Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹13.3 L+₹1.8 L (15.8%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹13.7 L+₹2.3 L (19.9%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹12 L
EMD Value
₹24,000
Closing Date
16 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (South) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
SPL REPAIR TO BLDG NO P-454 SINGLE OFFR ACCN IN ZONE-III AREA AT JAIPUR MIL STN UNDER GE (S) JAIPUR
2022_MES_559359_1
GE (S)/J-48P /2022-23 8746/E8
Open Tender
Civil Works
Item Rate
180 days
Jaipur
Class E and a(i) category
9 documents required · 9 mandatory
₹500
GE (S) Jaipur
₹24,000
Yes
28 Nov 2022
21 Oct 2022
18 Nov 2022
21 Oct 2022
16 Nov 2022
4 Nov 2022
Amount
Demolition of PCC in ground floors and pavings not exc 15cm thickness ( below or above ground level ), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 30
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 185
S&F light shade Vetrified Ceramic tiles edge cut 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM (1:6) finished fair and even, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 85
S&F Coloured Non Skid ceramic tiles 7 to 8mm thick edge cut/ joint free (squares/ rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 25
M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 450 mm, 7mm thick over and including 10 mm thick bedding layer in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 75
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 5
M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M & L for Brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) except bricks, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 1
Taking down cement plaster including raking out joints, hacking for key scrubbing down with water etc built in CM, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 650
M&L rendering 15 mm thick in CM(1:6) on brick walls or concrete surface, surface finished even and fair without using extra cement complete all as specified., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 200
M&L rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick work of walls, finished fair & even., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 350
M&L rendering 10mm thick in cement mortar 1:3 on concrete surfaces including finished even & smooth without using extra cement on ceiling., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 100
M&L preparation of new plastered surfaces and applying two coats of Oil bound distemper of approved shade/tint over 1mm thick Birla wall care putty on walls all as specified & directed by Engineer-in-Charge , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 200
M&L preparation of new plastered surfaces and applying two coats of Weather base paint over a coat of 1 mm thick birla wall care putty on wall all as specified & directed by Engrr -in-charge, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 350
M&L applying three coats of white wash on newly plastered surfaces of ceiling including preparation of surfaces., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 100
Hacking out old broken glass any thickness size, quality or description from wooden/steel frames fixed with wooden beads/metal pinning and S&F 3 mm thick sheet glass in squares not exc 0.50 sqm in each pane fixed with wooden beads or putty (in metal frames etc) complete all as specified., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
All as per Ser Item No 16 above but pin headed figured glass 4mm thick, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
All as per item No 18 above but area n exc 1.50 Sqm each., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 2
Taking down shutters of any description exc 1.00 sqm but n exc 2.50 sqm each , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 1
S & F in repair Auto close hinges,stainless steel, bright finish or electrogalvanised , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 6
M&L in repair 19mm thick MDF board in Shelf and shutters and partiation of kitchen cabinet, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 16
S&F in repair brass handle of 100mm size cast type, polished bright, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 15
S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 20
S&F Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
S&F Aluminium handles 125 mm size, cast type, anodised, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
S&F aluminium anodised floor door stopper overall length 140 mm double legged with rubber shoe, fixed to bottom rail of door, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
S & F in repair 100mm Mortice latch with two levers (vertical Type), brass body , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 7
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, suppling & fixing in opening as per specification & drawing, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 20
S&F Powder Coating any color (minimum thickness of powder coating 50 micron) Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 50
S&F Powder Coating any color (minimum thickness of powder coating 50 micron) Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) for including powder coating of any colour all as per manufacturers specification, complete all as specified and as directed by Engr-in-Charge. Note: The quoted rate shall be deemed to be included 4.8mm plain sheet glass/ stainless wire mesh 12/SR/61SA/BLDG/22-23: 16
S&F Powder Coating any color (minimum thickness of powder coating 50 micron) Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc , complete all as specified and as directed by Engr-in-Charge. Note: The quoted rate shall be deemed to be included 4.8mm plain sheet glass/ stainless wire mesh 12/SR/61SA/BLDG/22-23: 12
S&F 4mm thick figured glass , pin head type and glazing with oil putty in squares not exc. 0.5 Sqm in each pane, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 20
S&F Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staple, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 12
S & F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
"Water Proof Treatment to RCC Roof comprises the following, complete all as specified and as directed by Engr-in-Charge:- (a) Complete removal of existing roof treatement and disposed off the rubbish outside the defence land (b) All visible cracks to be opened up in V shape cleaned properly with wire brush washed and filled with cracks filling compound using cracks upto 15mm width of cracks (c) cracks of 15mm width are filled with URP cement grouting by injecting nozzles by authorised applicator of manufacturer carefully by following manufacturer's instructions (b) after drying one coat of roof coat paint shall be applied with roller in both directions with a gap of 12 hrs @ 1 Ltr per Sqm (each direction) of roof coat over a roof priming coat of 0.5 Ltr of water mixed to 1 ltr of roof coat (e) necessary gurantee for 10 years shall be submitted by the contractor Make: Sika/ Asian Paints (except Smart Care Damp Proof)/ IWL/ Berger Paints", complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 100
M&L in repair CP cast copper alloy bib taps two way with wall flange and areator fancy tupe of 15mm bore (Make- Parryware CAT PART NO T5034A1 Uno Two Way Bib Cock or equilvalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4 10
S&F in repair PVC connection 15mm bore with 2 Nos PTMT nuts, 45cm long fixed with one end to pillar tap & the other end to stop cock or iron pipe, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
M&L in repair CP Fancy type centre hole basin mixer 15mm bore cast copper alloy (Make- Parryware PART NO Activa G5346A1 Tall Basin Mixer or equivalent) , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L in repair CP wall Mixer with flange & 115mm long bend pipe for over head shower flanges and crutch etc quarter turn (Make- Parryware Alpha G2716A1 Wall mixer 2-in-1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L in repair Towel ring of brass C P Square flange (Make-Parryware CAT PART No T6904A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L in repair Chromium plated Overhead Rain shower with relvoling joint and 225 mm long shower arm with wall flange 15mm bore fancy type with arm (Make- Parryware CAT PART No T9814A1 Airmix Shower Head or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair of CP concealed stop Cock fancy type with long shank & cup cast copper alloy screwed down high pressure with crutch/butterfly handle screwed both end for iron pipe 15 mm bore (Make- Parryware CAT PART No Alpha G5053A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L in repair Chromium plated angle stop cock with wall flange fancy type cast copper ally 15mm bore any colour (Make- Parryware CAT PART No Alpha G2707A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 8
S&F in repair 15mm bore Bib taps, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed, fancy type chromium plated long body (Make- Parryware T5006A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair Counter top Vitreous China wash basin, coloured oval shape , size 550x400mm but including brackets, coupling and waste pipe fitted in granite counter slab of size 600mmx900mm, with MDF cabinets , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair CP bottle trap with internal partition 32 mm size with 300 mm X 190 mm long wall connection pipe and wall flange for WHB (Make-Parryware CAT PART T3201A1 Light 9” or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair waste fittings 32mm bore , brass, CP for glazed ware sinks, basins, etc with long screwed shanks & fly-nuts, flange end bedded in red lead cement & other end fixed (Make: Parryware CART PART NO T9911A1 or equivalent), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Demolition of old existing unserviceable EWC seat and S&F Snow white color Vitreous China WC wall mounted with flushing cistern incl PVC sheet cover size 670 x 390 x 760 mm (Make: Cera CLAIR Cat No. : S1031102 Two Piece Wall Hung Extended EWC Cat. No. S1060102 Cistern Cat. No. B1510108 Clair seat cover Cat. No. B1810105 Twin flush fittings or equivalent) , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Dismantling of old U/S grating and M&L of PVC Nahani / floor trap and square in size of 100X100 mm including MS chromium plated grating 125mm dia of weight not less than 50gm for floor trap / Nahani trap, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Dismantling and taking up or down the existing unserviceable GI pipe and M&L for new galvanised steel water tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors of following sizes :-, complete all as specified and as directed by Engr-in-Charge.
15 mm bore 12/SR/61SA/BLDG/22-23: 30
20 mm bore 12/SR/61SA/BLDG/22-23: 10
Dismantling of old water tanks and S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted & fixed in position all as specified in SSR Part I 1000 Ltrs Capacity, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L for providing circular, raised platform of height 20 cm below the tank and base 15cm more than the external dia of thank of PVC cylindrical water tank of capacity 1000 liters using PCC 1:3:6 type c1 using 20mm graded stone aggregate with smooth finish , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F Ball brass valves 20mm bore, high pressure, with polythene float & flynut complete, screwed for iron pipe or brass ferrule, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair elegent mirror PVC cabinet of size 450mm x 555mm (Make: Neelkamal Gem Mirror Plastic Wall Mount Cabinet or equivalent) , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair Soap dish brass CP (Make-Parryware CAT PART NO T6403A1 or equivalent) , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 8
S&F in repair Toilet paper holder of vitreous china fixed to walls with chromium plated (CP) brass screws (Make: Parryware Cat Part No. T6405A1 or equivalent) , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate as in sub base to floor finished fair & even all as specified and directed by Engineer-in-charge., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 100
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 100
M&L Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types over a screed bed or bedding layer of cement mortar 10mm thick in CM 1:4 for laying floor finishes (included in this item) , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 40
S&F in repair stop valve 15mm, copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair Stop valves 20 mm bore, copper alloy screwed down high presure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair PVC (SWR) pipes single socketed in any length with rubber ring joints 110 mm rain water pipe fixed to wall, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 15
S&F in repair PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
S&F in repair PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
S&F in repair PVC (SWR) bends any radius 75mm dia, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair PVC (SWR) bends any radius 110mm dia, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 75mm dia, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair PVC (SWR), junction single, (Single T) equal or unequal 110mm dia, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair PVC (SWR) vent cowl 110mm dia, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L in repair PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
M&L in repair PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair bathroom USF Glass corner 9x9 Inches - Glossywall mount (Transparent) glass wall shelf (Number of shelves- 3, clear, steel), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F in repair Fancy type MS bracket suitable for curtain rod , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
S&F in repair 20 mm dia Drapery Fancy type curtain rod made up of SS , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 20
S&F in repair Fancy type caps/ side Bulbs PVC powder coated suitable for curtain rod , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 10
M&L 50 mm thick cement concrete type B-1, 1:2:4 (20mm graded aggregate) as in plinth protection finished even and smooth without using exra cement including cutting joints @ 1.2m distance including providing and filling bitumen in the joints , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 22
E/M Portion Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 88
M&L Point wiring complete with 1.5 Sqmm single core PVC insulated and unsheathed multi stranded copper conductor FRLS cable of 1100 V grade PVC insulated and unsheathed cable drawn through in and incl concealed rigid PVC conduit 20 mm dia medium grade with all accessories ISI marked, including MS sunken box for mounting fitting like switches, sockets fan regulators modulor type etc. including 1.5 sqmm single core PVC insulated but unsheathed copper earth continuty conductor to common earth and connected FRLS cable 1100 V grade as continuous earth wire to earth dolly for followings, complete all as specified and as directed by Engr-in-Charge.
One light/fan/ bell point controlled by one, one way switch. 12/SR/61SA/BLDG/22-23: 56
One 3 pin 5 Amp socket outlet on same board with other switches., 12/SR/61SA/BLDG/22-23: 8
One 3 pin 5 Amp socket outlet on independent board with other switches., 12/SR/61SA/BLDG/22-23: 12
All as per Item No 81 above but with 4 Sqmm copper cable for 3 pin 15 Amps socket outlet on independent board, including 4 Sqmm copper cable continuous earth wire and connecting to common earth dolly., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 12
S&F switch/ bell of following types , complete all as specified and as directed by Engr-in-Charge.
Single pole, one way 5 Amp rating 12/SR/61SA/BLDG/22-23: 76
Single pole, one way 15 Amp rating 12/SR/61SA/BLDG/22-23: 4
Bell push Bell push, flush type, 5 amp. 12/SR/61SA/BLDG/22-23: 4
Bell Ding Dong AC 230volts single pole 12/SR/61SA/BLDG/22-23: 4
Supply and fixing of stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 8
S&F Socket, piano type 230/250 volts of following type, complete all as specified and as directed by Engr-in-Charge.
Socket 3 Pin, 2 in 1, 05 Amp rating 12/SR/61SA/BLDG/22-23: 20
Socket 3 Pin , 2 in 1, 5 &15 Amp rating 12/SR/61SA/BLDG/22-23: 4
M&L in repair Ceiling rose surface bakelite 65x50mm, three terminals, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 44
Supply & fixing in repair lamp holder PVC body complete all as specified and directed with 01xLED bulb 9 watt , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 8
Taking down exhaust fan of any type and capacity for safe custody to reuse and deposited to MES store yard., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Refixng the exhaust fan after minor repair on site oiling/ greasing/ nuts/ bolts connecting cable/ louvers etc., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 2
Supply & fix Exhaust fan steel body AC single phase 230 V of size 300mm sweep heavy duty with blades and frame and louvers all as specified and directed, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 2
Taking down existing ceiling fan from site and refixing the after doing necessary repair as oiling/greasing/changing of capacitor etc, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 8
Taking down fitting of any type, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 52
Supply & fix LED retrofit lamp ( size-4 feet), Regal Batten for LED tube, universal batten for T5 lamps surface/wall mounting IP 20 with twin core twisted flexible copper conductor cable with suitable size. Make - Havells cat No - REGALBATTENT5UPTO1X18WDSBSWH Or equivelent, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 44
Supply & fixing Mirror surface mounted LED fitting 14 W (2 Feet)provided with a high output PMMA diffuser for glare free light , IP 20 with high brightness LEDs complete with all accessories pre-wired twin core twisted flexible copper conductor cable with suitable size. Make - Crompton cat pt No- LCL-14-CDL or equivalent , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Supply and Fixing security lights LED 45 W Energy saving & Environmental friendly long life versatile pressure die cast aluminium IP 66 LED Wall mounted Light Luminaries are made of die casted aluminium body and toughened glass cover for uniformlight spread cames LED technology of Britelite. including bracket made out of suitable size of GI medium grade tubing and fixed with clamps nuts and bolts, washer complete all as specified . Make- CG cat Pt No-LSTP-45-CDL or equivalent , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
Taking down of DB of any type and capacity, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 5
S&F factory made, sheet distribution boards, SP&N 12 ways, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 4
S&F factory made, sheet distribution boards, TP&N 4 WAY, double door protection class IP-42 double door type suitable for mounting MCB/ MCCB, confirming to IS-13032, IS-8623, BS-5484 with minimum 200 amps, copper bus bar , complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 1
Taking down MCB SP/SPN of capacity, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 49
S&F MCB 10 KA confirming to IS-8828 : 1996, IEC-898 : 1995 rupturing capacity of the under mentioned type and rating, complete all as specified and as directed by Engr-in-Charge.
