COMPREHENSIVE MAINTENANCE OF B/R ITEMS AND E/M ITEMS TO CERTAIN OMQ/SMQ QTRS AT AFS HAKIMPET UNDER GE (AF) HAKIMPET

Amount

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as directed by Engineer-In-Charge

M&L 25 mm thick PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in floors all as specified and directed.

M&L Cement concrete (1:4:8) Type D2 40mm Graded stone aggregate filling and mass concrete in sunkun floor complete all as specified and directed.

M&L Double charged Vitrified Ceramic tiles of light shade 10 mm thick (square/ rect) polished, area of each tiles exc 0.36 sqm and n exc 0.42 Sqm, in floors etc. with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match all as directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rect) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles all as directed.

M&L Non skid ceramic tiles of 7 to 8 mm thick (square/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,of approved 1st quality in floors etc with screed bed or bedding layer 15mm thick in CM 1:4 in floor finishes set and jointed in neat cement slurry and pointed with white / coloured cement to match tiles all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises.

M&L for rendering to Stone masonry surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:3, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed.

M&L Glazed Ceramic tiles coloured, of size 600mmX350mm/300mmX(7-9)mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as directed. Note: Mitred tiling to be done at external corners with a cut of 45 degree angle along the edge and the cost is included in rate quoted above.

M&L Glazed Ceramic tiles coloured, of size 450mmX300mm/300mmX7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles all as specified and directed. Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar all as specified and directed.

M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in stop, cooking plateform, and other similar situation complete all as specified and directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

S&F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed.

S&F 35mm of 2nd class HW rail and style Plain framed, panelled factory made shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated all as specified and directed by Engr-in-charge.

S&F 30mm thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed.

S&F 120 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified directed by the Engineer-in-Charge

S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S&F 200mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as directed.

S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as directed by Engr-in-charge.

Supply and fix Powder coated Aluminium window shutters, sliding type two track for fixing glass sections of aluminium section weighing 0.55 kg/Rm including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : Glass will be measured and paid separately under relevant item.complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.40 mm fixed with stainless steel wire staples as directed by the Engineer-in-Charge.

S&F 5.5 mm thick tinted glass of superior quality fixed to al partition and door each pan.

S&F Anodised aluminium grill (deco grill) any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified.

Supply and fix in repairs 25 mm dia Stainless steel curtain rods with fixing brackets, stops, rollers etc, taking down old pipe complete all directed by the Engineer-in-Charge.

supply and fix 20mm thick flush shutters, solid core construction, with block board core and plywood face panels for cabinet and cupbord, commercial type on both sides complete, as specified and directed

M&L 1mm to 1.5mm thick sunmyca sheet glossy finish any colour paste with favicol on plywood for cabinet and cupbord, commercial type on one sides complete, as specified and directed

M&L Soft closer drawer channel of any length as per requirement as directed. Make : Godrej

M&L Stainless steel Basket any type / any size fixing as directed by Engr-in-charge.

S&F Stainless steel Handle 100mm dia as directed.

S&F Clip on soft hinges full overlay as directed. Make : Godrej

S&F external teak wood lipping, 6 mm thick n .exc 20 mm width with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard complete all as specified and as directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 m all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished even and smooth with out using extra cement all as specified and directed.

M&L Complete removal of existing treatment on walls complete all as directed.

M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as directed.

M&L Raking out and Raised Pointing of CM 1:4 joints/ pointing to random rubble or polygonal rubble uncoursed or brought up to courses built in Cement or cement lime mortar as in directed.

M&L Finishing walls on Stone masonry with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L 3 coats of white wash on newly plastered surfaces on ceilings complete all as specified and as directed.

Dismantling of existing PVC 500-1000 ltrs water tank complete all as directed.

S&F 1000 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks all as specified and directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe all as specified and directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store all as specified and directed.

All same as per item here in before but 20 mm bore.

All same as per item here in before but 25 mm bore.

S&F 16mm bore CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings,floors etc. in repairs inc concealed piping after cutting in brick work/stone masonry walls where ever required complete all as specified and directed.

All as per item above but 20mm bore.

Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth

S&F sinks without drainage board made of 304 grade stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe of overall size of 610mmX510mm bowl size 560mmX460mmX203mm including waste couplings, waste pipe and all other necessary fittings all as specified and directed.

Taking down old plate rack and refixing new stainless steel plate rack of minimum size 970x770x230mm of standard quality,fixed to wall with wooden gutties and screws complete all as specified and directed.

S&F Counter top wash hand basin whiteflat back, size 510mmX410mmX150mm including couplings, waste pipe, connections and all necessary fittings complete all as specified and as directed. Make: Prayag Catpart No-4715 or quivalent in other make.

S&F Vitreous China wash hand basin whiteflat back, size 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed.

S&F 15mm bore pillar taps of Swan neck type CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed. Make: Prayag Catpart No-6314N or quivalent in other make.

S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat and cover for pedestal pan with all as specified and directed.

S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and directed.

S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent

S&F brass CP wall mixer 15 mm bore for mixing hot and cold water screwed down for iron pipe and fixed as directed. Make: Prayag Catpart No-6675 or quivalent in other make.

S&F brass CP shower rose with arms 75 mm size fixed all as specified and directed.

S&F15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs all as specified and directed. Make: Prayag/Parryware or equivalent.

S&F 15 mm CP Angle valves, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair. Make: Prayag/Parryware or equivalent.

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

S&F Chromium plated (CP) Toilet paper holder of vitreous china fixed to walls brass screws complete all as specified and directed

S&F Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed

S&F Towel ring for WHB consisting chromium plated complete all as specified and directed

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in all as specified and directed.

S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed

S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

S&F PVC (SWR) 110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, double (double Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed.

Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling as specified and directed by Engineer In charge.

Removing excavated material exc. 1.5 m but n.exc 5km and depositing where directed

M&L for Preparing Old steel and iron surfaces of any description over 10 cm width or girth and applying a coat of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparing New wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparing Old wood and wood based surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

S&F CP Bibtap 15mm bore for Kitchen sink regular spout with flange of Make: Prayag, Catpart No 6616 or equivalent in other make complete all as specified and as directed by the Engineer-in-Charge.

S&F 32mm CP Bottle traps for washbasin outlet Make: Prayag or equivalent in other make complete all as specified and as directed by the Engineer-in-Charge.

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed.

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC conduit / casing and capping of adequate size fixed on surface/ concealed with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes/junction boxes of any shape and size modular white colour cover plate with frame.

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for earth plug socket

All as per item here-in-before but with 2.5 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular bell switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 2 module complete all as specified and directed by Accepting officer

S & F buzzer, ding dong AC 230 Volt single pole complete as specified.

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S & F in replacement elegantly industrial general purpose box type luminaire, 1x20 Watt, designed box type LED luminaries, CRCA sheet steel housing with white reflector cover fitted to the body with decorative end covers complete with driver, spring loaded rotor type lamp holders, connected block with and including 01 No LED lamp 20 Watt and all accessories, pre-wired and connecting the same to ceiling rose with & including twin core PVC insulated and sheathed copper conductor 23/0.0076 cable including all accessories and fixing arrangement for fixing the light fitting to walls / roof surface over and including 2 Nos PVC square box complete all as specified and directed.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

S&F lamp holder PVC / Polycarbonate type with cord grip cap suitable with inverter LED lamp fitting 12 Watt complete all as specified and directed by Engr-in-charge

Taking down distribution boards with MCBs/ main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down metal clad plug with MCBs of any type, size and capacity complete all as specified and directed by Engr-in-charge

S & F sheet metal enclosure powder painted for MCB DB SPN 16 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by Engr-in-charge.

S & F sheet metal enclosure powder painted for MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar suitable for MCCB 63-125 Amps as incomer complete all as specified and directed by Engr-in-charge.

Supply and fixing MCCB 25-100 Amp Three pole 415 Volt , breaking capacity, 16 KA, with fixed thermal & magnetic setting complete all as specified and as directed by the Engineer in charge.

Supply and fixing MCB TPN four pole, 415 V, 63 Amps having current rating 16 KA complete all as specified and directed.

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fix sheet metal powder painted double pole enclosure with a two pin and earth plug and socket flushing in wall including 20 Amps rated double pole MCB 10 KA, "C" curve complete all as specified and directed by Engineer-in-Charge.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fix Exhaust fan, steel body, steel body AC Single phase 230 V of size 300 mm sweep with blades, and frame and louvers complete all as specified and directed by Engr-in-charge

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-charge

Supply and fix electric water heater, storage type ABS body with SS inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in-charge.

Taking Down water heater (Electric Geyser) storage type of any make of 25 / 50 ltr capacity after disconnecting the existing electrical connection, water pipes and deposite to E/M store yard and refixing in the original place/position duly connecting up water supply and electric supply etc. including hot and cold water PVC connections 15 mm dia 450 mm long with PTMT nuts on both sides for connections complete after repair of building all as specified and as directed by the Engineer-in-Charge.

Disconnecting and removing EXHAUST FAN of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of exhust fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified.

Disconnecting and removing ceiling fan of any sweep any height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine replacement of split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling, including replacement of wornout/defective parts, refixing in original position including minor repairs for the smooth functioning and provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified.

Taking down light fittings of any type or capacity, depositing to store and refixing tube light fittings of any type or capacity after testing including all fixing accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by Engineer-in-Charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

M&L in replacement of GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.50 Metre long bent to shape as per specified for fixing Security Light Fitting including suitable size of clamps and applying Two coats of Aluminium Paint over a coat of Aluminium Primer including taking down old unserviceable GI Pipe Bracket with clamps, complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed by Engr-in-charge.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed by Enigineer- in - Charge.

S & F in replacement of pressure release valve suitable for 25/50 litre capacity geyser including taking out the existing unserviceable one all as specified and directed by Engineer-in-Charge. Make -Sphare hot /bajaj/ditz/Picco/usha .

S & F in replacement of non return valve gunmetal for 15 mm bore with suitable fittings.Make - Kirloskar / Leader /Kartar .

S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for cold water connection.

S & F in replacement of PVC connection 15 mm dia 450 mm long with PTMT nuts on both sides for hot water connection.

S & F in replacement of PVC insulated and PVS sheathed flexible Copper Cable 3 core x 4.0 Sq mm from socket to Geysers/ Pressure Pumps.

S & F in replacement of plug top 3 pin 16 Amps 240 volts. Make : Anchor/Leader/Havells.

Supply and fixing of 12" gold life smart down rod (Anti suicide fan rod) MS pipe zinc plated, 19mm OD, 1.8+/- 0.05mm thick, spring set grade 3 carbon steel material zinc plated, MSME tested for performance test and opening at impact load of 22 kgf + and spring hidden in pipe will expand to about 1 mtr or more, white colour for ceiling fans of any size with all accessories including removing the old rod and depositing to E/M store yard for further disposal complete all as specified and directed by Engineer-in-Charge.

Disconnecting water boosting pump of any size and from any height including electrical connections, bringing down, dismantling, opening up, cleaning internally and externally, overhauling by replacing unserviceable items such as water pressure boosting tank, NRV, 5 way connector, pressure guage, Danfoss Switch, copper flexible cord, cotter pins and check nuts etc, lubrication with approved lubricants, reassembling including replacement of worn-out /defective parts and refixing for smooth functioning and connecting cable if required including testing complete all as specified and directed by the Engineer-in-charge. Notes:- Replacement of unserviceable spare part required for servicing/overhauling and rewinding of water boosting pump motor shall be measured and paid separately under relevent items after testing and commissioning vide relevent Item of this schedule.

Taking out burnt copper winding wire from motor of water boosting pump, cleaning the rotor shaft properly and rewinding with new super enamelled copper winding wire as per existing size/ gauge including heating/ varnishing/ testing etc complete as per manufacturer's design.

Supply only the following parts in replacement of water pressure booster pump of existing makes and size complete all as specified and as directed by the Engineer-in Chargre :-

(a) Water Pressure Boosting Tank of Capacity 24 Ltr.

(b) Non returning Valve of existin size.

(c) 5 way connector

(d) Pressure Guage

(e) Danfoss switch R: 0.2to 7.5 Bar, D: 0.7 to 4 Bar

(f) Electric driven motor of 0.5 HP suitable for existing pump

(g) water pressure boosting pump of existing size and capacity

Supply and fixing of MS Meter Box made out of 2 mm thick CRCA sheet CPRI approved factory made, totaly enclosed of size not less than Box size - 1.5m x1.2m x0.45m duly painted with two coats of powder coated paint over one coat of red oxide primer effectively PVC gaket & sealed for vermi proof and dust proof and mounted on wall, compartemtalised for 05 Nos of Meters, 01 Nos of incomming MCCB, 4 Nos of out going MCB TPN, 01 No of MCB DP, including arrangemet of transperent Glass for meter reading, provision for tapping incoming & outgoing electric connections with suitable size of lugs, glands, and copper wire all as specified and as directed bt Engineer- in- Charge.

saradhi construction combines (BID ID -3073966)

M/s D.Krishna Varma (BID ID -3068230)

VACON INFRASTRUCTURES (BID ID -3079071)

Sri Surya Enterprises (BID ID -3087597)