Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.0 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹47.6 L+₹3.1 L (6.97%)Rejected-Finance | L2 | Rejected-Finance HIGHER BIDDER | |
| 3 | L3₹49.9 L+₹5.4 L (12.2%)Rejected-Finance C2 PAIXOMONTIRO APTS BEHIND NSD ALTO DABOLIM VASCO DA GAMA GOA 403 801 | SOUTH GOA | GOA | 403801 | L3 | Rejected-Finance HIGHER BIDDER | |
| 4 | L4₹50.1 L+₹5.6 L (12.7%)Rejected-Finance | L4 | Rejected-Finance HIGHER BIDDER | |
| 5 | L5₹50.4 L+₹5.9 L (13.3%)Rejected-Finance | L5 | Rejected-Finance HIGHER BIDDER |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
19 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI BIJENDRA SHARMA IDSE EE
GARRISON ENGINEER (NW) VASCO Opposite KV No.2, School, Shantinagar, Vasco-Da-Gama, Goa-403802
8524/E8
2023_MES_596411_1
8524/E8
Open Tender
Civil Works
Item Rate
180 days
VASCO
Class D Category a i
7 documents required · 7 mandatory
₹500
GE NW VASCO
₹90,000
Yes
21 Jul 2023
20 May 2023
21 Jun 2023
20 May 2023
19 Jun 2023
6 Jun 2023
20 May 2023 - 5 Jun 2023
Amount
Taking down chowkat / frame with shutters exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.
Taking down shutter of any description n exc 1 sqm each complete all as specified and as directed.
Taking down shutter of any description exc 1 sqm and n. exc 2 sqm each complete all as specified and as directed.
Taking down chowkat or frames n exc 1.5 sqm each and refixing in the same opening (w/o taking of shutters from the frame). Note : The rate should be inclusive of making good after refixing the door by replacing the damaged tiles or plaster.
Taking down chowkat or frames exc 1.5 sqm but n. exc 4 sqm and refixing in the same opening each (w/o taking of shutters from the frame and removing to store) Note: The rate should be inclusive of making good after refixing the door by replacing the damaged tiles or plaster.
S&F second class H.W factory made kiln seasoned, plain, solid, straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.
M & L Mild steel works as in bands, straps, clamps hold fasts and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and as directed.
M&L for providing, cement concrete 1:2:4, type B-1 using 20mm graded stone aggregate as in bed blocks for hold fasts, roof kerbs or mud stops, rounded or chamfered on edges etc. including weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed.
Forming jambs, etc. to openings including cutting toothing and properly bonding into old works also fixing jointing and pointing/ plastering to match with the existing work complete in cement mortar 1:4 complete all as specified and as directed.
S & F Flush shutters, solid core construction, 30 mm thick with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F second class H.W plane framed, factory made pannelled shutter 35mm thick (two pannel) with lock rail and panel of 9mm BWP commercial veneering on both faces, size of stiles and rails as per IX 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F second class H.W 35mm thick glazed and skeleton shutters, (factory made), open rebated and prepared to receive glass guaze etc with sash bars edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members as specified in SSR Part-I, section 8, clause 8.20(b) and fitted to chowkats complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolt 300 mm long with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring 150mm complete all as specified and as directed.
M&L painting to new wood and wood based surfaces of any description not otherwise described over 10cm width or girth two coats of synthetic enmel paint over a coat of pink primer including preparation of surface complete all as specified and as directed.
S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium wire staples to wooden /steel window / ventilator shutters complete all as specified and as directed.
S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperature 1.4 mm and fixed with aluminium wire staples to wooden / steel / aluminum window / ventilator shutters including wooden / aluminium beadings complete all as specified and as directed.
S & F aluminium anodised butt hinges 150mm size complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified and as directed.
S&F extruded aluminium alloy, fabricated type handle, anodised 150mm long complete all as specified and as directed.
Taking down of aluminium window/ ventilator of any type not exc 1.5 sqm each and fixing in the same opening after repair like or replace like locking handle, rubber, roller beading, wire mesh, glass etc all as directed. (Note : Glass and wire mesh only will be paid separately under relevant items)
Taking down of aluminium window/ventilator of any type exc 1.5 sqm each and fixing in the same opening after repair like or replace like locking handle, rubber, roller beading, wire mesh, glass etc all as directed. (Note : Glass and wire mesh only will be paid separately under relevant items)
Taking down chowkat / frame with shutters n exc 1.5 Sqm (without taking off shutters from the frame) complete all as specified and as directed.
Taking down chowkat / frame with shutters exc 1.5 Sqm but n exc 4 Sqm each with shutters (without taking off shutters from the frame) complete all as specified and as directed.
S&F aluminium powder coated window / ventilators shutter including frame, any type (sliding or openable) with frame, & other similar work etc. fabricated by using the JINDAL / HINDAL / CENTURY standard section including necessary arrangements to receive 4mm thick glass or wire mesh with aluminium chanel beading & stainless steel screws including the cost of rubber gasket / rubber beading etc. complete including necessary handles, roller wheels, hinges etc complete all as specified and as directed. (Note :- Wt of aluminium shall be measured exclusive of all fittings fixtures, hinges, handle, bolts, rubber gasket/ rubber beading and locking arrangements.)
S&F aluminium powder coated grill model/design No. DG 104 (10mm thick) of make Decogrill with DL 102 frame complete all as specified and as directed.
M& L for painting two coats of synthetic enamal paint over a coat of primer including preparation of old steel surface of any description, over 10cm in width or girth, not otherwise described complete all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.
All as per item No.28.00 above but from metal frame including punching or drilling out old glazing pins/ springs or drilling out old glazing pins/ spings clips and providing fixing new ones complete all as specified and as directed.
S&F sheet glass ordinary quality, 4mm thick and glazing with oil putty/wooden/metal beads in squars n exc 0.5 sqm each complete all as specified and as directed.
All as per item No.30.00 above but exc. 0.5 sqm each pane.
All as per item No.30.00 above but with pin headed/figured glass.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in position as directed. The rate should be inclusive of making good after fixing the door by replacing the damaged tiles or plaster and screw to fix the door complete all as specified and as directed.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with head moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rain & bottom rail panelling of plain gap insert for top rail & bottom rail paneling of plain color PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement. The thickness of PVC sheet (panel) should not be less than 10 mm. all as per per specification & drawing and directed.
All as per item No 34.00 above but wire gauzed i.e. panel will be of wire gauge in lieu of PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tube. The wire gauze shall be stretched to tighten firmly complete all as specified and as directed.
S & F aluminium anodised butt hinges 100mm size complete all as specified and as directed.
S&F aluminium anodised barrel tower bolts of extruded section 100mm long complete all as specified and as directed.
S&F extruded aluminium alloy, fabricated type handle, anodised 100mm long complete all as specified and as directed.
M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint (Ist quality)
Dismantling boarding of any description, fixed in any position with nails.
M&L 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated both side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in repair complete all as specified and as directed.
M&L for PVC kitchen Cabinet (18 mm PVC one side prelaminated sheets of Rajshri Plastiwood) complete all as specified and as directed.
M&L for PVC kitchen Cabinet 18 mm PVC both side plain sheets of Rajshri Plastiwood complete all as specified and as directed.
M&L for PVC kitchen Cabinet 12 mm PVC both side plain sheets of Rajshri Plastiwood) complete all as specified and as directed.
S&F 30mm wide flaps brass continous (Piano) hinges complete all as specified and as directed.
S&F Hasp & staple, safety type of Aluminium anodised 125mm complete all as specified and as directed.
S&F curtain rails 19mm dia anodised aluminium alloy with brackets stop rollers etc fixed in repairs complete all as specified and as directed.
M & L providing Aluminium (powder coated) snap grid frame work in repair for false ceiling of grid size 605 mm x 605 mm complete all as specified and as directed.
M & L 12mm thick mineral fibre perforated board (white) in repair, fixed with screws to aluminium snap grid false ceiling frame work (Note: Aluminium grid shall be measured seperately under relevant item of this Schedule.)
PRE-MONSOON MAINTENANCES TO BUILDINGS AT VARUNAPURI – I, II, III, MAP AREA AND MES ESTABLISHMENTS UNDER AGE B/R-II AND AGE E/M-II (B/R PORTION)
Dismantling of plain corrugated steel sheeting any thickness including similar pattern roof coverings complete all as specified and as directed.
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self-tapping screws all as specified & directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self-tapping screws all as specified & directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.
S&F mild steel framed work such as grills, gratings etc with ends of bars framed guard bars barred iron doors ladders framed balusters walkways railing framework of watertank and similar work conforming to Fe-290 (Gde E-265) complete all as specified and as directed.
M & L for rolled mild steel work as in roof trusses (framed), trussed purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc; conforming to Fe 410-W(Gde-E- 250) complete all as specified and as directed.
M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surface of any description, over 10 cm in width or girth complete all as specified and as directed.
Dismantling/taking out existing hessain base felt or any other existing water proofing treatment from roof including cement plaster and exposing the top surface of RCC slab including removing the dismantled debris to a distance exc 200m & n exc 250m complete all as specified and as directed.
Disconnecting existing water tanks, setting aside (or lowering if required) for repairs, cleaning, etc and hoisting if required, reconnecting and refixing in position upto 1000 Ltr capacity complete all as specified and as directed.
M&L APP based polymeric membrane minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyster non- woven fabric (wt. not less than 150gms/sqm) laid on primed surface by torch application method with minimum side overlap 100mm and 150mm as end lap over roofs after cleaning the surfaces properly with water and allowed to dry completely including priming surfaces for applying normal treatment complete all as specified and as directed.
M & L rendering 10mm thick (avg) on concrete surfaces over roof slabs, in cement mortar 1:4,mixed with liquid water proofing compound, finished even and smooth without using extra cement, to receive roof treatment complete all as specified and as directed. (Note: - water proofing compound shall be measured and paid separately)
Supply only liquid water proofing compound.
Taking down plastering (Cement plaster) on brick or stone walls etc including racking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed.
Rendering 15mm thick plaster in cement mortar 1:4 in two coats (10 mm thick backing coat + 5mm thick finishing coat) finished even and smooth without using extra cement including water proofing compound (Dr. fixit LW or equivalent 200ML per bag of cement ) etc complete all as specified and directed.
M & L preparation of newly plastered surface and applying two coat of raincoat. Prime the surface with a coat of PRIMESEAL diluted with potable water in ration 2:1 by volume prior to application of raincoat and allow it to dry for 2 to 3 hrs. Apply first coat of raincoat. Apply second coat of raincoat with an interval of 5 to 6 hrs and allow to cure for 7 days all as directed and as per manufactures instruction. Make: M/S Pidilite Industries Ltd or Equivalent in M/S Krishana conchen product/STP Ltd Note:- Priming coat and raincoat used shall be same Make/Manufactures.
M & L rendering 10 mm thick, on other than fair faces of brick or stone surfaces in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.
M & L rendering 5 mm thick in cement mortar 1:3 on soffit of ceiling, finished even and smooth without using extra cement all as specified and as directed. .
M & L preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and as directed.
M&L for preparing newly plastered surface of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and as directed.
M&L for preparation of old painted surfaces of wall and applying one coat of oil bound distemper complete all as specified and as directed.
M & L preparing the old treated surfaces of wall and applying one coat of exterior grade weather proof antifungal paint complete all as per manufacturers instructions and as directed
M&L preparing damaged chajja, drop, roof projections etc and providing PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate ) with use and waste of necessary form work & finally plastering the surfaces with 10 mm thick rendering in CM 1:4 complete all as specified and as directed.
Taking down PVC (SWR) pipes 75/110mm from walls including fittings complete all as specified and as directed.
M&L PVC pipe, 75mm bore, single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
All as per serial item No. 74.00 here-in-before, but PVC (SWR) pipe 110mm bore complete all as specified and as directed.
S & F PVC (SWR) bends, diminishing pieces or tapers, 75mm bore, any radius complete all as specified and as directed.
All as per serial item No. 76.00 here-in-before, but 110mm bore complete all as specified and as directed.
S & F PVC (SWR) branch piece, single, (Single Y), equal or unequal with access door, 75 mm bore size all as specified and as directed. .
S & F PVC (SWR) branch piece, single, (Single Y), equal or unequal with access door, 110mm bore size all as specified and as directed.
S & F PVC (SWR) branch piece, double, (double Y), equal or unequal with access door, 75mm bore size all as specified and as directed.
S & F PVC (SWR) branch piece, double, (double Y), equal or unequal with access door, 110 mm bore size all as specified and as directed.
S & F 110 mm dia PVC (SWR) vent cowl all as specified and as directed.
S & F PVC (SWR) gully trap 125/110mm, setting and jointing with siolvent cement all as specified and as directed.
PRE-MONSOON MAINTENANCES TO BUILDINGS AT VARUNAPURI – I, II, III, MAP AREA AND MES ESTABLISHMENTS UNDER AGE B/R-II AND AGE E/M-II (E/M PORTION)
Taking down U/S aluminium point wiring (light, fan, socket or power) complete including fittings and fixtures such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc removing materials for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed complete all as specified and directed .
Taking down U/S submain wiring Aluminium/ copper of any size/core/type including earth continuity condutor on teak wood or conduit and removing the materialss/ debris from site and making good the disturbed surfaces of wall etc to match with the original existing finish all as directed.
Taking down unserviceable existing TPN DB/ DB SPN 8/10/12 way of any capacity and size and removing from site and making good the disturbed surface of wall etc complete all as specified and as directed.
M&L Point wiring complete with 1100volt grade PVC insulated unsheathed multistranded 1.5 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC casing and capping medium grade of size 25/20 mm, etc fixed on wall/ceiling including provision of 1.5 sqmm PVC unsheathed copper conductor as earth conductor and connected to earth dolly, including provision of pressed steel terminal box with 3mm thick plastic laminated sheet top cover for housing switches, sockets etc concealed on wall complete all as specified and directed.
One light point controlled by one switch
One fan/ exhaust fan point controlled by one switch and regulator
One 3 pin socket, 5 Amps on the same board, with cables 1.5 sq. mm size
One 3 pin socket outlet, 5 Amps, independent, with cables 1.5 sq. mm size
One light point controlled by two 2-way switches, with cables 1.5 sqmm.
One call bell controlled by one push button on the same board with other switches or independent with cables 1.5 sqmm
M&L for point wiring complete with FRLS 1100 Volts grade, two runs of 2.5 sqmm copper cable through PVC casing and capping with one run of 2.5 sqmm PVC insulated and unsheathed multistranded copper conductor cable as earth continuity wire connected to common earth dolly complete all as specified and directed
Switch piano, flush type single pole, one way 5 Amp complete all as specified and as directed.
M&L switch piano SP two way 230 V complete all as specified and as directed.
M&L Switch socket combination 2 in 1, 5A 3 Pin and 5A 2 pin combined flush type, 230 V, complete all as specified and as directed.
M&L Switch socket combination 5 in 1, 5A /15A combined flush type, 230 V, complete all as specified and as directed.
S&F Bell push 6 Amp, flush type, modular 230 volts, 50 HZ ,AC supply 01 module all as specified and directed.
S&F Ding dong Bell, AC, 230 volts, single pole 50 HZ AC supplyall as specified and directed.
S&F ceiling rose three terminal 230 volt 50 HZ AC supply all as specified and directed.
M & L for submain wiring complete with 1100volt grade PVC insulated unsheathed multistranded cable with 1100volt grade PVC insulated unsheathed multistranded 02 run of 06 sqmm copper conductor cable confirming to IS 694 FRLS drawn through and including rigid PVC Conduit in Ivory/Grey/white colour medium grade etc fixed on wall/ceiling including provision of 01 run of 6.0 sqmm PVC unsheathed copper conductor and Connected to earth dolly complete all as specified and as directed. Note :- 02 runs of 06 sqmm and 01 run of 6.0 sqm including 01 run of PVC Conduit will be measured as one hit complete all as specified and as directed.
Supply and fix MCB DB,Double door single pole and neutral with suitable rated busbar double door, 8 way 230 volt 50 HZ AC Supply complete all as specified and directed.
S&F MCB SP 06 to 32 Amp 230 volts, 50Hz, Breaking Capacity 10 KA complete all as specified and directed
S&F Isolator DP 40 Amp 240 volts, 50Hz complete all as specified and directed
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete.
S&F deluxe stepped type electronic fan regulator flush type on the phenolic laminated sheet complete all as specified and as directed.
S&F lamp holder, PVC/ polycarbonated type with back plate suitable for batten fitting complete all as specified.
Supply and fix Exhaust fan with aluminium louvers 230V single phase metallic body, capacitor type -sweep size (mm) 300 connecting up including provision of necessary wall opening and connected cement works and cable from ceiling rose or connector to exhaust fan etc complete all as specified and directed. (Note: Old exhaust Fan deposited in store)
Taking down old unserviceable ceilling fan by disconneting and providing new ceiling fan 1200mm sweep complete with blades, down rods, electronic regulator and acessories, 230 Volt min air dilevery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC), hanging on the same location, reconnecting, testing and commissioning complete all as specified. Note:- The old ceilling fans will be deposited to the MES yard at AGE E/M-II of GE (NW) Vasco.
M/s Abhay Enterprises
M/S P S BABU
Paulraj Painters And Civil Engineering Contractors
KIRAN TRADERS
SHIVRAJ CONSTRUCTIONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .