Provision of addition alteration to kitchen staff toilet and bathroom of CGOM and Provision of Oil Store General Purpose at South Hover Port and Provision of visitor room at south Hover Port at ICGS Mandapam under GE (I) (CG) Chennai

Amount

SCHEDULE A PART I BUILDINGS : (I) THE RATE QUOTED BY THE CONTRACTOR FOR THE PROVISIONAL ITEM NOS : 01 TO 188 CATERED BELOW ARE FOR THE PROVISION OF ADDITION/ALTERATION TO KITCHEN STAFF TOILET AND BATHROOM OF CGOM AND PROVISION OF OIL STORE (GENERAL PURPOSE) AT SOUTH HOVER PORT AND PROVISION OF VISITOR ROOM AT SOUTH HOVER PORT AT ICGS MANDAPAM UNDER GE(I)(CG) CHENNAI.. (II) THE DRAWINGS ENCLOSED ALONG WITH THE TENDER DOCUMENTS SHALL BE FOLLOWED FOR THE CONSTRUCTION OF ABOVE BUILDINGS.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed

Excavation in trenches. n. exc 1.5m wide & n.exc 1.5m in depth and n. exc 10 sqm on plan for foundation etc and getting out in soft/loose soil complete all as specified and as directed.

Removing surplus excavated soil to a distance n. exc 50 m and depositing at a level n. exc 1.5m above the starting point complete all as specified and directed .

Returning, filling in, including spreading, levelling, watering and well ramming in layers n. exc 25 cm thick in excavated soil complete all as specified and as directed

Material and labour for Plain Cement Concrete 1:4:8 type D-2 (using 40 mm graded aggregate) as in foundation filling , mass concrete etc complete all as specified and as directed.

Material and labour for RCC M30 Design Mix Concrete (using 20mm graded stone aggregate) as in foundations, including raft , footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete. complete all as specified and as directed.

Material and labour for RCC M-30 (Design mix) ( using 20 mm graded stone aggregate ) as in columns,pillars,piers, posts and struts complete all as specified and as directed

Material and labour for RCC M30 Design Mix Concrete (20mm graded stone aggregate) as in slabs supported on walls ,beams and columns in floors ,roofs,landings,canopies ,deck slab and in shelves etc complete all as specified and as directed

Material and Labour for Steel formwork to sides of concrete foundations, footings, bases of column, raft and raft beams,sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to batter in flat with rough finished surfacesof concrete complete all as specified and as directed

Material and labour for Steel formwork to sides of pillars, posts, struts, piers, columns etc complete all as specifed and as directed.

Material and Labour for Steel formwork to sides and soffits of roof beams/lintel beams,fascia and the like including edges with rough finished surfaces of concrete complete all as specifed and as directed

Material and labour for Steel formwork to soffits of suspended slab such as roof slab, floor slab, landings and similar work with rough finished surface of concrete complete all as specifed and as directed

Material and labour for corrosion resistant TMT bars 10 mm dia bar and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for corrosion resistant TMT bars 5 mm dia and over upto 10 mm dia as in stirrups,spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for Brick work withSub class B bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specifed and as directed

Material and labour for Brick work withSub class B bricks straight or curved on plan exceeding 6 M mean radius as in half brick thick wall, built in cement mortar 1:4 complete all as specifed and as directed

Material and labour for Rendering 10mm thick in CM 1:6 on fair faces of brick wall (Internal surfaces of wall) finished and even and smooth without using extra cement complete all as specified and as directed.

Material and labour for Rendering in CM 1:4 mixed with WPC as per manufacturers instructions ,15 mm thick on other than fair faces of brick work external wall surfaces finished even and smooth without using extra cement complete all as specified and as directed (Note:WPC will be measured separately)

Material and labour for Rendering 5 mm thick in CM 1:3 on soffits of ceiling ,concrete surfaces of Facia ,on top of chajja etc finished and even and smooth without using extra cement complete all as specified and as directed.

