Supply, Erection and commissioning of New Pumps for flood protection works at permanent Pump House RD 203 JLN and 3 No Sump well in W.S mech Division Rohtak

Amount

Supply, Erection & Commissioning of 5 C/s axial/Mix Flow Water lubricated Vertical Pumps of 5 Cs. Discharge at 1440 RPM at static head of approx 6.0 Mtr. with Y body, including MS Bend including flange welding, SS Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 30 HP, 1440 rpm, 3 Phase, 440 Volt+- 10%, with eficiency class IE2 suitable for fitment with 5 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department

Supply, Erection & Commissioning of 10 C/s axial/Mix Flow Water lubricated Vertical Pumps of 10 Cs. Discharge at 1440 RPM at static head of approx 9 Mtr. with Y body, including MS Bend including flange welding, SS Nut & Bolts etc complete in all respect as per site requirement with epoxy coating & as per approved specifications of the department

Supply, Erection & Commissioning of solid shaft Motor of capacity 60 HP, 1440 rpm, 3 Phase, 440 Volt+- 10%, with eficiency class IE2 suitable for fitment with 10 Cs. V.T axial/mix flow pump type vertical flange mounted as per approved specifications of the department

Supply, Erection & Commissioning of 60 HP fully automatic Star Delta Starter with all allied item like MCCB, Contactor, rating 150 amp,120amp,80amp, all type of protection relays (over voltage, Under Voltage, Over Current, single phasing preventer, delay switch), Power factor correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating as per approved technical specification of department

Supply, Erection & Commissioning of fully automatic star delta starter of 30 Hp as per Ip-54 suitable for 30 Hp Motor with all allied item like MCCB, Contactor, rating 120 amp,90amp,50amp, all type of protection relays (over voltage, Under Voltage, Over Current, single phasing preventer, delay switch), Power factor correction capacitor, digital meter, bus bar, thimble etc suitable and all live parts should be covered as per site demand and compartment coated with epoxy coating approved as per technical specification of department

Supply erection and commissioning of LTDB of 800amp capacity including all accessoriesas two incomer of MCCB 400amp with 6 no.outgoing of 200 amp and one no. MCB 63 amp for light loads like indicators,relays, meter, push button bus bar etc. suitable for operation of 1 no. motors of 60HP and one no motor of 30HP capacity as per as per approved technical specification of department

Supply, Erection & Commissioning of M.S delivery Pipe 258.9 mm inner dia.made of MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

Supply, Erection & Commissioning of M.S delivery Pipe 341.4 mm inner dia made of 6 mm thick MS Plate both end flanged (in >= 6 Mtr Pieces) as per approved specification & Make. (Including SS Nut & Bolt, Rubber Sheet 1/8" & other fitment accessory required)

Providing Complete double side plate earthing with 2 Earth Pits on both sides of sump well by boring and lowering 1.5" GI pipe, Filling Boring with Charcoal, copper strips, salt and fixing base plate, connecting this main earthing through copper strips/wire upto motors and panel as per site requirement

Providing & laying LT Armoured PVC aluminium cable of size 185 sq. mm, 3 ½ core conforming to IS 7098 -1985 as per approved makes.

Providing and laying LT armoured PVC aluminium Cable of size 120sqmm,3 ½ core confirming IS 7098-1985 as per approved make

Providing & laying LT Armoured PVC aluminium cable of size 95 sq. mm, 3 core conforming to IS 7098 -1985 as per approved makes.

Providing & laying LT Armoured PVC aluminium cable of size 50 sq. mm, 3 core conforming to IS 7098 -1985 as per approved makes.

ace marketing pvt ltd

M/s KRP Engineering Pvt. Ltd.