50,000 ₹5,00,000 Lowest | 4,30,000 ₹8,60,000 | 3,32,000 ₹6,64,000 | 4,00,000 ₹8,00,000 | 3,06,000 ₹6,12,000 | 3,50,000 ₹7,00,000 |
| 1.01(i) Single dome aviation obstruction LED lamp - 01 No (ii) Supply and fixing double door MS feeder pillar box 01 in vicinity of each tower - 01 No. (iii) Construction of suitable shallow foundation with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capacity at site as 10T/Sqm. Size of foundation as per manufacturer's specification including necessary earth work excavation in any type of strata - 01 No (iv) Provide the following component (switching accessories), inside the feeder pillar including internal wiring all. Complete for automatic, timely OFF/ON for operating of (6 to 8 Nos) 150 W LED light fittings for each high mast light pole: (a) 63A 4 Pole MCB isolator - 1 No (b) 240V Contractor - 01 No (c) Day dial timer (GIC) - 01 No (d) By pass switch - 01 No (e) Outlet Terminal - 02 Nos (incoming and outgoing cable including necessary PCC of suitable size for complete. (f) Starter for motor operation (Forward and Reverse direction) - 01 No | |||||||||||||||
| 1.02(v) An adequate door opening shall be provided at the base of the mast. The opening is such that it permits clear access to equipment's like winch, cable, wire rope, plug & socket etc. and also facilities easy removal of the winch for servicing. The door opening is complete with a close fitting vandal resistant Allen key locking with provision for external lock. The door opening is carefully designed and reinforced with adequate steel section so that the mast section at the base is unaffected, and undue buckling of the cut portion is prevented under heavy wind condition. (vi) Mast structure is designed to sustain an assumed maximum reaction arising from wind speed as per IS 875 (Part 3) 1987 (three seconds) which is measured at a height of 10 mtrs above ground level. | |||||||||||||||
| 2.00 | Supply and fix LED flood light with IP 65 protection, front openable, sigma PC 150W model No LFSM-150-C-PC of orient with a robust pressure die cast aluminium housing and IP rated lens cover, ensuring uniform light distribution and more than 50% energy saving compared to conventional systems with provided all accessories required on site complete all as specified and as directed. | 12 | EACH | 6,200 ₹74,400 | 9,000 ₹1,08,000 | 5,400 ₹64,800 | 5,228 ₹62,736 | 10,000 ₹1,20,000 | 10,500 ₹1,26,000 | 6,575 ₹78,900 | 6,000 ₹72,000 | 7,200 ₹86,400 | 20,000 ₹2,40,000 | 3,780 ₹45,360 Lowest | 8,000 ₹96,000 |
| 3.00 | Material and labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric cables with stranded aluminium conductor of size 4core x 16sqmm, 1100 volt grade, laid in trenches/ through GI Pipe/ fixed along with pole structure etc. complete all as specified and as directed.
Note : Necessary earthwork, cable protection items shall be measured & paid separately under relevant items | 360 | RUNNING METRE | 300 ₹1,08,000 | 260 ₹93,600 | 350 ₹1,26,000 | 216 ₹77,760 | 400 ₹1,44,000 | 245 ₹88,200 | 345 ₹1,24,200 | 310 ₹1,11,600 | 650 ₹2,34,000 | 150 ₹54,000 Lowest | 207.9 ₹74,844 | 260 ₹93,600 |
| 4.00 | Material and labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric cables with stranded aluminium conductor of size 4core x 10sqmm, 1100 volt grade, laid in trenches/ through GI Pipe/ fixed along with pole structure etc. complete all as specified and as directed.
Note : Necessary earthwork, cable protection items shall be measured & paid separately under relevant items | 290 | RUNNING METRE | 300 ₹87,000 | 220 ₹63,800 | 320 ₹92,800 | 200 ₹58,000 | 350 ₹1,01,500 | 225 ₹65,250 | 305 ₹88,450 | 280 ₹81,200 | 600 ₹1,74,000 | 140 ₹40,600 Lowest | 153 ₹44,370 | 230 ₹66,700 |
| 5.00 | Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed. | 117 | CUBIC METRE | 600 ₹70,200 | 550 ₹64,350 | 100 ₹11,700 Lowest | 300 ₹35,100 | 300 ₹35,100 | 350 ₹40,950 | 200 ₹23,400 | 700 ₹81,900 | 650 ₹76,050 | 300 ₹35,100 | 360 ₹42,120 | 300 ₹35,100 |
| 6.00 | Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. | 69.58 | CUBIC METRE | 500 ₹34,790 | 140 ₹9,741.2 | 40 ₹2,783.2 Lowest | 50 ₹3,479 | 100 ₹6,958 | 120 ₹8,349.6 | 50 ₹3,479 | 70 ₹4,870.6 | 170 ₹11,828.6 | 100 ₹6,958 | 135 ₹9,393.3 | 80 ₹5,566.4 |
| 7.00 | Removing excavated material to distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above starting point etc. complete all as specified and as directed. | 47.42 | CUBIC METRE | 600 ₹28,452 | 150 ₹7,113 | 80 ₹3,793.6 | 50 ₹2,371 Lowest | 100 ₹4,742 | 120 ₹5,690.4 | 100 ₹4,742 | 80 ₹3,793.6 | 200 ₹9,484 | 150 ₹7,113 | 306 ₹14,510.52 | 80 ₹3,793.6 |
| 8.00 | Supply and spreading dry riddled sand (Excavated soil shall approved by GE) in trenches as cushioning to under ground cable on top and bottom of cable all as specified and directed.
