SPECIAL REPAIR TO CERTAIIN BATHROOMS/COOKHOUSE BLDGS AT 6 ASSAM AND 02 X REV WORKS AT 03 BIHAR IN THE AREA OF AGE B/R-I UNDER GE GWALIOR.

Surface dressing n. exc 15cm deep and averaging 15cm deep and getting out in hard/dense soil complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

Earth work in excavation by mechanical means (Hydraulic excavator) means over areas (exceeding 1.5m in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5m, complete all as specified and directed.

M&L Boring hole in rainwater harvesting pit in any type of soil of 550mm size bore etc complete all as specified and directed.

S&F 150mm Bore dia PVC/ HDPE pipe in bore hole complete all as specified and directed

S&F 150mm Bore dia perforated/slotted PVC/ HDPE pipe in bore hole complete all as specified and directed

M&L stone aggregate gravel of gauge 3.60 mm, complete all as specified and directed.

M&L cement concrete (1:2:4) type B-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

Use of waste for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; verticle or to batter with rough finish flat surface, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire 0.9 mm dia, complete all as specified and directed.

M&L RCC M-30 (Design mix) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed.

Use of waste for formwork (rough finished) to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttressess etc vertical or to batter, complete all as specified and directed.

M&L cement concrete M-30 (design mix) (using 20mm graded stone aggregate) as in walls, retaining walls, basement walls, ballast walls, and the like any thickness above top of footing incluidng attached pillaster and buttresses, complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work /concrete surface in CM 1:6 using liquid water proofing compound by weight or cement as per manufacture instruction and finishing even and smooth without using extra cement all as specified and directed.

Supply only liquid integral water proofing compound comple all as specifed and directed.

M&L Hardcore of broken stone of gauge 40 to 60mm, deposited spread and leveled in layers n. exc 15 cm thick each layer, watered and rammed to a true surface complete all as specified and directed.

M&L broken stone aggregate of gauge 3 to 10 mm, complete all as specified and directed.

M&L sand filling under floor (Coarse Sand) on in foundation in layers not exceeding 25cm thick each layer including watering and well ramming complete all as specified and directed.

S & F mild steel plates (plain or chequred) channels, square cut or notched (ordinary and counter sunk) forming holes, riveted, bolted or welded attachment complete all as specified and directed conforming to Fe-410 W

Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors dia of pipe 150 mm complete all as specified and directed.

S&F 100 mm dia vent PVC (SWR) pipe 600mm long, bent to shape, with fittings as vent pipe complete all as specified and directed.

Use of waste for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick finish with rough finish flat surface complete all specified and directed.

M&L for RCC M-25 (design mix) (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

M&L for pre-cast reinforced cement concrete (1:2:4) type B-1 (using 20 mm graded stone aggregate) as in manhole covers and set in cement mortar (1:4) including use and waste necessary form work complete all as specified and directed.

Removing excavated material to a distance exc 50 m and n.exc 100 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

S&F cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings railing frames,manhole covers, fire and soot doors, dampers, stop valves boxes, gate stops, part of ranges, balusters ans similar articles complete all as specified and directed.

M&L for cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out etc as in any type of soil complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (old size) straight or curved on plan, exc. 6m mean radius or cement concrete, built in cement mortar 1:6 as in manholes, septic tanks, soakage pits, drain etc in any position complete all as specified and directed.

M&L PCC 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in surface channel, foundation filling,wall coping, and mass concrete etc, complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred/stopped ends, complete all as specified and directed.

Add or deduct for each 25 mm girth or part thereof over or under 30cm in above item complete all as specified and directed.

M&L for 15 mm thick rendering on Brick mansonary or other than fair faces of brick wall for external CM 1:4 finished even and fair without using extra cement, complete all as specified and directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point complete all as specified and directed.

Demolition of concrete of any description in any position complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

M&L 75mm thick for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in plinth protection and path laid in alternate panels not more than 3 mtr in length, laid to slope 1:30 including forming joints 10 mm wide and upto full depth of PCC and filled with bitumen mastic (1:3) part bitumen 85/25 and 3 parts of sand complete all as specified and directed. (Note:-Rate is deemed to be inclusive of materials against forming & filling of joints)

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:6) on fair faces or brick work of concrete surfaces of walls, finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 5 mm thick rendering in cement (1:3) on fair faces of concrete as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

S&F GI wire netting/ Chicken wire mesh 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and directed.

M & L for three coats of white wash on New surfaces (wall) including all prereration complete all as specified & directed

M & L for three coats of white wash on New surfaces Ceiling including all prereration complete all as specified & directed

M & L for prepration of old surfaces and applying two coats of white wash on wall surfaces including all preperation complete all as specified & directed.

Providing and applying 1.5 mm thick wall care putty over plastered surface to prepare the surface even and smooth all as specified and directed.

M&L applying two coats OBD including one coat of primer complete all as specified and directed.

M&L for preparation of old decorated wall surfaces including cornices by broming down with steel brush, scrapping down smoke soot, moulds moss and efflorescent salts and trading oil and grease spots and applying one coat of distemper oil bond emulsion by using rollers complete all as specified and directed.

M&L for preparation of old decorated surfaces (plastered/ un-plastered) of ceiling incl cornices by brooming down with steel brush, scrapping down smoke soot, moulds, moos and efflorescent salts and trading oil and greasy spots and applying One coat of white wash on ceiling complete all as specified and directed.

M&L coloured non skid tile 7 to 8mm thick (square/ rectangular) area of each tiles exc.o.06 sqm n exc.,0.18 sqm in floor etc. set and jointed with neat cement slurry and pointed in colur cement to match over and including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L glazed ceramic tiles of size 450x350x/6/7 /350x250x7/ 300x200x7mm thick coloured tiles on walls such as skirting and dado and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in cm (1:4) finished fair and rough as backing coat complete all as specified and directed.

a) Dismantling of floor of WC and Bath not exceeding 500mm deep, removing cinder/concrete from sunken portion, cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable method as per site condition, including grinding of sharp edges complete all as specified and directed.(b) Cleaning of RCC surface to remove dust, loose particles etc. by compressed air or any other suitable technique as per site condition complete all as specified and directed.(c) M&L for providing a glass fibre reinforced acrylic modified cementitious coating system comprising base coat @ 1.50 Kg/Sqm, glass fibre reinforcement and top coat with Sika Top® Seal-107 @ 1.50 Kg/Sqm or equivalent of Fosroc / MC Bauchemie India Pvt Ltd, applied to floor area and vertical surfaces thereof complete all as specified and directed.(d) M&L for 15mm thick protection plaster in cement mortar (1:3) mixed with integral waterproofing compound (IWPC) in accordance with manufacturer’s instructions complete all as specified and directed.(e) M&L for providing 40mm dia GI pipe medium grade spout projecting at least 150mm beyond outer face of wall. (Paid separately under respective item).(f) M&L for filling sunken portion with PCC (1:5:10) type E2 (using 40mm graded stone aggregate) and finishing with 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed. Notes: (i) The work shall be executed only through authorised manufacturer’s applicator. (ii) Para (c) is applicable for both floor area and vertical surfaces of the same area. (iii) For payment, net floor area shall be measured. (iv) The cost of all operations specified above shall be deemed to be included in the quoted rates of the respective items and nothing extra shall be admissible on this account.

Taking down eaves gutters and rain water pipes (any size 75mm to 110mm of any pattern) ,of any description and in any position, including all fittings , heads, shoes, bends, swan necks, etc., (measured overall as fixed along the centre line over fittings and accessories)complete all as specified and directed.

S&F 110 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

ditto but fixed in wall 110 mm

S&F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

ditto but fixed in wall 75 mm

S& F PVC SWR bends any radius 75mm dia with access door or without access door completed all as specfied and directed.

S& F PVC SWR bends any radius 110 mm dia with access door or without access door complete all as specfied and directed.

S& F PVC (SWR) junction single, (Single T) equal or unequal 75mm dia with access door or without access door complete all as specfied and directed.

S& F PVC (SWR) junction single, (Single T) equal or unequal 110 mm dia with access door or without access door complete all as specfied and directed.

S&F PVC SWR vent cowl 110 mm dia complete all as specfied and directed.

S&F for 100mm bore pipes stack clamps out of size 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specfied and directed.

S&F for 75mm bore pipes stack clamps made out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc complete all as specified and directed.

S&F 75 mm PVC (SWR) couplers complete all as specfied and directed.

S&F 110 mm PVC (SWR) couplers complete all as specfied and directed.

S&F 110 mm PVC (SWR) junction double, (double T), equal or unequal

S&F 110mm PVC pipe 'P' or 'S' trap, complete all as specified and directed.

S&F 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specified and directed.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specified and directed.

Supplying and laying of 20 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches and fixed/concealed complete to walls and ceiling or laid in floor etc complete all as specified and directed.

S&F in repair W.C vitreous china, squatting pan orissa patern of size 580x440mm white with intergral foot rest & P - or S trap,flush pipie complete excluding cistern complete all as specified and directed.

S&F in repair W.C vitreous china, (pedestal patern ) white (excluding flushing cistern and flush pipes ) including seat cover fixing bolt & P - or S trap,flush pipie complete all as specified.and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type flushing cistern low level white with inlet ball valve, float and handle incl brackets and connections to pipes of capacity 10 lts complete all as spepcified and directed.

S&F in repair stop cock/angle valve 15 mm nominal bore brass chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 125mm dial size with 15 mm shower arm complete all as specified and directed

M&L 75 mm dia PVC (SWR) floor trap with grating including jointing with solvent cement joint complete all as specified and directed.

S&F PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair CP fancy type bib tap cast copper alloy with crutch or butter fly handle (Long Body), screwed down screwed for iron pipe 15 mm bore of tubing complete all as specified and directed.

S&F in repair Vitreous China wash basin oval type white of size 580 x 450mm excluding taps waste, chain and plug, but fixed waste pipe complete all as specified and directed.

S&F for 32mm PVC waste pipe for flushing cistern complete all as specified and directed.

S&F 25 mm bore Ball brass valves, high pressure, with polyethylene float and fly nut complete, screwed for iron pipe or brass ferrule and fixed with all necessary fitting and fixer reducer elbow etc complete all as specified and directed

S&F in repair 15 mm bore cast copper alloy stop valve , fancy type chromimum plated with long shank and cup (concealed type ) screwed down , high pressure, with crutch or butter fly screwed both ends for iron pipr or union and fixed complete all as specified and directed.

S&F in repair 15 mm Fancy type pillar tap cast copper alloy with capstan head chromumum plated screwed down high pressure with lettered hot or cold with long screwed shank and fly nut screwed for iron pipe fixed complete all as specified and directed.

S&F in repair Vitreous China half stall urinal flat back, of size 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe vitreous china urinal bowl type white fixing plugs bedding urinal against wall in cement mortar 1:2 securing to plug with and including 60 mm long brass screws urinal spreader of PTMT any color fixing with 15 mm dia pipe PVC pointing aroung urinal back in cement complete all as specified and directed.

S&F for towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and as directed.

S&F in repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets complete all as specified and as directed.

S&F in repair Stainless steel cromium plated Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.

S&F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified and directed.

Taking down old U/S wooden /steel chowkhat with shutter size n. exc 1.50 sqm each and removing from site complete all as specfied and directed.

All as per item No 97 above but size exc 1.5 and nexc 4 sqm complete all as specfied and directed.

Taking down shutter from the frame of any discription n exe 2 sqm each and refixing in same opening in same openinig and necessary repair complete all as specified and directed.

S&F pressed steel frame of size 125mmx60mm for doors with one or more rebates including necessary fixing lungs and hinges, lock strike plate,etc complete all as specified and directed

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F for 35 mm thick glazed and skeleton shutters of 2nd class Hard Wood, open rebated and prepare to reveive glass, guage etc (without sash bars ) edges of framing plain chamfered or rounded, fitted with for securing glass etc, size of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) complete all as specified and directed.

S&F 150 mm long aluminium anodised , barrel tower bolt of extruded section and fixed complete all as specified and directed.

S&F aluminum handles extruded type, anodized of 150 mm size complete all as specified and directed.

"Supply and fix mild steel butt hinges, 100mm long, medium weight, made from cold rolled mild steel, complete all as specified and directed."

S&F Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

Supply and fix mild steel 300mm size, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

M&L PCC 1:3:6 type C2 (using 40mm graded stone aggregate) cement concrete as in back filling in chowkhat and mass concrete complete all as specified and as directed.

S&F Box type steel windows/ventilator with side hung shutters (double shutters for glass and guaze) jointed together with an including grills using 10mm square bars @10 cm C/C as per TD No CEBZ/TD/14/2011 including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed and welded making a good complete all as specified and as directed. Note : Glass/ guage shall be measured and paid separately under respective item.

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification of drawing complete all as specified and directed.

M&L for Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification of drawing complete all as specified and directed.

S&F 75 mm size Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 75 mm long Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed.

M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beads in square size n.exc. 0.5 sqm in each pane complete all as specified and directed.

Hacking out old broken galss (any thickness, size, quality or description) from wooden/metal frames or stone concrete or brick surfaces, glazed with putty or fixed with beads complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesor MS beads size 2mm to 3mm complete all as specified and directed.

M&L Preparing New steel surface of any description over 10 cm width girth not otherwise describe and applying two coats of synthethic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm complete all as specified and directed.

Cutting holes in brick walls (exc half brick but n. exc one brick) in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 (using 20mm graded stone aggregate) as required complete all as specified and as directed.

M&L for RCC (Nominal Mix) M25 (using 20 mm graded stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs & manhole cover and in shelves and the like complete all as specified and as directed.

Use and waste of Fair finished flat Form work to soffits of suspended slabs such as roof slabs, floor slabs and similar work not exceeding 200 mm thick complete all as specified and as directed.

M&L for Mild steel TMT bars 5 to 10 mm dia and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&l for brickwork with old size fly ash bricks half brick thick wall, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed.

M & L cement concrete type (1:4:8) D-2 (using 40mm graded stone aggregate) as in Concrete bed to 150mm drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L 150 mm dia Reinforced concrete pipes, class NP3 , laid and jointed complete with collars complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick each layers complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails (including Cupboard shutter/Shelve upto 25mm thick) complete all as specified and directed.

S&F for 18mm thick PVC Celuka ply of both side prelaminated and other side plain white colour fixed with screws, solvent cement/ adhesive complete all as specified and directed.

S&F for continous (piano) hinges, mild steel, bright finished or electrogalvanised, width of flap 30mm complete all as specified and directed.

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

S&F Brass 2 Levers Cupboard locks grade 1, Size 50mm complete all as specified and directed.

S&F for 100 mm size Brass handles, cast type, polished bright and fixed complete all as specified and directed.

M&L for carrying out treatment for RCC Chajja’s, Ceilling, facia etc; in the following stages :- (i) Dismantling and removing damaged core concrete by manually/ mechanically means in columns, beam, roof slab, chajja, lintels, etc complete including disposal of unserviceable debris. (ii) Diamond wire saw cutting making profile at edges and avoiding feather edges. (iii) Hydro-demolition cutting / cleaning with high-pressure water jetting. (iv) Chipping of loose concrete from surface to expose sound concrete beneath using light chisel, hammer & also preparing concrete surface to receive further treatment, disposing the unserviceable debris. (v) Sand blasting for cleaning of reinforcement and chipped surface of concrete so as to cause an intense abrading of the reinforcement and removal of rust from entire surface of reinforcement to achieve shining bright surface. (vi) Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface. (vii) Providing and applying approved chemical rust remover with paint brush on corroded rebar and removing loose particles after 24 hours of its application and washed with sufficient quantity of water to make rebar free from corrosion (Dr. Fixit Rust Remover/equivalent). (viii)Surface preparation to remove all dust, dirt, loose rust scales etc., with wire brush, emery papers, rotary wire bristle brushes and grinding (if required) to the concrete surfaces to receive further repair treatment. (ix) Providing & fixing new reinforcement of various diameters as required at site in the form of mild steel and /or steel confirming to IS and lapping, welding, anchoring suitable to the old reinforcement including cutting, bending with all tools & tackles etc. (x) Providing and fixing GI weld mesh (1” x 1” x 12 gauge) with 30 cm lap at junction, one layer around the cross section of beams/ slab and along the span length. (xi) Providing and applying approved epoxy zinc rich anti-corrosive coating of 40 micron dry film thick/approved thickness of Dr. Fixit Zinc Rich Primer/ equivalent to the exposed reinforcing bars after application of rust remover, on the shear connectors/welded mesh/additional reinforcement of entire concrete repair surface. (xii) Dubbing out PMC 20mm thick (average thickness),(Polymer modified mortar/concrete) on uneven/ irregular surface such as walls / ceiling / chajjas etc. (using 12.5mm graded crushed stone aggregate) including 10mm thick PMM plaster in CM 1:3 ratio (Polymer modified mortar) on concrete surface (when concrete is green) ,(using Polymer modified 20% by weight of cement) complete all as specified and directed.

Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point etc) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed.

Taking down exhaust fan of any sweep,removing blades, cleaning the fan completely of dust and dirt and Re-fixing the same back to its original positions including connecting with three core flexible copper wire to ceiling rose etc after the completion of the point wiring including renewal of old unserviceable exhaust fan fixing material, rubber pad, nut bolts and washers etc, complete all as specified and as directed.

Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed.

Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete, all as specified and directed.

M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including concealed non metallic rigid PVC conduit medium grade( ISI marked with valid CML No) not less than 20 mm dia with all fitting and fixing accessories and 1.5 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with brass screws and cup washers duly painted with two coats of anti corrosive paint/black bituminous paint outside and two coats of aluminium paint inside for mounting switches. sockets etc, complete all as specified and directed.

One light point controlled by one switch.

One Exhaust fan point controlled by one switch.

One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch.

One 3 pin/5 pin switch socket outlet, 5 Amps on independent board.

Description all as per item No 6 here in before but point wiring with 2.5 sqmm FRLSH H confirming to IS 694:2010, multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire, complete all as specified and directed.

S&F Modular switch 1 way 6 A,1 module with marked L/T/F complete all as specified and directed.

S&F Modular Socket, 6A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular switch 1 way 16 A,1 module complete all as specified and directed.

S&F Modular Socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed.

S&F Modular ceiling rose surface bakelite 63.5 mm dia three terminal complete all as specified and directed.

S&F Modular Lamp holder with metal ring, PVC/Polycarbonate type with back plate suitable for batten fittings ISI Marked complete all as specified and directed.

S&F LED Lamp 09/10 watt complete with 5 star rating complete all as specified and directed.

S&F sheet metal Enclosure with socket Plug top and earth plug, Single pole and neutral with single pole MCB 20 Amps 240 Volts complete all as specified and directed.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 4 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

M&L for sub main wiring with two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and including non metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 4 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed. (NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chases in wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface.

S&F Decorative ultra slim LED Tubelight fitting of LED with extruded polycarbonate, enviormental friendly energy efficient ready to use, 20 watt,4000k to 6500K as per required fitting incluing reqd length of not less than 1.0 Sqmm PVC multistranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on complete all as specified and directed.

S & F security light fittings better optics for uniform distribution IP 65 protection LED of 30 watt with Photometric sensor outdoor type 220-240 volt ambient light <5-15 lux working temparature -20~+40C working humidity <93% RH along with pvc connection of 6 to 10 amp capacity , Heat resistance glass, pressure die cast aluminium housing including 25mm dia galvanised iron pipe light grade bracket bent to shape over all length 0.60mtr fixed to wall with 02 Nos FI clamps made of 40 x 5 mm FI, 15 cm long, 8 mm dia bolts and nuts with washers grouted in wall complete including reqd length of 1.5 Sqmm PVC multistranded BIS marked, 03 core copper conductor for connection from ceiling rose to light fittings incl testing on completion all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 12 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F MCB DB, sheet metal enclosures double door SPN 8 way with bus bar 240 volts 2 in 1 shutter type (METAL DOOR) type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

S&F, MCB SPN 40 to 63 Amps, 240 volts 'C' series 16 KA ,including connection with suitable size copper lugs complete all as specified and directed.

S&F, MCB SP 6 to 32 amp 240 volts, 40 Amps, 'C' series 10 KA including connection with suitable size copper lugs complete all as specified and directed.

S&F for modular decorative plate and provising of new modular plate of different size including fixing ,the existing modular switchs , modular socket ,modular regulator and refixing them in new board, complete all as specified and directed.

White cover plate with frame but 2/3/4 module

White cover plate with frame but 6/8/12 module