Expansion of Substation for managing future load demand of the Institute

Amount

HT Cable : - Supply,Transportaion , taking delivery ,unloading of HT Cable at site,Supply, Transportation, taking delivery ,unloading at site,testing & commissioning of HT XLPE insulated, E grade, cables (The testing shall including High Voltage T test at site before commissioning of the system & Test voltage shall be as per IS 7098) 3Cx300 Sq.mm 11kV Aluminum XLPE-E- Cable ( Round armoured)

HV CABLE JOINTING & END TERMINATION : Supplying and making indoor cable end jointing with cast resin compound, including lugs and other jointing materials, for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required. 300 sq. mm

HT CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 11 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Above 120 sq. mm and upto 400 sq. mm

Modification in Kiosk ( MSEDCL Metering Kiosk): Supply Installation & fixing of new C.T s & P.Ts, 2 Numbers in Metering Kiosk as mentioned in MSEDCL additional Load saction letter provided by clients. Work is including replacing with existing C.T & P.T for Main Metering Kiosk & Check Metering Kiosk & neccessory MSEDCL permissions & approvals for all modification work of point of supply including testing & calibration from MSEDCL. Ratio & Rating as under A. 6 Number of C.T ,Burden 10VA ratio -300/5A,class;- 0.2s - B. 6 Number of P.T ,Burden 50VA ratio -11Kv /110V,class;- 0.2

Dismantling the existing 11 KV, 2 Pole structure with brackets, clamps, insulators, stay from the cement concrete foundation and making the site clear by refilling the pits with excavated materials and bringing it to the ground level & scope is including dimentling of 11KV HT Cables, over head condutors, shifting all mertial from existing place to store as per instruction of Engineer Incharge. Work will be including all neccessory MSEDCL Permission & approvals.

HT PANEL:- Supply ,Transportaion ,Taking delivery at site storing at site,shifting from the place of storage to place of installation, installation,testing & commissioning of following HT/LT equipments. Modification of Existing 11KV HT Panel -02:- Supply,taking delivery installation, testing and commissioning & Modification in Existing HT Panel as per following . The scope also includes required site Hi voltge test of panels, ,Primary Injection /Secondary injections for Protective relays & measuring instruments etc.Refer Tender Single line diagram reference No :- IISER /CRN/EMEA/SLD/EL-02 & Technical spacification & Data sheets. 1) Existing 11 KV HT panel :- Replacing existing C.T with new propose ratio of C.T in existing HT Panel Incomer side mention as under 1.1) 300-200/1A,CL-01, 15VA :- 1NOS : 1.2) 300-200/1A,CL - 5P10,, 15VA :- 1NOS 2)Add one new cubical of 800Amp , VCB Panel coupled with existing 11 KV HT panel. All protection & specification will be considered for HT Panel as per Tender Single line diagram reference No :- IISER /CRN/EMEA/SLD/EL-02 Note:- Bus Bar Material type & D.C control voltage to be considered same as Existing 11KV HT Panel

Testing commissioning & installation of existing SF6 11KV HT RMU breaker scope of work including shifting from store to installation place & termiation of 11KV existing HT cable Testing including High Voltage Test , Meggar test at site as per instruction of Engineer Incharge, etc ( SF6 ,RMU Make :- Schneider/ Model Number :- T2/21)

UNITISED COMPACT SUBSTATION(CSS) Supply , Transportaion ,Taking delivery at site storing at site, shifting from the place of storage to the place of installation including , installation with all fittings and accessories, testing and commissioning of 11KV OUT-DOOR COMPACT UNITISED SUBSTATION(CSS) Comprising following HT/LT Electrical Equipments & as per technical specification & data sheet (a) 2 Way non extensible unit with 1 No isolator incomer and 1no outgoing circuit breaker 11kV ,630A, VCB suitable for Dry types AN-transforemr rated for 11k.V./0.433k.V.2000k.V.A.OCTC Link & Inbuilt self powerised Numarical 3 Overcurrent +1 EF Relay+ Stand by IDMT earth fualt realay (51G) & (64R) with shunt trip & inbuilt D.C Power Pack. Air Natural cooling shall be provided (b) 11/0.433k.V.,2000k.V.A.,AN, Dyn11,2.5 % step of , +5 to- 10 % , % impedance≥ 6.25% @ 75 ⁰C,Load Losses as per ECBC + Building Table 7.1 of ECBC 2017 50% Load Loss :- 7500W, 100% load Loss :- 20000W , OCTC Link Dry type Cast Resin Transformer with PT 100 base Temperature meter with 4-20m.A. Output for Remote temperature measuremnt (IBMS) (c.) 1No 4Poles,3200 Amp ,,65k.A. Microprocessor based Electrical Drawout type (EDO)( ACB) (d)1No Weatherproof IP 54 Enclosure for Above HT & LT Equipmets. (e) Provission for remote tripping contact shall be provided for LT site Transformer fault condition

Supply, Transportation , unloading at site ,installation ,testing and commissioning & safety of equipment till handing over of 'Silent Type' Diesel Generating set alongwith having prime Power rating of 750 KVA ,415 Volts at 1500RPM 0.8 Lagging power factor,consiting of the followings & as per Tender specifications. The sCope Including Fuel Piping with Automatic Level Detector for day tank & also includes exhaust piping as per CPCB norms & obtaining approval /Permission from CPCB/Goverment electrical Inspector, Local Muncipal authority etc. refer tender specification for D.G. Set

Supply, installation, testing & commissioning of Fittings, accessories for each 750KVA DG set Exuast Piping & supporting Structures :- Exhaust Piping as per CPCB Norms including all required bend & accessories (Approximate horizontal distance Vertical Distance with required Rock wool Insulation /Cladding & Chimney stack support fabricated from Various M.S. Section with 2 coat of Red oxide and 2 coat of finished Primer ,Lightning protection with Cu spike duly with Cu strip connected along with Chimney to Earth Pit , Air craft warning Luminaries duly with Heat resistance cable duly connected on Spacers/saddles etc. (All necessary accessories which required to complete the work. ) considered vertical height of 750KVA DG set Exuast Piping 6mtr for each D.G. set

MV Cable Laying:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm

MV Cable Laying:Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required Above 185 sq. mm and upto 400 sq. mm

MV Cable Laying:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required Upto 35 sq. mm (clamped with 1mm thick saddle)

MV Cable Laying : Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushining, protective covering and refilling trench etc. as required. Above 185 sqmm and upto 400 sq. mm

MV Cable Laying:Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required Above 185 sq. mm and upto 400 sq. mm (clamped with 25/40x3mm MS flat clamp)

MV Cable Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required. 630 sq. mm (clamped with 25/40x3mm MS flat clamp)

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required.

MV Cable Jointing & End Termination Supplying and making indoor end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cables of 1.1kV grade as required. 3½ X 25 sq. mm (28mm)

MV Cable Jointing & End Termination Supplying and making indoor end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cables of 1.1kV grade as required. 3½ X 185 sq. mm (57mm)

MV Cable Jointing & End Termination Supplying and making indoor end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cables of 1.1kV grade as required. 3½ X 300 sq. mm (70mm)

MV Cable Jointing & End Termination Supplying and making indoor end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cables of 1.1kV grade as required. 4 X 16 sq. mm (28mm)

MV Cable Jointing & End Termination Supplying and making indoor end termination with brass compression gland and aluminum lugs for following size of PVC insulated and PVC sheathed /XLPE aluminum conductor cables of 1.1kV grade as required. 1 X 630 sq. mm

Supply Of M.V. Cables M.V. ALCable supply : Supply, loading, transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XPLE insulated over all FRLS outersheathed , Aluminium conductor, armoured LT power cables as per IS 7098(Part 1) of following sizes.( Note :- Cable shall be considered Round armoured type ) 3 1/2 x 300 sq.mm ALuminium ,XLPE Armourd Cable

Supply Of M.V. Cables M.V. ALCable supply : Supply, loading, transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XPLE insulated over all FRLS outersheathed , Aluminium conductor, armoured LT power cables as per IS 7098(Part 1) of following sizes.( Note :- Cable shall be considered Round armoured type ) 3 1/2 x 185 sq.mm ALuminium ,XLPE Armourd Cable

Supply Of M.V. Cables M.V. ALCable supply : Supply, loading, transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XPLE insulated over all FRLS outersheathed , Aluminium conductor, armoured LT power cables as per IS 7098(Part 1) of following sizes.( Note :- Cable shall be considered Round armoured type) 4 X 16 sq. mm ALuminium ,XLPE Armourd Cable

Supply Of M.V. Cables M.V. ALCable supply : Supply, loading, transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XPLE insulated over all FRLS outersheathed , Aluminium conductor, armoured LT power cables as per IS 7098(Part 1) of following sizes.( Note :- Cable shall be considered Round armoured type 1x630 sq.mm ALuminium ,XLPE Armourd Cable

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 4X6 sq.mm Copper ,XLPE Armourd Cable

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 4X4 sq.mm Copper ,XLPE Armourd Cable

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 4X2.5 sq.mm Copper ,XLPE Armourd Cable

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 3X2.5 sq.mm Copper ,XLPE Armourd Cable

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 1 xCore x25 Sq.mm Copper Flexible FRLS Cables

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 1 xCore x16 Sq.mm Copper Flexible FRLS (Green Outersheath)

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 19X2.5 sq.mm Arm Copper Control cable

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 4C X 2.5Sq.mm. CU-Armoured PVC Insulated Flexibale Multicore

M.V. Cu Cable supply : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site, of 1100 Volts grade XLPE insulated over all FRLS outersheathed, Copper conductor, armoured LT power cables of as per IS :1554 (Part 1) of following sizes. .( Note :- Cable shall be considered Round armoured type ) 3C X 2.5Sq.mm.Shielded Copper eanlded -Armoured cable

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 4 x 6Sq.mm Copper ,XLPE Armourd Cable

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required .4 x 4Sq.mm Copper ,XLPE Armourd Cable

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 4 x 2.5Sq.mm Copper ,XLPE Armourd Cable

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 3X2.5 sq.mm Copper ,XLPE Armourd Cable

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 1 xCore x25 Sq.mm Cu FlexibleUnarmoured FLRS

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 1 xCore x16 Sq.mm Cu FlexibleUnarmoured FLRS (Green Outersheath)

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 19X2.5 sq.mm Arm Copper Control cable

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 4C X 2.5Sq.mm. CU-Armoured PVC Insulated Flexibale Multicore

End termination of Cu cable : Supply, loading ,transportation unloading at site, storages at site ,shifting from storage place to site,and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed/ PVC COPPER conductor cable of 1.1KV grade of following sizes as required . 3C X 2.5Sq.mm.Shielded Copper eanlded -Armoured cable

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required.

Providing and fixing 25 mm X 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode including connection with brass nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required.

Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required.

Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 50 mm X 6 mm G.I. strip on surface or in recess for connections etc. as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required.

Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.

Relocation of Existing Earthing Pits:- Relocation of Existing Earthing Pits from orginal location to proposed alternative location as per side conditions scope of work is including exavation of earth pits with chamber, earthing conductor/pipe/plate, disconnecting earthing strips from earthing pit & relocate earthing pit on new locations with earthing back filling material like charcoal/salt,reconnected earth pits with disconnected earth trips connection,require extension of earthing strips shall be provided as per existing size of earth strips etc.

Providing and fixing of lightning conductor finial, made of 25mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet orsurface of wall for lightning conductor complete as required.(For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run)

Cable Trays : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Cable Trays : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 300 mm width X 50 mm depth X 1.6 mm thickness

Cable Trays : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 450 mm width X 50 mm depth X 2.0 mm thickness

Cable Trays : Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 750 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 450 mm width X 50 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 750 mm width X 62.5 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 150 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 300 mm width X 50 mm depth X 1.6 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 450 mm width X 50 mm depth X 2.0 mm thickness

Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray "bends" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required 750 mm width X 62.5 mm depth X 2.0 mm thickness

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. Group A

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.Group B

Wiring for light/ power plug with 2X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for light/ power plug with 4X4 sq. mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit along with 2 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 20 mm

Supplying and fixing of following sizes of PVC conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. 25 mm

Supply & fixing following modular switch/ Socket on the exisitng modular plate & switch box including connection but excluding modular plate etc. as required 5/6 amps switch (For Power socket)

Supply & fixing following modular switch/ Socket on the exisitng modular plate & switch box including connection but excluding modular plate etc. as required 15/16 amp switch (For Power socket)

Supply & fixing following modular switch/ Socket on the exisitng modular plate & switch box including connection but excluding modular plate etc. as required 3 pin 5/6 amp socket outlet (For Power socket)

Supply & fixing following modular switch/ Socket on the exisitng modular plate & switch box including connection but excluding modular plate etc. as required 6 pin 15/16 amp socket outlet (For Power socket)

Supply and fixing modular blanking plate on the exisitng modular plate & switch box with matching colour including connection but excluding modular plate etc as required.

Supply & fixing following size/modules, GI box along with modular base and cover plate for modular switches in recess etc as required. 1 or 2 Module box (75mmx75 mm)(For Power socket/ELV Purpose)

Supply & fixing following size/modules, PVC box along with modular base and cover plate for modular switches in recess etc as required.3 Module box(100mmx75 mm)(For Power socket/ELV Purpose)

Supply & fixing following size/modules, PVC box along with modular base and cover plate for modular switches in recess etc as required.4 Module box(125mmx75 mm)(For Power socket/ELV Purpose)

Supply & fixing following size/modules, PVC box along with modular base and cover plate for modular switches in recess etc as required.6 Module box(200mmx75 mm)(For Power socket/ELV Purpose)

Supply & fixing following size/modules, PVC box along with modular base and cover plate for modular switches in recess etc as required.8 Module box(125mmx125 mm) (For Power socket/ELV Purpose)

Supply & fixing following size/modules, PVC box along with modular base and cover plate for modular switches in recess etc as required.12 Module box(200mmx150 mm)(For Power socket/ELV Purpose)

Supply & fixing following modular base and cover plate for modular switches in surface etc as required.1 or 2 Module (For Power socket/ELV Purpose)

Supply & fixing following modular base and cover plate for modular switches in surface etc as required.3 Module (For Power socket/ELV Purpose)

Supply & fixing following modular base and cover plate for modular switches in surface etc as required.4 Module (For Power socket/ ELV Purpose)

Supply & fixing following modular base and cover plate for modular switches in surface etc as required.6 Module (For Power socket/ ELV Purpose)

Supply & fixing following modular base and cover plate for modular switches in surface etc as required.8 Module (For Power socket/ ELV Purpose)

Supply & fixing following modular base and cover plate for modular switches in Surface etc as required.12 Module (For Power socket/ELV Purpose)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.

Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required.

Supplying and fixing brass batten/Angle holder including connection etc.as required

Supplying and fixing stiff pendent with 300 mm long, 20 mm dia X 1.6 mm thick steel conduit, aluminium cast back plate and brass holder complete, including wiring the down rod with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and painting etc. as required.

Providing and fixing 16/0.20mm (0.50sqmm) twin flat flexible,FR PVC insulated, copper cable, in PVC sleeve of suitable size on the floor/ wall, or side of the table/ door etc. as required.

Installation, testing and commissioning of pre-wired,fluorescent fitting/ compact fluorescent fitting of all types, with all accessories and tube etc., including supplying and fixing ball and socket arrangement, 2 no. down rods of 20 mm dia X1.6 mm thick steel conduit upto 30 cm length, painting and wiring the down rods and connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing etc as required.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep

Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes.

Supply, loading ,transportation, unloading at site, storages at site of following type light fittings including required integral control gears, lamps,& other accessories etc to complete the work as per Engineer -In -charge. Supply of LED 4ft Batten with a nominal system lumen output of 2000 lumens and a minimum system efficacy of 105 lm/W. The luminaire shall have a rated system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of CRCA with a PC glossy diffuser. The total power consumption should not exceed 40W (including driver). equivalent to Philips Cat No :- .BN308C LED40S-6500 L120 PSU WH

Supply, loading ,transportation, unloading at site, storages at site of following type light fittings including required integral control gears, lamps,& other accessories etc to complete the work as per Engineer -In -charge. Supply of LED based Flood light, housing made up of Pressure Die Cast Housing LM 6 Alloy/ Anti Dust Exposed Lens,sturdiness and embossed brand name/logo name of manufacturer. The fixture should have a minimum system efficacy of 100 lumen/Watt and a minimum system lumen output of 4000 lumens and maximum system wattage of 40 Watts.The fixture shall have a CRI of minimum 70. The fixture shall be designed for a system life of 50,000 hours @70% lumen maintenance. Ingress Protection of IP66 (lamp and gear Compartment) and Mechanical Impact Resistance Rating of IK >=05.The fixture driver should have an operating voltage range of 140-270 V, surge protection of >=3KV, PF >0.9 , THD<20% and SDCM<5. The driver should be BIS approved, fully potted and encapsulated Euivalent to Philips Cat No :- BRP409 LED CW 040 MR FG S1

Supply, loading ,transportation, unloading at site, storages at site of following type light fittings including required integral control gears, lamps,& other accessories etc to complete the work as per Engineer -In -charge. Street light Brackets:- Supply and installation of Galvanised 1000mm long with 20⁰ Angle Single bracket type with FRP dome and ball suitable for street light poles/ exterior wall approximately mounting height of brackes will be 6 mtr all necessary clamps & fixing accessories & weather proof Junction box (IP65) four terminal with single pole MCB & 4 wire loop in loop out connectores sutaible for connection upto 10Sqmm AL Cable etc.

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 12 way Double door

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Triple pole

Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.

Floor mounted bucket stand with buckets to hand 4 nos. of 13 ltrs buckets. The stand shall be 5'(L) x 3'(H) x 2"(W) made out of 30 x 300 x4mm MS angle frame duly coated with 2 coats of red oxide primer & 2 coats of red finish paint

Antiskid black rubber mat of approved make,12 mm thick 900mm wide x 1800mm Long chequered type as per IS-5424 in following 1.1k.V. voltage grade(Jyothi Make)

Antiskid black rubber electrical insulting mat of approved make, upto 33 KV 03 mm thick, 900mm wide x 1800mm Long chequered type as per IS-15652 in following 1.1k.V. voltage grade(Jyothi Make)

Supply , installation,testing commissioning of bay luminaries equivalent of wipro radical prime LED (80-200W) LH -09

First aid chart made of cloth for electricall shock treatment printed in English ,& Hindi duly framed with front glasses.

First Aid box with all the standard contents.

Portable 5 kg. dry type fire extinguisher suitable for electrical fire and as recommended by the tariff advisory committee.

Supply, fabrication and installation of cable tray supports, supports for cable trench covers, supporting frame for mounting of control panels, supports for mounting of local control station,Main Electrical Panel,lighting panel, lighting fixture etc. with 2 coats of enemel primer and 2 coats of epoxy paint Note - The rates shall be inclusive of grouting of supports , Anchor fastner,welding rods, nut,bolts,clamps,and any other consumable which required to complete the works.

Supply, of Exhaust fan 150mm light duty 230 V AC 50 Hz 450 mm 1400 RPM with condenser complete erected in position with n/c materials Fan motor with moisture treatment and class E insulation & With bird protective screen

Earth Work : Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10sqm on plan) including getting out and disposal of excavated earth leadupto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge Note: Working space and Provision of slopes if required for execution shall not be paid seperately. Rate to include all royalties, taking statutory approvals as necessary to carry out the works etc., complete : All Kinds of Soil

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Rate to include all royalties, taking statutory approvals as necessary to carry out the works etc., complete : - Excavation in ordinary rock

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms,lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. Rate to include all royalties, taking statutory approvals as necessary to carry out the works etc., complete Hard rock explosion prohibited

Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. All Kinds of soil and ordinary rock etc

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth,consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and laying in position ready mixed concrete manufactured in fully automatic batching plant and transported to site of work in transit mixer for a lead up to 10kms having continuous agitated mixer, manufactured as per mix design of specified grade for cement concrete work including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer ‐ in ‐ charge. M‐10 grade Reinforced cement concrete by using minimum 180 kg of OPC cement ( 43 Grade) per cum of concrete as per IS standard plus fly ash up to 20 % confirming to Grade I of IS 3812 (Part‐I) with uniform blending with cement in accordance with clauses 5.2 and 5.2.1 of IS 456:2000 . Note : Contractor shall submit the necessary design mix reports from the approved Lab for the above grade of concrete with 28 days test results to the Engineer in charge for the approval of design mix prior to start of any type of concreting works at site. The contractor should quote his rate considering minimum 180 kg of 43 grade OPC cement plus required fly ash as per IS code. In case additional qty of cement is required to achieve the desired target strength as per design mix ,the same shall be used but shall not be paid separately. ( for concrete under floors at plinth)

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level for 1:4:8 (1 Cement : 4 fine sand : 8 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Foundations, footings, bases of columns etc. for mass concrete. (For PCC side Shuttering)

Providing and laying in position ready mixed concrete M‐ 30 using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying, levelling and finishing the laid concrete top surface in line and level, curing, excluding the cost of centring, shuttering finishing and reinforcement including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer ‐ in ‐ charge. M‐30 grade Reinforced cement concrete by using minimum 345 kg of OPC cement ( 43 Grade) per cum of concrete as per IS standard plus fly ash 20 % or more confirming to Grade I of IS 3812 (Part‐I) with uniform blending with cement in accordance with clauses 5.2 and 5.2.1 of IS 456:2000 . Note : Contractor shall submit the necessary design mix reports from the approved Lab for the above grade of concrete with 28 days test results to the Engineer in charge for the approval of design mix prior to start of any type of concreting works at site. The contractor should quote his rate considering minimum 345 kg of 43 grade OPC cement plus required fly ash confirming to grade I of IS 3812 ( Part‐I) used as part replacement of OPC as per IS 456 with uniform blending with cement to be ensured in accordance with clause 5.2 and 5.2.1 of IS 456‐2000. Excess/less cement used as per design mix is payable/recoverable separately. Quote rate shall be inclusive of cost of all the materials, labour, machinery, all taxes, royalty and octroi etc.)

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Suspended floors, roofs, landings, balconies and access platform.

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts

Centering and shuttering including strutting, propping etc. and removal of form for removal of form for: Weather shade, Chajjas, corbels etc., including edges

Reinforcement for RCC work including straightening, cutting, bending, placing in position and bindnig all complete.Thermo - Mechanically treated bars

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 6 average compressive strength 60kg/sqcm in below plinth level in cement mortar 1:4 (1 cement :4 coarse sand)

Brick work with non modular fly ash bricks conforming to IS:12894, class designation 6 average compressive strength 60kg/sqcm in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement :4 coarse sand)

Fire Door 2hr rated ‐ Painted a)Providing and fixing of Hollow metal fire door at all levels from approved Manufacturer. Fire door should be as per IS 3614 part 1 and part 2 and BS 476 part 2 or EN 1634. All fire doors should be tested at CBRI/ARAI for maximum rating of 2hrs both with vision panel and without vision panel. Pressed Galvanized steel Single /Double leaf to required sizes for 2 Hour rating of approved make which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277 b)Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm thick galvanized steel sheet (16 gauge ). Frames should be MITERED and field assembled with self tabs. Door frames should be prepared for suitable hardware as scheduled and should have necessary reinforcement to withstand regular wear and tear. All provision should be mortised, drilled and tapped for receiving the hardware. Rubber door silencers should be provided on the striking jamb. All door frames should be provided with SOFIT bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. c)Door leaf should be 46mm thick fully flush double skin door with or without vision panel. Door leaf shall be manufactured from 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door should be rigid with steel stiffeners/ pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. d)The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision panel shall be of fire rated glass wherever applicable of size 300mm x 300mm with a clip on arrangement. The glass should be 6mm clear borosilicate glass of relevant rating of the door. All doors and frames shall be finished with etched primer coating (35 microns), stove zinc phosphate primer and thermosetting polyurethane aliphatic grade paint (35 micron DFT) of approved colour. Steel surface should be blast cleaned to near to clean surface. Once the surface is cleaned the doors should be checked for finish before it is taken for painting. e)Rate should include for supply and installation of door and hardware set as mentioned in the door and hardware schedule. f) Two hour rated door double leaf of size 1500 x 2400 with the following hardwares and fittings. vision panel of size 300x300 mm ‐ 2 no List of hard wares Ball bearing butt hinges ( fire rated ) SS‐ 304 of 100 x 89 x 3mm as Per EN 1935 with CE mark ‐8 nos Door closure EN 5 ‐ 7 ( Dorma TS 93 or equivalent ) with back check and delayed action in silver finish as per EN 1154 with CE mark‐1 No ( mounting feature & speeed ) ‐speed control / overload protection / regular, parallel & over mounting features to be made available. Half dome door stopper in SS304 ‐ 2 no Handle SS304 make Shall be tested for corrosion resistence in accordance with AS 2331.3.1Neutral salt spray test ( Dorma SH 812,Lockwood HO 2 or equivalent ) Lock shall be of dead lock type with Euro profile cylinder and to be escintheions as per EN 12209 with CE mark.‐ 1no tested for 500000 operation cycles ,cylinder and turn with escintheions as per EN 12209 with CE mark.‐ 1no Flush bolt L=300mm at the bottom and 600mm at the top ‐ 2 nos ( Each one )

Fire Door 2hr rated ‐ Painted a)Providing and fixing of Hollow metal fire door at all levels from approved Manufacturer. Fire door should be as per IS 3614 part 1 and part 2 and BS 476 part 2 or EN 1634. All fire doors should be tested at CBRI/ARAI for maximum rating of 2hrs both with vision panel and without vision panel. Pressed Galvanized steel Single /Double leaf to required sizes for 2 Hour rating of approved make which consists of frame, shutter, infill and finish as detailed below and conforming to IS 277 b)Door frame shall be double rebate profile of size 143 x 57 mm made out of 1.60mm thick galvanized steel sheet (16 gauge ). Frames should be MITERED and field assembled with self tabs. Door frames should be prepared for suitable hardware as scheduled and should have necessary reinforcement to withstand regular wear and tear. All provision should be mortised, drilled and tapped for receiving the hardware. Rubber door silencers should be provided on the striking jamb. All door frames should be provided with SOFIT bracket and anchor fasteners for installation on a finished plastered masonry wall opening. Once frame installed should be grouted with cement & sand slurry necessary for fire doors on the clear masonry opening. c)Door leaf should be 46mm thick fully flush double skin door with or without vision panel. Door leaf shall be manufactured from 1.2mm (18guage) thick galvanised steel sheet. The internal construction of the door should be rigid with steel stiffeners/ pads for receiving appropriate hardware. The infill material shall be resin bonded honeycomb core. All doors should be factory prepped for receiving appropriate hardware and provided with necessary reinforcement for hinges, locks, and door closers. d)The edges should be interlocked with a bending radius of 1.4mm. For pair of doors astragals has to be provided on the meeting stile for both active and inactive leaf. Vision panel shall be of fire rated glass wherever applicable of size 300mm x 300mm with a clip on arrangement. The glass should be 6mm clear borosilicate glass of relevant rating of the door. All doors and frames shall be finished with etched primer coating (35 microns), stove zinc phosphate primer and thermosetting polyurethane aliphatic grade paint (35 micron DFT) of approved colour. Steel surface should be blast cleaned to near to clean surface. Once the surface is cleaned the doors should be checked for finish before it is taken for painting. e)Rate should include for supply and installation of door and hardware set as mentioned in the door and hardware schedule. f) Two hour rated door Single leaf of size 1200 x 2400 with the following hardwares and fittings. vision panel of size 300x300 mm ‐ 1 no List of hard wares Ball bearing butt hinges ( fire rated ) SS‐ 304 of 100 x 89 x 3mm as Per EN 1935 with CE mark ‐4 nos Door closure EN 5 ‐ 7 ( Dorma TS 93 or equivalent ) with back check and delayed action in silver finish as per EN 1154 with CE mark‐1 No ( mounting feature & speeed ) ‐speed control / overload protection / regular, parallel & over mounting features to be made available. Half dome door stopper in SS304 ‐ 1 no Handle SS304 make Shall be tested for corrosion resistence in accordance with AS 2331.3.1Neutral salt spray test ( Dorma SH 812,Lockwood HO 2 or equivalent ) Lock shall be of dead lock type with Euro profile cylinder and to be escintheions as per EN 12209 with CE mark.‐ 1no tested for 500000 operation cycles ,cylinder and turn with escintheions as per EN 12209 with CE mark.‐ 1no

Providing and fixing Heavy duty grating for trenches, drains and water collection sump etc., of various size of opening in drain trenches made out of galvanized steel and all as per manufacture's specification of M/s Indiana gratings including necessary supports, suitable angle iron frames, grouting the supports using C.C 1:2:4 and finishing the surface neatly, welding the angle / Flat with consumables, Painting iron frame with 2 coats of Synthetic Enamel paint over a coat of Zinc phosphate primer etc. complete as directed by the Engineer in charge. Note : Nett weight will be measured for payment.

Structural steel work in single section fixed with or without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases including use of chequered plate wherever required, all complete.

Providing and fixing galvanized steel tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing and staircase railing including applying a priming coat of approved steel primer.

Supplying and fixing rolling shutters of approved make, made of required size M.S. laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. with 80x1.25mm M.S. laths with 1.25 mm thick top cover. size of the rolling shutter 3.00 m x 3.60 m including applying priming coat of zinc cromate primer etc complete as per the direction of Engineer in charge.

Providing and fixing ball bearing for rolling shutters.

Extra for providing mechanical device chain and crank operation for operating rolling shutters upto 16.80 sqm in the area.

Extra for providing grilled rolling shutters manufactured out of 8 mm dia M.S. bar instead of laths as per design approved by Engineer-in- charge, (area of grill to be measured).

Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Ridges plain (500 - 600mm)

52 mm thick cement concrete flooring with concrete hardener topping under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume .hardening compound is mixed @ 2 litre per 50kg of cement or as per manufacturers specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.

Cement plaster skirting (up to 30 cm height) with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement. - 18 mm thick

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) - 25 mm thick

Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

12mm cement plaster of mix 1:6 (1 cement : 6 fine sand)

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6mm thick cement plaster 1:3 (1 cement : 3 fine sand)

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : New work (two or more coats) over and including water thinnable priming coat with cement primer.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification.Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work

Providing and fixing G.I. chain link fabric fencing made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion - Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing and fixing adjustable aluminium louvre system, handles, cill section and 6 mm frosted float glass louvers with edges ground all as per drawings standard specifications and as directed by Engineer-in-Charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge.: Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 300 mm Dia.

Constructing brick masonry manhole in cement mortar 1:4 (1cement:4 graded stone aggregated 20mm nominal size), foundation concrete 1:5:10ix (1cement:5coarse sand: 10graded stone aggregated 40mmsize nominal size) in side plastering 12mmthick with cement mortar 1:3(1cement:3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement :2coarse sand :4graded stone aggregate 20mm nominal size) finished with floating coat of neat cement complete as per standard design: Inside size 120x120 cm and 100cm deep including precast RCC manhole cover and frame (HD‐20) in two pieces including providing and fixing of MS tee between two covers etc complete as per the direction of Engineer in charge.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External work -25 mm nominal outer dia Pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.: External work -40 mm nominal outer dia Pipes

Supplying and spreading graded stone aggregate 20 mm nominal size in layers of 200mm in tarnsformer yard etc complete as per the direction of Engineer in charge.

Painting with platinum series Indigo floor paintas per manufacture specification to give an even shade : Two or more coats on new work including priming coat.

Removing the existing top coat of the cement based water proofing at terrace and finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.

M/s SterlingElectro Enterprises.P.Ltd

Kulaswaminee Engineerrs

HITECH ERECTORS PVT. LTD.

Surendra Infrastructure Pvt. Ltd.