SP 5 to 32 amps 12/SR/61SA/BLDG/22-23: 40
SPN 32 to 63 amps. 12/SR/61SA/BLDG/22-23: 8
TPN 63 Amps 12/SR/61SA/BLDG/22-23: 1
M & L Sub main wiring complete with 2 runs of 6 Sqmm single core PVC insulated unsheathed cable 1100 V grade with multistranded copper conductor ISI marked drawn throughn and including PVC rigid conduit and conduit accessories fixed on surface/wall celing etc including provision of 1 run of 4 Sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 120
M&L Earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm burried directly in ground (earth pit not less than 2.25 meters deep below normal ground level ), with top edge of the plate not less than 1.5 mtrs below normal ground level , connected to and including galvanised earth strip 25X 4 mm by means of galvanised iron bolts , nut and washers and connected to other end to main panel board duly protected by galvanised iron pipe 25 mm dia " light grage " earth plate surrounded by packed layer of coat dust and common salt 15 cm thick all around bottom and top watering pipe 20 mm bore of galvanised iron " medium grade " with funnel all as shown on electrical plate No 5 of SSR part -I and connecting to earthing testing on completion including cast iron cover frane and PCC 1:3:6 type C-2 using 20 mm grade stone aggregate as in earthing pit with cast iron cover and frame including necessary earth work etc complete all as per specified and directed by Engr-in-Charge . ( Note : PCC Chammer shall be constructed atleast 1.5 mtrs away form the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner). 12/SR/61SA/BLDG/22-23: 5
Taking down US geyser (water heater) storage type of any type, complete all as specified and as directed by Engr-in-Charge. Note: Servicable geyser shall be used for refixing & unservicable to be deposited to MES store 12/SR/61SA/BLDG/22-23: 4
Refixng the geyser after minor repair on site, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 2
S&F electric water heater storage type stainless steel body with copper inner tank and heating element upto 2 KW capacity 25 litre BEE 5 star rate complete with all accessories such as safety valve thrmostate NRV connection pipe etc., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 2
Supply and fixing of single pole and neutral enclosure with a two pin and aearth plug and socket complete with one single pole MCB of 20 Amps 240 vlot, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 8
Taking down US cable of any size and capacity, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 160
M&L Laying, connecting and testing in trenches, under floors/ roads or on walls Cable XLPE insulated screened PVC bedded galvanized steel strips or wire armored, electric power cables (heavy duty) ISI marked with stranded aluminium conductor, 1100 volts grade, of size 25 sqmm, 3.5 core.(cable schedule under B), complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 160
Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre in depth for foundation etc or for shafts, wells, cess pits, manholes, pier holes, laying cables errection of poles / struts/stays etc n.exe 10 Sqm on plan not exceeding 1.5 metre in depth and getting out in any type of soil., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 39
Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm in any type of soil., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 31.5
Removing of excavated material (soil) to a distance n.exc 50 metre and depositing where directed at a level n.exc 1.50metre above the starting point, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 7.5
M & L Sand cushioning to PVC under ground cable with screened and washed sand and punning to provide a required cover., complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 31.5
M&L bricks for protection cover to under ground cable (with old size sub class `B` bricks) with width equal to length of brick laid dry and flat abutting each other with gaps between adjacent brick not exceeding 10 mm as directed by Engineer in-charge, complete all as specified and as directed by Engr-in-Charge. 12/SR/61SA/BLDG/22-23: 3.1
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .