MID/AN/05

Fabrication, installation, testing and commissioning of 3-ton capacity manually operated 3 nos. gates to be installed on distributary of D-tank of LIS Manda 1. The job involves Providing, fabrication and fitting of new gates of size (1.5ft X 1ft 8inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate. P/F of guide frame (5ft X 1ft 9inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC 100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job covers the cost of hire charges of tools, tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro carriage charges etc. Complete job.

Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate D/O D5 main to be installed on NPC. The job involves Providing , fabrication and fitting of new gate of size (3ftX5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (6ftX5ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro carriage charges etc. Complete job.

Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate D5 minor to be installed on NPC. The job involves Providing , fabrication and fitting of new gate of size (2.5ftX4.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (6ftX4ft 7inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro carriage charges etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate D/O 30900 installed on NPC. The job involves dismantling of old gate structure & Providing , fabrication and fitting of new gate of size (4.5ftX2ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (8ftX2ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate DO 40000, DO 39000, D/O 35000 installed on NPC. The job involves dismantling of old gate structure & Providing , fabrication and fitting of new gates of size (5.5ftX2ft 7inch) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (10 ftX2ft 8inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125 . Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate DO 44000 installed on NPC adjoining border area . The job involves dismantling of old gate structure & Providing, fabrication and fitting of new gate of size (4ft X1.5ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (8ftX1ft 7inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100 . Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, labour charges, cutter, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate D3 installed on NPC. The job involves dismantling of old gate structure & Providing, fabrication and fitting of new gate of size (4ftX5ft) made of M.S channel ISMC100 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (12ftX5ft 1inch) made out of M.S channel ISMC125. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC125. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3-ton capacity manually operated gate DO 46000 installed on NPC adjoining border area. The job involves dismantling of old gate structure & Providing, fabrication and fitting of new gate of size (6ft X 2ft 7inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (3mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate. P/F of guide frame (12 ftX2ft 9inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate D6A installed on NPC adjoining border area . The job involves dismantling of old gate structure & Providing , fabrication and fitting of new gate of size (2.5ftX4ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (6ftX4ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate DO 73000 installed on NPC adjoining border area. The job involves dismantling of old gate structure & Providing , fabrication and fitting of new gate of size (5.5ftX4ft) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (11ftX4ft 1inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro, carriage charges, rebate on old parts etc. Complete job.

Replacement/Fabrication, installation, testing and commissioning of 3 ton capacity manually operated gate D10 installed on NPC adjoining border area . The job involves dismantling of old gate structure & Providing , fabrication and fitting of new gate of size (3.5ftX3ft 2inch) made of M.S channel ISMC75 and 6mm M.S. Sheet, stem rod of size (2mtr) with winch & worm assembly (3ton capacity) complete with cover, rain pipe and base plate . P/F of guide frame (6ftX3ft 3inch) made out of M.S channel ISMC100. Job also includes P/F of hoisting for resting of winch machine made out of M.S channel ISMC100. Shifting of the material to site, followed by lowering of the stem rod, fastening and aligning it with the gate for smooth uni-axial vertical up and down travel and testing the complete system. The job also includes civil work for fitting the guide frame in concrete/brick wall with the help of hammer, chisel and other tools & tackles required at site. The job includes cleaning of the newly provided winch assembly and gate structure with emery paper followed by application of one coat of red oxide primer and two coats of paint and also greasing work. The job also involves fitting of P shape side rubber seals and flat type bottom rubber seal on gate with flat type guide plate on sides of guide frame as per the size of gate. The job covers the cost of hire charges of tools ,tackles, civil work charges , welding rod, gas & oxygen cylinder, cutter, labour charges, fabrication charges, cost of material, to and fro carriage charges, rebate on old parts etc. Complete job.

M/S K S ENGG WORKS (BID ID -2384843)

Guru Nanak Engineering Corporation (BID ID -2386395)