Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC VILLAGE RATGANHA CHAIL DISTT KAUSHAMBI U P PIN 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L1 | Accepted-AOC AOC Awarded | |
| 2 | L2₹33.0 L+₹1.1 L (3.40%)Rejected-Finance 22B HEMILTAN ROAD GEORGE TOWN PRAYAGRAJ UP 211001 | PRAYAGRAJ | UTTAR PRADESH | 211001 | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹33.3 L+₹1.4 L (4.30%)Rejected-Finance MOHAMMADPUR CHAIL KAUSHAMBI UTTAR PRADESH 212208 | PRAYAGRAJ | UTTAR PRADESH | 212208 | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹33.4 L+₹1.5 L (4.67%)Rejected-Finance | L4 | Rejected-Finance Other than lowest quoted tenderer | |
| 5 | L5₹33.8 L+₹1.9 L (5.86%)Rejected-Finance | L5 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
14 Sept 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST ALLAHABAD
GE WEST ALLAHABAD NEW CANTT ALLAHABAD
REPAIR TO DOOR/WINDOWS AND OTHER RELATED WORKS TO MD ACCN UNDER AGE BR-I AT NEW CANTT ALLAHABAD
2022_MES_547223_1
8587/E8
Open Tender
Civil Works
Item Rate
270 days
NEW CANTT ALLAHABAD
Please refer tender documents
7 documents required · 7 mandatory
₹500
GE WEST ALLAHABAD
₹1 L
Yes
14 Oct 2022
24 Aug 2022
16 Sept 2022
24 Aug 2022
14 Sept 2022
7 Sept 2022
Amount
Taking down chowkhats or frames with shutters (without talking off shutters from the freme) area exc 1.50 and n.exc 4 Sqm each and removing from site complete all as specified and directed.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description exc 1 sqm but not exc 2 sqm each and removing from site complete all as specified and directed.
Taking down shutters of any description not exc 1 sqm each and removing from site complete all as specified and directed.
Dismantling boarding ,any description ,fixed with screws/nails all as directed
S&F 32 mm thick,Flush shutters solid core construction, with block board core and ply wood face panels, commercial type on both sides complete all as specified and directed.
S&F Second class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc complete stiles &rails as specified in SSR Part I, Section 8, clause 8:20(b) .complete all as specified and directed.
S&F Second class hardwood glazed and skeleton door shutter 35mm thick , open rebated and prepared to receive glass,gauze, etc. divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any number for securing glass,etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail;Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded prelam PVC Sheet on the front face & 2mm prelam PVC sheet on back face with particle board core complete all as specified and directed.
Providing & fixing factory made UPVC Sliding window three track made of extruded profiles with wall thickness of 2.30 mm(+-0.20 mm) .Window profile with hollow section with multi chamber.Frame(88mmx52 mm),sliding sash(42 mmx67mm).sliding mesh Sash(42mmx57mm) sliding interlock (One vertical length in each shutters)(45.5 mm x 28 mm),glazing bead (24.5 mm x 16 mm) will be mitred cut and fusion welded at all corners,including drilling of holes for fixing hardware and drainage of water etc,making arrangement for fixing of hardwarwe.EDPM gasket ,1.2 +-0.2mm thick galvanised steel frame (30mmx18mm) 2 nos,sliding sash(30 mm x18mm),sliding mesh sash(26 mm x10mm) profile to be inserted in required profile,frame will be fixed to be inserted in required profile,frame will be fixed to the wall with 8mm x 100mm long fasteners,Hardware (Touch lock of Zinc alloyed(white powder coated),steel roller system.Stainless steel wire cloth 0.36 mm nominal dia of wire & average width of aperture 1.40 mm and required accessories.(Note :The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories.Net opening will be measured for payment purpose.)
M&L powder coating anodised aluminium frame for doors,windows,ventilators with one or more rebates including joining cleat for fixing etc complete all as specified.
M&L powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors,windows & ventilators including providing & fixing hinges/pivots/rollers/locks and making provision of fittings wherever required incl cost of EPDM rubber/neoprene gasket required with of approved make ,fixing of dash fasteners of required dia & size incl necessary filling up the gaps at junctions at top,bottom & sides with required EPDM rubber/neoprene gasket etc.Aluminium sections shall be smooth,rust free,straight ,mitred & jointed mechanically wherever required incl cleat angle,aluminium snap beading for glazing/panelling,CP brass/stainless steel screws all complete & as directed.
S&F for anodised aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC15) of approved design?pattern,with approved standard section & fixed to the existing window frame with CP Brass/stainless steel screws @ 200 mm centre to centre,incl cutting the grill to proper opening size foe fixing and operation of handles & fixing approved anodised aluminium standard section around the opening all complete as per requirement & as directed.
Refixing shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.
Refixing shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware as required and renewal of unserviceable screws complete all as specified and directed.
M&L 17/18mm thick prelaminated medium density fibre board (MDF) (one side decoratve and other side balancing white), exterior grade adhesive as in cup board shutters/ shelves and cabinets etc., fixed with screw/ nails alround complete all as specified and directed.
S&F steel windows or ventilators with side/top hung shutters with Z section iron work including box type friction hinges, steel handle, steel peg stay and glazing bars welded complete all as specified and directed.
S&F PVC Door frame solid of size 50mm x 47mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010 complete all as specified and directed.
S&F PVC Door frame solid of size 50mm x 95mm made out of 5mm plain colour PVC sheet re-inforced with MS square tube in opening as per specification and shown on drg SSR Part-II 2010 complete all as specified and directed.
M&L for second class hard wood plain , solid , straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.
S&F MS framed work as in doors frame,doors or gates ,door frame or other section with gusset plate, rails, braces etc complete, drilled for fixing of steel sheeting or other covering etc. to prepared for hanging or sliding with including either hooks and hinges, also fastening and fixing and similar work complete all as specified.
S&F including fabrication of framed work such as in grills, grating ,hold fast of door and window chowkat etc., with ends of bars shouldered and or riveted or forget into spikes, frames guard bars, barred iron doors, and similar work conforming to (Fe-410-W (Grade- E-280 quality, A) complete all as specified and directed
M&L for PCC 1:2:4 type B-1 (using 20mm graded aggregate) as in hold fast block including necessary form work etc complete all as specified and as directed
S&F 3 mm thick plain/pin headed sheet glass ordinary quality and glazing with oil putty wire clips in square n.exc 0.5 sqm in each pane complete all as specified and directed.
S&F 5.50 mm thick plain/pin headed sheet glass ordinary quality in each pane complete all as specified and directed.
S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples complete all as specified and directed.
S&F stainless steel butt hinges of size 100mm long for fixing door shutter etc complete all as specified and directed.
S&F 100mm size mild steel, butt hinges, cold rolled, meium weight complete all as specified and directed.
S&F 75mm size mild steel, butt hinges, cold rolled, meium weight complete all as specified and directed.
S&F aluminium anodised handles of extruded section 150mm long fixed with screws.complete all as specified and directed.
S&F aluminium anodised handle of extruded section 125 mm long fixed with screws.complete all as specified and directed.
S&F fancy type extruded SS handle 150 mm size complete all as specified and directed.
S&F in continuous (Piano) SS hinges, 30 mm width of flaps (when open) fixed with screws complete all as specified and directed
S&F magnetic catches with steel body ‘H’ type fixed to shutter complete all as specified and directed
S&F in repair in double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified.
S&F in repair aluminium (extruded section) door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters and of weight between 36 to 60 kg and fixed complete all as specified.
S&F 300 mm mild steel ordinary rat tail rod pattern springs incl roller & roller plate complete all as specified & as directed
S&F aluminium anodised barrel Tower Bolts of extruded section 150 mm long fixed with screws.complete all as specified and directed.
S&F aluminium anodised barrel Tower Bolts of extruded section 200 mm long fixed with screws.complete all as specified and directed.
S&F floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and directed.
S & F in repairs 100mm size, 4 lever, brass mortice lock for aluminium door lock including duplicate key complete all as specified and directed.
S&F in repair 20 mm dia Stainless steel curtain rod of wall thickness not less than 1mm with both side decorative brakets and fixing brakets complete all as specified and specified.
S&F hasp and staple satinless steel and fixed with screws 150 mm long complete all as specified and directed.
M&L preparation of newly steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
M&L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed
Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for preparation of newly plaster surface of wall and applying two coats of cement base paint including one coat of primer complete all as specified and directed.
Dismantling of first or premium quality floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.
S&F for first or premium quality glazed ceramic coloured tiles 300mm x 200mm size 6-7mm thick in dados or skirting over rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles complete all as specified.
M&L for glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.
M&L for 18 mm thick green marble of approved quality of any size, use as in cooking platforms, window cill etc set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding of edges including demolation of old stone slab compete all as specified and as directed.
S&F in repair powder coated GI ceiling suspension system false ceiling grid of 600x 600mm size with main tee, cross tee and wall angle grid hanging with 6mm dia Gl wire and roof fasteners or butterfly clips etc complete all as specified and directed.
S&F in repair 4 mm thick non asbestos fiber cement building board of 600x600 mm in size decorative finish fixed to aluminum /GI frame work with hold down clips in false ceiling complete all as specified and as directed.
S&F in repair solid PVC wall Lining consisting of 5 mm thick single side prelam PVC sheet includsive of solvent cement and fixing at site on PVC frame as per specifications and drawing.
S&F 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.
M/S VIVEK DUBEY
HARSH ASSOCIETES
TRINITY CONSTRUCTION
A R ENTERPRISES
Crown Engineering Corporation
JMD Enterprises
Siddhi Constructionn
M/S Garg Sons
oasis contractor builder and supplier
M/S A P CONSTRUCTION
M/S CHANDRIKA PRASAD AND SONS
Channa Brothers and Co.
G S ENTERPRISES
stage.html
html • 0.09 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .