Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.9 LAccepted-AOC | L1 | Accepted-AOC Awarded Being Lowest Bidder | |
| 2 | L2₹40.4 L+₹1.5 L (3.90%)Rejected-AOC | L2 | Rejected-AOC Rejected | |
| 3 | L3₹41.3 L+₹2.5 L (6.39%)Rejected-AOC | L3 | Rejected-AOC Rejected | |
| 4 | L4₹41.6 L+₹2.7 L (7.02%)Rejected-AOC | L4 | Rejected-AOC Rejected | |
| 5 | L5₹43.7 L+₹4.8 L (12.4%)Rejected-AOC | L5 | Rejected-AOC Rejected |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer North Ahmednagar
Military Engineer Services Garrison Engineers (North) Nagar Pathardi Road Ahmednagar Fort Ahmednagar 414 002
Comprehensive repair/maint and misc works including welcome maint for Officers MD accn in the area of AGE B/R-I under GE (N) Ahmednagar
2022_MES_528936_2
8635 / E8
Open Tender
Miscellaneous Works
Item Rate
180 days
Ahmednagar
Class D Cat a(I)
8 documents required · 8 mandatory
₹500
Yes
Garrison Engineer North Ahmednagar
₹98,000
Yes
8 Aug 2022
7 Jul 2022
29 Jul 2022
7 Jul 2022
27 Jul 2022
12 Jul 2022
60 days
Amount
Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc laid and bedded in any mortor etc complete all as specified and directed by Engineer-in-Charge
Demolition of plain cement concrete (unreinforced) in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge
Demolition of plain cement concrete solid block masonary built in cement and sand mortar etc complete all as specified and directed by Engineer-in-Charge
Dismantling of asbestos cement (corrugated semi corrugated) sheets in roof covering etc complete all as specified and directed by Engineer-in-Charge
Demolition of reinforced cement concrete in ground floor not exceeding 15 cm thick etc complete all as specified and directed by Engineer-in-Charge
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including similar pattern roof /wall coverings etc complete all as specified and directed by Engineer-in-Charge
Taking down chowkats or frames exc 1.5 Sq m but nexc 4.00 sqm with shutters (without taking off shutters from the frames) etc complete all as specified and directed by Engineer-in-Charge
All as per Item No. 7 (here-in-bfore) but n.exc 1.5 sqm
Taking down shutter exceeding 1.00 sqm but not exc 2 sqm etc complete all as specified and directed by Engineer-in-Charge
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 75 mm thick plain cement concrete 1:4:8 type D2, using 40 mm graded stone aggregate as in sub base etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 100 mm thick reinforced cement concrete 1:2:4 type B2, using 40 mm graded stone aggregate as in sub base, floor including all necessary formwork etc complete all as specified and directed by Engineer-in-Charge
S&F Mild steel TMT bars 6mm to 8mm dia in distribution, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips incld cutting & removal of old decayed reinforcement etc complete all as specified and directed by Engineer-in-Charge
Material and labour for 75mm thick PCC (1:3:6) type C-2 using 40mm graded mechanically crushed stone aggregate as in plinth protection finished even and smooth without using extra cement with & including 10mm wide, 30mm deep joints at the rate of 3.00 mt centre to centre and at every turning & filling the joints with bitumen & sand mixture complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles, 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floor laid over and including 15 mm thick screed bed in cement and sand mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
M&L for Non skid ceramic coloured tiles 7 to 8 m thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set of jointed in neat cement slurry & pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
M & L for for glazed ceramic coloured tiles of size 350 X 250 mm X 7 mm/450x350x7mm thick on vertical surfaces as in dados laid over and including a backing coat of 10 mm thick in cement and sand mortar (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
Material and labour for Digitally printed paver tiles 300mm x 300mm having thickness of 10 mm thick of with grey cement and pigment, machine pressed, factory made, set, jointed and pointed in neat cement slurry in floors laid over and including screed bed 15mm thick in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge Make : Dura Stone by Somany / Endura by Johnson or equivalent as approved by GE.
Material and labour for Vitrified ceramic tiles double charge/ultra charge ,10 mm thick of size 600 x 600 mm of any shade as approved by GE in floor etc laid over and including roughning existing surface , making good the damaged surface, levelling, and fixing with cement based tile adhesive ( Make FOSROC, DR FIXIT) as per the manufecturer's instructions and pointed in white or coloured cement to match the shade of tiles etc complete all as specified and directed by Engineer-in-Charge
All as per item No 19 (here-in-before) but on skirting
M&L for providing and laying 60mm thick factory made chamfered edge cement concrete glossy finished paver block of M-35 grade with approved colour, design & pattern as in foot parth, parks, lawns, drive ways or light traffic parking etc.,of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of interlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and directed by Engineer-in-Charge
Material and labour in repairs for granite slab, 18-20 mm thick laid over and including 15 mm thick screed in cement and sand mortar (1:6), jointed and pointed with coloured cement to match the shade of slab on kitchen platform and shelves including grinding and polishing the exposed edges etc complete all as specified and directed by Engineer-in-Charge
Material and labour for machine cut cudappah stone slab 20-25 mm thick, laid over and including 15 mm thick screed bed in cement and sand mortar (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc complete all as specified and directed by Engineer-in-Charge
Material and labour for soild block masonry built with plain cement concrete (1:3:6) solid blocks, type C1, using 20 mm graded stone aggregates built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
Material and labour for rendering, 15 mm thick on stone/brick / concrete surfaces in cement and sand mortar (1:6) surfaces finished even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge
Supply and fix asbestos cement corrugated or semi currugated sheets, 6 mm thick in roofs, walls fixed with 'L' type or 'J' type or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge
S&F asbestos cement plain angular ridge 6 mm thick fixed with L type or J type or cranked hook bolts etc complete all as specified and directed by Engineer-in-Charge
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge
S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of any colour having tenstile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs vitreous China wash down water closet pan (pedastal pattern) including plastic water closet seat (black), closed pattern with flat bottom and cover, aluminium hinged device, connecting to 'P' or 'S' trap, flushing and ante syphonage pipe etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistern etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs wash hand basin vitreous China, flat back of size 450 X 300 mm including a pair of brackets, PTMT waste coupling, 32 mm dia PVC flexible waste pipe and connecting to stop valve and nahani trap etc complete all as specified and directed by Engineer-in-Charge
Supply and fix pressed steel frames of size 105 mm X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed by Engineer-in-Charge
Material and labour for filling in door frames in plain cement concrete, 1:2:4 type B0, using 12.5 mm graded aggregates etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 2 nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 35 mm thick factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial plywood on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed by Engineer-in-Charge
Supply and fix 35 mm thick factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) etc complete all as specified and directed by Engineer-in-Charge
Supply and fix for 30mm thick Flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides etc complete all as specified and directed by Engineer-in-Charge
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix factory made solid PVC door shuttuer 30 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails frame shall be covered with heat moulded plain coloured PVC `C' channel having a PVC sheet strip of 20 mm width stuck and plain colour PVC sheets for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the mild steel frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame all as directed.
Material and labour for second class hard wood beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc.and removing old beads etc complete all as specified and directed by Engineer-in-Charge
Supply and fix galvanised mild steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staples etc complete all as specified and directed by Engineer-in-Charge
Supply and fix mild steel butt hinges medium weight cold rolled of size 125mm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix stainless steel butt hinges medium weight cold rolled of size 100mm etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section of cast aluminium alloy and fixed 300mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised barrel tower bolt of extruded section 200mm long etc complete all as specified and directed by Engineer-in-Charge
Supply and fix aluminium anodised handles of extruded section 150mm long etc complete all as specified and directed by Engineer-in-Charge
supply and fix mild Steel 20 mm dia decorative stainless steel curtain rods with fixing brackets fixed in repairs etc complete all as specified and directed by Engineer-in-Charge
Supply & Fix in repair health faucet with 8mm dia, 1.00 mtr flexible tube wall mountained / hooked etc complete all as specified and directed by Engineer-in-Charge
Supply and fixed in repairs 32 mm dia PVC waste pipe(outlet pipe) plain fixed to waste coupling of WHB or Sink etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs stainless steel kitchen sink with drainage board over all size 915 X460mm bowl size 410mmx330 mmx160mm, made out of 1.00 mm thick SS sheet of high quality including a pait of brackets, waste coupling, plug and chain, 32 mm dia PVC flexible waste pipe and nahani trap etc complete all as specified and directed by Engineer-in-Charge
S&F in repair wall mixture, 3-in-1 with provn for both telephonic shower /over head shower etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs toilet paper holder of brass, chromium plated etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs bib tap, 15 mm dia, cast copper alloy chromium plated fancy type with capstan head screwed down for iron pipe or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs, stop valve, 15 mm dia, cast copper alloy, fancy type chromium plated with long shank and cup (concealed type), screwed down high pressure with capstain head screwed both ends for iron pipe or for unions etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge
Supply & fix in repairs brass cromium plated shower rose 125mm size etc complete all as specified and directed by Engineer-in-Charge
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe etc complete all as specified and directed by Engineer-in-Charge
All as per item No 58 (here-in-before) but 20mm dia pipe.
