REPAIR REPLACEMENT OF INTERNAL WIRING MCBs SWITCHES SOCKETS SUBMAIN WIRING INCLUDING REPLACEMENT OF OLD US CFLTUBE LIGHT FITTING WITH LED LIGHTS AT COMMAND WKS ACE L AW SEC EDN SEC CHOC SIG SEC CASEO OPS ROOM RED QTRS AND GE OFFICE A

Amount

Taking down carefully the existing point wiring of any size/capacity and type by disconnecting from the terminals complete including fittings and fixtures such as switches, sockets,ceiling rose, regulators and light fittings etc by unscrewing and removing from site complete all as specified and as directed by engg-in-charge. Note : cost of unserviceable materials will be charged from the contractor against schedule of credit.

M & L for point wiring with 1.5 sqmm (Nominal Area)PVC insulated un sheathed multi stranded copper conductor,FRLS 1100 Volts grade single core cable, with non metalic rigid PVC medium grade duty conduit/casing capping on wall/roof for surfacing wiring but not less than 20mm dia with accessories such as junction boxes, bends, tees etc. of suitable size including sunk cast iron or pressed steel terminal box for mounting switches, sockets fan regulators etc with 3 mm thick plastic laminated sheet top cover Make : Hylem / Anchor including continuous earth wire PVC insulated 1.50 Sq mm multi stranded copper conductor, FRLS 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed by engg-in-charge for the following :-

One light /bell/fan point controlled by one 1 way switch

One three pin switch socket 5 Amps plug point on independent board

One three pin switch socket 5 Amps plug point on same board

One bell/buzzer point controlled by one bell push on independent board

All as per Item No 2 herien before but One light point controlled by two 2-way switches, with cables 1.5 sq. mm size including continuous earth wire PVC insulated 1.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by engg-in-charge.

All as per item No 2 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by engg-in-charge.

M&L for point wiring with 1.5 sqmm, single core, PVC insulated and PVC sheathed FRLS cable, 1100 volts grade IS-694 marked, with multi strandad copper conductors and earth continuity wire with similar 1.5 sqmm cable (incl connecting to earth dolly) concealed in wall including PVC conduit size of not less than 20mm and fittings/accessories all fixed to the surface of walls/ceiling, and also incl sunk type pressed steel terminal box and 3 mm thick plastic laminated sheet top covers for the following :- Note : Cost of for cutting chesing and making good to disturbed surface all as to match with existing surface are deemed to be included in quoted rate.

One light /bell/fan point controlled by one 1 way switch

One socket out let 5 Amps 5 pin on independent board

One socket outlet 5 Amps 5 Pin on same board with other switches

One bell/buzzer point controlled by one bell push on independent board

All as per item No 2 herein before but point wiring with 2.5 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps Switch including continuous earth wire PVC insulated 2.5 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by engg-in-charge.

All as per item No 2 herein before but point wiring with 4 Sqmm single core multi stranded copper conductor for one three pin socket 15 Amps on independant board controlled by one 15 Amps switch including continuous earth wire PVC insulated 4 Sqmm single core multi stranded copper conductor connected to common earth dolly complete all as specified and as directed by engg-in-charge.

Supply and fix in replacement Switch Piano, Flush Button, Single Pole, One Way, 6 Amps, 230 Volts complete all as specified and as directed by engg-in-charge. Make : Cona / lisha / Anchor

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type suitable for 240V AC complete all as specified and as directed by Engineer-in-Charge.

S&F in replacement of socket outlet 2in1, 3 pin 15/5 Amps flush type suitable for 240V AC complete all as specified and directed by Engineer-in-Charge.

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way suitable for 240V AC complete all as specified and directed by Engineer-in-Charge.

Supply and fix in replacement switch socket outlet Combination 3 pin 5 Amps 240 volts flush type complete all as specified and as directed by engg-in-charge. MAKE : ANCHAR / LISHA / Havells

Supply and fix in replacement switch socket outlet Combination 3 pin 5 Amps & 15 Amps 240 volts flush type multipurpose complete all as specified and as directed by engg-in-charge. MAKE : ANCHAR / LISHA / HAVELLS

Supply and fix in replacement ceiling rose surface type bakelite 65 x 50 mm with three terminals with ISI mark complete all as specified and as directed by engg-in-charge. MAKE : ANCHAR / LISHA / HAVELLS

Supply and fix in replacement lamp holder PVC/Poly Carbonate type suitable for batten fittings with ISI mark complete all as specified and as directed by engg-in-charge. MAKE : ANCHAR / LISHA / HAVELLS

S&F in replacement Bell push flush type 5 Amps complete all as specified and as directed by engg-in-charge. MAKE : ANCHAR / LISHA / HAVELLS

S&F in replacement steped type electronic fan regulator heavy duty flush type socket size on th existing phenolic laminated sheet complete all as specified and as directed by engg-in-charge. MAKE : ANCHAR / LISHA / HAVELLS

S&F in replacement of call bell, Ding dong type, suitable for 240V AC complete all as specified and as directed by Engineer-in-Charge. MAKE : ANCHAR / LISHA / HAVELLS

S&F in repalcement Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. 1x 20 W tube rod LED suitable for 1x 20W T/L fittings complete all as specified and as directed by engg-in-charge. Cat No : PHOTONULTRA 1213T8SSTL20WLED865SPC of Havells or Equivalent of Philips / Crompton / Polycab

S&F in repalcement Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. 1x 18 W tube rod LED suitable for 1x 18W T/L fittings complete all as specified and as directed by engg-in-charge. Cat No : PHOTONULTRA 1213T8SSTL18WLED865SPC of Havells or Equivalent of Philips / Crompton / Polycab

S&F in repalcement Ultra bright LED polycarbonate Tubelight with very high efficacy suited for installation in existing T8 fitting with G13 lamp holders. 1x 10 W tube rod LED suitable for 1x 10W T/L fittings complete all as specified and as directed by engg-in-charge. Cat No : PHOTONULTRA 603T8SSTL10WLED865SPC of Havells or Equivalent of Philips / Crompton / Polycab

S&F in replacement electronic ballast 28W suitable for 1x28 W FTLTube light fittings complete all as specified and as directed by Engineer-in-Charge. Make : Havells / Philips / Crompton

S&F in replacement electronic ballast 36/40 W suitable for 1x36/40W FTL Tube light fittings complete all as specified and as directed by engg-in-charge. Make : Havells / Philips / Crompton

S&F in replacement ballast 10W suitable for 1x10 W LED Tube light fittings complete all as specified and as directed by engg-in-charge. Make : Havells / Philips / Crompton

S&F in replacement ballast 18 W suitable for 1x18 W LED Tube light fittings complete all as specified and as directed by engg-in-charge. Make : Havells / Philips / Crompton

S&F in replacement ballast 1x20W suitable for 1x20 W LED Tube light fittings complete all as specified and as directed by engg-in-charge. Make : Havells / Philips / Crompton

S&F in replacement ballast 1x34W suitable for 1x34 W LED 2x2 fittings complete all as specified and as directed by engg-in-charge. Make : Havells / Philips / CG

S&F in replacement starter 20/40 Watt 220 V fluorescent tube lights complete all as specified and as directed by engg-in-charge. Make : Havells / Philips / Usha

S&F in replacement fan capacitor 2.5 Mfd complete all as specified and as directed by engg-in-charge. Make : Epcos / Usha / Asian / Havells

S&F in replacement fan capacitor 3.15 Mfd Make :- Epcos / Usha / Asian / Havells

S&F in replacement fan capacitor 4 Mfd complete all as specified and as directed by engg-in-charge. Make : Epcos / Usha / Asian / Havells

Supply & fix in replacement metal clad socket single pole and neutral sheet metal enclosure with and 20A earth plug and socket complete with one single pole MCB 20 amp 240 Volts complete all as specified and as directed by engg-in-charge. Make : Leagrand / Havells / Anchor / L&T

Supply & fix in replacement metal clad socket three pole and neutral sheet metal enclosure with and 32A earth plug and socket complete with one three pole MCB 32 amp 415 Volts complete all as specified and as directed by engg-in-charge. Make : Leagrand / Havells / C&S / L&T

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB SPN 240 Volts, concealed in wall such that front cover shall be seen flush with the wall surface complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / Legrand

M & L in replacement sheet metal enclosure with double door category of protection type IP-42 factory made with tinned copper 200 Amps rated bus bar suitable for MCB TPN 415 Volts, concealed in wall such that front cover shall be seen flush with the wall surface all as specified and directed. Make : Havells / L&T / Legrand

Supply and fix in replacement MCCB, 415 volts, 3 pole adjustable thermal setting type 16 KA, 63 Amps complete all as specified and as directed by engg-in-charge. Make : Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB, 415 volts, 3 pole adjustable thermal setting type 25 KA, 100 Amps complete all as specified and as directed by engg-in-charge. Make : Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB, 415 volts, 3 pole adjustable thermal setting type 25 KA, 125 Amps. complete all as specified and as directed by engg-in-charge. Make : Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB, 415 volts, 3 pole adjustable thermal setting type 25 KA, 160 Amps complete all as specified and as directed by engg-in-charge. Make : Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB ,3 pole,415V,36KA, 200 Amps with adjustable thermal setting complete all as specified and as directed by engg-in-charge. Make: Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB ,3 pole,415V,36KA,250 Amps with adjustable thermal setting.250 complete all as specified and as directed by engg-in-charge. Make: Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB ,3 pole,415V,36KA,315 Amps with adjustable thermal setting complete all as specified and as directed by engg-in-charge. Make: Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement MCCB ,3 pole,415V,50KA,400 Amps with adjustable thermal setting.complete all as specified and as directed by engg-in-charge. Make : Havells or eqvnt of L&T / C&S / Legrand

Supply and fix in replacement on-load changeover switch 415 V, 4 pole,250 A. open execution complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

Supply and fix in replacement on-load changeover switch 415 V, 4 pole, open execution , 320 A.complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

Supply and fix in replacement on-load changeover switch 415 V, 4 pole, open execution 400 A complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

Supply and fix in replacement MCCB, 415 volts, 4 pole adjustable thermal setting type 25 KA, 63 Amps complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

Supply and fix in replacement MCCB, 415 volts, 4 pole adjustable thermal setting type 25 KA, 100 Amps complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

Supply and fix in replacement MCCB, 415 volts, 4 pole adjustable thermal setting type 25 KA, 125 Amps complete all as specified and as directed by engg-in-charge.. Make : Havells / L&T / C&S

Supply and fix in replacement MCCB, 415 volts, 4 pole adjustable thermal setting type 25 KA, 160 Amps complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

Supply and fix in replacement MCCB ,4 pole,415V,36KA, 200 Amps with adjustable thermal setting complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S

S&F in repairs MCB Triple pole and neutral 6 to 32 Amps working on 415 volts 50 Hz AC supply,10 KA C series complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S / Legrand

S&F in repairs MCB single pole and neutral 40 to 63 Amps working on 240 volts 50 Hz AC supply,10 KA C series including taking out old one.complete all as specified and as directed by engg-in-charge. Make : Havells / L&T / C&S / Legrand

S&F in repairs MCB single pole 6 to 40 Amps working on 240 volts 50 Hz AC supply,10 KA C series. Make : Havells / L&T / C&S / Legrand

S & F in replacement LED tube light fitting, 1x18 w, 230v .Surface and wall mounted LED batten, 2100lm PC Body tube and aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by engg-in-charge. Cat Pat No. LUMILINEPLUSBS18WLED865SPCSS of Havells or Equivalent of Phillips / Crompton

Supply and fix in replacement of LED wall light fitting, 1x23Watt, 230v .Surface and wall mounted LED batten, elegant dia cast aluminium batten for designer homes bright LED source with uniform light out put , 2400 lm , surge protection of 2 KV with wide voltage protection 160-360 V in provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by engg-in-charge. Cat Pat No. Linea plus of Phillips / Havells / Crompton

S & F in replacement LED tube light fitting, 1x10 Watt, 230v .Surface and wall mounted LED batten,PC Body tube housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver. & connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by engg-in-charge. Cat Pat No. LUMILINEPLUSBS10WLED865SPCSS of Havells or Equivalent of Phillips / Crompton

S & F in replacement LED light fitting, 1x34 w, 230v .2x2 recessed mounted Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by engg-in-charge. Cat Pat No.PLUTONEO2X2PLR34WLED840S of Havells Crompton / Philps

Supply and fixing in replacement of wall mounted LED bulk head fittings, 10 watt, warm white,, 230 Volts, Environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge-lit LED luminaire comprising of high brightness LEDs.,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete complete all as specified and as directed by engg-in-charge. Make: Havells catpart No RUGBYNEONFT10WLED860SSYMTOPC or Philips / Crompton

S & F in replacement LED light fitting, 1x15 w, 230v .downlight recessed mounted the Edgepro range of Slim-Fit low profile downlights are engineered to deliver superior light output and uniformity utilising the latest edge-lit LED technology. An ideal solution where ceiling voids are limited but high lumen output Environmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling.genaral purpose squre shaped luminaire with high transmitivity diffuser suitable for office application with profiled & flat diffuser fiited on ceiling connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed by engg-in-charge. Cat Pat No.EDGEPROSQDLR15WLED840S of Havells Crompton / Philps

S& fix energy efficient post top light 25 Watt New generation, post-top, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source.. including all necessary wiring LED bulb , clamps, nut and bolts mounting acessories etc complete all as specified and as directed by engg-in-charge. Make : Havells Cat Part No:CORALPT25WLED757PSYMTOPC or Equivalent of CG / Philips

S& fix energy efficient pedestal light/bollard light 8 watt fitting on wall/gate high quality Cone series acts as a imposing street furniture.The elegant yet minimalsitic design acts a silent observer and giving light, diffuser at the upper portion acts a beacon of path guidance in a landsacpe environment. LED bulb , clamps, nut and bolts mounting acessories etc complete all as specified and as directed by engg-in-charge. Make : Havells Cat Part No: CONEBL8WLED857SSYMTOPC or Philips / CG

S& F in replacement of Decorative, wall mounting, SS finish fixture with opal glass diffuser suitable for 40W mini GLS lamp and 8W TU retrofit CFL. Fitting on wall including necessary electrical connection and mounting items complete all as specified and as directed by engg-in-charge. Make : Havells Cat Part No : 1x8 W CFL TU/ 40 W Mini GLS E14 or Philips / Crompton

S& F in replacement sub main wiring with two single core PVC insulated unsheathed cable 1100 volts FRLS grade with multi strand copper conductor and drawn through and including PVC conduit along with continuous earthing wire but in green colour complete on surface/concealed and connected to common earth dolly of the following size complete all as specified and as directed by engg-in-charge. Note : Three run of PVC cable and one run of PVC conduit shall be measured as one unit length.

4 Sqmm ( 2 single run of 4 Sqmm and one run of 4 Sqmm as earth wire)

6 Sq.mm ( 2 single run of 6 Sqmm and one run of 6 Sqmm as earth wire)

10 Sq.mm ( 2 single run of 6 Sqmm and one run of 10 Sqmm as earth wire)

4 Sq.mm ( 4 single run of 6 Sqmm and one run of 4 Sqmm as earth wire)

6 Sq.mm ( 4 single run of 6 Sqmm and one run of 6 Sqmm as earth wire)

Taking down of ceiling fan/ exhaust fan dismantling of blades, transportation to work shop,to carry out repairs and bring back to the site, reinstallation in original position and testing complete all as specified and as directed by engg-in-charge. Note : repairs to ceiling/exhaust fan shall be measured and paid under respective item of this Schedule.

M&L for dismantling / opening of ceiling fan motor assembly any sweep inspecting all dismantled parts repairing, replacing the unserviceable parts and components with new one to the extent required including oiling, greasing, reassembling motor assembly complete all as specified and as directed by engg-in-charge. Note : Spare parts shall be measured and paid at supply only rates separately under relevant items of this schedule.

M&L for rewinding of ceiling fan motor 1200 mm / 1400 mm sweep with super enameled copper winding wire of suitable gauge after cutting and removing burnt winding varnishing new winding drying up carefully complete all as specified and as directed by engg-in-charge.

M&L for preparing old painted surface of ceiling fan of any sweep and spray painting evenly and thoroughly with synthetic enamel paint of approved color and quality including writing MES Number on painted surface of ceiling fan with synthetic enamel paint of approved color and quality complete all as specified and as directed by engg-in-charge.

Supply only rubber reel suitable for ceiling fan.

Ball bearing (6201/6202/6203) suitable for ceiling fan of 1200/1400mm sweep. Make : SKF / TATA

Supply only bush Gun metal suitable for ceiling fans complete all as specified and as directed by engg-in-charge.

M&L for dismantling / opening of Exhaust fan motor assembly any sweep inspecting all dismantled parts repairing, replacing the unserviceable parts and components with new one to the extent required including oiling, greasing, reassembling motor assembly all as specified and directed. Note : Spare parts shall be measured and paid at supply only rates separately under relevant items of this schedule.

M&L for rewinding of exhaust fan motor 300 /450 mm sweep with super enameled copper winding wire of suitable gauge after cutting and removing burnt winding varnishing new winding drying up carefully all as specified and directed

M&L for preparing old painted surface of exhaust fan of any sweep and spray painting evenly and thoroughly with synthetic enamel paint of approved color and quality including writing MES Number on painted surface of ceiling fan with synthetic enamel paint of approved color and quality all as specified and directed.

Supply only rubber reel suitable for exhaust fan complete all as specified and as directed by engg-in-charge.

Ball bearing suitable for exhaust fan of 450/300 mm sweep complete all as specified and as directed by engg-in-charge.

Supply only bush Gun metal suitable for exhaust fans complete all as specified and as directed by engg-in-charge.

Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers cleaned connected to and including GI earth wire 4 mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c both ways and PCC chamber pit with pcc 1:2:4 Type B2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part -I 2009

Earthing complete with GI earth electrode of size 60cmx60cmx6mm buried directly in ground vertically at a depth not less than 2.25 metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground surrounded from all sides by 15cm thick and packed layer of charcoal dust and conmmon salt filling in alternate layers cleaned connected to and including GI earth strip 32 x 6mm size upto 7.5 mtr by means of bolts, nuts, check nuts and washers made of galvanised iron and protected light grade 50mm dia 5 mtr long GI pipe connected to main control board and GI pipe light grade 20mm bore for watering and including funnel wire mesh, RCC pit cover 50mm thick with 10mm dia reinforcement 100mm c/c both ways and PCC chamber pit with pcc 1:2:4 Type B2 (including excavation and earth work disposal of surplus soil to a distance not exceeding 50 metre) and testing after completion all as specified and shown on plate No 3 of SSR Part -I 2009

S & F ceiling fan HS décor 5 star rating , 1200 mm Sweep 240 volt , Opal . White/brown including rod minimum length 1.5 m and bush , nut bolts , capacitors including all acessories complete all as specified and as directed by engg-in-charge. Make : Havells ES 50 Premium or equivalent in Orient/Khathan / Crompton / Bajaj.

S & F Wall Fans , 400 mm Sweep 240 volt White/brown fiting on wall all acessories complete all as specified and as directed by engg-in-charge. Make : Havells of sameera or equivalent in Orient / Khathan / Crompton / Bajaj / luker.

S & F Exhaust Fan 300 mm 1400 RPM sweep plastic body fitting on wall wih lower and making hole after fitting making good distribution with paint including flap, louvers all acessories complete all as specified and as directed by engg-in-charge. Make : Havells, Turbo Force SP or equivalent in Orient/Khathan / Crompton / Bajaj / luker

S & F Heavy duty Exhaust Fan 380/450 mm 1400 RPM metal body sweep fitting on wall wih lower and making hole after fitting making good distribution with paint including all acessories complete all as specified and as directed by engg-in-charge. Make : Havells / Turbo Force SP or equivalent in Orient / Khathan / Crompton / Bajaj / luker

Supply only 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts (Flame Retardant Low Smoke & Halogen FR-LSH) Industrial Cables with multi strand copper conductor complete all as specified and as directed by engg-in-charge.

Supply only 2.5 Sqmm single core PVC insulated unsheathed cable 1100 volts (Flame Retardant Low Smoke & Halogen FR-LSH) Industrial Cables with multi strand copper conductor complete all as specified and as directed by engg-in-charge.

S&F in replacement ceiling fan Down rod of 1' height fabricated out of MS pipe 12mm dia heavy duty inculding making holes duly painted with white paint complete all as specified and as directed by engg-in-charge.

S&F in replacement ceiling fan Down rod of 2' height fabricated out of MS pipe 12mm dia heavy duty inculding making holes duly painted with white paint complete all as specified and as directed by engg-in-charge.

Supply and fix in replacement Stellar Bright Linear Bulb Swivel body action for better focus LED Bulb 10 watt Pin type complete all as specified and as directed by engg-in-charge. Make : Philips / Luker / Havells

Supply and fix in replacement LED Bulb 14 watt holder/pin type complete all as specified and as directed by engg-in-charge. Make- Philips / Luker / Havells

Supply and fix in replacement LED Bulb 23 watt Pin/holder type complete all as specified and as directed by engg-in-charge. Make : Philips / Luker / Havells

S&F in repairs socket outlet 3 pin 05/15 Amps 240 volts modular type complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 1 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 2 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 3 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 4 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 6 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular white cover plate with frame 8 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 1/2 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 3 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 4 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs modular metal flush box frame 8 module complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

S&F in repairs fan regulator 120W,-2 module modular type complete all as specified and as directed by engg-in-charge. Make : Roma / MK / Legrand

Note for item Sl No. 8 to 102 :- (a) The Skilled electrician - 01 Nos alongwith 01 Nos helpers shall be arranged by the contractor for fixing in replacement of the items as specified here-in-above under srl item nos 8 to 102 on daily basis from 0900 hrs to 1700 hrs and the staff should report to the concerned JE E/M daily twice a day at 0900 hrs and at 14.00 hrs for collection of the complaints/details of defective electric fittings and fixture alongwith the bldg no/location and completion there of. The cost there of shall deemed to be included in the item rates. (b) Please note that if electrician of helper is found absent from duty Rs 800/- per electrician and Rs 400/- per helper or part as applicable shall be deducted from contractors due amount in this regards GEs decision shall be final and binding.

M/S MG GROUP

Amson electronics

M/S LADPURIA ENTERPRISES

J.P. Enterprises

blue max associates