REPAIR/ REPLACEMENT OF LT CONNECTION NETWORK INCLUDING LT PANEL IN TRG AREA AT DIV HQ IN URGENT BASIS UNDER GE SGNR

Amount

REPAIR/REPLACEMENT OF LT CONNECTION NETWORK INCLUDING LT PANEL IN TRG AREA AT DIV HQ UNDER GE SGNR (a) Taking down old U/S /rusted junction box and LT Pannel complete all as specified and directed- Each job- 07 Nos. (b) Taking down old U/S LT cable any size all as specified and directed- RM-376 (c) Supply, install, test and commisioning of duly powder coated Sheet metal enclosure Bus bar chamber copper bus bar of 4 way capacity 100 Amp with MCCB 63 Amps Adjustable thermal and adjustable magnetic release, 415 volts having rupturing capacity 16 KA -01 No as out going and incoming connecting cables of new/existing cables with suitable sizes aluminum thimbles including suitable angle stand with foundation work as per directed by Engr -in Charge- Each job- 06 Nos. (d) Supply, install, test and commisioning of LT panel duly powder coated of suitable size outdoor cubical type factory made, weather & vermin proof made out of CRCA sheet 3.15mm (outdoor type) thick machine pressed with bottom frame made out of angle iron 50mm x 50mm x 6mm and 600mm long 4 legs grouted in PCC 1:2:4 type B1 using 20mm graded stone aggregate blocks of size 30cm x 30cm x 60cm and 100mm thick PCC (1:2:4) type B1 floor over 100 mm thick sub base of brick hardcore extended 100mm on all sides below panel body complete and suitable for 415 Volt AC 3 phase, 4 strip having insulated Mains Copper bus bar 400 Amps for three phases and neutral , Panel with openable double shutter on both sides (rear and front side) with locking arrangment duly pre-wired with suitable size of copper conductor cable fitted with Incoming proper size copper lugs/thimbless and connecting the incoming and outgoing MCCBs with suitable size strip duly bended and drilled and fixed with nuts, bolts & washers from bus bar to MCCBs etc duly fitted with and including the following accesories & all connected iems complete. Incoming i MCCB 315 Amps four pole with Adjustable thermal and adjustable magnetic release 415 V AC supply having rupturing capacity 36 KA - 01 No Outgoing ii MCCB 160 Amps Four pole with Adjustable thermal and adjustable magnetic release 415 volts having rupturing capacity 25 KA - 1 Nos iii MCCB 63 Amps Adjustable thermal and adjustable magnetic release 415 volts having rupturing capacity 16 KA - 6 No. iv MCB TPN - 01 Nos 25 Amp -01 Nos v Indicating lamps set RYB - 01 Set vi Digital Amp Meter 0- 315 A with CT Digital Voltmeter 0- 500 V (e) Supply, laying & testing of XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 Volts grade cross-sectional area 25 Sqmm 4 Sqmm - 376 RM (f) Excavation in trenches, not exc 1.5 m wide and n. exc 1.5 m depth; or n exc 10 Sqm on plan and n exc 1.5 m in depth for foundations of poles, struts, stays etc. or laying underground cable etc. in soft/loose soil, & getting out complete all as specified and directed by Engineer-in-Charge- Cum - 95.04 (g) Returning, filling in, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed by Engineer-in-Charge- Cum- 56.71 (h) Removal of excavated surplus soil to a distance n.exc 50m and depositing where directed at level not exceeding 1.5 m above the starting point complete all as specified & directed by Engineer-in-charge- Cum - 38.33 (j) M & L for sand cushioning with dry coarse canal sand to under ground cable 23 cm thick, 8 cm thick below the cable and 15 cm thick after laying the cable complete all as specified and directed by Engineer-in-Charge. Note : Thickness after punning shall be considered for payment- Cum - 28.51 (k) Supply and lay PCC block Class LV, Type I, flat, size 250 mm x 150mm x 40mm complete all as specifed and directed- Each - 2347 Note- Make of all items mentioned above will be as per command approved list of HQ SWC

THAKURJI ENTERPRISES (BID ID -3259861)