TENDER FOR ITEM RATE CONTRACT FOR REPAIR/REPLACEMENT OF JOINERY, PLASTERING, PATH, SANITARY FITTINGS,WALL, FLOORING AND OTHER MISC WORKS AT DCN,DBS AND 581 SUB GP DABATHWA UNDER AGE(HOSP) OFGE(U) E/M MEERUT CANTT.

Amount

Taking down of old unserviceable health faucet and S&F Bidet spray ( Health faucet) with 1 metre flexible tube & wall hook all as specified .

Taking down old existing unserviceable stop valve and S&F Chromium plated fancy type long body ,Concealed stop cock , cast copper alloy, screwed down for 15 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. complete all as specified and directed.

Taking down old unserviceable Bib taps and S&F Bib taps , cast copper alloy with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified.

M&L for preparation of old surfaces of walls by complete removal of existing treatment and distempering with two coats ofof exterior emulsion paint ( Apex or weather coat) , white or tinted over a coat of primer on surfaces of walls including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L plain cement concrete type B0 ( 1:2:4) using 12.5 mm graded stone aggregate as in door filling complete all as specified.

M&L Brick work with old size fly ash bricks., straight or curved on plan exc 6 m mean radius , built in CM 1:6, complete all as specified and directed.

M&L ( except bricks) Brick work with old size , straight or curved on plan exc 6 m mean radius , built in CM 1:6, complete all as specified and directed.

M&L 35 mm thick, 2nd class Hard wood Sal/ Hollock wood Glazed and skeleton door shutters , open rebated and prepared to receive glass, gauze, etc. without sash bars ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I; supplied and fitted to chowkhats complete all as specified.

M&L 35 mm thick ,2nd class Hard wood Sal/ Hollock wood, plain framed, panelled door shutters ( any number of panels ), with panels of 9mm thick BWP commercial plywood supplied and fitted to chowkhats complete all as specified.

S&F 30 mm thick factory made door Flush shutters , solid core construction , with blockboard core and plywood face panels, commercial type on both sides complete all as specified.

Taking down wooden Chowkhats or frames not exc. 1.5 sq.m each with shutters and guard bars ( without taking off shutters from the frames) complete all as specified.

Taking down wooden chowkhats or frames exc. 1.5 sq.m and n exc 4 sq.m. each with shutters and guard bars ( without taking off shutters from the frames) complete all as specified.

Taking down shutters of any description exc 1 sq.m and n exc 2 sq.m each complete all as specified.

Taking down shutters of any description exc 2 sq.m each complete all as specified.

Refixing shutters of any description exc 1 sq.m and n exc 2 sq.m each in the same opening complete all as specified.

Refixing shutters of any description exc 2 sq.m each in the same opening complete all as specified.

Taking down aluminium door with shutters of any size , reparing of hinge block and plate and fixing of door and shutters in the same opening in its position complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) con-sisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be cov-ered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain col-our PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all as specified and directed.

S&F Solid PVC door frame of size 50mmx47 mm made out of 5 mm plain colour PVC sheet reinforced with Mild steel square tube complete all as specified and directed.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

Taking down old unserviceable tower bolt and S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 150 mm length of bolt, ISI marked complete all as specified.

S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt, ISI marked complete all as specified.

Taking down of existing unserviceable barrel tower bolts and S&F Aluminium, anodised, barrel tower bolts of extruded section and fixed, 100 mm length of bolt, ISI marked complete all as specified.

S&F 300 mm long aluminium alloy anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

S&F in repairs 250 mm long Aluminium alloy. Anodised, sliding door bolt with hasp, staple ( bolt type) and fixing clips of sheet , cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified.

S&F butt Hinges, medium weight, cold rolled mild steel, 100 mm size, ISI marked complete all as specified.

Taking down old unserviceable helical door spring and S&F mild steel 300 mm long, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F 150mm long Extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

Taking down of old existing unserviceable drapery rod and S&F PVC coated , decorative drapery rod made out of mild steel 25 mm (OD) pipe having wall thickness not less than 0.63mm, 28mm overall thick comprising decorative side cups, brackets and curtain rings complete all as specified.

S&F towel rack 600mm long Model No. F5006102 of Cera or equivalent of other specified make complete all as specified.

Taking down old unserviceable tubular towel raiil of any size and S&F CP Brass Tubular towel rail, 20 mm dia. D type, 60 cm long between flanges complete all as specified.

Taking down of old existing unserviceable floor door stoppers and S&F floor door stoppers of aluminium alloy body and tongue, anodised with hard drawn steel spring , fixed in floor , overall length of cover plate 140 mm long complete all as specified.

Taking down of existing unserviceable door closer and S&F Aluminium ( Extruded section ) body Door closer hydraulically regulated, designation No. 3 , universal type , suitable for door shutters 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Taking down old existing unserviceable wire cloth and S&F Galvanised steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.90 mm and fixed with tinned tacks, or galvanised wire staples and fixing retrieved wooden beads including removing old unserviceable wire cloth complete all as specified.

S&F stainless steel wire cloth, 0.36 mm nominal dia. of wire and average width of aperture 1.90 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified.

Taking down existing unserviceable double action floor spring and Supply & fixing Double action floor spring hydraulically regu-lated made up of mini-mum 1.25 mm thick alu-minium alloy sheet foun-dation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. ( The rates quoted shall include taking down of aluminium door shutters and frame and resizing after necessary repairs ( where required ) and fixing in same locations).

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars , dovetailed or welded including one shop coat of red oxide primer complete all as specified.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars , dovetailed or welded including one shop coat of red oxide primer complete all as specified.

M&L Pressed steel frames for doors size 105x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc., complete, as specified, supplied and fixed

M&L Pressed steel frames for doors size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate , etc., complete, as specified, supplied and fixed

S&F aluminium anodised sections windows double leaves, double shutter side hung/ top hung comprising glazed and gauged shutters with frame using aluminium anodised extruded sectiions of size 101.60mmx38.10mm for frames, 50.08mmx25.33mm for stiles and rails of shutters having 1.25mm thickness, galzing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 75mm size stainless steel butt hinges -02 Nos per leaf, aluminium anodised extruded section 100mm long handle-01 Nos per leaf, 100mm long aluminium anodised stay with hook and eye of suitable side -01 Nos per leaf, aluminium anodised Tower bolts-02 Nos per leaf, aluminium anodised deco grill with suitable U frame for fixing grill, stainless steel wire cloth of 0.36mm dia with 1.90mm width of aperture complete all as specified and directed.

S&F aluminium anodised sections doors comprising glazed shutters with frame using aluminium anodised extruded sectiions of size 63.50mmx38.10mm for frames, 85mmx44.45mm for stiles, 83.50x44.45mm for top and middle rails , 100mm44.45mm for bottom rail of shutters having 1.25mm thickness, glazing with 5mm thick tinted sheet glass fixed with and including aluminium anodised snap beadings, neoprene gaskets, shutters fixed to frame with with 125 mm size stainless steell butt hinges -03 Nos per leaf, aluminium anodised fancy extruded section 200mm long handle-01 Nos per leaf, aluminium anodised Tower bolts 200mm long -02 Nos per leaf, aluminium anodised aluminium body hydraulic door closer 01 Nos per leaf of suitable capapcity, floor door stopper of anodised aluminium body 150mm long 01 No per leaf, brass Mortice lock 6 lever of required size -01 No per door complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ), removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L joint free Non Skid ceramic designer coloured tiles ( square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screeding in CM 1:4 complete all as specified.

M&L designer digital glazed ceramic coloured tiles (Group B II) of size excd 0.11 sqm and not excd 0.18 sqm , 7-8mm thick , on vertical surfaces such as dados , skirting and risers to steps etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick screeding in CM 1:3 complete all as specified. ( The quoted rate shall deem to be includued for screeding and shall not be measured and paid separately).

Taking down cement plaster on brick or stone walls , concrete block walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. and removing of the rubbish complete all as specified .

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces , in cement and sand mortar 1:6 , top surfaces finished fair and even complete all as specified

M&L rendering 12 mm thick on fair facses of brickwork , in cement and sand mortar 1:6 , top surfaces finished even and smooth without using extra cement complete all as specified

M&L preparation of newly plastered /unplastered surfaces of walls by applying distempering with distemper oil emulsion , two coats, white or tinted over a coat of alkaline resistant primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .

M&L preparation of new plastered / unplastered surfaces of walls and applying two coats with cement base paint , white or tinted over one coat of cement paint primer ( before application of cement base paint) including and washing floors, etc. , of drops and splashes complete all as specified .

M&L for preparation of old surfaces of walls by complete removal of existing treatment and applying two coats with cement base paint , white or tinted including and washing floors, etc. , of drops and splashes complete all as specified .

S&F 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with oil putty at any height complete all as specified.

S&F 3 mm thick figured glass, pin head type in squares not exceeding 0.50 sq.m. in each pane , fixed with oil putty at any height in portion (part) complete all as specified.

Hacking out old broken glass ( any thickness , size , quality or description ) from wooden frames or stone, concrete or brick surrounds , glazed with putty or fixed with beads upto 1.5 sqm complete all as specified.

M&L preparation of old painted surfaces of wooden /wood based materials of any description , not otherwise described ,over 10 cm width or girth and applying one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all dropings complete all as specified and directed.

M&L preparation of new wood or wood based materials of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamelled paint over one coat of red oxide Zinc chrome primer complete all as specified.

M&L preparation of old painted steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and painting one coat with synthetic enamel including cleaning, stopping and rubbing down and removing all drops etc. complete all as speciified.

M&L 15 mm nominal bore Mild steel galvanised water tubing , medium grade (ISI) marked , with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal, 15 mm bore all as specified.

Taking up or down steel tubing and connections , including cleaning for re-fixing or removal , 20 mm bore all as specified.

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.)15 mm nominal bore complete all as specified ( Note:- Refixing means including taking down existing pipes and fittings. However, new Galvanised mild steel pipe fittings if required shall be measured and paid separately)

Refixing old steel tubing and connections in new or old position ( walls, ceiling , floors, etc.) 20 mm nominal bore complete all as specified ( Note:- Refixing means including taking down existing pipes and fittings. However, new Galvanised mild steel pipe fittings if required shall be measured and paid separately)

Taking down unserviceable waste pipe from WHB and S&F 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fixed complete all as specified.

Taking down unserviceable waste pipe from urinal and S&F 32 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fixed complete all as specified.

Taking down unserviceable waste pipe from sink and S&F 40 mm bore Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 and fixed complete all as specified.

Taking down of existing pillar tap and S&F Pillar taps, cast copper alloy , with capstan heads, chromium plated ,screwed down for 15 mm bore pipe,high pressure , with or without l'ettered ' 'HOT' or 'COLD' with long screwed shanks and fly-nuts , screwed for iron pipe complete all as specified.

Taking down old unserviceable stop valves and S&F Stop valves, cast copper alloy, screwed down for 20 mm bore dia. pipe, high pressure, with crutch handle , screwed externally both ends for unions etc. and fixed complete all as specified

Taking down existing unserviceable ball valve and S&F Ball brass valves, high pressure, with polyethylene float and flynut complete , screwed for 20 mm bore dia. pipe or brass ferrule complete all as specified.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and refixing in position ( Exc 250 litres but not exceeding 500 litres complete all as specified and directed. ( Cleaning of tanks shall be deemed included in the unit rates quoted by contractor)

Disconnecting existing tanks, setting aside (or lowering if required) for repairs , cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc. and hoisting if required reconnecting and refixing in position ( Exc 500 litres but not exceeding 1000 litres complete all as specified and directed. ( Cleaning of tanks shall be deemed included in the unit rates quoted by contractor)

Dismantling PVC water tanks exceeding 250 litres but not exceeding 500 litres capacity and removing complete all as specified

S&F Rotational moulded poly-ethylene water storage tanks (ISI marked) ( cylinderical vertical with closed top ) 500 litres capacity ,hoisted and fixed in position complete all as specified.

Taking down of existing unserviceable bib taps and S&F Fancy type Bib taps, CP, cast copper alloy with crutch or butterfly handle , screwed down , scrwed for iron pipe or for brass ferrule and fixed 15 mm bore complete all as specified and directed.

S&F (in repairs) 15 mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified.

Taking down old unserviceable gratings and S&F stainless steel grating 125 mm dia complete all as specified.

Taking down old unserviceable PVC pipe connections and S&F PTMT connections 15 mm size with PTMT nuts of length 450 mm complete all as specified.

Taking down old unserviceable PVC pipe connections and S&F PVC connections 15 mm size with CP brass nuts of length 450 mm complete all as specified.

Taking down old existing unserviceable shower rose and S&F Cast Brass chromium plated shower rose 75 mm size with or without swivel joints, any size comprising 150mm long brass chromium plated arms including fixing to steel pipe or union complete all as specified .

Taking down of existing unserviceable plate rack and S&F stainless steel plate racks overall size 720mmx600mmx230mm having 'Salem steel body of 1.00 mm thick )

Taking down existing unserviceable Stainlees steel sink with Draining Board and S&F Stainless steel sink with draining board , made out of 1.00 mm thick sheet (ISI Marked) for kitchen or laboratory with plug, washers, waste pipe, cast iron cantilever brackets, connecting union overall size 915mmx460mm with bowl size 410mmx 355mmx200mm ( approx) complete all as specified and directed.

S&F vitreous China EWC wash down water closet pan ( padestal pattern Water Closet , popular) , ( excluding fixing bolts, flushing cistern and flush pipe) , including connection to drain ( or outgoing pipe) and to flushing pipe , etc., and fixing of seat cover complete fixed in repairs complete all as specified.

S&F vitreous China one piece EWC wash down water closet pan ( padestal pattern Water Closet , white ) , with seat cover and twin flush fittings Model No. S1013106/S1013108 of Make Cera or equivalent of other specified make , including connection to drain ( or outgoing pipe) , etc., and fixing of seat cover complete all as specified.

S&F (in repairs) Vitreous china , 'Orrisa' pattern , size 580x440 mm white, with integral foot rests Water closet only including S&F CI 'P' trap, connection to to flushing pipe,antisyphonage pipe, trap set in and including concrete, provision of lime concrete bedding (1:2:5) min 150 mm thick alround , making good floor to match with the existing complete all as specified. (a) Water closet white cat No. 20004 of Hindware (580x440), equivalent of other sepcified make as approved by GE.

Supply and fixing in repairs Plastic water closet seat, white, closed pattern with flat bottom , and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

Taking down existing unserviceable flushing cistern with flush pipe and S&F Low level flushing cistern, moulded from virgin poly propylene 10 litre capacity including provision of 32 mm dia PVC flush pipe and making connections, ISI marked or equivalent of other make specified complete all as specified and directed.

S&F ( in repairs) vitreous china wash basin (WHB) , white , flat back , size 550mmx400mm excluding supply of taps, but including 32 mm dia CP Brass waste fittings , with long screw shanks and fly nuts, 32 mm dia LDPE pipe of required length, complete all as specified.

Taking down of old existing unserviceable glass shelf and S&F corner Sheet glass shelf assembly consisting of 5.50 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing complete all as specified and directed.

Demolition Brickwork or stone boulder masonry/PCC block masonry , built in cement mortar or cement lime mortar including all quoins,arches, pillars,etc. but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified.

S&F in repairs brass jumper valves with rubber/PVC washer suitable for 15mm bore bib taps, stop valves, angle valves etc. complete all as specified.

S&F in repairs brass jumper valves with rubber/PVC washer suitable for 20mm bore bib taps, stop valves, angle valves etc. complete all as specified.

S&F in repairs brass spindle suitable for 15mm bore bib taps, stop valves, angle valves etc. complete all as specified.

S&F in repairs syphon assembly complete suiatble for 10 litres flushing cistern complete all as specified.

M/S A B CONSTRUCTION