REPAIRS AND RESURFACING TO CERTAIN ROADS INCLUDING RENEWAL OF ROADFURNITURE AT SOUTHERN PART OF RUNWAY, VIMAN NAGAR, CHANDAN NAGARAND 9BRD UNDER AGE BR-II OF GE (AF) LOHEGAON AT AIRFORCE STATION PUNE

Amount

M & L for Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area n exc 400 sqm each and depth exc 50mm but n.exc 100mm complete all as specied and as diected.

M&L 7.5cm thick (compacted thickness) WBM, with coarse aggregates (Granite or basalt stone) of grading 2 (63 to 40mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and directed.

M & L for Applying evenly a priming/tack coat with bituminous primer ( paving bitumen of grade VG 10) at 10 kg / 10 sqm

M & L for Preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc .

M & L for Applying evenly a priming/tack coat with bituminous primer ( paving bitumin of grade VG 10) at 5 kg / 10 sqm for laying SDAC & BM complete.

M&L bituminous premix semi dense asphaltic concrete by using paving bitumen VG 30, ( 30 mm consolidated thickness) with 5.5 % binder content rolled by 8 to 12 tonne vibrtating ( tandom) road roller to confirm uniform surface and compacted to required gradient complete with mechanical paver all as directed by Engr - in Charge.

M & L for Premixed Bituminous Macadam with 4% binder by using paving bitumen VG 30 content by weight of total mix laid, rolled and compacted to required gradient and camber ( consolidated thickness 75 mm or less) complete all as directed by Engr - in Charge.

M & L for Repairs to Pot holes any depth, not execeeding 1 Sqm each incl sweeping free from dust, mud or water scoring sunken surfaces in roads etc cutting around edges to at least 25 mm in depth making good by applying tack coat @ 5 kg per 10 sq m,with using paving bitumenVG-10 putting in premixed bituminous macadam, well rammed and sealed with binder(Paving bitumen VG-30) 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm, complete all as directed by Engr - in Charge.

M&L Thermoplastic road marking paint 2.5 mm thick centre lines, stop lines, dashes, arrows letters of approved width and colour etc on pavements and road surface as per IRC pattern with thermoplastic paint of approved quality with road safety spikeries glass beads 30% including preparation of new or previously treated road surface by using special applicator machine with heating arrangement upto 160 degree centigrade complete all as specified.

S & F for two way reflective road cat eyes of metal alloy body of approved dimension , reflective panels of red or any other colour as approved, fixed with suitable size studs as per manufacturer's specification complete all as specified all as per directed and specified complete all as specified and directed by Engr-in-Charge

Supplying and fixing solar stud metallic alloy electronically operated automatically turns on at night and turn off at dawn, high efficiency mono crystalline solar panel 2.2/3 watt, one ni-cd rechargeable battery (1.2v/1400MA) with six supper bright LEDs with 10000 to 18000 mcd capable to withstand weight of 10 tons with unbreakable poly carbonate clear facing designed for maintenance free operations complete all as specified and fixed in repair all as specified and directed

Supply and fixing in repairs ISI Mark High reflective convex mirror made of finest quality of ABS Material and polycarbonate sheet with UV stablized with Orange/Red color in round shape of 1000 mm dia and 130 degree of viewing angle installed with incl neccessary clamp and nut bolts to SS pipe grouted into PCC 1:3:6 in the post holes complete all as specified. as specified & directed by Engr-in-Charge .

S& F in repairs Delineator dual directional , fitted with 2 or 3 numbers high reflective reflectors and incl mounted on pipe power coated anti rust of approved make, height and size in PCC 1:2:4 with size of block 300mm X 300mm X 350mm deep incl earth work, complete all as specified. incl excavation and making good to GL complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as directed by Eng-in-Charge.

M & L for Excavating in post hole or similar hole each n.exc. 0.50 cum, getting out soft loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around in layers n.exc. 25 cm, watering and removing surplas soil to adistance not exc. 50 mtr and making good surface in soft soil complete all as specified and as directed by Engg-in-Charge.

M&L PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in foundations, filling & mass concrete complete all as specified and directed.

M & L for Manufacturing, supplying and fixing retro reflective informatory road signage and boards, made up of 2 mm thick aluminium sheet with supporting frame, face to be fully covered with high intensity and encapsulated lens type heat activated retroreflective sheeting conforming to type - III of ASTMD-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silverwhite with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners,lowering down the structural frame work fixing and erecting the same in position all complete as per drawings, specification and direction of the engineer-in-charge.(Supply only steel post work including M.S. plate, posts to be provided & measured separately). Rectangular area of the sheet only shall be measured for payment.

Supply only Stainless steel tubes of any size complete all as specified and directed.

M&L for Plates (plain or chequered) Fe410 gde E250 channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment fixed and welded complete all as specified and directed.

M&L two coats of synthetic enamel paint over one coat of red oxide primer on new steel surface after necessary preparaton of surface over 10 cm in width or girth complete.

S&F in repairs ABS plastic speed breaker of size 450mm x 75mm x 335mm heavy duty of approved make fixed to roads with all fittings complete all as specified and directed.

M & l for Screening road metal, Chippings, etc. on the site of the work, when specially ordered, including removing screened materials clear of screen and stacking in separate heaps for measuring (Materials from both sides of screen measured) .

M & L 150mm thick (compacted thickness) WBM 75mm thick each layer in two layers with broken or crushed granite/trap or basalt grading 2 (63 to 40mm size), , spread, watered and rolled with 8 to 12 tonne power roller, hollows made up to form true surface and consolidated to required gradient and camber, etc, complete, all as specified. Note:-(Each layer shall be rolled and compacted separately).

M & L except materials 150mm thick (compacted thickness) WBM 75mm thick each layer in two layers with broken or crushed granite/trap or basalt grading 2 (63 to 40mm size),, spread, watered and rolled with 8 to 12 tonne power roller, hollows made up to form true surface and consolidated to required gradient and camber, etc, complete, all as specified. Note:-(Each layer shall be rolled and compacted separately).

M & Lfor applying evenly a tack coat with bitumenous primer VG10 @ 10 kg per 10 Sqm on WBM complete all as specified

S&F Stone kerb of roughly squared stones of size 20cm x 30cm, all surfaces hammer dressed so that the maximum depression from a straight edge held against the dressed surface shall not exceed 20mm jointed in cement mortar 1:6 and struck flush

MOHANLAL MATHRANI CONS. PVT. LTD. (BID ID -3158768)

PAVEWAY CONSTRUCTIONS PRIVATE LIMITED (BID ID -3158813)

Aadarsh Bharat Enviro Pvt Ltd (BID ID -3156811)