Supply only Liquid waterproofing compound (ISI Marked) Make : Impermo/Roff/Cico

Material and labour for Preparation of newly plastered wall surfaces including pilasters and cornices and applying two coat of distemper oil emulsion over a coat of alkali resistant primer complete all as specified and directed.

Material and labour for Preparation of newly plastered celing surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall etc by scrapping, broming down , washing with water and applying two coats of acrylic emulsion paint (weather coat) over a coat of water based primer complete all as specified and directed.

Material and labour for Treating the bottom and sides of excavation at the rate of 5 litres of emlusion per square meter of surface etc for ATT complete all as specified and as directed.

Material and labour for Treating the backfill in contact with foudnation at the rate of 7.5 litres of emlusion per square meter of vertical surface (area of substructure in contact with backfill to be measured) etc for ATT complete all as specified and as directed.

Material and labour for Treating the top surface of earth at rate of 5 litres of emlusion per square meter of surface etc for ATT complete all as specified and as directed.

Material and labour for Treating the soil under plinth protection at rate of 5 litres of emlusion per square meter of surface etc for ATT complete all as specified and as directed.

Material and labour for Treating the soil along with external perimeter of building at rate of 2.25 litres of emlusion per meter of the perimeter wall for ATT complete all as specified and as directed.

Material and labour for Joint Free Glazed coloured ceramic tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile not exc. 0.18 sqm as in Vertical surfaces such as dado/skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 ,10 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC Ç'channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing complete all as specified and as directed

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing complete all as specified and as directed.

Supply and fix Vitreous China water closet squatt pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including provision of lime concrete and making good to floor including PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories , fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to IWC and fixing of chain and pully or lever if any including flush pipe of chromium plated brass tube 32mm dia for low level cistern complete all as specified and as directed .

Supply and fix Bottle trap of PTMT 32 mm bore dia of discharge pipe of having minimum water seal of 25mm( Weight 260gms) complete all as specified and as directed.Make:Prayag/M/S Shakthi Industries

Supply and lay CPVC pipes 16 mm outer dia as per IS-15778 and plain CPVC fittings SDR-11 laid in trenches complete all as specified and as directed. Make: Astral/Ashirwad

Supply and lay CPVC pipes 20 mm outer dia as per IS-15778 and plain CPVC fittings SDR-11 laid in trenches complete all as specified and as directed. Make: Astral/Ashirwad

Supply and fix Fancy type chromium plated pillar tap, of 15 mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make: Prayag/ Cera/Hindware

Supply and fix Chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.Make: Prayag/ Cera/Hindware

Material and labour for Cast iron nahani trap 50 mm dia of outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Material and labour for Cast iron Floor trap 50 mm dia of outlet with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

Supply and fix Chromium plated health faucet 8 mm dia and 1000mm long flexible tube with wall hookcomplete all as specified and as directed.

Supply and fix 1000 litres capacity rotational moulded polyethylene water storage tank White coloured , Triple layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked with and including all fittings such as GI tank nipple etc complete all as specified and as directed.Make :Sintex/Polycon

Material and labour for Preparation of new wooden surfacesof any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix 20 mm bore dia Gun metal,globe or gate valve screwed down high pressure ,heavy duty with iron wheel head confirming to IS-778 class-I screwed both ends for iron pipe complete all as specified and as directed . Make- Leader/Kirloskar with ISI marked.

Supply and fix Brass chromium plated tubular towel rail 20 mm dia including fixing with brackets complete all as specified and as directed.

Supply and fix Soap dish brass chromium plated /vitreous china of approximate size 160mm X 160mm X 90mm fixed with and including chromium plated brass screws with wooden plugs complete all as specified and as directed

Supply and fix 15 mm dia bore stop /gate valve(fancy type), cast copper alloy screwed down high pressure, with crutch or butterfly handle screwed both ends fo iron pipe or for unions complete all as specified and as directed. Make:Jaquar/Metro

Supply and fix PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories ., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed. . Note:Make :M/S Parryware cat part no : C8090

Material and labour for Hard core of gauge n exc 63 mm graded crushed stone aggregate deposited spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and as directed

Material and labour for Plain cement concrete 1:3:6 type-C2 (40 mm graded aggregate) as in laying plinth protection including necessary form work complete all as specified and as directed.

Supply and fix Powder coated aluminium frame for doors, grills, windows, ventilators with one or more rebate including joining cleats, glazing clips rubber packing anodized alumnium snap beading screws etc complete all as specified and as directed. Note : (i) Minimum thickness of powder coating 50 microns.(ii) Make of aluminium frame: Jindal/Hindalco/Indal.

Supply and fix powder coated aluminium window and ventilator shutters ,sliding type without sash bar , aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing and aluminium anodised fittings such as Peg stay 150 mm long -01 no , handle 100 mm long 02 Nos in each door and hinges type B=21 -02 no , 100 mm long, anodized alumnium snap beading screws etc complete all as specified and as directed. Note : (i) Minimum thickness of powder coating 50 microns.(ii) Make of aluminium frame: Jindal/Hindalco/Indal

Supply and fix Plain sheet glass pane 5.00 mm thick ordinary quality and glazing with oil putty in squares n exc 0.5 sqm in each pane complete all as specified and as directed. Note :(i) Make of Glass : Saint gobain/Modi Guard/Gold Fish

Material and labour for Plain cement concrete 1:2:4 type- B2 (using 20 mm graded aggregate) ,40mm thick as in floor including necessary form work complete all as specified and as directed.

Material and labour for Plain cement concrete 1:4:8 type (using 40 mm graded aggregate) ,100 mm thick as in sub base of floor including necessary form work complete all as specified and as directed.

Material and labour for Clean sawn , Second class hard wood imber in scantling as in frame of door complete all as specified and as directed.

Supply and fix Factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc divided in to square (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Supply and fix Factory made 35 mm thick second class hard wood plain framed, panelled shutter (two panel) with lock rail with well seasoned wood fitted with panel of 9mm B.W.P. commerical ply or 12 mm thick venneered particle board with commerical veneering on both faces fitted to chowkats with rail and stile as per IS 1003 Part-1 kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:6 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Material and labour for virtified ceramic coloured tiles ,Premium quality 9 to10 mm thick (square/rectangular) area of each tile not exc. 0.36 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:6 , 15 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany

Material and labour for virtified ceramic coloured tiles ,Premium quality 9 to10 mm thick (square/rectangular) area of each tile not exc. 0.36 sqm in skirtings/dado etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 10 mm thick complete all as specified and as directed. Note :Make of Vitrified ceramic tile:Johnson/Khajaria/Somany

Supply and fix 150 mm long Aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed . Make:Crown/Adarsh/Atul

Supply and fix 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or entruded sections and fixing bolts and sliding bolts of extruded section of cast aluminium and fixed complete all as specified and as directed. Make:Crown/Adarsh/Atul

Supply and fix 100 mm size Butt hinges medium weight, cold, rolled mild steel complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 150 mm long Aluminium handles cast type anodised complete all as specified and as directed. Make:Crown/Adarsh/Atul

Supply and fix 300 mm long Brass ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix aluminium wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium steel wire staples to wooden frames complete al as specified and as directed . Make : M/S Nitin Industries , Chennai

Material and labour for Point wiring with 1.5 sqmm (Nominal area) unsheathed FRLS multi-stranded copper conductor PVC insulated cable 1100 volts grade single core drawn into and including non metallic rigid PVC conduit of 20 mm dia concealed along with FRLS 1.5 sqmm unsheathed multi stranded copper conductor cable PVC insulated 1100 volts grade as earth continuity conductor connected to common earth dolly fixed to wall/ ceiling roof and including 2mm thick terminal boxes MS sheet flush mounted with 3mm thick laminated hylem sheet fixed with camium plated iron screws for mountling switches, socket, fan regulators etc complete for one light point or one ceiling/ Exhaust/ wall fan point controlled by one switch and regulator complete all as specified and as directed. Note: Make of PVC copper conductor cable:- Finlex/Poly cab/ Asian. Make of PVC conduit /casing/capping : Avon plast/ Kon seal / Garware.

All as per Item No -68 here-in-before but one 3 pin 5 Amps switch socket on independent board all as directed.

All as per Item No -68 here-in-before but one 3 pin 5 Amps switch socket on same board along with other switches all as directed

All as per Item No -68 here-in-before but of size 2.5 sqmm copper conductor for 5 pin 5 Amps Switch socket outlet with 2.5 sqmm solid copper conductor as earth wire on independent board all as directed.

All as per Item No -68 here-in-before but of size 4.0 sqmm copper conductor for 3 pin 15 Amps Switch socket outlet with 4.0 sqmm solid copper conductor as earth wire on independent board all as directed.

Supply and fix LED light fitting 4 feet white, 20W, integrated LED driver etc. complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size. complete all as specified and as directed. Make:- Philps Cat Part No. BN021C LED20S PSU CDL GR or M/S Wipro Cat Part No D532065 20W-6500K

Supply and fix 5 Star rating ceiling fan 1200mm sweep suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor complete all as specified and as directed Make : Crompton/ Orient /Almonard/Bajaj

Supply and fix, 300mm Sweep Exhaust fan, metallic body with heavy duty motor,70W,1600m3/min air delivery, 1400 RPM rated speed with louver complete all as specified and as directed .Note Make of exhaust fan :Almonard /Khaitan

Material and labour for Cutting holes into or through brick walls built in cement mortar and making good surface in cement mortar 1 :3 including painting to match with the exisiting surface ocomplete all as specified and as directed.

Supply and fix Ceiling rose,surface type, terminals PVC / Polycarbonate of size 35mm X 50 mm, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix Switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix Switch socket combination , 2 in 1 , 3 pin, 5 Amps Flush type 240 Volts complete all as specified and as directed.Make: Legrand/Anchor/ABB

Supply and fix 30 Watt or next nearest higher watt LED Street light fitting , IP-65 Protection complete with pressure die cast housing with epoxy power coated dark graphite grey colour finish. Prismatic polycarbonate cover with individual LED lenses, luminaire with FRLS PVC 2 core 1.5 Sq mm copper conductor to connect LED light to existing ceiling rose/junction box through GI bracket and flexible PVC pipe with all accessories complete all as specified and as directed . (Make- Philips cat part no: BRP050 LED036 CW R1 MF PC S1 PSU GR / Equivalent price and specification of M/S Wipro (Note :- GI Bracket shall be paid seperatley.)

Supply and fix GI pipe 40 mm bore , medium grade, duly bend to shape of 1.2 m long mounting bracket, fixed with MS clamps bolts, nuts of suitable size etc complete all as specified and as directed .

Material and labour for Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanised earth strip of 25x 4mm by means of bolts,nuts check nuts and washers of GI all as shown in electric plate No 3 connecting to earthing test point including necssary exacavation in any earth strata , PCC chambers in PCC 1:3:6 type C1, RCC 1:2:4 type B1 cover slab 50mm thick with 8 mm dia TMT HCR/CRS steel bars at 140mm C/C both way and lifting handle watering pipe of GI 20 mm dia medium grade, funnels, lug 40mm dia 'light' grade GI pipe for protection of earth lead and charrcol,salt including 25 kgsof Bentonite etc all as applicable and as per plate No 3 of SSR part 1 connecting test point and testing on completion complete and all as specifed and as directed . Notes:-The rates quoted is inclusive of galvanised earth strip of 25 x 4 mm conductor upto a length of 7.5m from the earth pit.

Material and labour for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in to conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of size 25 x 4 mm galvanised iron strip complete and all as specifed and as directed

Supply and fix Powder coated DB for MCB single pole & neutral 8 way 240 volts,double door type with 200 Amps rated aluminium bus bar fixed inside the wall complete all as specified and as directed. Make:Indo Asian/L&T/Siemen

Supply and fix RCCB 40 Amps , 240 Volts of sensityvity 30 mA complete all as specified and as directedMake:- Make:Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volts of rupturing capacity 10KA,6A, C Series complete all as specified and directed.Make: Legrand/Anchor/ABB

Surface excavation n.exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed

Excavating over areas not exc 1.5 metre deep and getting out in soft/loose soil complete all as specified and as directed

Material and labour for Approved Moorum/red bajri, laid in layers not exc 15 cm thick spread levelled and binded with earth and rammed including watering and consolidation complete all as specified and as directed

Material and labour for Plain cement concrete 1:2:4 type B2 (using 40 mm graded aggregate) as in Hard stading including necessary form work complete all as specified and as directed.

Finishing surface of concrete road pavements by brooming

Material and labour for Plain cement concrete 1:3:6 type C-1 (using 20 mm graded aggregate ) as in coping including necessary form work complete all as specifed and as directed.

Material and labour fot Reinforced cement concrete Class NP 2 pipes ISI Marked ,150 mm bore with one collar per length of pipe complete all as specified and as directed.

Material and labour for Cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in concrete bed to drain pipes of 200 mm dia including packing under and haunching against the side of pipes after they are laid and tested complete all as specified and as directed.

Material and labour for Providing Pre cast reinforced cement concrete type B1 1:2:4 using 20 mm graded aggregate set in cement mortar 1:4 as in man hole cover slab including making perforated holes to drain water with necessary moulds/form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B 1 (using 20mm graded stone aggregate ) as in surface channel and drain complete all as specified and as directed.

Material and labour for Mild steel TMT bars 6 mm dia and over upto 8 mm dia as in stirrups,spacers and binders , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Extra forming for fair finished drain or channels of 30 cm girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.

Supply and fix galvanised steel water tubing of bore 25 mm, medium grade, ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors back nuts, diminishing piece, caps plugs and unions etc laid complete laid in trenches / fixed to wall and ceiling complete all as specified and as directed. Make:Tata/Jindal/Prakash Surya

Supply and fix galvanised steel water tubing of bore 20 mm, medium grade, ISI marked including all fittings such as bends, elbows, tees, short pieces, connectors back nuts, diminishing piece, caps plugs and unions etc laid complete laid in trenches / fixed to wall and ceiling complete all as specified and as directed. Make:Tata/Jindal/Prakash Surya

Supply and fix 25 mm dia bore C I stop /gate valve with iron wheel head screwed both ends for iron pipe and all fixing including connection T joints with existing pipe line complete all as specified and as directed. Make:Leader/Zoloto/Kirloskar

Supply and fix 20 mm dia bore Stop /gate valve cast copper alloy screwed down ,high pressure with iron wheel head screwed both ends for iron pipe and all fixing including connection T joints with existing pipe line complete all as specified and as directed. Make:Leader/Zoloto/Kirloskar

Construction of Valve pit ( brick masonary ) of size 600 x 600x 600 mm internal dimension with 3 mm thick MS steel cover angle iron frame work complete with locking arrangement including excavation and earth work and PCC ( 1;3:6 ) type C-2 with provision of two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer to steel surfaces complete all as shown on TD drawing and as specified .

Supply and fix MCB SPN 240 V, 40Amps C Series Breaking Capacity 10 KA Make : Schneider / Siemen/ABB .

Supply, lay & test LT UG cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty)with stranded aluminium conductor, 1100 volts grade, of size 2Core 10 sq mm complete all as specified and as directed. (Note : Make of cable : Gloster/Polycab/CCI)

Supply and spread clean dry river sand in trenches including levelling, punning for cushioning of cables complete all as specified and as directed. Note : Punned thickness of sand cushioning shall be measured and paid.

Supply and lay Sub class B bricks in layers perpendicular to the axis of UG cable for protection of cable complete all as specified and as directed.

Material and labour for Preparation of newly plastered celing surfaces and applying three coats of white wash complete all as specified and as directed.

Supply and fix 1.25mm thick Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; errected in position as indicated, complete with push pull or manual type complete all as specified and as directed . Note :Make of Rolling shutter:Diana/Madhu industries/ Modern Fabricator

Material and labour for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix Batten integrated LED flameProof Tube Light fitting 4 feet 1x36 W complete with all accessories internally pre wired and including connecting up with twin core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed. Make: M/S Baliga/M/S Sudhir

Supply and fix Heavy duty Flame Proof Exhaust Fan 300 mm sweep metallic body with louvers 1300 to 1400 RPM fixed with all necessary fixing arrangements 230 volts all as directed Make: M/S Baliga/M/S Sudhir

Supply and fix Flame proof Switch piano flush type single pole one way 5 A 240 Volts complete all as specified and as directed.Make: M/S Baliga/M/S Sudhir

Supply and fix Flame proof Switch socket outlet 5 pin 5/16 amp flush type complete all as specified and as directed.Make: M/S Baliga/M/S Sudhir

Supply and fix 30 Watt LED Flame proof Bulk Head Fitting connected with FRLS PVC 2 core 1.5 Sq mm copper conductor from LED light to ceiling rose/junction box through GI bracket and flexible PVC pipe with all accessories complete all as specified and directed. Make : M/S Baliga/ M/S Sudhir

Material and labour for Brick work with sub class 'B' bricks straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specifed and as directed

Material and labour for rendering 5 mm thick in cement mortor 1:4 with WPC over 10mm thick in cement mortar 1:4 in two layers, mixed with water proofing compound on top layer as per manufacturer’s instruction , finished even and fair without using extra cement complete all as specified and as directed.Note: WPC will be measured and paid seperately

Material and labour for Preparation of newly plastered surfaces of wall and applying two coat of cement based paint over a coat of chalk whitening primer complete all as specified and as directed.

Supply and fix Mild steel work as in framed work such as in doors or gates of angle or other section with gusset plates,rails,braces etc.complete,drilled for fixing of steel sheeting or other covering. Doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging ;also fastening and fixing complete.conforming to Fe 410-W(Gde-E-250) Quality A complete all specified and as directed.

Material and labour for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.Make:Tata Blue Scope/Jindal/Llyod

Supply only Mechanical foam fire extinguisher 9 litres capacity complete all as specified and directed.Make "Firex/Mather and Platt

Supply only fire extinguisher water CO2 stored pressure type 9 Litres capacity complete all as specified and directed .Make "Firex/Mather and Platt

Supply only Fire hook with 3.5m helves complete all as specified and directed .Make "Firex/Mather and Platt

Supply only Fire bucket complete all as specified and directed .Make "Firex/Mather and Platt

Supply only Fire shovel GS complete all as specified and directed . Make "Firex/Mather and Platt

Supply only 7.5m Aluminium ladder ,30 cm width complete all as specified and directed .Make :M/S RKS Ladder Chennai

Supply only Pick axes of 3kg weight complete with helves complete all as specified and directed .Make "Firex/Mather and Platt

Supply only Fire beater complete all as specified and directed . Make "Firex/Mather and Platt

Material and labour for Plain cement concrete 1:2:4 type- B2 (using 40 mm graded aggregate) ,100 mm thick as in hardstanding including necessary form work complete all as specified and as directed.

Material and labour for Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound Grade-B ,Thickness of slab 200 mm complete all as specified and as directed.Note:Make of Bituminous filler :M/S STP LTD

Material and labour for Forming Contraction (Dummy) joints in traverse direction to the road at a spacing of 4.50 meter ,65 mm deep and 10 mm wide filled with sealing compound Grade B complete all as specified and as directed. Make:M/S STP Ltd.

Demolition of brick work or stone masonry built in cement mortar or cement lime mortar including removal of debris off the MD land complete all as specified and as directed.

Taking down chowkhats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkhats or frames with shutters exceeding 1.5 sqm and not exceeding 4.0 sqm each (without taking off shutters from the frame) including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid , hard wood straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made Flush shutters 30 mm thick, factory made solid core construction, with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix Factory made solid panel PVC moulded door shutter , 30 mm thick (style) with wood free EPS , with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

Supply and fix in repair 150 mm long Aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed . Make:Crown/Adarsh/Atul

Supply and fix 100 mm butt hinges extruded aluminiu alloy galavanised mild steel hinge pin anodised and fixed type B-21 complete all as specified and as directed.Make:Crown/Adarsh/Atul

Supply and fix 75 mm long Aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed. Make:Crown/Adarsh/Atul

Supply and fix 75 mm long Aluminium handles fabricated type anodised complete all as specified and as directed. Make:Crown/Adarsh/Atul

Material and labour for Mild steel small articles such as clamps, hold fast etc conforming to Fe-410-0 .complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Non skid ceramic coloured tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 15 mm thick complete all as specified and as directed. Note :Make of ceramic tile:Johnson/Khajaria/Somany

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed.

Supply and fix in repair Vitreous china wash basin, white flat back size 550 x 400 mm including brackets, cutting for and pinning in ends of bracket or errecting stand including 32mm dia bore 1.5m long LDPE waste pipe complete all as specified and as directed.

Supply and fix in repair PVC valveless low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia PVC flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to pipes and fixing of chain and pully or lever if any complete all as specified and as directed. .

Supply and fix in repair Fancy type Chromium plated pillar tap, 15mm dia bore cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.Make: Prayag/Hindware/Cera

Supply and fix in repair Chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.Make: Prayag/Hindware/Cera

Supply and fix in repair Fancy type Chromium plated stop cock, 15mm dia bore ,cast copper alloy with long body screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.Make: Prayag/Hindware/Cera

Supply and fix in repairs Vitreous china wash down water closet pan (pedestal pattern ),white ( excluding fixing bolts, flushing cistern and flush pipe ) including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel chromium plated or aluminium hinging devices including making good the floors to match with the existing surface complete all as specified and as directed

Supply and fix in repairs PVC flexible connection 15mm size with PTMT nuts of length 450mm long complete all as specified and as directed. Make: Prayag/M/S Shakthi Industries

Taking down old rusted steel water tubing of sizes 15 mm bore with all fittings, including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Taking down old rusted steel water tubing of sizes 20 mm bore with all fittings, including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse and unserviceable pipes taken as credit complete all as specified and as directed.

Supply and fix in repair 150 mm long Aluminium handles fabricated type anodised complete all as specified and as directed. Make:Crown/Adarsh/Atul

Supply and fix in repairs Chromium plated shower rose of size 125 mm dia with or without swivel joints including fixing to steel pipe or union complete all as specified and as directed.Make: Prayag/M/S Shakthi Industries

Material and labour for Cast iron floor/nahani trap with grating including jointing to waste pipe in cement joint of 75 mm out let complete all as specified and as directed

Supply and fix in repair brass Chromium plated tubular towel rail 20 mm dia including CP brackets complete all as specified and as directed

Supply and fix in repairs CP hand shower( health faucet) with 8mm dia and 1500mm long flexible tube with wall hook complete all as specified and as directed.Make:Jaquar/Johnson

Supply and fix in repairs 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer)pipes SDR 7.4 & (PN 16) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directedNote:Make:SFMC/Vectus

Supply and fix in repairs 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) pipes SDR 7.4 & (PN 16) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directedNote:Make:SFMC/Vectus

Material and labour for 20 mm thick Granite slab (table rubbed and polished) in steps, jambs, pillars, window- cills,cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Material and labour for 20 mm thick Granite slab (table rubbed and polished) for wall lining (veneering to wall) 12 mm thick in cement mortar (1:3) 1 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed

Supply and fix in repairs PVC corrugated Waste pipe 32/38mm dia under kitchen sink/Wash hand basin complete all as specified and as directed . Make : Finolex/Supreme

Supply and fix powder coated aluminium door shutters ,,aluminium section weighing 0.55 kg/RM including joining cleats, glazing clips rubber neoprene packing , handle 02 Nos in each door and hinges , anodized alumnium snap beading screws etc complete all as specified and as directed. Note : (i) Minimum thickness of powder coating 50 microns.(ii) Make of aluminium frame: Jindal/Hindalco/Indal.

Supply and fix Aluminium body(Die cast) door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of width up to 700 mm and weight not more than 35 Kg complete all as specified and as directed.Make: Hardwyn/Everite (ISI Marked)

Supply and Fix Stainlees Steel plate rack of size 24" x 30" x 10" made out of 0.63mm thik SS Sheet, with shelves and racks to hold kitchen utensils such as plate, tumblers, bowls and cutlery etc with edges of racks, and shelvesl turned in, including fixing to wall with brass chromium plated srews as directed, plate rack of design and qulaity as approved and as drected.Make : Diamond/Blue star

Supply and fixed Stainless steel sink with draining board made out of 1 mm thick for kitchen with plug, washers including bedding in cement mortar to dwarf wall with cast iron cantilever brackets connecting union of overall size 915*460mm with bowl size 410*330*160mm including 32mm bore LDPE waste 1.50mm length complete all as spcecified and as directed.Make : Diamond/Blue star

Dismantling of water tank of capacity exc 500 litres but not exceeding 1000 litres and taken as credit complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (light,fan, socket or power) including fixture and fittings complete including removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully by unscrewing from boards/outlet boxes, wall/ceiling light fittings and fixtures such as switches, sockets, ceiling roses, and regulators, MCBs, DBs etc., taken as credit and making good the disturbed surfaces of wall etc.

Supply and fix Switch socket combination , multi purpose 3 pin, 5 Amps Flush type 240 Volts including taking down old unserviceable switche socket and taken as credit complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Switch socket combination ,multi purpose ,5 pin, 5/16 Amps Flush type 240 Volts complete all as specified and directed.Make: Legrand/Anchor/ABB

Supply and fix Stepped type electronic fan regulator for 1200mm sweep ceiling fan flush type , 240V on the existing phenolic laminated sheet complete all as specified and as directed Make :Legrand/Anchor/Rider

Supply and fix ceiling rose,modular type, two to three terminals PVC / Polycarbonate of 65mm X 50 mm, isolated body complete all as specified and as directed. Make : Baja/Anchor/HPL

Supply and fix LED wall light linear 01 ft length well designed PMMA diffuser anti glare with all wiring connections including taking down old fitting and taken as credit complete all as specified and as directed Make: Crompton Cat No: LCL-07-CDL or equivalent in Philips/Wipro

Taking down the Ceiling Fan with blades and dismantling , cleaning and greasing and refixing the same in position and connecting up including provision of flexible PVC cable from ceiling rose with using 1.5/2.0 feet down rod as required in site down from false ceiling complete all as specified and as directed.

Supply and replacement of MCB DP 40 amps 230 Voltsincluding taking down old fitting and taken as credit complete all as specified and as directed Make: Legrand/Anchor/ABB

Supply and replacement of MCB SP 6-20 Amps 230 Volts including taking down old fitting and taken as credit complete all as specified and as directed Make: Legrand/Anchor/ABB

Supply and replacement of Double door sheet metal enclosure for, MCB DB SPN 8 single pole and neutral 8 way , 240 Volts with 200 ramps rated bus bar including taking down old fitting and taken as credit complete all as specified and as directed. Make:Indo Asian/L&T/Siemen

M/S VIGNESH POWER SYSTEM