REPAIRS FLOOR JOINERY WALLPLASTER WS SANITARY FITTINGS OH TANKS PLUMBING WORK ETC MD ACCN FOR CIVILIAN QTRS OTHER THAN NAD CIVILIAN INCLUDING OTM ACCN IN CHUNNABHATTI AREA UNDER AGE BR I AT KARANJA

Amount

Supply and fixing in repairs 15mm bib cock brass chromium plate fancy type and as directed by Engineer Incharge

Supply and fixing in repairs 15mm stop cock chromium plated but fancy type 15 mm dia with crutch or butterfly handle, screwed down high pressure complete all as specified and directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type angle cock with long shank & cup (concealed type), complete all as specified and directed.

Supply and fixing in repairs 20 mm bore stop valves, caster copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iorn pipe or for unions and fixed completed all as specified.

S & F in repairs 15 mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe complete all as specified

Supply and fixing in repairs 15 mm bore Pillar cocks cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified

S&F in repair Spindle brass of 15mm dia for CP bib cock/pillar tap/wall mixer etc complete all as specified and directed.

S & F in repairs Brass chromium plated shower rose 100mm size with or without swivel joints incl CP brass arm, any size, including fixing to steel pipe or union 15 mm bore pipe complete all as specified.

S&F in Repair 32mm Waste pipe fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed completed all as specified.

S&F in Repair 40mm Waste pipe fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed completed all as specified.

S&F in Repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 32mm45gms) and fixed completed all as specified.

S&F in Repair Waste coupling of PTMT (half or full threaded) . (Minimum weight 40mm-60 gms) and fixed completed all as specified.

S & F PVC Connections 15 mm size with PTMT nuts of length 600 mm and fixed complete all as specified.

S & F PVC Connections 15 mm size with PTMT nuts of length 450 mm and fixed complete all as specified.

Chipping , removing carefullly concrete work by low impact hammer ,breakar without damaging the structure & cleaning and disposal of debries out side the premises etc. complete as directed by Engr-in-Charge. Hard concrete should not be removed by force.

M&L for Clean existing reinforcement with wire/ rotary wire brush, making the surfaces free from loose material dirt etc. complete and applying two coats of alkaline rust converting primer FEOVERT of Krishna Conchem or Roff rust cleaner of Piddilite or Dr. Fixit Rust removal or ShaliRust of STP Ltd. on the rebars, including cleaning the reinforcement, wirebrushing to remove loose rust spalls, wash the rebars with clean water within 3 min and wipe it dry.

M&L for applying two coats of Epoy based Zinc primer in a span of four hours over the treated rebars and allow to dry for six hours. The application shall be by brush. Epoxy primer for steel of make / brand - Corroseal-ZR of Krishna Conchem or Dr. Fixit Epoxy zinc primer

M&L for applying concrete protection coating on finished structural members exposed to atmosphere make or brand IPNET of Krishna Conchem or New Coat from Dr. Fixit complete all as specified and directed.

M&L for Drilling and fixing Rohibb Teflon nozzles in RCC members, including drilling holes of 12mm dia, 50 to 100mm deep holes. Works shall be carried out as under :- (i) Cleaning of holes. Clean the holes by air blower prior to fixing nozzles. (ii) Fixing of nozzles. Insert 12mm dia. Rohibb Teflon nozzles in cleaned holes. External end of nozzles to be machine to receive outlet of grouting gun.Fix it inside the holes by applying thixotropic epoxy putty to ensure complete sealing. Cure the system for min.12 hrs. (iii) Cutting of nozzles. Cut the nozzles by chisel after completion of grouting without damaging structural elements. (iv) In case crack upto 2mm wide, fix the injection nozzels directly over the cracks, at intervals of 6 to 9 inches, using a drilling machine. Fix PVC/MS nozzels in these holes with fast-setting epoxy putty & let it dry for 2 to 3 days. Also, seal the crack between the ports with epoxy putty. (v) In case where the crack is wider than 2mm upto 4 to 5mm, drill holes at the sides of the crack in a staggered fashion, at intervals of 6 inches and affix them with epoxy putty as mentioned above. (vi) Also, seal the face of the carck with a liberal application of the epoxy putty.

M&L for Injecting of site mixed cement slurry grout, mixed in specified proportion containing cement, sand water with addition of plasticizers (approved make) & migratory corrosion inhibitors, water cement ratio shall be varied between 0.5 to 1.0 for each hole, shrinkage compensating cement slurry mixed to a lump free fresh creamy consistency ,Mixing shall be done by mechanical mixer continuously stirring mechanically to keep cement particles in suspension. Injection of approved/specified grout by means of pump at a pressure of 3-5 Kg/cm2 etc complete till the grout mix flows out from the nozzle indicating complete filling of grout in the holes drilled. Make / brand of Epoxy grout - Dr. Fixit Epoxy injection or EPCO KP-HP-250 of M/s Krishna Conchem or Shaligrout EI of STP Ltd.

