752776 ADDN ALTN CUM SPECIAL REPAIR TO CERTAIN MD ACCN UNDER GE MIS AT MHOW

Amount

SCHEDULE "A"

Item No 01 : M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement 1:6 and finished fair and even including taking down old plaster complete all as specified and directed.

Item No 02:- M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat mixed with WPC and 2nd layer 5mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml /50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

Item No 3 :- Material & Labour for rendering 5mm thick on concrete surfaces in cement mortar 1:3 finished even and smooth without using extra cement as in ceiling, Chajja etc. including taking down old plaster complete all as specified and as directed.

Item No. 4 :- Supply only liquid water proofing compound Pidiproof LW of Dr. fixit or equivalent of other specified make all as specified.

Item No 5 :- M&L for preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over a coat of alkali resistance primer incl 1mm thick wall putty complete all as specified and directed.

Item No 06 : M&L complete removal of existing treatment on walls and applying two coats of oil-bound distemper over a coat of primer on old plastered surfaces including necessary perparation to surfaces complete incl 1mm thick wall putty all as specified and as directed.

Item No 07 : M&L for preparation of newly plastered surfaces of walls and apply three coat of white wash complete all as specified and directed.

Item No 08 : M&L for preparation of old surface of walls and apply two coat of white wash complete all as specified and directed.

Item No 09 : M&L for preparation of newly plastered surfaces of ceilings and apply three coat of white wash complete all as specified and directed.

Item No 10 : M&L for preparation of old surface of ceilings and apply two coat of white wash complete all as specified and directed.

Item No 11 : Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

Item No. 12 :- M&L for Light shade Double charged/Ultra charge vitrified ceramic tiles 10mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 including dismatling of old tiles complete all as specified and directed.

Item No. 13 :- M&L for Light shade Double charged/Ultra charge vitrified ceramic tiles 10mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm in vertical surfaces etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick screed bed or bedding layer in cement mortar 1:4 including dismatling of old tiles complete all as specified and directed.

Item No. 14 :- M&L for Coloured joint free non skid ceramic tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 complete all as specified and directed.

Item No. 15 :- item same as item No 14 above but as in vertical surface of skirting including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

Item No. 16 :- M&L for non skid joint free ceramic coloured tiles of design as approved by GE 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including 15 mm thick screed bed in cement mortor 1:6 including dismantting old tiles complete all as specified and directed.

Item No. 17 :- M&L for glazed ceramic coloured tiles 300 x 200 x 7 to 8mm thick superior quality fixed on vertical surfaces such as dado / skirting etc set and jointed in neat cement slurry over 10mm thick rendering in cement mortor 1:4 and pointed in coloured cement to match including dismantling of old tile complete all as specified and directed.

Item No. 18 :- M&L for glazed ceramic coloured wall tiles (textured and disign as required) in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry over and including 10mm thick rendering in cement mortor 1:4 and pointed in coloured cement to match including dismantling of old complete all as specified and directed.

Item No. 19 - Demolition old laid bedded and pointed in any mortor Stone slabs and tiles of any description or thickness in floor, apron etc complete all as specified and directed

Item No 20 : - M&L for 18 - 20 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Item No. 21 :- M&L 20 to 25 mm thick machine cut Kota stone slab in flooring over and including 20 mm thick screed bed in cement mortar 1:6 laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polished complete all as specified and as directed.

Item No 22 :- M&L for Kota stone slab 18-20mm thick in riser, treads of steps, skirting, dado and pillar, window cill laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

Item No. 23 :- M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges (any type) and polishing to match the adjoining surfaces complete all as specified and directed.

Item No 24 : Taking down chowkats or frames not exc 1.5 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Item No 25 : Taking down chowkats or frames exc 1.5 sqm but not exc 4.0 Sqm each with shutters ( with out taking off shutters from the frames) complete all as specified and directed.

Item No 26 :- Taking down door shutter from frame exc 1 Sqm but not exc 2 sqm each and refixing the shutter in the same opening after easing and adjusting.

Item No 27 :- Taking down shutter of any description exc 1 Sqm and n. exc 2 Sqm each.

Item No 28 :- Taking down shutter of any description not exc 1 Sqm each complete.

Item No 29 :- M&L Second class hard wood (Sal) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Item No 30 : S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with MS square tube in opening of suitable size complete all as specified and directed.

Item No. 31 :- S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M. S. tubes for top and bottom rails. M. S. frame shall be covered with heat moulded both side prelam PVC 'C' channel having a PVC sheet strip of 20mm width stuch inside with solvent cement for stiles and both side prelam PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of both side prelam PVC sheet to fitted in the M. S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Item No 32 : S&F pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including one shop coat of priming complete all as specified and directed.

Item No 33 : M&L Providing cement concrete type C-1 1:3:6 (12.5mm graded stone aggregate for filling of Pressed steel frame etc, rounded or chamgered on edges complete all as specified, supplied and fixed

Item No 34 - S&F 35 mm thick second class hard wood rail and style plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commerical ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Item No. 35 :- Cutting holes in brick walls exc half brick but n.exc one brick built in cement mortar or cement lime mortor and stone walls built in lime mortor for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Item No 36 : - S&F mild steel flat iron as in bands straps, supports or stays for rainwater, ventilating pipes including bolt if required, hooks (stay) heavy for large gates,hook and pintle hinges,large hasps and staples, hold fasts, wall ties, hooks for hanging fans ,cleats for securing purlins to wood trusses or rafters and similar small articles conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No 37 :- S&F glazed skelten shutter, 35 mm thick, divided into squres plain chamfered open rebated and prepared to received glass guaze etc, edges of framing plain chamered or rounded fitted with cut and mitred beads for securing glass, etc sizes of members of shuters as specified in SSR Part-I, section 8, clause 8.24 (a) suppled and fitted to chowkats.

Item No 38 :- S & F Second class hard wood 30 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc, (with sash bar) edges divided into square,with plain, chamfered or rounded,mitered and rebated sash bars,any number, beads, for securing glass etc, sizes of members of shutters as specified in SSR part I section 8 clause 8.24 (b) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

Item No 39 : M&L for preparation of newly small article such as after feet, bracket or cantilevers n exc 30 cm projection and blocks, lebels, etc n exc 0.1 sq. m each and applying two coats of sythetic enamel paint over a paint of pink primer etc complete all as specified and directed.

Item No 40 : S&F second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like etc including all necessary labour, article not exc 200 cu cm each complete all as specified and directed.

Item No. 41 - S&F rolled mild steel section in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Item No. 42 :- M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Item No. 43 :- M&L for preparation of old painted surfaces of wood and wood based surfaces of any description, over 10 cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Item No. 44 :- Providing and fixing pre painted steel sliding window 3-track, 2 glass panel and 1 mesh panel sliding window fabricated from Roll formed sections made of galvanized steel colour coated/powder coated (Base Steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 GM/Sq.mtr) with total coated thickness of 0.58mm. Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 507 microns or powder coated with pure polyester powder up to 50-60 microns thick. Section for external frame should be of 107x44mm, Section for shutter should be of 35x49mm. Section of mesh should be of 35 x 49 mm. The windows should be paneled with 5mm thick plain float glass. Corner bracket for internal and external frame made of glass filled nylon. Gaskets are to be made of Ethyl Propylene Diamine monomer (EPDM). The sections are to be cut to length, joined and assembled by means of corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws conforms to IS-513:2008.

Item No. 45 :- Providing and fixing of double rebate openable/fixed windows made of galvanized steel colour bated/powder coated (base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams.sqm) with total thickness of coating 0.58 microns, primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with pure polyester powder up to 50-60 microns thick, outer frame section 72 x 55 mm. centre mullion section 72 x 50 mm. shutter section 47 x 20 mm, fly mesh section 40 x 20 mm and the fixed glass beading section 12 x 12 mm, outer frame and mullions shall consists rebate for glazed shutter fly mesh and 20 mm provision for guard bars/ grills, the sections cut to length mitre joined with corner bracket, centre mullions fixed withmullion cap, stay, handles, latch, 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade), fitted using EPDM (Ethyl Propylene Diamine Monomer) gaskets including fixing windows in the concrete/masonry wall by means of self-expanding screws, including 10mm Square bars welded to 6x12mm flat at a distance 150 mm c/c (pitch) etc. complete as per the direction of Engineer in Chargeconforms to IS-513:2008.

Item No. 46 :- Providing and fixing fixed louvers fabricated from Roll formed sections made of galvanized steel colour coated/powder coated (base steel as per IS 513 'D' quality, galvanized as per IS 277 with zinc of 120 grams/Sqm) with thickness of 0.58mm coated sections to be primer coat of epoxy primere of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder up to 50-60 microns thick, section for external frame 33 x 58 mm, glass holding flanges made of polypropylene, sections are to be cut to length, mitre joined with corner bracket. The above frames should be fixed to the concrete/masonry walls by means of self expanding screws conforms to IS - 513:2008.

Item No 47:- S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming to Fe -290 Gde E-165 complete all as specified and directed.

Item No 48 :- M&L for preparation of new or previously untreated surfaces of steel of any description, over 10cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Item No 49 : M&L for preparation of old painted surfaces of steel of any description, over 10cm in width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

Item No 50 : S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.

Item No 51 : S&F in repairs stainless steel wire mesh of size 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

Item No 52 - S&F 4mm thick sheet glass, ordinary qauality and glazing with oil putty in square n.exc 0.5 sqm in each panel including hacking out old broken glass from wooden/steel frames all as specified and directed.

Item No 53 - S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in n.exc 0.5 sq.m in each panel including hacking out old brocken glass from wooden/steel frames all as specified and directed.

Item No 54 :- S&F Butt hinges, medium weight, cold rolled mild steel 100 mm long complete all as specified and directed.

Item No 55 :- S&F Butt hinges, medium weight, cold rolled mild steel 75 mm long complete all as specified and directed.

Item No 56 :- S&F in repair 125 mm Double action spring hinges, mild steel with steel wire spring, stove enamelled, black, complete all as specified and directed.

Item No 57 : S&F aluminium, anodised, barrel tower bolts of extruded section 150 mm long complete all as specified and directed.

Item No 58 : S&F in repairs 150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified and directed.

Item No. 59 :- S&F aluminium handles cast type anodised of 150 mm size complete all as specified and directed.

Item No. 60 :- S & F in repairs 150 mm size aluminium anodized handle complete all as specified and directed

Item No. 61 :- S & F in repairs aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directe

Item No. 62 :- S&F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy of 300 mm length of bolt and 16 mm dia complete all as specified and directed.

Item No 63:- S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate of 300 mm length of bolt complete all as specified and directed.

Item No 64:- S&F in repairs 300 mm long aluminium alloy anodized sliding door bolts with Hasp and staple (bolt type) and fixing clips of sheet, cast or ectruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy comjplete all as specified and directed.

Item No 65 : S&F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Item No 66 : Roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water to remve dust etc and brushing neat cement slurry with 3kg of cement per sqm complete all as specified and directed.

Item No 67 : M&L for 15mm thick rendering on roof surfaces in cement mortar (1:4) using with WPC finished the surface even and smooth without using extra cement (Note:- Water proofing compound shall be paid separately)

Item No 68 - M&L for preparation of surfaces for applying bituminous primer (conforming to IS-3384-1965(@ 0.30 Kg/Sqm complete all as specified and directed.

Item No 69 :- M&L for applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2 Kg per Sqm including cleaning surface. 1st coat for bonding material below membrane and 2nd coat on top of membrane. Note:- Each coat shall be measured separately.

Item No 70 : M&L 3mm thick APP based poymeric membrane minimum weighing 3 kg/sqm and reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application including taking down old tarfelt water proofing treatment on roof surface & old plaster removed from site complete all as specified and directed. Note:- Application of APP membrane must be done by authorised applicator of membrane manufacture.

Item No 71 : M&L for applying two coats of bitumen based aluminium painting on water proofing treatment with preparation of surface as on non assesible area complete all as specified and directed.

Item No 72 : S & F in repair Water closet vitreous china squatting pan, orissa pattern 580x440mm white with integral foot rests excluding flushing cistern and flush pipe including provision of lime concrete bedding complete all as specified and directed.

Item No 73:- S&F in repair Vitreous China wash down water closet pan (4pedestal pattern), white (excluding fixing bolts, flushing cistern & flush pipe) include Plastic water closet white closed pattern with flat bottom, & cover & mild steel CP or aluminised hinging device.

Item No 74 : - Supply and fix in repairs under counter wash hand basins, vitreous china, white, of size 560x420x190mm (rectangular or oval shape) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and directed.

Item No 75 :- S&F in repair CP bottle trap 32 mm bore for wash basin with inlet and outlet screwed for connection including necessary packing union and cup and fixed.

Item No 76 :- S&F in repair 32 mm bore low density polythene pipe (LDPE) of pressure rating 6 kgf/sqcm for WHB and sink complete all as specified and directed.

Item No 77 :- S&F in repair 15 mm bore pillar taps, cast copper alloy with capstan heads, chromum plated, fancy type screwed down high pressure with or without lettered "HOT" or COLD" with long screwed shanks and fly nuts complete all as specified and directed.

Item No 78 :- S&F in repair CP brass fancy type 15mm bore bib taps, screwed down, and screwed for iron pipe or for brass ferrule Make: Jaquar cat part No CON-CHR-047KN or equivalent complete all as specified and directed.

Item No. 79 :- S & F rep CP fancy type stop valves, cast copper alloy concealed type, screwed both ends for iron pipe or for union of 15mm bore complete all as specified and directed.

Item No. 80:- S & F in repair 20mm bore dia stop valve cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for pipe or for unions and fixed complete all as specified and directed.

Item No. 81 :- S&F PVC 10 litres capacity PVC flushing cistern, low or high level, with inlet, ball valve, syphonic action type, float and handle, PVC Flush pipe, pull or push type including brackets complete all as specified and directed.

Item No. 82 :- S & F in repair sink mixer with swinging / rotatable spout with connecting legs & wall flanges Make: Jaquar cat part No ATR-3173B or equivalent of specified make under group - I complete all as specified and directed

Item No. 83 :- S & F in repair CP mixer for WHB mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and directed. Make: Jaquar cat part No SOL-6167B or equivalent of specified make under group - I.

Item No. 84 :- S & F in repair wall mixture cromium plated continental non telephonic wall mixer shower hot & cold, 15mm bore, bright finish with three joints screwed the ends for iron pipe and plugging complete all as specified and directed. Jaguar cat Part No CON-219KN or equivalent of specified make under group - I .

Item No. 85 :- S & F in repair Angle Stop valves one way. Brass chromium plated, fancy type, fixed to iron pipe or for unions 15mm bore complete all as specified and directed. Make: Jaguar cat Part No ARI-39053 or equivalent of specified make under group - I .

Item No. 86 :- S & F in repair fancy type chromium plated two way bibcock of 15mm cock screwed for iron pipe or brass ferrule etc complete all as specified and directed. Make jaquar cat part No ARI-39041 or equivalent of specified make under group - I .

Item No 87 :- S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mm bore dia of pipe complete all as specified and directed.

Item No 88 :- S & F in repair health faucet with flexible pipe of one mtr length including stand complete all as specified and directed. (Make:- Jaquar cat part No ALD-573 or equivalent of specified make under group - I ).

Item No 89 :- S&F in repairs over head shower 150x150mm *ABS body chrome plated with grey face plate) with rubit cleaning system complete all as specified and directed. (Make:- jaquar cat part No OHS-35495 or equivalent of specified make under group - I .

Item No 90 :- S&F in repairs CP Brass Fancy type shower rose 125 mm dia with shower arm 30mm long of approved quality complete all as specified and directed.

Item No 91 :- S&F in repairs Stainless steel toilet paper holder of brass cromium plated fixed to wall with brass screws complete all as specified and directed. (Make:Jaquar Cat Part No CAN-1153S or equivalent of specified make under group - I, complete all as specified and directed.)

Item No 92 :- S&F in repairs Soap dish )ovel) type mild steel chromium plated of size as sample kept in sample room complete all as specified and directed. (Make:- jaquar cat part No ACN-1131N or equivalent of specified make under group - I).

Item No 94 :- S&F in repairs PVC bath cabinet mirror type with shutter complete all as specified and directed. (Make:- Prayag cat No 551 or equivalent of specified make under group - I )

Item No 95 :- S&F in repairs brass chromium plated corner glass shelf 5.5mm thick with bracket complete all as specified and directed. (Make:- Plumber cat part No U-0923 or equivalent of specified make under group - I )

Item No 96 :- S&F in repairs shelf glass assembly consisting of 5.5mm thick sheet glass, shelf 120mm wide with CP bracket guard and railing 600 mm long complete all as specified and directed.

Item No 97 :- S&F PVC connections 15 mm size with PTMT nuts of length 600m fixed in repair.

Item No. 98 :- S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

Item No 99 :- S&F stainless steel plate rack for kitchen 1mm thick of best quality with suitable hanging arrangement and fixed to wall complete all as specified and directed by engr-in-charge Note:-size of plate rack should not be less than 900x1200mm and weight of rack shall not be less than 8.50 kg each.

Item No. 100 :- S&F grating doom 125 mm dia with waste hole of stainless steel (minimum weight 100 gms) complete all as specified and directed.

Item No 101 :- S&F brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed.

Item No 102 :- S&F in repairs of CP towel ring round complete all as specified and directed. Jaquar cat Part No AQN-CHR-7721.

Item No 103 :- S&F in repairs 25 mm dia stainless steel curtain rod with stainless steel decorative brackets at ends with arrangments as approved by GE complete all as specified and directed.

Item No 104 :- Cutting openings, through brick walls for door, window and other openings or enlarging existing openings. Converting window into door openings, etc. or cutting out defective brick work for under pinning, including provinding shoring, cleaning and stacking bricks, removing surplus serviceable bricks, hard-core, etc. to store and rubbish not exc. 50m built in cement mortar complete all as specified and directed.

Item No 105 :- cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-I as required superfacial area exc 150sqcm n.exc 400 sqcm complete all as specified and directed.

Item No 106 :- S&F GI tubing 15mm bore medium grade with all fittings & fixed complete to walls/ceiling or laid in floors including taking down old steel tubing all complete all as specified and directed.

Item No 107 :- Refixing old steel tubing and connections in new or old position walls, ceiling, floors etc. 15mm dia including taking down old tubing complete all as specified and directed.

Item No 108 :- S&F GI tubing 20 mm bore medium grade with all fittings & fixed complete to walls/ceiling or laid in floors including taking down old steel tubing all complete all as specified and directed.

Item No 109 :- Refixing old steel tubing and connections in new or old position walls, ceiling, floors etc. 20 mm dia including taking down old tubing complete all as specified and directed.

Item No 110 :- S&F GI tubing 25 mm bore medium grade with all fittings & fixed complete to walls/ceiling or laid in floors including taking down old steel tubing all complete all as specified and directed.

Item No 111 :- M&L cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves,lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exceeding 10 cm girth in stone/brick walls complete all as specified and directed.

Item No. 112 :- S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, for 500 ltrs capacity including dismantling of old water tanks and removing to stores all as specified and directed.

Item No. 113 :- S & F rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, for 1000 ltrs capacity including dismantling of old water tanks and removing from site complete all as specified and directed.

Item No. 114 :- S&F Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of 20 mm bore dia of pipe complete all as specified and directed.

Item No. 115 :- S & F in repairs 20mm dia Ball brass valves, high pressure, with polythene float and fly-nut complete, screwed for iron pipe or brass ferrule complete all as specified and directed

Item No. 116 :- Disconnecting existing tanks (500 ltr), setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position including cleaning and removing all acale and dirt etc from tanks and from mouiths of circulating pipes etc. complete all as specified and directed.

Item No. 117 :- Disconnecting existing tanks (1000 ltr), setting aside or lowering if required for repairs, cleaning etc and hoisting if required reconnecting and refixing in position including cleaning and removing all acale and dirt etc from tanks and from mouiths of circulating pipes etc. complete all as specified and directed.

Item No 118:- S & F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.

Item No 119:- All as per Item Ser 118 above but except pipe

Item No 120:- S & F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.

Item No 121:- All as per Item Ser 120 above but except pipe

Item No 122 :- S & F PVC (SWR) bends any radius 110mm dia

Item No 123:- S & F PVC (SWR) bends any radius 75 mm dia

Item No 124 :- S & F PVC (SWR) branch piece, single (single Y) equal or unequal 110mm dia

Item No 125 :- S & F PVC (SWR) branch piece, single (single Y) equal or unequal 75mm dia

Item No 126 :- S & F PVC (SWR) branch piece, double (double Y), equal or unequal 110mm dia

Item No 127 :- S & F PVC (SWR) branch piece, double (double Y), equal or unequal 75 mm dia

Item No 128 :- S & F PVC junction single (single T) 110mmdia equal or unequal with access door.

Item No 129 :- S & F PVC junction single (single T) 75 mmdia equal or unequal with access door.

Item No 130 : S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 100 mm bore of pipe complete all as specified and directed.

Item No 131 : S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for 75 mm bore of pipe complete all as specified and directed.

Item No 132 :- S&F for 110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall including taking down old PVC pipe complete all as specified and directed.

Item No 133 :- M&L in repair PVC (SWR) floor trap of diameter of outlet 75 mm, plain with grating including jointing with solvent cement complete all as specified and directed

Item No 134 :- M&L in repair PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

Item No 135 :- Demolition of cement concrete un reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Item No 136 :- Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for and removal of rubbish from site complete all as specified and directed.

Item No 137 :- M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and fair including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in quoted rate for concrete in plinth protection.

Item No 138 :- M & L for PCC 1:2:4 (type B 0) using 12.5 mm graded stone aggregate mixing with WPC as in levelling course in sunken portions, floors etc complete all as specified and directed.

Item No 139 :- M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling, sunken filling and mass concrete complete all as specified and directed.

Item No 140 :- M&L for rendering 15mm thick in CM 1:3 finished even and smooth wothout using extra cement in vertical sides with WPC and 72 hrs testing for water tightness by ponding of water complete all as specified and directed.

Item No 141 :- S&F GI tubes medium grade with all fittings fixed to walls and ceilings or laid in floors of 40 mm bore of pipe complete all as specified and directed.

Item No 142 :- S&F 100 mm hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

Item No 143 :- S&F continuous (Piano) hinges,mild steel, bright finish or electro galvanised width of flaps (when open) 40 mm complete all as specified and directed.

Item No 144 :- Dismantling of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards / slabs/ blankets any thickness including cover fillets complete all as specified and directed.

Item No 145 :- S&F 18/19 mm thick prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work complete all as specified and directed.

Item No. 146 :- S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Prelam colour having density of 600Kg/cbm manufactured by as ISO 9001-2015 certified company. Termite proof, water proof and flame retardant PVC sheet, manufactured by single layer extrusion process for one side prelaminated solid PVC foam sheet. PVC film laminate should be pasted on PVC sheet with suitable adhesive and approved shade.

Item No. 147 :- S&F 18mm thick factory made 100% solid rigid PVC (Poly Vinyl Chloride) foam sheet Plain colour having density of 600Kg/cbm manufactured by as ISO 9001-2015 certified company. Termite proof, water proof and flame retardant PVC sheet, manufactured by single layer extrusion process.

Item No. 148 :- S & F modular type stainless steel basket size 0.50 m x 0.53m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws incl all fixing arrangement complete all as specified and directed

Item No. 149 :- All as per item no 148 as above but basket size 0.50 m x 0.53 m x 0.15 m complete all as specified and directed.

Item No. 150 :- All as per item no 148 as above but basket size 0.50 m x 0.53 m x 0.21 m complete all as specified and directed.

Item No 151:- S&F 100 mm size MS mat/glossy finish handle complete all as specified and directed.

Item No 152 :- S&F stainless steel self closing hinge of 75 mm size for PVC door shutter complete all as specified and directed.

Item No 153 :- S & F 50x15 mm size magnet door catcher for closing for PVC door shutter complete all as specified and directed.

Item No 154 : S&F mild steel drawer cabinet channel for moving the drawer etc complete all as specified and directed.

Item No 155 : M&L for RCC (nominal mix) 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall,beam and column in floors, roofs, landings, balconies, canopies and in shelves and similar work complete all as specified and directed. Note - Reinforcement and form work shall be measured and paid separately.

Item No 156 : M & L use and waste timber form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for fair finished flat surface of concrete complete all as specified and directed

Item No 157 : Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Item No 158 : M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 litres per square metre of the vertical surface of the sub structure to a depth of 300 mm including excavating channel along the wall and rodding etc complete all as specified and directed.

Item No 159 - M&L for treatment of soil using emuision for post construction Anti termite treatment along external wall below concrete or masonary apron using chemical emulsion at the rate of 2.25 litres per linear metre including drilling and plugging holes etc. in plinth protection or apron complete all as specified and directed.

Item No 160 - M&L for post construction Anti termite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

Item No 161 :- M&L of voids in masonary using chemical emulsion one ltr per hole, at 300mm apart including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1cement :2 coarse sand) to match the existing floors.

Item No 162 :- M&L for post construction Anti termite treatment at point of contact of wood work by chemical emulsion (in oil or Kerosene based solution) @ 0.50 litre / hole by drilling 6 mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed.

Item No 163 :- S&F in repair 1.25 mm thick of steel rolling shutters without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, push pull or manual type complete all as specified and directed.

Item No 164 :- S&F safety lever locks with four levers for rolling shutters complete all as specified and directed.

Item No 165 :- S&F ball bearing for rolling shutters complete all as specified and directed.

Item No. 166 :- S&F Rolled mild steel in Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of grade Fe 410-W (Gde E-250) quality A complete all as specified and directed.

Item No. 167 :- S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 MPA as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.

Item No. 168 :- Cutting channels, groves or rebates n exc 15cm girth, land trimming surface with or without reinforcement all as specified and directed.

Item No. 169 :- S & F Cement concrete tiles 25cm x 25cm x 22mm thick, with grey cement & no pigment machine pressed, set, jointed & pointed in neat cement slurry in floors, cut & polished over and including 15mm thick screed in CM (1:4) complete all as specified and directed.

Item No. 170 :- Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5 m depth in soft /loose soil etc complete all as specified and directed

Item No. 171 :- M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 100 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No 172 : Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Item No. 173 :- Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/loose soil etc complete all as specified and directed

Item No. 174 :- M &L for brick work with modular, sub-class 'B' bricks, straight or curved on plan exc. 6m mean radius built in cement mortar (1:6), incl dismantling old bricks complete all as specified and directed.

Item No. 175 :- M&L heavy duty Endura coloured tiles of size 30cm x30cm x12 to 15 mm thick (with gray cement and pigments) set, jointed and pointed in neat cement slurry in floor, laid over and incl 15mm thick cement screed base in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab incl cutting, rubbing, grinding, including dismantling old tiles complete all as specified and directed.

Item No. 176 :- Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Item No. 177 :- M&L for providing stainless steel railing for stair case consisting of stainless steel pipes of different dia including socket, reducer, knobs balls and cups of matt finish, type and size as approved by Engineer-in-charge/GE

Item No. 178 :- supplied only Chain link MS galvanised fencing, any size or type

Item No. 179 :- Fixing only in repair chain link fencing including line wires, any mesh, size and type to any type

Item No. 180 :- preparation of new undecorated surfaces of wall and apply two coats of Anti fungal weather coat acrylic emulsion paint Apex ultima of Asian paints or weather coat emulsion of Berger over a coat of exterior grade wall primer of asian paint or berger and one coat of 1-1.5mm thick white cement based putty complete all as specified and directed Note:- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat. application of second coat will be got passed from engr-in-charge.

Item No 181 :- Material and labour for complete removal of old decorated plastered surfaces of wall, pillasters, cornices etc by brooming down or steel wire brushing scrapping down and washing with water after completion of precoat treatment apply two coats of anti fungal weather coat acrylic emulsion paint apex ultima of Asian paints or weather coat emulsion of Berger over a coat of exterior grade wall primer of asian paint or berger and one coat of 1.1.5mm thick white cement based putty complete all as specified and directed Note:- (a) Each stage i.e preparation of surfaces, application of primer, application of first coat. application of second coat will be got passed from engr-in-charge.

Item No 182 :- Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Item No 183 :- Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

Item No 184 :- S&F reinforced concrete pipes, class NP-2, laid and jointed with collars of150 mm bore of pipe complete all as specified and directed.

Item No 185 :- S&F reinforced concrete pipes, class NP-2, laid and jointed with collars of 200 mm bore of pipe complete all as specified and directed.

Item No. 186 :- M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No. 187 :- M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

Item No. 188 :- Removal of excavated materials exceeding 250 m but not exceeding 500 m and depositing where directed complete all as specified and directed

Item No. 189 :- BLANK

Item No. 190 :- BLANK

Item No 191 :- M&L for brick work with modular, sub-class 'B' bricks, straight or curved on plan exc, 6m mean radius built in cement mortar (1:6), complete all as specified and directed.

Item No 192 :- All as per item 191 above but except bircks (old bricks obtained from dismantling to be used)

Item No 193 :- M&L for rendering 10mm thick in cement mortar 1:4 on fair faces of brick or concrete surface of ceiling finished even and fair complete all as specified and directed.

Item No 194 :- M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Item No 195 :- M&L for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

Item No. 196 :- BLANK

Item No. 197 :- BLANK

Item No. 198 :- BLANK

Item No 199 :- Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Item No 200 :- M&L Broken stone or boulders hardcore of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Item No 201 :- M&L 75mm thick PCC type C-2, (1:3:6) using 40mm graded stone aggregate as in sub base etc all as specified and directed.

Item No 202 :- M&L for chequered cement concrete tiles (Glossy finish) 40cm x 40cm x25mm thick, set, jointed & pointed in neat cement slurry in floors with grey cement & no pigment laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Item No 203 :- S&F machine pressed precast concrete interlocking paver block (glossy finish) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment complete all as specified and directed.

Item No 204 :- M&L for sand filling under floor or in foundations including watering and consolidation complete all as specified and directed

Item No 205 :- M&L for rendering 15mm thick plaster in CM (1:4) on faces of brick work or concrete surfaces complete all as specified and directed.

Item No. 206 :- S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St -240 complete all as specified and directed.

Item No. 207 :- BLANK

Item No. 208 :- BLANK

INTERNAL ELECTRIFICATION Item No. 209 :- Taking down copper / aluminium point wiring (light, fan, bell, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit and makeing good distrubed surfaces ofwalls, floors etc. complete all as specified and directed.

Item No. 210 :- Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs /MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site.

Item No. 211 :- Taking down carefully copper/aluminium Sub main wiring of any size from surface /concealed /existing conduit of any height and removing materials at size and making good disturbed surfaces of walls,floors roofs etc complete all as specified and directed.

Item No. 212 :- Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 213 :- Taking down ceiling fan/exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 214 :- Taking down Existing single phase electric energy meter of any capacity after disconnecting all necessary electrical connections and deposit to MES store yard of AGE E/M complete all as specified and directed.

Item No. 215 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc including sunk in anodized pressed steel box for housing switch socket etc with white laminated 3mm thick hylam sheet cover ISI marked of suitable size, including PVC insulated multistranded copper conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good distrubed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 216 :- Description all as per item No 215 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 217 :- M&L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq mm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ivory colour including all accessories, heavy duty ISI marked, after chasing in wall/ceiling etc with sunken boxs 1.2 mm thick, 60 mm deep with earth dolly dully, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good distrubed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge for following :-

(a) One light point controlled by one, one way switch 5 Amps

(b) One fan point/exhaust fan point controlled by one, one way switch 5 Amps and regulator

(c) One light point controlled by one, two way switch 5 amps

(d) One 3 pin 5 Amps switch socket outlet point controlled by one switch on same board.

(e) One 3 pin 5 Amps switch socket outlet point controlled by one switch on the independent board.

(f) One bell point controlled by one, bell switch 5 Amps

Item No. 218 :- Description all as per item No 217 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.

Item No. 219 :- Description all as per item No 217 here in before but using 4.0 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unshealthed 1100 volts grade metal clad box suitable for 230 Volt AC supply including necessary running of 4.0 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly.(for AC Point)

Item No. 220 :- S&F switch Piano type single pole 5 Amp 230 Volts complete all as specified and directed.

Item No. 220(A) :- S & F for Switch Piano type single pole 15 amp, 230 Volts complete all as specified and directed at site.

Item No. 221 :- S&F switch Piano type 2 way switch 5 Amp 230 Volts complete all as specified and directed.

Item No. 222 :- S&F for switch bell push Piano type 5 Amp 230 Volts complete all as specified and directed.

Item No. 223 :- S&F Socket outlet 2 in 1, 5 pin 5 amp, 230 Volts complete all as specified and directed.

Item No. 223(A) :- S & F for socket outlet 2 in 1, 5 pin, 5/15 amp, 230 volts complete all as specified and directed at site.

Item No. 223(B) :- S&F switch socket combination 2 in 1, 3 pin, 6 and 16 Amp flush type universal, 230 volts complete all as specified and directed.

Item No. 224 :- S&F for ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.

Item No. 225 :- S&F for step type electronic fan regulator flush Type complete all as specified and directed at site.

Item No. 226 :- S&F for Modular Switch piano flush type, single pole, one way, and 5/6 Amp single module complete all as specified and directed.

Item No. 227 :- S&F for Modular Switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed.

Item No. 228 :- S&F for Modular Switch piano flush type, single pole, two way, and 5/6 Amp single module complete all as specified and directed.

Item No. 229 :- S&F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

Item No. 230 :- S&F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed.

Item No. 231 :- S&F for Modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed.

Item No. 232 :- S&F for Bell push modular 6 Amps single module complete all as specified.

Item No. 233 :- S&F for lamp holder, PVC / Polycarbonate type with back plate suitable for batten/slanting fittings complete all as specified and directed.

Item No. 234 :- S&F for Bell Electric Ding dong type suitable for operation on 230 Volt 50 HZ AC supply complete all as specified.

Item No. 235 :- S&F for modular type TV socket out let complete all as specified and directed.

Item No. 236 :- M&L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- four runs of 6 Sqmm cable, two run of 6 sqmm cable and one run of PVC rigid conduit will be measured as one unit.

Item No. 237 :- M&L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc two run of PVC insulated with (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- two runs of 6 Sqmm cable, one run of 6 sqmm cable and one run of PVC rigid conduit will be measured as one unit.

Item No. 238 :- S & F for sheet metal enclosure MCB DB TPN 4 way vertical type with 200 Amps rated bus bar 415 bolts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone manonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 239 :- S & F for sheet metal enclosure MCB DB SPN 8 way vertical type with 200 Amps rated bus bar 240 bolts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone manonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed.

Item No. 240 :- S&F for MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed.

Item No. 241 :- S & F for MCB single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Item No. 242 :- S & F for MCB single pole rated capacity 5 to 32 Amps 240 volt breaking capacity 10 KA 'C' curve complete all as specified and as directed.

Item No. 243 :- S&F for metal clad box suitable for 230 volt 50Hz AC supply three pin with MCB SP 20/32 Amps complete all as specified and as directed.

Item No. 244 :- S & F for water heater storage type, (Geyser) vertical / Horizental type as per site requirement with inner contaner of capacity 25 ltrs, electrically operated, AC 230 Volts, BEE 5 star rated, ISI marked including 04 Nos of hold fachner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold for Officers JCO's and OR Md Accn complete all as specified and directed.

Item No. 245 :- S&F for ceiling fan, 230 Volts, 1200 mm sweep with, BEE 5 Star Rated BLDC and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal complete all as specified and as directed.

Item No. 246 :- Labour only for refixing the celing fan/Exhaust fan obtained from item No 245 above with replacement cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete all as specified and as directed.

Item No. 247 :- S&F for Highly effcient LED Bulbs, 10 Watts, B-22 cap complete all as specified and as directed. Make:- Bajaj, Havells, HPL

Item No. 248 :- S&F for Decorative wall mounted luminaire made out of polycarbonate with unbreakable globe suitable for LED bulb and provision of LED bulb 10 watts complete all as specified and directed. Make:- Havells Cat No LHDLO6160099 or its equvalent in Philips, Bajaj.

Item No. 249 :- S & F for LED tube light fitting 10 watts batten aluminium extruded with decorative end caps with warranty option of 5 years from date of installation complete all as specified and directed. Make:- Bajaj Cat Part No BCLSB 10 NW or its equivallent model in Wipro, Philips.

Item No. 250 :- S & F for energy saving new generation 10 Watts LED bulk head fitting IP 65 luminaire with opel duffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make:- Bajaj Cat No BIBWP 10W LED or its equvalent in Philips, Wipro.

Item No. 251 :- S & F for wall mounted LED tube light fitting 20 Watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen output box type fitting, 230 volts and intregrated electronic dirver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. Make:- Cat part No BCLAB 20W WH LED P, Wipro Cat part No LL20-281-XXX065-ALI or its equvalent in Philips, Havells.

Item No. 252 :- S&F for energy saving new generation environmental friendly long life verstile pressure die cast aluninium IP-66 for security light fittings luminare with high power LEDs as light source and electronic driver of capacity 25 watts with prewired and warranty option of 5 years from date of installation and necessary mouting arrangement and provising of 2.5 sqmm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps nuts bolts complete all as directed by Engr-in-charge. Make:- Bajaj Cat Part No ENXT P 24L WH CR PC SD (Edge Plus series) or its equvalent in Philips, Wipro.

Item No. 253 :- S & F for energy efficient exhaust fan of 230 mm sweep made of metal body Ventil Air - DS type complete with louver with bolts nuts and washers size of the bolt 15 cm long 12 mm dia embedded in the wall including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base complete all as specified and directed at site.(Note:- Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted).

Item No. 254 :- S & F for PVC non-metallic rigid conduit ISI marked heavy duty white/Ivory colour and its accessories heavy duty ISI marked of size 20 mm dia for LAN, telephone and TV connections including cutting, chasses and making good distrubed surface to match with existing finish with plaster complete all as specified and directed.

Item No. 255 :- Supply, installation, commissioning and testing indoor type wall mounting LT Panel Board of minimum size 1.50 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable including four comparment for fixing of four Nos three phase KWH meter one no single phase meter and MCB TPN and providing glass view for reading of meter and providing rubber/PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCb input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415 / 440 volts grade including complete internal wiring with 10 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as specified as directed by Engieer - in - Charge. (For Officers G+1Md Accn)

OUTGOING (a) MCB, Tripple pole & neutral, 40 amps, 415 volts, 'C' curve, 10 KA all complete as specified and as directed - 04 Nos (Officers Accn) (b) MCB, single pole & neutral, 10 amps, 240 volts, 'C' curve, 10 KA all complete as specified and as directed - 1 No (Stair case lighting). (c) Fixing only serviceable existing electric meter - 01 No (obtained from item No 214) (d) Supply and fixing of three phase Electronic Energy Meter accuracy Class 1.0, 415 Volts, with in - home display 10-60A, 3 Nos self locking meter seal, LCD display with optical port, anti temper features, LCD test, serial no Date bill MD, instantaneous KW, Volts, PF, HZ, MD, total Tamper Count, Self Billing Code, Battery backup in absence of power for display active energy Kwh, including all incoming and out going connections. - 04 Nos.)Make-L&T, Cat No:WR301BC7D10 / Secure/HPL)

Item No. 256 :- Supply, installation, commissioning and testing indoor type wall mounting LT Panel Board of minimum size 1.20 m (height) x 1.20 m (breath) x 0.30m (depth) factory made CPRI approved panel, weather, dust & vermin proof indoor, double door, front openable including four comparment for fixing of five Nos single phase meter and MCB and providing glass view for reading of meter and providing rubber/PVC gasket of suitable size all sides of door, with copper busbar wrapped with PVC tape/sleeves with maintained the colour code and copper strip/wire busbar of suitable size to MCCB input and MCCB/MCB output of suitable length for connection of cable from main busbar, made out of 2.00 mm thick mild steel CRCA sheet with suitable size angle iron supporting frame including applying two coats of Powder coated paint over a coat of red oxide zinc chrome primer over exposed external & internal surfaces suitable for 3 phase 4 wire system 415 / 440 volts grade including complete internal wiring with 1.5 sqmm copper wire and connections of all outgoing / incomming existing cable of any size complete all as specified as directed by Engieer - in - Charge. (For Officers G+1 JCI, OR Md Accn)

EXTERNAL ELECTRICAL SUPPLY Item No. 257 :- Supplying and laying un-reinforced precast concrete cable cover, class LV, type 1 with peak of size 250 mm x 150 mm x 40 mm with minium average breaking load 200 Kg as per IS 5820:1970, ISI marked all as specified and directed.

Item No. 258 :- Supplying, spread and filling for clean dry rever sand in trenches/ducts for cushioning to cable, 8 cm in depth before laying the cable and 15 cm in depth after laying the cable complete all as specified and directed at site. Note:- Punned thickness only will be measured and paid.

Item No. 259 :- Boaring holes horizonatally under Road without damaging the surface of road (minimum 1.0 Mtr below the road surface with the help of GI tubing of any dia not exceed 80 mm bore for passing of UG cable all as specified and as directed (GIpipe laid shall be measured seperately).

Item No. 260 :- Supply & lay GI tubing light grade in protectionof cable at road crossing/ hard standing/pole protection fixed with clamps as per site requirement etc of following sizes complete all as specified and directed.

(a) 40 mm dia bore

(b) 25 mm dia bore

Item No. 261 :- Taking down existing old Extg unserviceable LT UG, service cable of any description and size complete all as specified and directed at site.

Item No. 262 :- Supply & laying & testing and commisioning LT underground cable 1100 volts grade, XLPE insulated and PVC sheathed heavy duty armoured with multistaranded aluminium conductor laid in pipes, trenches/ducts, lon poles etc of size complete all as specified and directed.

(a) 4 core x 35 Sqmm

(b) 4 core x 25 Sqmm

(c) 4 core x 16 Sqmm

Item No. 263 :- M&L for earthing complete with GI steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part -I including excavation and earthwork in any type of soil/strata and testing on completion Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted.

SCHEDULE "A" (Schedule of credit) Schedule of Credite Rs 1249908.00 (Minus) inserted by the MES (Note : Credite amount shall be deducted manually to arrive net bid amount)

Mata Builders

M/S Umashanker Mishra

M/s Gujarat Construction Company