Supplying and laying of 16 mm Outer Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge
Supplying and laying of 20 mm Outer Dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs, 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets,tees,elbows,reducers,unions etc fixed to walls/ceiling etc complete all as specified and directed by Engineer-in-Charge
Supply and fix in repairs stainless steel grating, 110 mm dia etc complete all as specified and directed by Engineer-in-Charge
S&F PVC connections 15 mm size with PTMT nuts of length 450 mm etc complete all as specified and directed by Engineer-in-Charge
S&F in 8 mm thick semi circular glass for shelves in cornerwith chamferred edges incl connectedbrackets n. exc 0.35 m in radius etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs decorative towel ring chromium plated 150 mm dia fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge
S&F in repairs tubular towel rail CP 20mm dia D type 60cm long both flanges brass chronum plated etc complete all as specified and directed by Engineer-in-Charge
S&F PVC mirror cabinet of size 16" X 16" with napkin rail in white colour etc complete all as specified and directed by Engineer-in-Charge
Hacking out old broken glass (any thickness size,quality or description) from wooden frames or stone, concrete or brick surrounds glazed with putty or fixed with beads exc 1.5 Sqm incl S&F sheet glass ordinary quality 3mm thick glazing with oil putty in square n'exc 0.5Sqm in each pane etc complete all as specified and directed by Engineer-in-Charge
Material and labour for glazing with 3 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc 0.50 sqm in each pane etc complete all as specified and directed by Engineer-in-Charge
M&L for cleaning and removing all scale and dirt, etc from tanks capacity of tank exc 500 ltr but not exc 1000 ltr and from mouth of circulating pipes etc complete all as specified and directed by Engineer-in-Charge
Dismantling of water tanks from any position/location, of any make etc,of capacity exc 500 Ltr & n.exc 1000Ltr with ball valve, etc complete all as specified and directed by Engineer-in-Charge
Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 500 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge
Supply and fix rotational moulded polyethylene water storage tanks double layer ISI marked conforming to IS 12701-1996 (cylindrical vertical with closed top) and made out of virgin FDA approved polyethylene material of 1000 litres capacity hoisted and fixed in position including 20 mm dia ball valve, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed to iron pipe and connecting etc complete all as specified and directed by Engineer-in-Charge
S&F 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge
M&L for block board, 19/20mm thick, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, fixed with screws to timber frame work etc complete all as specified and directed by Engineer-in-Charge
M&L plain fillets, square, rectangular or triangular in section, wrought, secured with nails or brads, sectional area exc 3 & n.exc 6 Sq.cm of 2nd class hard wood etc complete all as specified and directed by Engineer-in-Charge
Dismantling of wall and ceiling board (fibre,pulp,insulation etc) any thickness including cover fillets etc complete all as specified and directed by Engineer-in-Charge.
S&F powder coated aluminum alloy interlocking snap grid 600mmx600mm consists of min tee runners of size 38mm x 25mm x1.5mm and cross Tee of size 25mm x 25mm x 1.5mm spaced between the main Tee at 600mm centre to cntre to form a grid of 600mm x 600mm etc complete including GI wire hangars at 1200 mm intervals all as specified as per manufacturere's instructions and etc complete all as specified and directed by Engineer-in-Charge
M&L for 4mm thick non asbestos fibre cement building boards of make 'E' board classic designer board (cascade or Occenic) of M/s Everest Industries Ltd or equivalent makes mentioned in list of makes in Appendix `C' fixed or laid/inserted to timber/GI/Aluminium frame work with etc complete all as specified and directed by Engineer-in-Charge
Taking down steel windows / ventilators, of any description and size each etc complete all as specified and directed by Engineer-in-Charge
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge NOTE: Wire cloth, glass, guard bars and painting shall be measured and paid separately.
S&F for rolled mild steel in trusses (framed), trussed, purlins, (beam, tee, angle) channel or flat sections including distance pieces, cleats etc, with Fe 410-W (Gde E-250) quality -B etc complete all as specified and directed by Engineer-in-Charge
S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge.
S&F powder coated anodised aluminium glazed window shutter side hung / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m aluminium open track section having reqd size of style and top rails, bottom rails including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) etc complete all as specified and directed by Engineer-in-Charge (Note : Glass will measured and paid separately)
S&F powder coated anodised aluminium glazed / gauzed window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc complete all as specified and directed by Engineer-in-Charge (Note : Glass / wire mess will measured and paid separately)
S & F in repairs for 10 litre capacity PVC valveless syphonic action type flushing cistern high or low level (exclusive of brackets) white with inlet ball valve, float and handle inlcuidng brackets etc complete all as specified and directed by Engineer-in-Charge
Dismantling of single layer Mangalore pattern or similar tiles in roofing etc complete all as specified and directed by Engineer-in-Charge
Dismantling of battens for tiles, shingles etc, of any size including tilting fillets spaced exc 15 cm etc complete all as specified and directed by Engineer-in-Charge
M&L second class hardwood clean swan battens at 30 cm centres, section area exc 5 & n.exc 15 sq. cm etc complete all as specified and directed by Engineer-in-Charge
M&L for roof tiles, Mangalore Pattern, interlocking at side joints, laid dry etc complete all as specified and directed by Engineer-in-Charge
All as per item No 92 (here-in-before) here-in-before but except tiles
M&L for ridge or hip tiles to suit, Mangalore Pattern of roofing tiles, bedded and jointed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge
S&F soap dish chromium plated fixed to plugs with CP brass screw fixed in repairs etc complete all as specified and directed by Engineer-in-Charge
S&F 110 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge
S&F 75 mm dia PVC SWR pipe, single socketed in any length with rubber ring joints fixed with clamps to walls etc complete all as specified and directed by Engineer-in-Charge
S&F 75 mm dia PVC (SWR) vent cowl etc complete all as specified and directed by Engineer-in-Charge
S&F 110 mm dia PVC (SWR) bend any radius etc complete all as specified and directed by Engineer-in-Charge
S&F 110 mm bore PVC (SWR) branch piece double (single Y) equal or unequal etc complete all as specified and directed by Engineer-in-Charge
Filleting in any position and any shape in cement and sand mortar (1:4) including mitered stop etc sectional area of fillets not exc 10 sqcm as in for dado/ skirting top.
Material and labour for special treatment ot sunken portion with 10mm thick plaster in cement and sand mortar (1:4) with WPC liquid complast 421 and applying one coat each of Nittoproof 120 on plastered surface rendering again 10mm thick in cement and sand mortar (1:4) mixed with complast - 421 filling the sunken floor with PCC 1:5:10 using brick bat area of floor upto 1.5 Sqm including 40 mm dia 0.60 m pipe etc complete all as specified and directed by Engineer-in-Charge Note : Work has to be carried out strictly by the authonticated applicator of the manufacturer and as per manufacturers specification as approved by GE.
All as per Item No 102 (here-in-before) but for kitchen area n exc 0.50 sqm on plan.
M&L for preparation of old plastered or unplastered surfaces of walls including cornices etc by brooming down and applying one coat of white wash at any height incl scafolding etc complete all as specified and directed by Engineer-in-Charge
All as per Sl item No 104 (here-in-before) but on ceiling.
M&L for Preparation of old surfaces of walls, washing down and applying one coat of Oil bound distemper (OBD) with roller finish at any height incl scafolding etc complete all as specified and directed by Engineer-in-Charge
M&L for preparation of old decorated surfaces of wall washing down and applying two coats of oil bound distemper (OBD) finishing with roller finish at any height incl scaffolding etc complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices etc by brooming down and applying one coat of cement based paint at any height incl scafolding etc complete all as specified and directed by Engineer-in-Charge
Material and labour for applying one coat of synthetic enamel paint for old wooden surfaces of any description exc 10 cm width or girth including preparation of surfaces etc complete all as specified and directed by Engineer-in-Charge
All as per item No 109 (here-in-before) but on steel surface.
M&L for preparation of old surfaces of walls, washing down and applying one coat of luster paint with roller finish at any height incl scaffolding etc complete all as specified and directed by Engineer-in-Charge
M&L for Complete removal of existing treatment on plastered surface and applying a layer of POP putty or 2mm thick wall putty over a plastered surface to prepare the surface even and smooth at any height incl scaffolding etc complete all as specified and directed by Engineer-in-Charge
M&L for Preparation of old plastered or unplastered surfaces of walls including cornices etc by brooming down and applying one coat of weather proof emulsion (Apex) paint at any height incl scafolding etc complete all as specified and directed by Engineer-in-Charge
M&L for cement wash with portland cement slurry to a smooth bodied opaque finish at any height including scafolding etc complete all as specified and directed by Engineer-in-Charge
M&L for French polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats at any height incl scafolding etc complete all as specified and directed by Engineer-in-Charge
Removal of wild growth/plants/shurbs on external surface of bldg at any height upto roof level of bldg including making good the disturbed surface with cement and sand mortar (1:4) with water proofing compound as per manufactures instructions etc complete all as specified and directed by Engineer-in-Charge
An amount of Rs 94,350.00 shall be deducted from BOQ on account of schedule of credit
M/S. M. F. Sharif & Co.
M/S-B.R.SONAWANE
M/s AG PATHAN
OM SAI ASSOCIATES
M/s A G Gund
Ms. M.D. Auty
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .