Repair renovation works at NZATI Building at Muthi

Amount

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete

Providing and applying plaster of paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade. New work (two or more coats) over and including priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Renewing glass panes, with Putty & Nails wherever necessary : Float glass panes of thickness 4mm

Providing and laying vitrified floor tiles in different sizes (thickness) to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 ( 1 cement: 4 coarse sand) incl. grouting the joints with cement and matching pigments etc complete size of tile (60x60cm)

Providing and fixing white vitreous china pedestal type water closet (European type W.C pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied:

W.C. pan with lSI marked white solid plastic seat and lid.

Providing and fixing wash basin with C. I./M.S. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: (with pedestal)

White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing Towel ring with round F lauge

Providing and fixing stainless steel soap dish

Providing and fixing C.P. Jet

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931

15mm nominal bore

Providing and fixing C.P. Mixer of approved make

Providing and fixing C.P. Gratings with holes

Providing and fixing mirror of superior glass( of approved quality) and of required shape and size with plastic . moulded frame of approved make and shade with 6 mm thick hard board backing. Rectangular shape 453x357 mm

Providing and fixing waste pipe for sink or wash basin including 40mm dida PVC waste fitting complete

Providing and fixing 600x120x5mm glass shelf with edges round of supported on anodised aluminium angle frame with C. P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs, etc. complete

Engaged labur for cleaning of floors etc after completion of work, uprooting of rank vegetation, cleaning drains etc

Disposal of excavated earth by mechanical transport average lead 5.0 km including loading unloading complete as per direction of Executive Engineer

Providing and fixing PVC wall panelling including necessary screws etc

15mm Cement plaster on the rough side of single or half brick wall of mix: 1 : 4 ( 1 cement : 4 fine sand)

Finishing walls with textured exterior paint of required shade: Old work (two or more coats on existing cement paint surface applied @3.28 ltr/ 10sqm)

Earthwork in excavation by manual means in over areas (exceeding 30cm and upto 1.5mtr in depth, 1.5mtr in width as well as 10sqm on plain) incl. disposal of excavated earth upto 1 mtr from cutting edge, disposal earth is to be leveled and neatly dressed in all kinds of soil.

Providing and laying in position cement concrete of specified grade excl. cost of centering, shuttering, all work upto plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone agg. 40mm nominal size)

Providing and Laying in position cement concrete of specified grade 1:3:6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate) 20mm nominal size excluding the cost of centering and shuttering. All work up to plinth level (crushed stone aggregate)

Engaged labour for shifting of old sheet by way of dismantling etc

Providing and laying in position specified grade of reinforced cement concrete excl. the cost od centering, shuttering, finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement: 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size

Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete Thermo Mechanically Treated Bars

Carriage of material by Mechanical Transport including loading / unloading and stacking at site complete.

Stone aggregate 40mm and below average lead 10.0 Km

Sand dust average lead 10.0 Km

RAHUL ARORA

SHAINGAR RAM

Sohan Singh

M/S SURESH CHANDER

Rawail Singh

RGS INFRASTRUCTURE DEVELOPERS

M/s Balwan Singh

M/S GIRDHARI LAL PARIHAR

moti ram

ARUN KUMAR

Raju Sharma Govt Contractor