Augmentation of water supply scheme Gill Klaan Block Rampura District Bathinda Under 1a ii and JJM

Loading of unloading of earth for footpath.

Carriage of earth filling

Carriage of Surkhi, sand, bajri, ballast, stone, boulders, kankar, building rubbish Carriage of material excluding initial lead of 5 Km Jalalabad Sand (Av. Lead 130 Km) Up to 130 km

Ghaggar Sand & Bajri (Av. Lead 290 Km) Upto 290 Km

Earth work in excavation in foundations, trenches etc. in all kinds of soil where pick jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation.

Earth filling under floors with surplus soil or soil containing gravel or kanker up to 40% excavated from foundation.

Earth filling under floors with surplus ordinary soil or soil containing gravel or kankar upto 40% taken outside the premises in 15 cm layers including ramming, watering and consolidated lead upto 1000 meters.

Dismantling brick work tile masoniory or tile lining. Dismantling dry brick work.

Dismantling brick tile masonary or tile lining.

Dismantling Concrete or precast Concrete Reinforced Cement Concrete.

Removing doors and windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled. a) Doors of area 3 sqm and below.

b) window of area 3 sqm and below.

c) Clear story Window

Scrapping of old cement old plaster.

Cement concrete 1:8:16 with 40mm gauge stone aggregate using concrete mixer volumetric type.

Cement Concrete 1:2:4 with stone ballast or shingle using concrete mixer volumetric type.

Reinforcement cement concrete M-25 Mechanical batch mixed using batch type concreate mixer as per IS : 1791 and vibrator by needly vibrator but excluding steel reinforcement centering and shuttering in super structure.

Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded

First class burnt brick work laid in cement sand mortar 1:5 in foundation and plinth.

First Class burnt bricks work laid in cement sand mortar 1:5 in first storey upto 4 meters above plinth level.

115mm thick brick wall in 1:4 cement sand mortar

Terracing consiting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another laver of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg/sqm top of RCC slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing etc.

Providing and fixing cast iron 100mm dia, rain water pipe with screw and wooden plugs fixed on wall-face, including filling joints with spun yarn and cement mortar 1:2 excluding head and shoe etc.

Conglomerate floor 40mm cement concrete topping 1:2:4.

Conglomerete floor 40 mm thick CC 1:2:4 on 100 mm thick CC 1:8:16 & 100 mm sand of stone filling

Conglomerate floor 50mm thick cement concrete rate 1:2:4 on 100mm thick cement concrete 1:8:16 with stone aggregate 40mm gauge and 100mm fine Sand filling.

Dry brick on edge paving sand grouted over 50mm thick earth and mud plaster.

12.5 mm thick cement plaster 1:2

12.5 mm thick cement plaster 1:4 inside.

12.5mm thick cement plaster 1:5 on wall.

12.5 mm thick cement plaster 1:2 Cement rendering on plaster 1mm thick

Cement pointing 1:2 deep variety.

White Washing (3Coats)Qty. Inside Staff Quarter.

Finishing wall with cement based water soluble exterior paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Finishing walls with cement based water soluble exterior such as snowecem, robbiacem etc. on old work one coat to give an even shade

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Hollock wood, doors, shutter, windows, shutter including hinges, screws, chocks, cheats, stops, cords etc. complete fixed in position.

Chowkats of commercial hard wood such as golden champ confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops bolts for hold fasts etc. complete fixed in position. B) Single Rebate (60mm x 100mm)

Steel work fixed independently without connecting plates including cutting hoisting and fixing in position

Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span

Wrought iron and mild steel ladders, framed grills, grating etc. with ends of bars, riveted or welded or forged, framed window guards, barred iron doors, stair case, iron railing including cost of bolts and nuts or screws or welding rod, complete fixed in position.

Bolts and nuts of all sizes and length required

Cold twisted deformed (ribbed/ tor steel) Bars Fe 500 grade as per IS 1786-2008 for R.C.C. works, where not including in the complete rate of R.C.C. including bending, binding, and placing in position complete.

Supply & fixing of pressed steel frames (chowkats) consisting of 18 gauge thick steel sheet of the specified section (standard design latest) including iron lugs iron hinges, confirming to PWD specifications including bolts for fixing stops, lock etc. complete. a) Doors and windows frame of size 118 mm x 60 mm wide single rebate weighing 3.43 kg per meter

Brick lining 7.5cm thick in 1:3 cement sand mortar over 12.5 mm thick base plaster 1:6 over dressed sub-grade including laying, trenching and jointingof low density polyethylene. bone bond/zig-zag or other specified pattern On side slopes

115 mm thick brick on edge lining in herring bone bond/zig-zag or other specified pattern laid in 1:3 cement sand mortar over LDPE over 12.5 mm thick base plaster 1:6 over dressed sub grade including laying, trenching and jointing of low density polyethylene. on bed

Dismantling of Flexible Pavements (By Mechanical Means) Dismantling of flexible pavements thickness above 50mm by mechanical means and disposal of dismantled materials up to a lead of 1000 meters, stacking serviceable and unserviceable materials separately as per technical clause 202 of MORT&H specifications

Patch Work with Bituminous Macadam 50mm to 75mm thickness (Grading II) Providing and laying patch work with bituminous macadam 50mm to 75mm thick using crushed stone aggregates of specified grading premixed with bituminous binder VG-30 @ 3.4% in Continuous type hot mix plant, carriage of mixed material to site of work, laid after trimming the pot hole, removal of failed material, laying by suitable means and rolling with a smooth wheeled roller to match the adjoining surface complete as per technical clause 504 of MORT&H specifications

Providing, Stringing out, cutting, jointing and testing of CI Double flanged Pipes with casted flanged as IS : 7181 Class B (ISI marked with prior approval of Engineer-in-charge) and laying the same in trenches to correct alignment and gradients, jointed with nut bolts, rubber insertion fitted complete including all cartage. d) 150mm i/d pipe lines laid complete

Supplying and laying CI Specials as per IS : 1538 complete as desired by Engineer-in-charge conforming to ISI specification. C.I. specials upto 300mm i/d

Providing & fixing C.I / D.I. Flanged end, stem of SS ( AIS 1410) and Bronze (gunmetal) working parts Sluice Valves ISI marked 14846-2000, including jointing, testing & cost of Nut, Bolt & insertion sheet, all carriage complete ( with the approval of Engineer in-Charge). A) Class PN-1 as per ISI 80mm i/d =

P/F ISI marked non return valves flanged end class pn-1.0 as per IS:5312/2004 in pipe line including jointing and cost of nutt bolt etc. complete. 150mm i/d

Providing and laying, jointing, fixing, testing ISI marked G.I. Pipe (as per IS 1239) B-Class, perimum make such as (Jindal, Hisar) including cost of specials such as tees, bends, sockets elbow etc., cutting, threading and testing in trenches in the ground complete. 40mm i/d

Providing, fixing and jointing ISI marked Gun-metal peet valves (Heavy Pattern) as per IS:778 with hand wheels, on G.I. Pipe lines laid in the ground or inside buildings including all carriages complete. 40mm i/d Gun Metal peet valve heavy pattern.

Construction of masonary Sluice Valve Chamber complete in all respects as per standard drawing. Size 0.60 m. x 0.60 m.

Size 0.90 m. x 0.90 m.

Hand boring Horizontly for crossing of pipe under road or any other obstacle by using Auger/Bocki method.Including excavation , stringing and jointing of pipe upto 160mm complete

Supplying,fixing and testing at site Automatic electronic type water level indication system with gun metal float sensor and electrical cable suitable for three phase pump submersible / monoblock to be fixed on existing panel for OHSRs complete in all respects.

Providing and fixing S.S Pressure Gauge complete as required complete in all respects Dial dia mater 100mm calibration 0-16 kg

Proving & fixing R.C.C.manhole cover & frame 560mm i/d complete in all respects 560mm i/d

Providing & Fixing in position chinaware Indian Orisa water closet size 580mm of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern including cost of PVC long bend 32mm dia complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing & Fixing in position viteous chinaware white lavatory suites of approved make (to approval of Engineer-in-Charge) consisting of C.P. Brass waste 32mm dia with one C.P. Brass pillar tap complete in all respect. v) Size 560 x 430mm x 820mm

RECESSED CONDUIT PIPE WIRING SYSTEM WITH FLUSH PIANO TYPE SWITCHES: Wiring in PVC insulated copper conductor single core FRLS cable (ISI marked), 1100volts grade to be laid in heavy gauge welded conduit pipe 20 mm/25 mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes required for having electronic fan regulators (socket size), bell push, electronic buzzer, 3pin 6Amp., 3pin 16/20 Amp. Sockets and 6 Amp./16/20Amp. Swithces (flush piano type accessories) etc. and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., & including the cost of flush piano type switches/sockets, step type electronic fan regulator 100 watts, PVC connector (For Fan Box and Electronic Buzzer), PVC Bush, Steel Hooks, Circular Inspection Box (Recessed Type and Deep Type) conduit pipe & copper wire and other petty material etc. including the cost of cutting and filling up of chases:- Wiring fan point (With fan box)

Wiring light point

Wiring 6Amp. wall socket point

Wiring 16/20Amp. power plug control point

GALVANIZED IRON PIPES AND G.I EARTHIG: (xiii) Earthing with G.I. wire/ rope in G.I. pipe partly recessed and partly on surface complete with 150cm long 50mm dia. G.I.earth pipe (Cutting threads and 36 Nos.holes, 1cm dia. to make a mesh aroundthe GI Pipe) with G.I. reducing socket including erection of the same, 4.50 metre (14.76 feet) below ground level with 20Kg. charcoal & salt mixture etc., up to 8 metre in length a) Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm x 15mm (upto 8Metre in length) Earthing with 8 S.W.G. (4mm dia.) G.I. wire in 15mm dia G.I. pipe with G.I. reducing socket 50mm

Providing, Stringing out P . V. C Pipes ISI Marked as per ISI- 4985 (Premium Make or Equivalent) casting along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing including specials complete as per specifications and excavation of pipe line, minimum cover on pipe One meter(6kg/cm2 pressure) 63mm o/d

Silt Clearance from existing S & S tank and dispose off it upto lead 300 mtr.

Supplying and fixing 200mm i/d Galvanized iron sheet floating arm 3.42 mtr long including sluice valve, survivel bend, floating drum, extended rod with hand wheel brackets and guides complete in all respects as per Public Health standard

Providing & Fixing Electric fan & Regulator etc

Providing & Fixing Tube Light Fitting 40W X 1.20 M Long on wall etc

Providing & Fixing LED bulb

Model of Pressure Sand Filter Suitable for 6000 population in SAF 1500. Supplying, Installation, commissioning of Pressure sand filteration Plant capacity 20 cum and 30 cum with on uncleaning filter, Pressure sand filter plant should be designed & manufactured with good engineer practice to provide quality water of drinking grade as per standard given in DNIT for raw water anaylsis & treated water quality results, requires raw water pump sets with valves reputed make, inter connecting pipe line and valve electronic works, Tranport Charges, Pressure gauge,control panal switches etc. const. of steel shad for covering the plant with steel frame & fiber as suitable size & other related works as per Technically specifications and commissioning material including 3 month Operational & Maintinance complete in all respects to the satisfaction of engineer- in - charge. For 20 Cum Capacity

For 30 Cum Capacity

Proving & fixing CI T-Type Rose Ventilator.

Provision for Railing, Aluminum ladder.

Repair of Expension Joint. 150mm i/d

Repair of leakage of Domes (LS)

Paint for Vertical Pipes (LS)

Extra Labour for dismantling of WC & WHB. & unseen items.

Providing , installing,testing & commissioning of electrically centrifugel driven pump set capable of delivering 775 LPM against a head of 39.30 Mtr. along with electric panel board consisting of electrical appliances Such as automatic Star Delta Push Button or oil imersed starter , Main Switch,Voltmeter ,Ampere Meter , ELCB, Shunt Capacitor,Single Phase, preventer, indicating Lamps , Kit Kat etc including cost of Electronic over current relay complete in all respects. (Clear Water Pumping Set at Head Works) Motor with Pump Discharge 12.92 LPS or 775 LPM,

Panel Board

Provision for internal wiring for machinery with PVC insulated copper wire in PVC pipe.

Labour for making 3 No. holes & 1 No. cut in case of angle iron pickets.

Providing & fixing barbed wire fencing 3 ply rating with angle iron pickets with M.S. clips including labour for stretching of barbed wire & cost of clips.

Extra for fixing hold fast complete in all respects

Providing and fixing MS Hooks.

Provision for Painting/intallation of sign board

Providing , installing , testing & commissioning one No. Electronically actuated , Diaphragm Operated, Metering System, Chemical Dosing Chlorinator, suitable for delivering 0.5 to 6.0 Litres of Bleaching powder solution/ Sodium Hypo Solution per Hour under maximum delivery pressure up to 7 Kg /sqcm and suction lift not less than 1.5m , as per DWSS standard specifications.

Providing proposed water connection to house hold up to wall with providing laying jointing, testing GI pipe lines 15mm i/d=4.5 mtr. B-class as per CSR 28.36(A), with specials including cost of specials such as tees, bends, sockets, elbow etc. cutting, threading and testing in trenches in the ground and ISI marked 15mm i/d feffule as per IS : 2692 and 3" i/d clamp with C.I. bib cock 15mm i/d as per IS:210 with stainless steel spindle of approved make as per CSR 30.65(b) including ISI water meter reputed make complete job in all respect including cost of carriage.

Credit for old Dismantled Steel.

Credit for old Sluice Valve

Credit for old Sluice Valve

Operational & maintinance of water supply for 3 months after completion of works including cost of Alum Sodium Hypochloride etc. Excluding energy charge.