Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.9 LAccepted-AOC 221 3 SALT LAKE SECTOR II KOLKATA 700091 | KOLKATA | KOLKATA | WEST BENGAL | 700091 | L1 | Accepted-AOC 1st lowest | |
| 2 | L2₹35.7 L+₹3.8 L (11.9%)Rejected-Finance VILL MADPUR PO MADPUR PS KHARAGPUR LOCAL DIST PASCHIM MEDINIPUR | MADPUR | PASCHIM MEDINIPUR | WEST BENGAL | 721149 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹40.0 L+₹8.1 L (25.3%)Rejected-Finance PATPUR P O DIST BANKURA | BANKURA | BANKURA | WEST BENGAL | 722101 | L3 | Rejected-Finance 3rd lowest | |
| 4 | L4₹43.8 L+₹11.8 L (37.1%)Rejected-Finance NUTANCHATI BHOWMIK GATE BANKURA | BANKURA | L4 | Rejected-Finance 4th lowest | |
| 5 | L5₹43.8 L+₹11.9 L (37.2%)Rejected-Finance PATPUR BANKURA | BANKURA | BANKURA | WEST BENGAL | 722101 | L5 | Rejected-Finance 5th lowest |
Tender Value
Refer Docs
EMD Value
₹87,687
Closing Date
26 Jul 2023, 12:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EE, Bankura Electrical Division
PWD Compound, Kenduadihi, Near Bhairabsthan,Bankura-722102
Electrical Repairing and Renovation works at New Integrated Govt. School(Santali Medium), Dhekikata, Raipur, Bankura.
2023_WBPWD_546862_1
WBPWDTE/EE/BED/NIQ_04/Q of 2023-24-2nd Call Tender
Open Tender
ELECTRICAL WORKS ORG
Item Rate
45 days
Bankura Electrical Division
Please refer Tender documents.
3 documents required · 3 mandatory
₹87,687
28 Aug 2024
12 Jul 2023
28 Jul 2023
12 Jul 2023
26 Jul 2023
12 Jul 2023
Amount
Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand/ Siemens/Schneider/L&T of the following sizes as to GS. (For HS School Building - 2nos) 4 way Enclosure upto 160 Amp
Supplying and fixing 415 V four pole MCCB of breaking capacity 25kA/35kA with fixed thermal and fixed magnetic/adjustable thermal and fixed magnetic setting in existing DBs/ enclosure and necessary connection Legrand/ Siemens/Schneider/L&T as to GS. 125 Amp
Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection Legrand/ Siemens/Schneider/L&T , as to GS. 415 V, 63A FP
Supplying and fixing 240/415V, MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection Legrand/ Siemens/Schneider/L&T as to GS. 6A - 32A SP MCB
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (approved make) partly in 20mm size PVC rigid conduit 'FR' (Precision make) [for ceiling portion only] and in 19mm bore, 3mm thick polythene pipe [for horizontal & vertical run embedded in wall], with 1x22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board on wall complete with 2 no. “Ph & N” copper bar with holes fixed on bakelite/hard rubber insulation over the welded chairs incl. bakelite/ Perspex top cover 3 mm thick and incl. 175x100x65 inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [only PVC Rigid Conduit on ceiling and remaining portion concealed] [E-15/5(d)] Average run 9 mtr
Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FRLS ' PVC insulated & unsheathed copper wire(Finolex/ Havells /RR Kabel /Gloster/approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI / Mescab /Gloster) as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box andmending good the damages to original finish On Board
Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required. 150 mm x 100 mm x 65 mm
200 mm x 150 mm x 65 mm
Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite /perspex cover and making necessary connections as required
Supplying of following sizes Al. armoured PVC/XLPE (Havells/ Glostar/KEI /RR Kabel) as per direction of EIC 4 core 10 sqmm (For Street Lights )
4 core 16 sqmm (For Street Lights & Glowsign Board)
4 core 35sqmm ( from Panel to Girls Hostel & feeder piller )
4 core 50 sqmm ( from Panel to Boys Hostel)
4 core 95 sqmm ( from Panel to HS School Building C/O Switch )
Laying of cable as below, after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish From 2.5 sqmm to 35 sqmm at an average depth of 75 mm in floor/pavement/wall etc.
Above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc.
Laying of one No. cable of following sizes in underground trench 460mm wide x 760mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed Upto 35 sq mm
above 35 sq mm upto 185 Sqmm
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4 core 10 sqmm
4 core 16 sqmm
4 core 35 sqmm
4 core 50 sqmm
4 core 95 sqmm
Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 core 10 sqmm
4 core 16 sqmm
4 core 35 sqmm
4 core 50 sqmm
4 core 95 sqmm
Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 40 mm dia
80 mm dia
Supply & Delivery of AC 240V 50 Hz 48" sweep (1200 mm) ceiling fan complete with down rod , Canopy, fork incld. safety wire & S3/P2 Capacitor of suitable gauge with out regulator, (Make- Usha (Striker 1 Star ) / Crompton Greaves (HS Plus 5 star) /Orient ( 5 Star ) and as per direction of EIC as per direction of EIC
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.
Supplying & Fixing MS fan clamp of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting
Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/ perspex top cover by after making housing for regulator by cutting bakelite top cover incl. making necy. connections etc. as per G.S.
S&F angular holder (Anchor) on 3" wooden double round block incl. S&F 9 Watt LED lamp (Make:-Philips / Crompton / Wipro /Bajaj) as per direction of EIC
Supplying & Delivery 4 feet single commercial LED type fluorescent light fittings complete with all accessories with 1 x 20 Wt.Master LED Tube lamp similar to Philips make cat No. TMC-501 P 1xTLED 22 WP3241 corresponding to Wipro / Bajaj / Crompton as per direction of EIC
Supplying & Delivery 4 feet twin commercial LED type fluorescent light fittings complete with all accessories with 2 x 20 Wt.Master LED Tube lamp similar to Philips make cat No. TMC-502 P 2xTLED 22 WP3242 corresponding to Wipro / Bajaj / Crompton as per direction of EIC
Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm ) flexible copper wire of 1.10 mt. length.
Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.
Supply & Delivery 240 V,50 Hz, Metal body Heavy duty Exhaust fan of following sizes and RPM (Make -- EPC/Crompton/USHA /Calcutta Fans or any approved and recognised brand by EIC) 12" (30 cm), 1375 RPM
Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following dia incld. Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) 12" (30 cm), 920 RPM
Supply & fixing of 72 W LED outdoor street light fitting( Philips /Crompton-Cat no- CRP-411-100-57-HL2-GL-NSG/Wipro / Bajaj/Havells make ) on existing pole arm with sutable nuts,boults,screws etc as per direction of E.I.C.
Supply and fixing of Gate Top LED light fitting 30W compl. With all accessories to be fixed on existing location and making neccy. Connection( Philips /Crompton-Cat No-LPTO-40-WW/Havells make ) as per direction of EIC. [NS]
Supplying & Fixing of PVC water proof type Loop box (Make-Sintex) of size 8"X10" comprising of 4 way 100 Amp. Capacity brass stud/terminal make- AC /DC.,having hinged PVC top cover & 4 mm thick with rubber gasket lining,railway type mechanical locking arrangement,comprising of one 250V,15A kit-kat fuse unit,one NL on porcelain insulator etc. conceal in wall as per direction of EIC
Inter connection between loop box to fittings by 1.1KV 3X 1.5sqmm single core strandred 'FRLS' PVC insulated & unsheathed copper wire (Finolex/ Havells/KEI / RR Kabel/Gloster) laying through PVC rigit Conduit (Make: Precision) incld.neccy. fittings as per direction of EIC.
Providing CC (6:3:1) muffing 600x600x760 mm in size or equivalent size of cylindrical muffing above ground level around the pole base complete with 3mm thick neatly finished cement plaster all round after dismantling the unserviceable muffing if necessary(without loop box)
Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint(Upto 9.0 mtr. long pole) 1st coat of aluminium paint over 1 coat of RO priming
2nd coat of aluminium paint over 1st coat
Supplying and fixing 415V, TPN SFU with sheet steel enclosure on flat iron/angle iron frame on wall with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (Make-L&T / Havells/Siemens) 63A
Supplying and fixing 415V, TPN SFU open execution in existing SS enclosure/cubical with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. ( fixing on existing cubical panel) (Make-L&T / Havells/Siemens) 63A
Supplying and fixing 415V, TPN on load front operated Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc (Make-L&T / Havells/HPL, Standard) 63A
Feeder Pillar Panel Out Side of : Supply and Installation of Feeder Pillar box of suitable sizes and appx 600 mm.depth The of the pillar box is to be made from 12 SWG (total outer side , top , bottom gland plate etc, ) & 14 SWG ( inner side only ) CRCA Sheet , suitable sizes MS angle (four side of base, legs etc. to be fixed by nuts, bolts, necy welding etc.) The pillar box should have double door opening from front fitted with suitable handle on each door leafs (two handle on each side ) & also have ventilation arrangement with louvers & brass wire mess net at the top of door leafs having two sides fully protected with close wire mesh of Brass net. Special almirah type lock with key should be provided & the Panel board to be get inspected by EIC -- Additional arrangement for pad lock is also to be provided on the doors. The provision of earth terminals with earth bolt at both sides & also provision of MS lifting lug at the two corners are to be provided. Pillar box is to be painted with two coats of synthetc enamel paint over one coat of RO Primer after finishing the surface properly. The all fabrication work should be done as per drawing & direction of EIC. The base plate of the Feeder Pillar should be detouch able gland plate type having incoming-out going arrangement for cable entry arrangement. The Pillar box should incorporate the following electrical accessories with inter connection with suitable size copper wire incl. finishing the ends by proper socketing & taping:- Incoming Arrangement. b) Supplying and fixing of Switch Disconnector fuse ( in sheet metal enclosure type) conform to IS : 13947 three pole & Neutral AC 23A, 50HZ, 415 Volt 63 Amp with 3 nos 63Amp DIN type HBC fuse link ( Make L&T / SIEMENS ) ----1 No. Bus Section: Supply and Fixing of 100 Amp capacity and 99.9% - 99.5% electrolytic grade tinned copper suitable sizes 4 bar bus bar same in size for Phase RYB, & neutral bars mounted on non-hygroscopic porcelain insulator / hylam sheet having sufficient di-electric strength duly insulated with PVC heat Sinkable sleeve & wrapped with colour PVC tapes (Red, yellow, blue & black) for phases & neutral identification as per direction of E.I.C Timer set arrangement 1 sets Supplying and fixing of suitable sizes enclosure for housing the following accessories and the total timer set fixed inside the feeder piller as per direction a) Digital timer ( Make Legrand/ L&T ) - 1 no b) Four pole isolater 63A ( Make Legrand/ L&T ) - 1 no c) FP 63 A rated power contractor with 1 NO + 1 NC Aux . contact block ( Make Legrand/ L&T ) - 1 no d) FP 63A MCB ( Make Legrand/ L&T ) - 1 no e) Auto / Manual / by pass switch ( Make Legrand/ L&T ) - 1 no f) On /off indicator -2 nos g)The complte arrangement must be wiring by PVC insulated FRLS CU wire 4 sq mm with suitable socket connection as per direction of E.I.C Earthing. A separate Al. Bar of suitable sizes for earth.with sufficient drill hole are placed and earth bolts will be provided in panel board in both sides as per drawing. Installation the above above as per requirement with brick pedistal / foundation etc to comp the installation. considering loading , unloading in shafe place etc to complete the job as per site condition by his own arrangement / materials and after all no additional cost or no extra cost will be paid by the department as per direction of EIC
D) LIGHTING ARESSTER Supply & Fixing Lightning conductor Air-terminals made of 15 mm dia 1500 mm long GI pipe (ISI Medium) having five prongs of 4 SWG GI (Hot Dip) wire at top with 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. duly grouted on the parapet etc. in CC mortar (4:2:1) [J-1/1]
Cutting cornices/ steps etc. including cutting recess in buildings etc. & supply & fixing 15 mm bore (ISI-Medium) GI pipe protection as below and mending good damages to the building works: [J-1/4] Length upto 0.5 Mtr
Making soldered joints between conductors, conductors and air terminals for 4 SWG GI (Hot Dip) wire incl. supply of jointing materials and painting with 2 (two) coats of bituminous paint [J-1/5]
Making soldered joints between conductors and down pipes/ other metallic objects for 14 SWG GI (Hot Dip) wire including supply of necessary 4 SWG GI (Hot Dip) wire, jointing materials and painting with 2 (two) coats of bituminous paint [J-1/6]
Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run [J-1/7]
Supply & fixing GI (Hot Dip) strips 20 mm x 3 mm thick for horizontal run on the Parapet/Roof/ Wall with GI Saddles 1100 mm apart incl. mending good the damages to building works [J-1/9]
Supply & fixing of GI (Hot Dip) strips 20 mm x 3 mm thick for vertical run on wall with GI saddles spaced not exceeding 1000 mm apart incl. mending good damages to building work [J-1/11]
Excavation of soil for installation of Earth Electrode and filling & ramming as to GS. For morrum soil [G-1/1(b)]
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long),13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level & restoring surface duly rammed (For Morrum Soil ISI-Medium GI pipe as toGS. [G-1/2(b)]
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required as to GS.
Connecting the equipments to earth busbar including S & F No. 10 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages as to GS.
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe as to GS.
i) Supply and fixing of angle iron frame fabricated from 40 mm x 40 mm square four nos hollow bar with cross and radial support including one no 40x40 mm angle iron support in the middle for the Sign board of following size with suitable three nos. crosss angle support welded with 4 nos angle hook in equal space for fixing on the structure with all necessary welding and fabrication. The structure shall rest in both sides with proper welding as per instruction of EIC. ii) S&F LED Sign Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6-7 inch depth (Both size ACP sheet) iii) S&F Special type of imported acrylic English letter appx 50 mm thickness flushed on the ACP board made on imported acrylic ACAST sheet. The following letter font shall be in horizontal line as mentioned. iv) S&F SMD LED inside the board and to run for each letter including wiring , soldering etc and fixing the SMPS properly with the specification of the SMD --- 1. LED colour : White/ Red/ Blue (make-samsung /Nichia /Cree/Hisine ) 2.Stright : 2 or 3 nos LED per module 3. Luminous Flux : 140 LUMEN 4. Life : 70000 burning hours 5. Visibility: 100 meter atleast normal eye 6. Power Supply: 1.2 watt to1.6 watt per module 7.Input : 230A.C , Output : 12V DC 8.Shape of LED : recrangle or square 9. Grade : IP - 65 v) S & F LED Power supply 300/ 400W IP65 50/60Hz frequency, 108 to 305 VAC driver power supply other electrical accessories the panel prepared along with its necessary arrangement ( make Hisine/Migion/Cehosa/PWD appvd ) vi) Cost of painting of MS structure with 2 coats of RO primer and one coat of synthetic enamel paint after scrapping with emery paper properly make ICI/Asian paints vii) Cost of erection of scaffolding for fixing the Signage viii) Testing and commissioning of the LED board as per following nomenclature ix) cost of carrying the LED sign board from work shop to site Location: Main Gate(200 sqft),Boys Hostel(20 sqft),Girls Hostel(20 sqft),Primary School(60 sqft),Higher Secondary School(60 sqft)
M/S BHABANI CONSTRUCTION
Allied Concern
PRADIP KUMAR DHABAL
RS SYSTEMS AND PROJECTS
R K ENTERPRISE
technical_1136600.pdf
PDF • 0.56 MB
techsummary_1136600.pdf
PDF • 0.64 MB
finance_1136600.pdf
PDF • 0.74 MB
BOQ Comparative Chart
xlsx • 0.02 MB
finsummary_1136600.pdf
PDF • 0.75 MB
04Q_2nd_call.pdf
PDF • 0.27 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .