PERIODICAL SERVICES INCLUDING PETTY REPAIRS TO OTM ACCN FAFA ACCN AND REPAIR TO COMPOUND WALL GATES AND GATE PILLARS PATH FENCING AND OTHER MISC WKS UNDER GE SATWARI

Amount

Note :- (1). Work will be carried out upto 4th storey of bldgs also as per direction of Engr-in-charge including necessary formwok and scaffolding required as per site conditions & no extra payment shall be made on this account. (2). The rates quoted by the contractor are inclusive of grubbing of plants growing off the walls, fins, shafts, chajjas etc of the buildings and making good the surface before prearation for periodicals which shall be handed over to the user for execution of work services. (3). The contractor shall get approved by engineer in charge srapping and preparation of surfaces (both internal and external) of the buildings as a stage before carring out periodical services.

M & L for preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

M & L for preparation of old decorated brick /concrete, plastered /un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss, efflorescent salts, oil, greasy spots & rubbing with sand paper and and applying one coat of white wash on ceiling, complete all as specified and directed.

M & L for preparation of old decorated concrete/ plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with dustfree sand paper mechanised scrapper as per paint manufacturer specifications and applying one coat of premium distemper on old decorated wall surface using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructions, necessary filling of wall care putty on uneven surface as and where required all as directed by engineer in charge.

M & L for preparation of old decorated plastered /concrete surfaces of walls, including rubbing with dustfree sand paper mechanised scrapper and applying two coats of premium oil emulsion distemper using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructions and filling of all the hoes/depressions with wall putty complete all as specified.

M & L for preparation of old decorated plastered /concrete surfaces of walls, including complete removal of existing treatment & rubbing with dustfree sand paper mechanised scrapper and applying two coats of premium oil emulsion distemper using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructions over coat of wall care putty of 1 to 2 mm thick and one coat of primer complete all as specified.

M & L Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying one coat of cement base paint on walls, pillars, cornices etc(up to 4th storey with necessary scaffolding) complete all as specified and directed.

M & L Preparation of old decorated brick /concrete/ plastered /un-plastered surfaces of walls, pillars, cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts, trading oil and greasy spots,rubbing with sand paper and applying two coat of cement base paint on walls, pillars, cornices etc(up to 4th storey with necessary scaffolding) complete all as specified and directed.

M & L Complete removal of existing treatment including washing, rubbing down with dustfree sand paper mechanised scrapper and scrapping of painted surfaces including preparation of old plastered surfaces of walls, chajjas, fascia, face of columns, beams etc. and applying one coat of weather proof exterior emulsion using high efficiency hydraulic pump with minimum 270 cc motor and oil alert and silver plus airless gun spray as per manufacturer instructions, making good uneven surface/holes with putty coloured in same shade where ever required etc (up to 4th storey with necessary scaffolding) complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm complete all as specified including preparation, grinding of uneven surface wood and necessary filling by putty as and where requered to make surface even and smooth.

M&L for applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper or grinding by hand grinder to make surface even and smooth and applying primer where requred (up to 4th storey with necessary scaffolding) complete all as specified

Taking down cement plaster on brick or stone walls including racking out joints, hacking for key, scrubbing down with water, etc (up to 4th storey with necessary scaffolding) complete all as specified and directed.

Dismantling floor, hearth or wall tiling, terrazo , including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface over and including 10mm thick C:M 1:4 backing coat all as specified. Make : Somany,Kajaria,( sample as approved & kept in GE's sample room)

M&L Rendering cement plaster 15 mm thick on fair faces of concrete/brick surfaces of wall (In Patches ) in cement mortar 1:4 finished even and smooth w/o using extra cement (up to 4th storey with necessary scaffolding) complete all as specified and directed.

M&L Rendering cement plaster 15 mm thick on fair faces of brick/concrete surfaces of wall (In Patches) in cement mortar 1:6 finished even and smooth w/o using extra cement complete all as specified.

M&L Rendering cement plaster 10 mm thick on fair faces of ceiling (In Patches ) surfaces in cement mortar 1:3 finished even and smooth w/o using extra cement complete all as specified and directed.

M & L for preparation to achieve smooth and even surface of new plastered/concret surface and applying two coat of white wash on ceiling complete all as specified and directed.

M&L for preparation to achieve smooth and even surface of new plastered/ concrete surface and applying two coat of oil bound distemper over a coat 1 mm thick putty complete all as specified.

M & L Preparation of newly plastered wall surfaces and applying of two coats of cement wash complete all as per specified and directed.

Writing letters or figures (Block, Roman. Italic or Indian) n.exc 30cm high including obliterating old writing of any description n.exc 0.2 Sqm with paint to match existing work complete all as specified Such as NP-02,P-101,T-104

M&L for chipping of spalled and loose concrete of soffits of slabs,chajjas, stair case, facias, parapets, columns, beams and like as directed, roughening and cleaning concrete surafce with steel wire brushes, removing of rust from existing steel surface with rust remover of SIKKA rustoff 100 applied in two coats @ 0.15 Kg/Sqm per coat of steel surafce and cleaning all rust with wire brushes cleaning with water and allowed to dry including S&F welded fabric GI wire mesh or wire size not less than 75mmx75mm and 3.0mm dia as reinforcement to concrete after placing the additional reinforcement all concrete surface shall thoroughly scrubbed with brushes, washed with water and allowed to dry this surface apply chemical polycrete admixture at the rate not less than of 2% by weight of cement and providing minimum 30mm thick (average thickness) gunniting mix (using 1 part of Ordinary Portland Cement and 2 parts of sand mixed with adhesive/admixture at the rate as directed) with a pressure 2.00 to 2.5 kg/sqcm by guniting machine and making the surface even including 5mm thick plastering in CM 1:3 on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement including necessary form work and scaffoding upto 4th storey to be carried out complete all as specified and directed. Note.- Where ever reinforcement required will be measured and paid seperatly

Mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

Hacking out old broken glass (any thickness,size quality or description) from any types of wooden/steel/alum (up to 4th storey) frames or stone concrete or brick surrounds glazed with putty or fixed with beads.

S&F 3 mm thick sheet glass ordinary quality glazing with steel pins, with Silicone Sealant to steel windows and, beads nails etc to wooden surfaces as in area n.exc 0.50 sqm in each pane, all as specified.

S&F 4 mm thick sheet glass ordinary quality glazing with steel pins, with Silicone Sealant to steel windows and, beads nails etc to wooden surfaces as in area exc 0.50 sqm in each pane, all as specified.

S & F 3 mm thich figured glass, pin head type and glazing with Silicone Sealant , area nexc 0.5 sq. m in each pane

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr as specified.

Demolition cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) incl removing from site to a distance n exc 500 m all as specified.

Demolition of Reinfored cement concrete of any description and in any position and removing the rubbish from the work site out side defence permises. (reinforcement cut as required to facilitate demolition

Cleaning of the existing drain, by taking out vegetation etc. including excavating of loose earth accumulated and removal of the debris from the site of work to a distance not exceeding 50metres complete all as specified and as directed.

Excavating in trenches, n exc1.5 m wide and n exc 1.5 m in depth; for foundation, etc. orfor shafts, wells, cesspits, manholes, pier holes, etc. nexc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/Hard soil complete, all as specified.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete, all as specified.

M & L Hard core of gauge n.exc. 63 mm, deosited spread and levelled in layers n.exc. 15 cm thick using broken stone or boulders, watered and rammed to a true surfaces.

Except material of hard core of gauge n.exc. 63 mm, deosited spread and levelled in layers n.exc. 15 cm thick using broken stone or boulders, watered and rammed to a true surfaces.

Removal of excavated material ( soil) n.exc 50 mtr and depositing where directed at level not exc 1.5 m from starting point..

M&L Cement concrete type D-2, 1:4:8 as in fdn and mass concrete work all as specified by Engr-in-charge.

M & L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm),including making drainage opening where required complete.

M&L PVC Type - 'B' grade drain pipes of 150mm internal dia, laid in trenches or below path on concrete bed and jointed as in repairs, complete all as specified ( excavation and earth work and concrete bed shall be measured and paid separately.

M&L PVC Type - 'B' grade drain pipes of 100mm internal dia, laid in trenches on concrete bed and jointed as in repairs, complete all as specified .

M & L Factory made precast concrete designer paver tiles any colour with glossy finish, shape and size not less then 300mm x 300mm x 20mm thickness, M-25 grade pointed with grey cement and pigment over and including 15mm thick CM 1:4 screed bed or bedding layer complete all as specified and directed. Make : Onyx ,Otec, Oster

M & L Factory made precast monolayer concrete tiles any colour with top 8 mm thick layer , polymer moulded, white cement and pigmented wearimg course layer and balance layer made in grey cement , with glossy finish at top, shape and size not less then 300mm x 300mm x 24 mm thickness, M-20 grade pointed with white cement and pigment over and including 15mm thick CM 1:4 screed bed or bedding layer complete all as specified and directed. Make : Onyx ,Otec, Oster .

Material and labour for precast factory made Interlocking desigener tiles top layer glazed made in grey cement and pigment, thickness not less than 20 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set in neat cement slurry in floors over and including 15 mm thick screed bed with CM 1:6 complete all as specified directed by Engr-in-Charge. Make : Onex , Otec, Oster as sample approved by GE

Material and labour for precast monolayer factory made Interlocking desigener tiles with top 8 mm thick layer , polymer moulded, white cement and pigmented wearimg course layer and balance layer made in grey cement , thickness not less than 20 mm in different colour and pattern (compressive strength not less than 250 Kg/SqCm) set in neat cement slurry in floors over and including 15 mm thick screed bed with CM 1:6 complete all as specified and directed by Engr-in-Charge. Make : Onex , Otec, Oster as sample approved by GE

M&L Machine pressed precast concrete interlocking paver (with grey cement and pigment) block any colour , shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade.

Material and labour for precast monolayer factory made Interlocking tiles with top 8 mm thick layer , polymer moulded, white cement and pigmented wearimg course layer and balance layer made in grey cement , thickness not less than 60 mm in any colour and pattern (compressive strength not less than 300 Kg/SqCm) in floors , Paths etc complete all as specified directed and approved by GE. Make : Onex , Otec , Oster , as sample approved by GE

M&L for Sand filling under floors, paving or in foundations including watering and consolidation.

M & L Plain cement concrete 1:3:6 type C-2, (using 40 mm graded stone aggregate) 75 mm thick as in floor,path,pavings, hardstanding and similar works,finished fair and even without using extra cement, laid including necessary form work complete all as specified.

M & Providing Reinforced cement concrete louvres and jallies 50 mm thick( measured solid) set in cement mortar 1:4 Type B0 1:2:4 (12.5 mm graded aggregate) including all mouldings ..

M&L Providing, cement concrete 1:2:4 Type-B-0( 12.50mm graded aggregate) in cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for cement concrete work as in pavement/hardstanding of thickness 100 mm thick PCC 1:2:4 type B-2 using 40mm graded stone aggregate finishing the surface concrete topping even and fair including use & waste of form work and and to divide the area in panels all as specified and directed.

M&L for finishing Surface of concrete floor by brooming finishing the surface concrete topping in green Condition

M & L forming Expention joints 100mm deep x 10mm wide filled with sealing with bituminous sand filler 1:3 complete all as specified and directed.

Tightening old barbed wire & Restraining resecuring including making good staples etc. complete all as specified & directed by Engr-in charge.

M & L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410- W(Gde- E-250) quality- B

Taking down existing steel door / gate of area exceeding 2.00 Sqm but not exceeding 5.00 Sqm each having two leafs and refixing in same opening including necessary repair work i.e frame, PBI sheet, guide channel, flat iron bracing, steel roller, hold fast etc. and making good the disturbed surfaces of wall to the entire satisfication of Engr-in-charge.

Taking down existing road side delinators and storing at safe place and refixing same place with PCC 1:2: 4, 300X300X300 and making good the disturbed surfaces to the entire satisfication of Engr-in-charge.

M & L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6m mean radius and built in cement mortar 1:4, complete, all as specified and as directed.

M & L brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4, complete, but except brick, i.e. using serviceable bricks obtained from demolition, complete all as specified and as directed.

M & L brick work in cement mortar 1: 4, using sub class ‘B’ bricks, straight or curved on plan any radius in half brick thick wall all as specified and directed by Engr. In charge

M & L for form work to the side of flat wall of surface channel/ drain rough finished complete all as specifed and as directed.

M & L rendering 15 mm thick CM 1:4 on fair faces of brick work or concrete surfaces or concrete surface finished even and fair without using extra cement all as specified and directed by Engr-in-charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint , complete all as specified.

M&L Cement concrete Type B-2 1:2:4 ( 20 mm graded aggrigate) in surface channels and drains all as specified.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Add or deduct for every 5 cm girth above

M&L of Preparation of new steel surfaces (with rubbing sand paper) of any description, over 10cm in width or girth, applying two coat of synthetic enamel paint over one coat of red oxide primer all as specified.

M&L of preparation of old steel surfaces (with rubbing sand paper) of any description, over 10cm in width or girth, applying one coat of synthetic enamel paint all as specified.

M&L of preparation of old steel surfaces (with rubbing sand paper) of any description, over 10cm in width or girth, applying two coat of synthetic enamel paint all as specified.

M & L for preparation of new concrete surfaces of kerb stones, any width or girth , applying two coat of Synthetic enamel paint in different tint , over and including one coat of primer , over 10cm girth or width, not otherwise described , complete all as specified and as directed

M&L Preast RCC slab type B1, 1:2:4 using 20 mm graded aggregate supported with wall, beam, column in floor, roof, landing etc.

M & L for 75mm thick, plain cement concrete 1:2:4, type B-2 (using 20mm graded crushed stone aggregate) as in plinth protection etc., finishing surface even and smooth without using extra cement including making joints with bitumastic filling in proportion of bitumen and sand 1:3 by weight complete as specified and directed. Note : The concrete shall be laid at a stretch not exceeding 3.0m in length and joint shall be made at every turning / corners, complete all as specified and directed.

M/s Rajesh Mehra

M/S shakti steel industries

MOHINDRA ENTERPRISES