Loading
Loading…
Loading…
Tender Value
Refer Docs
EMD Value
₹4.2 L
Closing Date
19 Jan 2026, 2:00 pmClosed
Single Packet
Normal Tender
No
Itemwise/Consigneewise
Lowest to Highest
TPI Agency
Not Applicable
150 days
Expenditure
General
07
4 conditions · 1 needing a document upload
Full/Bulk Order will be placed on tenderers with Satisfactory Past Performance. Please refer Clause 2.6 of IBD (V-3.0) attached with tender.
Developmental Order Quantity will be placed as per clause 2.6.2 of IBD (V-3.0).
Scope of similar item : Any type of Tamping Tool used in any type of Tamping Machines supplied to any Zonal Railways will be considered similar to tendered item.
Compliance of PPP (MII) Order 2017 as amended : In keeping with the Public Procurement (Preference to Make in India) Order,2017, as amended, it has been found that there is sufficient local capacity and competition in supply of the tendered item of required quality and therefore public procurement of the suppliers only and the vendors who do not qualify to be Class I local suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class I local supplier for the tendered item participates in the tender it does so at their own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor. The minimum local content for the local supplier of the above item, to be categorized as Class-I local suppliers shall be 50%.
33 conditions
Have you attached past supply performance Statement as per Eligibility Condition of the tender?
Have you attached self certification indicating percentage of local content and place of local value addition?
Have you deposited requisite amount of EMD and agreed to submit SD if you so not qualify for exemption from EMD/SD as per terms and conditions mentioned in ECR Integrated Bid Document Ver 3.0.
Bidders to indicate percentage of local content and provide self-certification that the item offered meets the local content requirement for Class-I local supplier and also give details of the location at which the local value addition is made.
EMD & SD : All bidders except those who are exempted from submitting EMD/SD as per para 5.0 & 6.0 of ECR Integrated Bid Document ver3.0 (copy attached), shall be required/shall agree to submit EMD/SD as per tender. Offers submitted by bidders without EMD who are not eligible for exemption shall be summarily rejected. Tenderers claiming exemption from submitting EMD/SD, shall be required to sign a bid securing declaration as per Annexure-A (copy enclosed).
This is a tender for supply of goods. Authorized dealers will not be eligible for MSE benefit for exemption from EMD and Purchase Preference as MSE.
Bidders participating as authorized dealer and their OEMs to please note and comply para 2.2.1 and para 2.2.2 of Integrated Bid Document ver. 3.0. Authorized dealers to submit tender specific authorization from the manufacturer without which the offer will be summarily rejected.
The tenderers in their bids shall indicate the details of their jurisdictional assessing officers (designation, address & e-mail ID)"
Liquidated Damage (LD) and General Damages (GD): LD and GD will be as per para 14.0 of Integrated Bid Document ver.3.0.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
1 condition
No deviation from the offer validity period stipulated in the tender is permitted.
1 location across Uttar Pradesh · 22 Set total
Tungsten Carbide Tamping Tools
07235365B~ECR
07235365B
Open - Indigenous
Goods
Uttar Pradesh
₹0
₹4.2 L
19 Jan 2026
26 Dec 2025
3 items · 22 Set total
Tungsten Carbide Tamping Tool (TCTT) for Plasser make UNI-4S Machine, One Set consisting of the two types of Tools: [1] Tungsten Carbide Tamping Tool (TCTT), Plasser Pt. No. CU-30-6820-BE-FRI = 08 Nos (as per RDSO Drawing No. RDSO/TM/01A/16) in a Set, [2] Tungsten Carbide Tamping Tool (TCTT) Pl asser Pt. No. CU-30-6220-BE = 08 Nos. in a Set (as per RDSO Drawing No. RDSO/TM/01B/16). Make: Plasse r or Equivalent as per RDSO specification No. TM/HM/6/320 (Rev-3-July 2019) with latest amendments. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CDMS/TMC/PD/MGS, ECR | Uttar Pradesh | 3.00 Set |
| Total | 3 Set | |
Set of modified carbide tamping tool for CSM-09-32 Machine. One set of consisting of four ty pes of Tools: [1] CU-30-4020-BE-FR-I = 16 Nos. (As per Drawing No. RDSO/TM/14A/16), [2] CU-30-4020- BE-FR-II = 4 Nos (As per Drawing No. RDSO/TM/14B/16), [3] CU-30-4020-BE FR-III = 4 Nos. (As per Drawin g No. RDSO/TM/14C/16), [4] CU-30-4020-BE-FR-IV = 8 Nos. (As per Drawing No. RDSO/TM/14D/16). Make: Plasser or Equivalent as per RDSO specification No. TM/HM/6/320 (Rev-3-July 2019) with latest amendmen ts. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CDMS/TMC/PD/MGS, ECR | Uttar Pradesh | 12.00 Set |
| Total | 12 Set | |
Tungsten Carbide Tamping Tools as per RDSO Specification No. TM/HM/6/320 [Rev-3-2019], with latest amendments. Each set consisting of Two types of Tools: [1] Plasser Part No. CU30.10840 FRI = 32 nos (as per RDSO Drg No. RDSO/TM/15A/16), [2] Plasser Part No. CU30.10840-FRV = 16 nos. (as per R DSO Drg No. RDSO/TM/15E/16). Make: Plasser or Equivalent as per RDSO specification No. TM/HM/6/320 ( Rev-3-July 2019) with latest amendments. [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| CDMS/TMC/PD/MGS, ECR | Uttar Pradesh | 7.00 Set |
| Total | 7 Set | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
5253787.pdf
ATTACHMENT
5614227.pdf
ATTACHMENT
5614223.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .