Maintenance of Public Health Services to Govt. Residential Houses (Type 11,12 and 13) Sector 27 and 28 Chandigarh (under mtc. booth Sector 27, U.T., Chandigarh) (2216 N.P (P) Mtc. and repair)

Brick work with common burnt clay F.P.S. (non modular) bricks of classdesignation 7.5 in foundation and plinth in:as per DSR 6.1

Cement mortar 1:4 (1 cement : 4 coarse sand) as per DSR 6.1.1

12 mm cement plaster finished with a floating coat of neat cement of mix : as per DSR 13.7

1:3 (1 cement: 3 fine sand) as per DSR 13.7.1

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting complete DSR 17.7

White Vitreous China Wash basin size 550x400 mm DSR 17.7.3

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS 13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making good DSR 17.10

Kitchen sink without drain board DSR 17.10.2

610x460 mm bowl depth 200 mm. DSR 17.10.2.2

Providing and fixing white vitreous chinaware closet squatting pan DSR 17.13

Orissa pattern W.C. pan of size 580 mm DSR 17.13.2

Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. DSR 17.15.1

Providing and fixing of C.P. brass Jet with brass nossel steel flange & PVC flexible pipe complete in all respect make DSR 17.16A

Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete DSR 17.19

10 litre ( flush) capacity-white DSR 17.19.1

Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete :DSR 17.20

White solid plastic seat with lid. DSR 17.20.1

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings as DSR 17.28

32 mm dia DSR 17.28.2.1

Providing and fixing of CP Brass/SS/ABS overhead shower with swiveling Joint , 125mm dia (min) with C.P Brass/ S.S Shower Arm and flange to the satsifaction of EIC of approved make ESSCO Model No. 536A & 542A or equialent Model of CERA /Kerovit/ Jal

Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good : DSR No. 17.60

100 mm inlet and 75 mm outlet Sand cast iron S&S as per IS: 3989 DSR 17.60.2.1

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good etc. As per 18.10

15 mm dia. nominal bore as per DSR 18.10.1

20 mm dia. nominal bore as per DSR 18.10.2

Providing and fixing of GM Peet valve complete in all respect DSR 18.17.1(A)

15mm dia

20mm dia DSR 18.17.1A

Providing and fixing uplasticised PVC connection pipe with brass unions : DSR 18.21

15mm nominal bore DSR 18.21.2.1

Providing & fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) DSR 18.46

15mm dia DSR 18.46.1

20mm dia DSR 18.46.2

Provd. & placing on terrace (at all floor levels) polye- thylene water storage tank, IS 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings complete DSR 18.48

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 DSR 18.49

15 mm nominal bore. DSR 18.49.1

Providing and fixing C.P. brass long body bib cock 15 mm dia DSR 18.51.1

Providing and fixing C.P. brass angle valve for basin mixer and geyser points ... DSR 18.53

15 mm nominal bore. DSR 18.53.1

Providing and fixing of C.P. extension nipple upto 1'' length. DSR 18.53A

Providing and fixing PTMT Ball cock of approved quality, colour and make complete DSR 18.62

15 mm nominal bore, DSR 18.62.1

20 mm nominal bore, DSR 18.62.2

Providing and fixing of CP waste complete

32 mm dia for WHB/Sink

Conversion for OWC to EWC with 4" C.I.H.R bend, 4" PVC collar 1 No 4" PVC pipe of 4kg pressure upto 1'-6" long including dismantling of OWC pan and floor and repair of flooring to its original complete in all respect .

Providing and fixing of C.P. Cup heavy duty

Providing and fixing of C.P. Steel Grating Heavy (With hole without hole) 100 mm dia, of approved make.

Providing and fixing of C.P. pillar cock of make

Providing and fixing of fitting for low level flushing cistern

Providing and fixing of looking mirror Bevelled Edge ( 22" x 16") complete in all respect

Providing and fixing of PVC handle for l/level cistern complete M/Cera make

Providing and fixing of PVC tank cover

500/300 ltr cap.

Providing and fixing of PVC ball cock for l/level cistern complete

Providing and fixing of CP/SS Long Bend for OWC

Supplying and fixing of RCC/SFRC Cover with frame for Gully Trap Complete of Approved make

Supplying and fixing in position pre-cast RCC/SFRC Cover with frame of quality MD-10 and size 450mm

Providing and fixing of CP Brass/SS/ABS Soap Tray made of Plastic including glass bowl of approved make Jal Model No. 36540 or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS Towel Rail 600mm of with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36520 Warna or equialent Model of CERA /Kerovit/ ESSCO

Providing and fixing of CP Brass/SS Towel Ring with screws etc. to the satsifaction of EIC of approved make Jal Model No. 36524 Warna or equialent Model of CERA /Kerovit/ ESSCO

Providing and laying of UPVC pipe, IS-4985 marked, Pressure 6 kg/cm2 including cutting, joining, solvent and all necessary fittings complete in all respect except excavation.

Providing and fixing of PVC Tee size 100mm x32mm complete in all respect.

Providing and fixing of Tank Nipple complete in all respect.

Const. of curb with C.C. 1:2:4 alongwith upto 1’-0” depth to make it water proof including Cost of sand, bajri

Providing and fixixng of CP Brass Spindle (Heavy Duty) for bib taps and Piller taps weight approx. 110 grms.

Please Enable Macros to View BoQ information