Note: Only punned thickness will be measured and paid. | 42.12 | CUBIC METRE | 700 ₹29,484 Lowest | 3,000 ₹1,26,360 | 1,200 ₹50,544 | 1,200 ₹50,544 | 1,500 ₹63,180 | 999 ₹42,077.88 | 1,250 ₹52,650 | 1,400 ₹58,968 | 2,000 ₹84,240 | 1,500 ₹63,180 | 2,430 ₹1,02,351.6 | 2,000 ₹84,240 |
Tender Value
₹24 L
EMD Value
₹48,000
Closing Date
7 May 2026, 6:00 pmClosed
GE(I) CG Goa
Military Engineer Service, GE(I) CG Goa, HQ CG DHQ-11, Chicolna, PO Bogmalo, Goa-403 806
PROVISION OF HIGH MAST LIGHTS AT COAST GUARD STATION, GOA UNDER GE(I) CG GOA
2026_MES_760601_1
8637/GOA/E8
Open Tender
Civil Works
Item Rate
180 days
GE(I) CG Goa
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(I) CG Goa
₹48,000
23 Jun 2026
16 Apr 2026
14 May 2026
16 Apr 2026
7 May 2026
30 Apr 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Supply, install, testing and commissioning of galvanized steel 12.5 m motorised high mast shaft in two sections made from H. T steel of grade BSEN10025, S355J0, internally and externally hot dip galvanised with average 70 microns, designed for 39m/sec wind speed (as per IS875), 3mm section thickness, top dia 150mm, bottom dia 340mm, with raising lowering system comprising, head frame, luminaries carrying suitable to install 6 Nos LED luminaries in symmetrical arrangement, double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual, handle, junction box all as specified including foundation bolts & nuts, washer plate and common template etc. as per manufacturer recommendation with & including following accessories: | |||||
| 1.01 | (i) Single dome aviation obstruction LED lamp - 01 No
(ii) Supply and fixing double door MS feeder pillar box 01 in vicinity of each tower - 01 No.
(iii) Construction of suitable shallow foundation with 1:2:4 or M20 grade concrete for the high mast considering the safe soil bearing capacity at site as 10T/Sqm. Size of foundation as per manufacturer's specification including necessary earth work excavation in any type of strata - 01 No
(iv) Provide the following component (switching accessories), inside the feeder pillar including internal wiring all. Complete for automatic, timely OFF/ON for operating of (6 to 8 Nos) 150 W LED light fittings for each high mast light pole:
(a) 63A 4 Pole MCB isolator - 1 No
(b) 240V Contractor - 01 No
(c) Day dial timer (GIC) - 01 No
(d) By pass switch - 01 No
(e) Outlet Terminal - 02 Nos (incoming and outgoing cable including
necessary PCC of suitable size for complete.
(f) Starter for motor operation (Forward and Reverse direction) - 01 No | - | - | - | - |
| 1.02 | (v) An adequate door opening shall be provided at the base of the mast. The opening is such that it permits clear access to equipment's like winch, cable, wire rope, plug & socket etc. and also facilities easy removal of the winch for servicing. The door opening is complete with a close fitting vandal resistant Allen key locking with provision for external lock. The door opening is carefully designed and reinforced with adequate steel section so that the mast section at the base is unaffected, and undue buckling of the cut portion is prevented under heavy wind condition.
(vi) Mast structure is designed to sustain an assumed maximum reaction arising from wind speed as per IS 875 (Part 3) 1987 (three seconds) which is measured at a height of 10 mtrs above ground level. | - | - | - | - |
| 2Supply and fix LED flood light with IP 65 protection, front openable, sigma PC 150W model No LFSM-150-C-PC of orient with a robust pressure die cast aluminium housing and IP rated lens cover, ensuring uniform light distribution and more than 50% energy saving compared to conventional systems with provided all accessories required on site complete all as specified and as directed. | |||||
| 3Material and labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric cables with stranded aluminium conductor of size 4core x 16sqmm, 1100 volt grade, laid in trenches/ through GI Pipe/ fixed along with pole structure etc. complete all as specified and as directed. Note : Necessary earthwork, cable protection items shall be measured & paid separately under relevant items | |||||
| 4Material and labour for XLPE insulated, screened, PVC bedded, galvanised steel strip or wire, armoured, heavy duty electric cables with stranded aluminium conductor of size 4core x 10sqmm, 1100 volt grade, laid in trenches/ through GI Pipe/ fixed along with pole structure etc. complete all as specified and as directed. Note : Necessary earthwork, cable protection items shall be measured & paid separately under relevant items | |||||
| 5Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in hard/ dense soil complete all as specified and as directed. | |||||
| 6Returning, filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and as directed. | |||||
| 7Removing excavated material to distance not exceeding 50m and depositing where directed at a level not exceeding 1.50m above starting point etc. complete all as specified and as directed. | |||||
| 8Supply and spreading dry riddled sand (Excavated soil shall approved by GE) in trenches as cushioning to under ground cable on top and bottom of cable all as specified and directed. Note: Only punned thickness will be measured and paid. | |||||
stage.html
html • 0.08 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.42 MB
8637TENDERPAGES.pdf
Tender Documents • 0.75 MB
BOQ_851976.xls
BOQ • 1.96 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .