07/EE/DIV/JT/2024-25

Amount

SH: Concrete Work Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : a) 1:1½:3 (1 Cement: 1½ coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).

SH: Reinforced Cement Concrete Work Centering and shuttering including strutting, propping etc. and removal of form for : a) Columns, Pillars, Piers, Abutments, Posts and Struts

SH: Wood and P.V.C. Work Providing and fixing bright finished brass handles with screws etc. complete: a) 125 mm

Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. a ) Triple strip vertical type

Providing and fixing anti termite/ water proof commercial block board of approved quality and make like Century,Duro,Green for cupboard,frames backing, sides, shelves,table top etc. with necessasry screws, nails, adhesive etc. all complete i/c fixing 6 mm thick hard wood lipping on all exposed edges of block board etc. all complete as per direction of Engineer-in-Charge. a ) 18 mm thick with commercial veneering on both faces

SH: ROOFING Providing & fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.I. plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS 10192 and IS 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. a ) 2mm thick flat.

SH: Finishing 12 mm cement plaster of mix : b) 1:6 (1 cement: 6 coarse sand)

Finishing walls with Acrylic Smooth exterior paint of required shade : a) Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface).

Applying priming coat : a ) With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : a ) Two or more coats on new work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a ) One or more coats on old work.

Finishing walls with Acrylic Smooth exterior paint of required shade : a ) Old work (One or more coat applied @ 0.90 ltr/10 sqm).

French spirit polishing : a ) One or more coats on old work.

Sub-Head : Repairs to Buildings Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. a ) With cement mortar 1:4 (1cement: 4 coarse sand).

Sub-Head : Dismantling and Demolishing Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.

Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

BHOPINDER SINGH RAINA