PROVN OF 300 METRE SEMI INDOOR FIRING RANGE AT MATHURA CANTT

Amount

SCH 'A' PART-I: BUILDING WORKS

Construction of 300 Metre Semi Indoor Firing Range comprising construction of following items complete, all as specified, shown on drg and as directed by Engineer-In-Charge:- (a) Baffle wall and side wall (PART-I to XI) (b) Stop Butt (b) Target Gallary (d) Firing Trench @ 100 metre (e) Firing Trench @ 200 metre (f) Firing Trench @ 300 metre (g) Canopy-1 (h) Canopy-2 (j) Canopy-3 (k) Canopy-4 (l) Ground Barriers GB-1, 2 & 3 (m) Ground Barriers GB-4, 5, 6 & 7 (n) Ground Barriers GB- 8, 9, 10 & 11 Note: Ground barriers to be provided in 11 rows (GB-1 to GB-11) containng 20 ground barriers in each rows, complete all as specified and as shown on drawings.

M&L for construction of Guard rest room including toilet block, complete, all as specified & shown on drawings and directed .

M&L for construction of Sentry post , complete, all as specified, shown on drawings and directed.

M&L for construction of covered shed for troops including toilets for troops & instructors, complete, all as specified & shown on drawings and directed .

M&L for construction of Watch tower including toilet block, complete, all as specified & shown on drawings and directed .

M&L for construction of Control room , complete, all as specified & shown on drawings and directed .

M&L for construction of Ammunition room, complete, all as specified, shown on drawings and directed.

M&L for construction of Sanitary Annexe for Officers, complete, all as specified, shown on drawings and directed.

M&L for construction of Heat Stroke room, complete, all as specified, shown on drawings and directed.

M&L for construction of Static Water Tank of 50000 Litre capacity, complete, all as specified, shown on drawings and directed.

Lump sum price worked out by the contractor for "INTERNAL WATER SUPPLY WORKS " as listed in Schedule ‘A’ Part-II representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "INTERNAL ELECTRIFICATION WORKS" as listed in Schedule ‘A’ Part-III representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "ROAD, PATH & CULVERT" as listed in Schedule ‘A’ Part-IV representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "SEWAGE DISPOSAL " as listed in Schedule ‘A’ Part-V representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "AREA DRAINAGE" as listed in Schedule ‘A’ Part-VI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Lump sum price worked out by the contractor for "SECURITY FENCING AND GATE" as listed in Schedule ‘A’ Part-VII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL WATER SUPPLY" as listed in Schedule ‘A’ Part-VIII representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "EXTERNAL ELECTRIFICATION " as listed in Schedule ‘A’ Part-IX representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "LIGHTENING PROTECTION " as listed in Schedule ‘A’ Part-X representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price of prepriced by the MES

Lump sum price worked out by the contractor for "SITE CLEARANCE, SITE DEVELOPMENT & EARTH WORK etc." as listed in Schedule ‘A’ Part-XI representing percentage ( + or - denomination) derived under last column of this schedule above/below the lump sum price prepriced by the MES

Sch 'A' PART-XII: MISCELLANEOUS ITEMS Notes: (i) This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under column 5 signifies this fact only. (ii) Excavation and earth work except for the items which categorically includes for same shall be measured and paid separately under SCH A PART-XI (SITE CLEARANCE, SITE DEVELOPMENT & EARTH WORK schedule).

BLANK

INTERNAL ELECTRIFICATION

M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm (Phase-Red& Neutral-Black) and earth continuity conductor 1.5 Sqmm (Green) drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 20mm bore, ISI marked ivory colour with all conduit fittings/fixing accessories and unwelded sunken galvanized pressed steel terminal boxes of thickness not less than 1.2mm covered with 3 mm thick phenolic laminated white sheet cover for mounting switches as required for one light point control by one, one way switch. complete, all as specified & directed.

All as per item No 14.01 here-in-before but One fan point controlled by one nos, one way switch all as specified & directed

All as per item No 14.01 here-in-before but One three pin 5 Amp socket outlet point on independent board controlled by one nos, one way switch on independent board.

All as per item No 14.01 here-in-before but One three pin 5 Amp socket outlet point on same board controlled by one nos,

All as per item No 14.01 here-in-before but point wiring with 2.5 sq mm single core FRLS cables and earth continuity wire with 2.5 Sq mm single core cable for one 3 pin 15 Amps socket out let point controlled by one nos, one way switch on independent board.

S & F Highly efficient LED Bulbs, 9 watts complete all as specified and directed

SEWAGE DISPOSAL .

M&L for RCC Septic tank for 100 user designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, RCC M-30 Design Mix in Walls , Base Slab , Baffle walls and roof Slab including beams etc with Vent shaft , manhole openings with cover connection etc., complete with effective depth of 1.0 meter and overall avg depth of 1.93 meter, complete all as specified and directed (TD NO TD/ST/795, Sheet 1/2 & 2/2)

M&L for Soakage wells 100 user 2.4 M dia X 3.0 M effective depth excavation, in any type of soil, foundation in PCC 1:4:8, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed ( TD NO- CEJZ/2004/TD/S-35 sheet No 1/1)

M&L for Septic tank for 10 user On site designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation Brick work to wall, Vent shaft, connection etc.,below foundation, RCC M-25 Design Mix in roof Slab with Vent shaft , manhole openings with cover connection etc., complete for complete all as specified and directed ( TD NO- CEJZ/2002/TD/S-2 sheet No 1/1)

M&L for Soakage wells 1.2 M dia X 3.00 M effective depth excavation, in any type of soil, foundation in PCC 1:4:8, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size complete all as specified and directed ( TD NO- CEJZ/2004/TD/S-35 sheet No 1/1)

EXTERNAL WATER SUPPLY

M&L for Cutting of existing CI/DI pipe upto 150 mm bore in position for inserting new Tee, branches, sluice valves etc, complete, all as specified & directed.

Supply , laying and testing ductile Iron pressure pipe 100 mm bore with spigot and socketed ends centrifugally cast, Class K-7, conforming to IS: 8329/2000 suitable for push-on-jointing (Rubber tyton joints) with inside cement mortar lining with internal metallic zinc coating and external Black Bitumen coating complete all as specified and as directed by Engr-in-charge. Note:- Cost of joints including jointing material /rubber tyton ring shall deemed to be included in unit rate quoted by the tenderer. Earth work & DI specials/ fittings shall be measured & paid separately.

M&L for Ductile iron fittings, IS-9523 marked viz bends, tapers, reducers, tee pieces (single or double branch) any type, angle / radius and straight connecting pieces, flanged / socket and spigot ends, size of pipe upto 150 mm bore, complete all as specified & directed.

M&L for brick masonry valve pit of size 600x600x900 mm (internal dimension of chamber) including plastering on internal surfaces in cement mortar 1:4 and flush pointing to external surfaces as the work proceeds in same mortar, including PCC work, plaster in CM 1:6 in and out side above ground level, angle iron 40x40x6mm framer work, hold fast complete with 3 mm thick thick MS sheet cover, handle, packing arrangement, earth work in any type of soil including removal of excavated soil to n.exc 50 m and painting with 2 coats of synthetic enamell paint over a coat of red oxide primer to steel surfaces complete all as specified, shown in drg & as directed.

EXTERNAL ELECTRIFICATION WORK

M&L for supply, installation, testing and commissioning of LT panel outdoor type, dust and vermin proof totally enclosed with sloping canopy, fabricated out of steel sections, the door opening shall not be less than 150 degree, IP 54 standard double shutter gears front and rear frame work and 3.15 mm thick MS sheet duly painted with powder coated over two coats of red oxide primer and made of 40 x 40 x 6 mm thick angle iron frame all as specfified suitable for 415 Volts, 50 Hz 3 phase and nuetral system and shall be connected with 200 Amps capacity aluminium bus bar with bus bar chamber, internal wiring with suitable size of PVC insulated copper cable copper lugs comprising of following accessories( LTP)

Incoming (a) MCCB 4 pole 125 A, 25 KA -1 No incoming (b) LED Indicating lamp 3 Nos (c) LED Multifunctional meter -01 Nos Outgoing (a) MCCB 4 pole 63 Amps 16 KA - 01 Nos (b) MCB 4 pole 63 Amps, TPN 10 KA - 01 Nos (c) MCB TPN 40 Amps, 10 KA- 02 (d) MCB SPN 32 Amps, 10 KA- 02 (e) Auto timer switch

M&L for supply, installation, testing and commissioning of LT panel outdoor type, dust and vermin proof totally enclosed with sloping canopy, fabricated out of steel sections, the door opening shall not be less than 150 degree, IP 54 standard, double shutter gears front and rear frame work and 3.15 mm thick MS sheet duly painted with powder coated over two coats of redoxide primer and made of 40 x 40 x 6 mm thick angle iron frame all as specfified suitable for 415 Volts, 50 Hz 3 phase and nuetral system and shall be connected with 200 Amps capacity aluminium bus bar with bus bar chamber,internal wiring with suitable size of PVC insulated copper cable copper lugs comprising of following accessories( FP-1)

Incoming (a) MCCB 4 pole 63 Amps 16 KA - 01 Nos (b) Indicating lamp 3 Nos (c) LED Multifunctional meter (Make: L&T) -01 Nos Outgoing (b) MCB 4 pole 63 Amps, TPN 10 KA - 01 Nos (c) MCB TPN 40 Amps, 10 KA- 02 (d) MCB SPN 32 Amps, 10 KA- 02 (e) Auto timer switch

S&F 45 Watt LED street light with lens optics on LEDs, IP66 protected luminaire fixture made from pressure dia cast aluminum housing & heat resistance toughned glass cover with one number of 45 W driver, operating voltage range 130-275 Volt, suitable upto 50 mm mounting pipe as directed. Make: Crompton Greaves, Cat No.LSTP-45-CDL or equivalent from other specified make.

M&L for GI bracket made from 40mm bore GI medium grade pipe 1.0 m length, single swan neck shape suitable to fix on top of tubular pole complete with 2 Nos FI 25 x 3 mm Clamp, nuts, bolts and washers complete all as specified and directed .

S&F poly carbonate junction box , weather and vermin proof of size 250X250X160 including provn of 4 Nos aluminium strip 25x3.15 mm size bus bar single phase and neutral suitably mounted on bus bar insulators , including one No. MCB SP 6 Amps for light control, drilling of holes, provn of suitable size of GI nuts, bolts, double washer and FI clamps of suitable size for taking connections and fixing on LT steel tubular poles with locking arrangement, complete, all as directed.

Supply & installation of energy efficient LED flood light fitting suitable for 1 X 150 watt including fixing arrangement on pole and connecting up with suitable size of copper flexible cable complete. (for butt top canopy for target area)

Supply & installation of energy efficient LED flood light fitting suitable for 1 X 50 watt including fixing arrangement on baffle and connecting up with suitable size of copper flexible cable complete. (for 27 no baffle 4 no on each)

Supply & installation of energy efficient LED flood light fitting suitable for 1 X 30 watt including fixing arrangement on baffle and connecting up with suitable size of copper flexible cable complete. (for 04 no fire trench 02 in each)

S&F post top lantern into integrated solar street light 15 watt the system shall include FRP housing Hi-brightness W-LED (120-140 lumens per watt) operating voltage 11.1/12.8 V , IP-65 complaint driver efficiency 85 % to 90 % CRI> 70 CCT 5000 to 6500 kelvin toughen glass /acrylic cover MPPT/PWM base charge controller with hi efficiency LED driver designed with/without dimming function as per IEC complaint Hi efficiency 28/30 wp mono crystalline solar panel, 15.4 AH lithium battery DOD 90 to 95 % with inbuild PCB as per BIS complaints dusk to down operation working temperature (-) 10 degree C to (+) 50 degree C, weight 6-7 kg with adjustable powder coated MS clamp suitable for pole/wall mounting protection short circuit, overload reverse polarity and battery protection complete with GI iron pipe 65 mm dia, medium grade, 5 mtr high exculding 1 mtr planting depth with aluminium painted foundation of pole with PCC 1:3:6 using 20 mm graded stone aggregate of size 450 X 450X 1000 mm deep complete all as specified and directed

M&L for cable route indicator showing "MES HT UG Cable" and route of cable with arrow made of CI in suitable elliptical / round shape and fixed on angle iron 40 x 40 x 6mm, 1100 mm long painted in blue colour with two coats of synthetic enamel paint over a coat of red oxide primer duly embedded in and including cement concrete of (1:4:8), type D-2 (using 40 mm graded stone aggregates) block of size (0.4 x 0.4 x 0.4 mtr) in ground and 0.15 mtr above ground level, complete, all as specified and directed.

M&L for cable route indicator showing "MES LT UG Cable" and route of cable with arrow made of CI in suitable elliptical / round shape and fixed on angle iron 40 x 40 x 6mm, 800 mm long painted in blue colour with two coats of synthetic enamel paint over a coat of red oxide primer duly embedded in and including cement concrete of (1:4:8), type D-2 (using 40 mm graded stone aggregates) block of size (0.4 x 0.4 x 0.4 mtr) in ground and 0.15 mtr above ground level, complete, all as specified and directed.

Supply and laying or fixing or passing through GI pipe, bracket from fitting to pole / junction box, 1100 volts grade heavy duty cable with PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed , 4 sq mm 2 core nominal cross section as in service connections, complete, all as specified and directed.

Supply only Rubber mat of 1 meter x 2 meter x 10 mm

COOLING APPLIANCES

Supply and installation hi wall split AC units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and Plasma filter for better indoor air quality with minimum 5 star rating and EER 3.2 of capacity 1.5 Ton, including stand for outdoor unit installation, complete, all as directed.

Supply and insttalation of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 5 KVA, complete, all as directed.

S&F single pole & Neutral enclosure with a 2 pin and earth plug and socket complete with one single pole MCB 20 Amps 240 Volts all as specified and directed.

M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable drawn through and including PVC conduit ISI marked not less than 20 mm dia (external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4.0 Sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 volts grade cable as earth conductor complete as specified & directed. Note : Two runs of 4 Sqmm cable, one run of 4.00 Sqmm earth conductor shall be measured and paid as one length along with one run of PVC conduit.

S&F suction lines/discharge lines copper pipes of suitable size as necessary at site, complete, all as specified & directed.

Supply, installation & commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/40 litre. (for heat strok room & officer waiting area), complete, all as directed.

Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity 40/80 litre.(for OR waiting & guard rest room area), complete, all as directed.

Supply and insttalation of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA, complete, all as directed.

Supply and insttalation of Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA, complete, all as directed.

M&L for GI Tubing, ISI marked, medium grade 15 mm bore, fixed to wall and ceiling or laid in floors including necessary fittings such as tee, bend, elbo etc. complete ass as specified & directed.

M&L for GI Tubing, SI marked, medium grade 20 mm bore laid in trenched including necessary fittings such as tee, bend, elbo etc. complete ass as specified & directed. (Note: 250 RM GI pipe of 20mm bore will be executed against ser item No. 20.14 of Arboriculture.)

Supply and fix cast copper alloy stop valve, screwed 15 mm (1/2") dia pipe (for desert cooler)

BLANK

ARBORICULTURE

Supplying and stacking at site decayed dung manure screened through IS desingnation 20 mm sieve , from approved source, complete all as specified and directed. Notes:(i) The rate quoted shall include cost of royalty, excavation and transporation of manure to any distance and stacking for measurement. (ii) Manure measured in stacks will be reduced by 10% for payment.

Mixing decayed cowdung manure and soil/earth to make mixture of earth & manure, spreading the same over required area and surface dressing the area to a true level and required slope for grass plantation or to make plant/flower beds, complete all directed. Note: Sweetv earth/soil and cow dung manure shall be measured under item No. 20.01 & 20.02 here-in-before.

Levelling of land by means of suitable mechanical means i.e. leveller etc pulled by tractor and leveling / planing the surface using heavy wooden pallet for light compaction and preparing the surface containing optimum moisture content and planting doob grass in rows 10cm apart in either direction complete all as specified and as directed by Engineer-in-Charge.

M&L for spreading of Urea as fertilizers as per requirement of trees & Grass all as per direction of Engr in Charge

M&L for spreading of ATT 20 EC all as per direction of Engr in Charge

Supply & Hedging plant (8 to 10 inches) ( Duranta , Enermy, Lantana) planted in two staggered rows at a density of not less than 5 per meter, with pproximately 200 mm between plants in the same row, and 300-400mm between rows. The interplant whips/transplants should be planted within this pattern in groups of 2/3.Hedge row scheme as directed by Engineer-in-charge.

Ashoka plant

Neem plant.

Mango plants

M&L for GI Tubing, ISI marked, medium grade 20 mm bore, laid in trenched including necessary fittings such as tee, bend, elbo etc. complete ass as specified & as directed.: 250 RM. Note: GI pipe of 20mm bore will be measured and paid under item No. 18.12 here-in-before.

M&L for GI Tubing, ISI marked, medium grade 25mm bore, laid in trenched including necessary fittings such as tee, bend, elbo etc. complete ass as specified & as directed.

M&L for Gun metal gate valve with iron wheel head screwed both end for iron pipe, 20mm bore complete all as specified and directed

Supply only rubber /PVC tube, heavy duty, with nylon thread inside for watering of 20 mm dia as specified and directed.

Supply only brass sprinkles, heavy duty suitable for connecting to 25mm dia water connection, with and including MS standing arrangement for watering the area complete all as directed by engineer -in-Charge

PRIME COST SUM

MAGO CONSTRUCTION PVT. LTD. (BID ID -3126643)

B D Raizada Projects Pvt Ltd (BID ID -3126879)

SOOD ASSOCIATES PVT LTD (BID ID -3126909)

Som Projects Pvt. Ltd. (BID ID -3135153)

Jasraj & Company (BID ID -3123437)