M&L for Injecting low viscosity (3-5cps) high molecular weight monomer by pressure and using mechanized injector gun with accessories till nozzles refuses to accept the grout, Including,Mixing of materialas:Mixing of material components(part a&b) in the required quantities as per manufacturer's instruction by weigh batching.Grouting:Fill the grouting gun with concrete penetrating corrosion inhibitor EPCO-KP-100/Protectsil CIT or Ferogard 903. Maintain desired pressure in the gun by air compressor; maintain the pressureat exit(2 to 3kg/cm2) by monitoring pressure guage at exit.Grout the material through prefixed nozzles in the structural elements@ 100ml per nozzle. Repeat the process for all the nozzles.

Replacement of Steel reinforcement with TMT bars of appropriate size where 30% of cross section is reduced including dismantling of rusted steel complete all as specified and directed.

M&L for cleaning all loose laitance on the concrete substrate and applying one coat of epoxy bonding agent on exposed concrete surface to ensure bond between old concrete & new concrete by brush application. Make / brand Monobond SBR of Krishna Conchem or Dr. Fixit epoxy bonding agent or Shalicrete URP of STP Ltd.

M&L for rendering minimum 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM of Krishnaconchem or polymer mortar HB of Dr. Fixit or Shalifix RM SG 01 of STP Ltd. 15% by weight of cement in one coat with and including curing as per manufacturer's instruction complete all as specified and as directed

M&L for Providing and applying water tight jacketing around columns with M20 grade micro concrete including all lifts, shuttering, drilling holes and fixing shear anchor as per specification complete. Make or brand Micro concrete of Dr. Fixit, Shalicrete URP of STP Ltd. , Epibond-21-LP, EPCO -KP-HP-250 of Krishna Conchem Note: Reinforcement shall be measured and paid separately.

S & F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor and fixed complete all as specified.

S & F in repairs Vitreous China wash down water closet pan (pedestal pattern), white including Plastic water closet seat, black, closed pattern with flat bottom, cover and mild steel chormium plated or aluminised hinging device and fixed complete all as specified.

S & F in repair Wash basins, vitreous China of size 550 x440mm(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or crecting stand and pvc connection 450 mm and 32mm Waste fitings brass chromium plated for glazed ware sinks basins etc with long screwed shanks and fly -nuts flange and beded in redlead cement and other end fixed.

S & F in repair Toilet paper holder box type of vitreous china fixed to walls with chromium plated (CP) brass screws and complete all as specified.

S & F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern and fixed all as specified.

S&F in repairs 40mm bore unplasticised PVC pipe of pressure rating 10 kgf/Sqcm fixed complete to walls, ceiling or laid in floors complete all as specified and directed.

Petty repairs to leakage of bib taps, pillar cock stopcock PVC connection waste pipes float valves, angle valve, concealed valve GI union joints of GI pipe Re-fixing of bottle trap etc by changing the PVC washers/Sheet washers or any other minor accessories etc complete all as specified and directed

Petty repair to high or low level flushing cistern by adjusting the float valve leaking of PVC connection, PVC bend including replacing of rubber washer check nuts plunger etc any type of flush all as directed

Renewing glazed or ceramic tiles in patches area not exceeding 5 Sqm including removing and cleaning old tiles preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed

S & F in repairs plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device and fixed all as specified.

S & F in repairs Stainless steel sinks with drainage board made of 1mm thick sheet for kitchen with plug washers and waste pipe, including bedding and cement mortar or fixing cast iron cantilever brackets and connecting unioncast iron cantilever brackets connecting union overall size 915mm x 460mm with bowl size 410mm x 330mm x 160mm and connecting union to waste pipe upto 0.5sqm each all as per specified and directed.

S & F in repairs Stainless Steel Kitchen Plate Rack 24 gauge thick sheet of overall size 31" x 36" x 10 " fixed with steel screws to wooden plug & grouted in CM 1:3 and fixed all as specified.(Make 'Prayag 348' or Equivalent)

S & F in repairs Looking Mirror 5 mm thick size 600 x 450 mm fixed on commercial ply wood 6 mm thick with PVC/wooden moulding beading fixed to wooden plugs with chromium plated brass screws and cup washers and fixed all as specified.

S & F in repairs PVC coated Mild steel curtain Rod Fancy type 20 mm Bore with incl brackets, stops, rollers etc. and fixed on wall. Complete all as specified and directed

S & F in repairs Tublar towel rail 24" long , 20 mm dia, stainless steel complete all as specified

S & F in repairs mirror cabinet in PTMT alloy Make 'Prayag' Cat No 551 or equivalent and fixed complete all as specified

S & F in repairs Jet spray(health faucet) with 1.50 m tube Make 'Prayag' Cat No 522 or equivalent for wash down water closet (pedestal pattern) and fixed complete all as specified

S&F in repairs Aluminium alloy wire cloth, 0.45mm nominal dia of wire & average width of aperture 1.40mm with aluminium wire staples fixed complete all as specified.

Supply and fixing in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified.

S & F in repairs 150 mm long Aluminium handles, cast type, anodised and fixed complete all as specified

S & F in repairs stainless steel Butt Hinges medium weight, cold rolled stainless steel 100 mm fixed to steel/wooden shutters complete all as specified

S & F in repairs stainless steel Butt Hinges medium weight, cold rolled stainless steel 75 mm fixed to steel/wooden shutters complete all as specified

S & F in repair 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified.

S & F in repair MS Rat tail pattern/ helicle doors spring 150 to 200mm, ordinary springs including roller and roller plate complete all as specified.

S & F in repair 100 mm long Hasp and Staple, safety type, aluminium anodised including bolt to hinge plate and fixed with screws and fixed complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads and fixed all as specified.

S & F in repairs 4 mm thick sheet glass, ordinary quality and glazing with oil putty in square of any size pane and fixed all as specified.

S & F in repairs 4 mm thick frosted glass, ordinary quality and glazing with oil putty in square of any size pane complete all as specified.

Taking down Chowkats or frames exc 1.5 sq m but not exc 4 sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F factory made 2nd class hard wood 35 mm thick Plain, framed, panelled shutters of factory made (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats complete all as specified and directed

S&F factory made 2nd class hardwood glazed and skelton shutters, 35mm thick, open rebated and prepared to receive glass, gauze etc with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mtred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, Clause 8.24 (a) and fitted to chowkats complete all as specified and directed

Taking down shutter of any description not exc 1 Sqm each complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed.

S&F factory made 2nd class hard wood 35mm thick glazed and skelton shutters ( factory made)of open rebated and prepared to recive glass, guaze etc (without sash bar)edges of framing plain chamfered or rounded fitted with cut and beads for securing glass, gauge etc size of shutters for Windows and ventilators, etc and fitted to chowkats complete all as specified and directed

S&F in second class hard wood plain, solid, straight chowkats & frames wrought framed rebated on the solid rounded or chamferred put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

M &L Cutting holes in brick walls, built in CM for inserting hold fasts and making good dismantled portion in CM 1:3 OR cement concrete 1:2:4 type B1 depth of embedded portion of hold fasts or lugs measured from the face of the jambs into the wall n'exc half brick. complete all as specified and directed

Taking down chowkats of frames with shutters (without taking off shutters from the frames)n exc 1.5.Sqm each complete all as specified and directed.

S & F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing SSR Part II 2010 complete all as specified and directed.

S & F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width struck in side with solvent cement for stiles and plain colour PVC sheet for top tail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement suppling and fixing the frame at site as in repairs all as per specification & drawings given in SSR 2010 Part II all as specified and directed.

S & F in repairs 19 mm thick block board grade-2 quality interior grade, commercial type for cupboard, almirah and shelves etc. incl taking down complete all as specified and directed.

Supply and fixing in repairs 18/19 mm thick particle board interior grade pre-laminated on one side and other side balancing white lamination in any position such as cup boards, drawers, shutters etcc., fixed with screws to timber frame work incl taking down complete all as specified and directed.

M&L IInd class hardwood exc 6 and nexc 13 sqcm plain fillets square, rectangular or triangular in section, clean sawn, chamfered or rounded on one edge or face, secured with nails and fixed complete all as specified.

S&F in repair 150mm dia Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified.

Supply only Jumper brass with rubber or leather washer complete for 20 mm dia stop cock brass all as specified.

Supply only Jumper brass with rubber or leather washer complete for 15 mm dia bib cock / stop cock brass all as specified.

Supply and fixing in repairs PTMT Ball valves 20 mm bore, high pressure with epoxy coated Aluminium rods & high density plastic ball screwed and fixed complete all as specified and directed.

S&F in repairs grating of CP brass 100 mm dia with or without waste hole fixed in repairs complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and directed.

Taking down cement plaster on brick or stone wall etc. including raking out joint, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M & L for rendering 20mm thick plaster in cement mortar (1:4) in two coats (15mm thick backing coat and 5 mm thick finishing coat) on fair faces of brick work or concrete surfaces mixed with WPC as per manufacturer’s instructions, but not less than 3% by weight of cement finished even and fair without using extra cement complete all as specified and directed.for buildings upto and including 4 storeys :- NOTE: WPC shall be measured and paid separately

M & L for rendering 15mm thick plaster in CM (1:6), on fair faces of brick work or concrete surfaces, finished the surfaces smooth, with using extra cement complete all as specified and directed.

M & L for rendering 5mm thick plaster in CM (1:3), on fair faces of ceiling surfaces, finished the surfaces even and smooth (without using extra cement), complete all as specified and directed.

M & L for rendering 10mm thick plaster in CM (1:3), on the top of chajjas, concrete surfaces, finished even and smooth (without using extra cement) and mixed with integral WPC as per manufactures instructions but not less than 3% by weight of cement complete all as specified and directed

M & L for preparation of newly plastered surfaces or previously untreated surfaces of ceiling and applying three coats of white wash on ceiling, complete all as specified and directed.

M & L for preparation of newly or untreated plastered surface applying two caots of oil bound distemper (OBD) over a coat primer complete all as specified and directed.

M & L preperation of newly plastered or previously untreated surfaces of wall and applying two coats of acrylic emulsion Exterior grade weather proof acrylic emulsion Antifungal and anti algea (Antifungal) paint over one coat of primer all as specified and directed

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing rubish off the premised out side M.D. land complete all as specified and directed.

S&F Coloured Non Skid coloured ceramic tiles 7 to 8mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick screed in CM(1:4) complete all as specified and directed.

S & F Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in CM 1:4to recieve tiles complete all as specified and directed.

S&F Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 20mm thick plaster in CM(1:4) complete all as specified and directed.

S&F in repairs Cast iron floor trap 75mm, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified

S&F in repairs for cast iron Nahani trap 100mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) all as specified all as specified

Taking down steel tubing and connections including clamps for refixing or removing to store etc 15mm dia pipe complete all as directed.

Taking down steel tubing and connections including clamps for refixing or removing to store etc 20 mm dia pipe complete all as directed.

S&F tubes 15mm dia medium grade galvanised(GI Tube) with all fittings and fixed complete to walls and ceiling or laid in floors 15mm bore all as specified.

S&F tubes 20mm dia medium grade galvanised(GI Tube) with all fittings and fixed complete to walls and ceiling or laid in floors 20 mm bore all as specified.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness below or above ground floors.complete all as specified and directed

M & L PCC (1:3:6) type C-2 using 40mm graded agg as in 75mm thick as in plinth protection/footpath. finished even & smooth using extra cement complete all as specified and directed

M & L PCC 1:2:4 type B-1 (20mm grded aggregate ) 40mm thick as in floor finished even & smooth using extra cement complete all as specified and directed

S & F in repairs 110 mm dia, PVC (SWR) single socketed rain water pipe in any length with rubber ring joints fixed to walls incl taking down complete all as specified and directed

S & F in repairs 110 mm dia, PVC bend complete all as specified and directed

S & F in repairs 110 mm dia PVC (SWR) shoe complete all as specified and directed

Dismantling of Asbestos cement (corrugated, semi corrugated, etc.) sheets as in roof coverings complete all as specified and directed.

S&F Pre-Painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F Pre-Painted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified.

S&F in repairs cast iron sand cast soil waste pipes in any length with or without ears with cement joints fixed to alls 100 mm dia incl taking down complete all as specified and directed

S&F in repairs cast iron sand cast soil waste pipes in any length with or without ears with cement joints fixed to alls 75 mm dia incl taking down complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness in floors aprons etc laid bedded and pointed in any mortar complete all as specified and as directed.

M&L Machine cut kota stone slab flooring 20-25mm thick over 15mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

S&F Polished kota stone/machine cut slab thick 20-25 mm thick machine cut in skirting / dado around window cill , jointing and pointing with white cement slurry including cutting and polishing and 15 mm thick backing coat in CM 1:4 complete all as specified and directed.

S & F Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 20mm thick screed bed in CM 1:6 to recieve tiles complete all as specified and directed.

S & F in repairs aluminium window/ventilator/door in lieu of wooden made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame and necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, Star lock, hooks & eyes peg stays, rubber beading and handles including connected items with and including, complete all as specified and directed. NOTE :(i) Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors. (ii) Rubber beading shall be measured and paid sepearately.

S&F 4mm thick plain sheet glass of ordinary quality for aluminium windows including rubber beading etc all as directed and specified.

S&F repairs aluminium anodised grill and frame of approved make and pattern of 10mm thick fixed including F frame for aluminium windows all as directed and all as specified.

S & F rubber beading suitable for fixing 4 mm / 5 mm thick glass in aluminium window/door etc all as specified and directed.

S&F in repairs star lock for window incl all necessary fittings complete all as specified and as directed.

Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar complete all as specified and as directed.

M & L brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM 1 : 6 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided complete all as specified and directed.

S & F Framed work such as grills, gratings,gate, open dran cover etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Mahadev Enterprises

M/s C S Construction Company

Everest Construction

INDIA ENGINEERS AND CONTRACTORS

SHABARICONSTRUCTIONS

Sagar Electricals