(LINE 03) Maintenance/Reparing and Annual Operating charges of pre installed fire fighting system at district male/female/ other hospitals,community health centers of Moradabad , Rampur, Amroha, Sambhal and Bijnor (Except DCH Bijnor).

Amount

Maintenance, repair, replacement and operation of pre-installed fire fighting equipment FIRE DETECTION AND ALARM SYSTEM

Supplying, installation, testin & commissioning of heat detector operating at 540C/570C with rate of rise cum fixed temprature (dualt thermistor ) Type with mounting base complete with all connection etc. as requred

Supplying, installation, testin & commissioning of smoke ditector with builting LED and mounting base complete with all conections etc. as required.

Supplying, installation, testin & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.

Supplying, installation, testin & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required

Supplying, installation, testin & commissioning response indicator on surface/recess MS box having two LEDs metallic cover complete with all connections etc as required.

Supplying, installation, testin & commissioning fire alarm sounder with facility to make announcement, mounted in M.S> box (16 SWG) with hanged cover plate & suitable for operation with amplifire i/c line matching transformer etc. complete as required.

Supplying, installation, testin & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hanged cover plate & suitable for operation with amplifire i/c line matching transformer etc. complete as required.

Supplying, installation, testin & commissioning talk back slave station in surface/recess suitable for operation on simples mode complete with P.T.T. knob & speaker/microphone enclosed in M.S. (16 SWG) ABS box with break glass in front etc. complete as required.

Supplying, installation, testin & commissioning sector panel suitable for following zones complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all conectins interconnections as required.

Providing and fixing Carbon-di-oxide fire extinguishers consisting of M.S cylindrical body, squeeze lever discharge valve fitted with internal discharge tube. 30 cms long high pressure discharge hose. Discharge nozzle, suspension bracket, confiming to IS:934 finished externaly with red enamel paint and fixed to wall with brackets with rawl plug dash fasteners complete with internal charge. Capacity 4.5 Kg

Refiling of Carbon-di-oxide fire extinguisher, Capacity 4.5

Providing and fixing of DCP type fire extinguisher ISI marked & TAC Approved complete in all respect.Capacity 5.0 Kg

Refiling of DCP type fire extinguisher, Capacity 5.0

Providing and fixing of ABC type (stored pressure) fire extinguisher ISI marked & TAC approved complete in all respect.

Capacity 4.0 Kg

Capacity 2.0 Kg

Refiling of ABC type (stored pressure) fire extinguisher, Capacity 4.0

Refiling of ABC type (stored pressure) fire extinguisher, Capacity 2.0

INTELLIGENT FIRE ALARM SYSTEM

Ten Loop Panel.

Two Loop Panel.

Supplying, installation, testing & commissioning of central graphical fire alarm management system to centrally monitor and operate the fire alarm system complete as required

Supplying installation, testion & commissioning of repeater panel with 320 character/Touch screen LCD display with inbuilt rset. Acknowledge and silence swithches complete as required.

Supplying installation, testion & commissioning of intelligent analog addressable phototermal detector complete with mounting base complete as requierd

Supplying installation, testion & commissioning of response indicator on surface/recessed MS Box having two LED metalic cover complete with all connections etc as required.

Supplying installation, testion & commissioning of intelligent addressable programmable sounder complete as required.

Supplying installation, testion & commissioning of fault isolator complete with base as required.

Supplying installation, testion & commissioning of intelligent aspiration detector for area coverage of minimum 500 sq ft complete as required.

Supplying installation, testion & commissioning of intelligent addressable termal detector with rate of rise cum fixed temprature thermistor complete with base as required.

Supplying installation, testion & commissioning of addressable fire control module complete as required.

Supplying installation, testion & commissioning of addressable phone control module complete as required.

Supplying installation, testion & commissioning of addressable beam detector with short circuit isolator (inbuilt or separate) complete with emitter and receiver including connections with remote test features etc momplete as required.

Supplying installation, testion & commissioning of intelligent addressable duct detector including suitable photo detector complete with base as required.

Supplying installation, testion & commissioning of addressable manual call point complete as required.

Supplying installation, testion & commissioning of addressable horn cum strobe complete as required.

Supplying installation, testion & commissioning of addressable strobe complete as required.

Supplying installation, testion & commissioning of fire fighter telephone handset complete as required.

Supplying installation, testion & commissioning of intelligent interface unit BAC net/ Modbus protocol i.e. supplying communication links between building management system and fire alarm control panel complete as required.

Supplying installation, testion & commissioning of fire fighter telephone jack complete as required.

PUBLIC ADDRESS SYSTEM

Supplying installation, testion & commissioning of 6 ZONE, Voice alarm controller with USB, MP3 player (including 6 zone button paging station) with seamless integration facility with main fire alarm panel for voice evacuation complete as required.

Supplying installation, testion & commissioning of 1.5/3/6W celling speaker complete as required.

Supplying installation, testion & commissioning of 1.5/3/6W metal box ceiling/wall speakers complete as required.

Supplying installation, testion & commissioning of ceiling /wall mounted loud speaker, 3/1.5 Watt in ABS enclosure complete as required.

Supplying installation, testion & commissioning of 6 inches dia, 2 watts, 70/100 volts ceiling speaker complete as required.

Supplying installation, testion & commissioning of digital audio amplifier 50 Watt. 25V rms operation at 240 volt AC supply complete ar required.

Suplying installation, testing & commissioning of digital audio amplifier 75 Watt, 25V rms operation at 240 Volt AC Supply complete as required.

Supplying installation, testion & commissioning of Voice comand keypad 6 zone, with microphone assembly complete as required.

ASPIRATION DETECTOR ACCESSORIES

Supplying installation, testion & commissioning of 25 mm Quter dia CPVC PIPE with end caps including making air sampling opening of appropriate dia on appropraiate interval and all accessories as required, (rate for area protected in sqm)

CABLING & WIRING

Supplying & laying of 2x1.5 sqmm fire survival armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extrudid layer of Cross Linkable Ethlene Propylene Rubber (EPR) insulation and LSZH inner bedding, steel wire armouring & LSZH outer sheath complete as required.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.

Supplying and drawing of cable Fire Retardant PVC insulated copper conductor cable in the existing surface/recessed steel conduit of following pairs, cores and size including connections and interconnections etc. as required.

Speaker cable Single pair, 2-core, 1.5 sqmm

Speaker cable Two pair, 2-core, 1.5 sqmm

Speaker cable Three pair, 2-core, 1.5 sqmm

Speaker cable Four pair, 2-core, 1.5 sqmm

Supplying and fixing 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.

2850 Ipm at 88 m Head

2850 Ipm at 70 m Head

2850 Ipm at 56 m Head

2280 Ipm at 88 m Head

2280 Ipm at 70 m Head

2280 Ipm at 56 m Head

1620 Ipm at 88 m Head

1620 Ipm at 70 m Head

1620 Ipm at 56 m Head

2850 Ipm at 88 m Head

2850 Ipm at 70 m Head

2850 Ipm at 56 m Head

2280 Ipm at 88 m Head

2280 Ipm at 70 m Head

2280 Ipm at 56 m Head

1620 Ipm at 88 m Head

1620 Ipm at 70 m Head

1620 Ipm at 56 m Head

2850 Ipm at 88 m Head

2850 Ipm at 70 m Head

2850 Ipm at 56 m Head

2280 Ipm at 88 m Head

2280 Ipm at 70 m Head

2280 Ipm at 56 m Head

1620 Ipm at 88 m Head

1620 Ipm at 70 m Head

1620 Ipm at 56 m Head

2850 Ipm at 88 m Head

2850 Ipm at 70 m Head

2850 Ipm at 56 m Head

2280 Ipm at 88 m Head

2280 Ipm at 70 m Head

2280 Ipm at 56 m Head

1620 Ipm at 88 m Head

1620 Ipm at 70 m Head

1620 Ipm at 56 m Head

(A) Supplying installation testing and commissioning of diesel engine driven main pressuristaion pump suitable for automatic operation and consisting of following. Complete in all respects as required. (Jockey Pump)(B) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. ( C ) Suitable HP squirell cage induction motor TEFC type suitable of operation on 415 volts, 3 phase 50Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325. (D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc, as required. (E) Suitable cement concrete foundation duly plastered with anti vibration pads.

180 Ipm at 88 m Head

180 Ipm at 70 m Head

180 Ipm at 56 m Head

300 Ipm at 88 m Head

300 Ipm at 70 m Head

300 Ipm at 56 m Head

(A) Repairing work of diesel engine driven main fire pump including rewinding of stator coil and required machining work Complete in all respects as required. (Jockey Pump)(B) Horizontal type, multistage, centrifugal pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. ( C ) Suitable HP squirell cage induction motor TEFC type suitable of operation on 415 volts, 3 phase 50Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325. (D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc, as required. (E) Suitable cement concrete foundation duly plastered with anti vibration pads.

180 Ipm at 88 m Head

180 Ipm at 70 m Head

180 Ipm at 56 m Head

300 Ipm at 88 m Head

300 Ipm at 70 m Head

300 Ipm at 56 m Head

(A) Supplying installation testing and commissioning electric driven terrace pump suitable for automatic operation and consisting of following. Complete in all respects as required. (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. ( C ) Suitable HP squirell cage induction motor TEFC type suitable of operation on 415 volts, 3 phase 50Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325. (D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc, as required. (E) Suitable cement concrete foundation duly plastered with anti vibration pads.

900 Ipm at 35 m Head

450 Ipm at 35 m Head

(A) Repairing work of diesel engine driven main fire pump including rewinding of stator coil and required machining work Complete in all respects as required. (Terrace Pump) (B) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. ( C ) Suitable HP squirell cage induction motor TEFC type suitable of operation on 415 volts, 3 phase 50Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-F insulation, conforming to IS : 325. (D) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc, as required. (E) Suitable cement concrete foundation duly plastered with anti vibration pads.

900 Ipm at 35 m Head

450 Ipm at 35 m Head

CONTROL PANELS

Fabrication, supply Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2 mm thick CRCA sheet, Compartmentalised with hinged lockable doors, dust and vermin proof, powedr coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals. numbering etc. complete in all respect, suitable for main fire pump. Pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415 V, 3 phase. 50Hz AC Supply with enclosure protection class IP 42 as required.

REPAIRING OF CONTROL PANELS

Repairing of Electrical control panel ratings three phase 415 Volts 50 Hz including replacement of all type insulators, busbar, all type insulation, analog and digital Ampere and volte meters & multy function meters demaged panel covers, luvers, filters and all type locks to proper reparing work.

PIPES & ACCESSORIES

Providing laying testing & commissionning of 'C' class heavy duty MS pipe conforming to IS 1239/3589 I/c fittings like elbows, tees flanges, lapers, nuts bolts gaskets etc. in ground including welding excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required.

200 mm dia (wall thickness = 6.3mm)

150 mm Dia

Providing laying testing & commissionning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including welding fittings like elbows, tees flanges, tapers, nuts bolts gaskets etc and fixing the pipe on the wall/celling with suitable clamp /support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm Dia

200 mm dia (wall thickness = 6.3mm)

250 mm dia ( wall thickness = 6.3 mm)

300 mm dia ( wall thickness = 7.1 mm)

Providing laying testing & commissionning of 'B' class medium duty GI pipe conforming to IS 1239 including welding, fittings like elbows, tees flanges, tapers, nuts bolts gaskets etc and fixing the pipe on the wall/celling with suitable clamp /support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required.

25 mm dia

32 mm dia

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm Dia

Supplying and fixing headed internal hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel ISI marked confroming to IS 5290 (type-A) with blank Gunmetal/Stainless steel cap and chain as required.

Single headed Gunmetal

Single headed Stainless steel

Supplying and fixing headed external yard hydrant valve with 1 No 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel ISI marked, conforming to IS 5290 (type-A) with blank Gunmetal/Stainless steel cap and chain as required.

Single headed Gunmetal

Single headed Stainless steel

supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm Dia

300 mm Dia

Supplying, fixing, testing and commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gunmetal seat ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 780 of following sizes as required.

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm Dia

300 mm Dia

Supplying, fixing, orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete with

Providing installation, testing and commissioning of non return valve of following sizers confirming to IS 5312 complete with rubber qasket, GI bolts, nuts, washers, etc. as required.

40 mm dia

50 mm dia

65 mm dia

80 mm dia

100 mm dia

125 mm dia

150 mm dia

200 mm dia

250 mm Dia

300 mm Dia

Providing installation, testing and commissioning of stainless steel Y Strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, Sheet with 3mm dia holes with stainless steel flange.

80 mm dia

100 mm dia

150 mm dia

200 mm dia

250 mm Dia

300 mm Dia

Supplying and fixing 63 mm dia 15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire rivets etc. conforming to IS 6.36 (type-A) as required

Gun metal

Stainless steel (Grade-304)

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water house thermaoplastic (Textile) reinforced) type-2 as per IS 12585 20 mm nominal internal dia gun metal globe valve & nozzle Drun and brackets for fixing the equipments on wall Connections from riser with 25 mm dia stop gun metal valve & M.S. pipe and socket.

Supplying and fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required

Gun metal

Stainless steel (Grade-304)

Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required.

2 way -100 mm dia M.S. pipe

4 way -150 mm dia M.S. pipe

3 way -150 mm dia M.S. pipe

Supplying and fixing air vessel made of 250 mm dia. 8 mm thick MS sheet 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories pressure gauge and painting with synthetic enamel paint of approved shade as requred.

Providing, fixing testing & commissioning of 15 mm dia quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories:

Pendient Sprinkler

Upright Sprinkler

Horizontal side wall sprikler

Concealed Sprinkler

Providing & fixing of pressure switch in M.S. pipe line including connection etc. as requred

Providing & fixing flow switch in following sizes M.S. pipe including connection etc. as requred

100 mm dia

150 mm Dia

Providing, fixing testing & commissioning of intallation control valve of cast iron body. Brass/bronze working parts comprising of water motor alarm. Bronze seat ckaooer, clapper arm and hydraulically driven mechanical gong bell to sonund continuous alarm when the wet riser/sprinkler system activaties. pressure gauges. emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass. test control box. ball valves. MS pipe of required size flanges. orifice plate gasket etc. of following sizes as required

80 mm dia

100 mm dia

150 mm Dia

Supplying installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 Psi test pressure of 875 Psi (Burst) with branch line (Inlet) 25 mm NPT male thread to sprinkler head (Outlet) 15 mm NPT female thread with reducer nipple, 2 side brackets, center braket, stockbar of following sizes complete as required.

Supplying installation, testing & commissioning of deluge valve (to be used for water curtains) UL listed with wet pilot basic trim assembly for DVA with test and alarm, drip and drain valve with water motor gong complete as required.

50 mm dia

80 mm dia

100 mm dia

150 mm dia

Supplying installation, testing & commissioning of water curtain nozzle 15 mm dia nickel chrome plated brass, BSPT, K-factor as per design consideration complete as required.

Supplying installation, testing & commissioning of adjustable rosette plate for 15 mm dia in white finish UL Listed or FM approved complete as requierd

Supplying installation, testing & commissioning of adjustable rosette plate for 15 mm dia in white finish UL Listed or FM approved complete as requierd Note: For cabling earthing and cable trays please refer to DSR (E&M) for digging of hard & soft soil please refer to DSR (Civil)

Operation of Fire Fighting System-

For District Male/Female/100 Baded MCH Wing/other Hospital

Operating Charges of Fire fighting System to keep the fire fighting system working continously pre-installed in hospital building consisting of LT breakers/Switch gear panels Fire Engine Pump, Main Water Pump and Jokey Pump and other fire related equipents etc. Three Experienced Holder Electricians cum fitter will duty eight hours round 'o' clock. Charges for three Electricians cum fitter to operate one fire fighting system in three shifts for 12 months.

For CHC /30 baded MCH Wing/Other Unit

Operating Charges of Fire fighting System to keep the fire fighting system working continously pre-installed in hospital building consisting of LT breakers/Switch gear panels Fire Engine Pump, Main Water Pump and Jokey Pump and other fire related equipents etc. One Experienced Holder Electricians cum fitter will duty eight hours round 'o' clock. Charges for one Electricians cum fitter to operate one fire fighting system in one shifts for 12 months.

N AND M ENTERPRISES

Arun Associates