REPAIR AND RECANNING OF CHAIRS STEEL AND REPAIRS REWEAVING OF CHARPOY GI PIPE,REPAIRS PAINTING TO STEEL ALMIRAHS,LOCKERS STEEL,TABLE BED SIDE STEEL,CHAIR WRITING STEEL,CHAIR REVOLVING,CERTAIN STEEL FURNITURE AT BSO (S) UNDER GE(SOUTH)SECUNDERABAD

Amount

CHAIR CB STEEL / CHAIR CBA STEEL Removing the existing unserviceable plastic cane for seat and back of chair CB steel with/without arms and material Re-canning with white plastic cane of size 2mmx 0.46mm and boarder with 4mmx 0.6mm plastic cane super fine quality with Godrej pattern as per particular specification shown on drawing and as directed Drg No. FD-75 (M). Note : Both the seat and back shall be measured as single unit.

Disimantling, taking out carefully old seat and back and S&F new seat and back frame made out of Ist class hard wood (teak wood) finished and canned with 2mm x 0.46mm and boarder with 4.00mm x 0.6mm plastic cane super fine quality colour white in Godrej Pattern complete all as shown on drawing, specified and directed for chair CB steel with / without arms Drg No. FD-75 (M).

Dismantling, taking out carefully old arms and S&F new arm rest made out of Ist class hard wood (teak wood) made to shape & fixed in position with suitable steel screws complete all as shown on drawing and specified for chair CB steel with/without armsDrg No. FD-75 (M).

Dismantling, taking out carefully mild steel support and S&F new mild steel runner support with running welding for jointing conduit made out of 50mm x 35 mm x3mm shall be provided with welding and screws including painting two coats of synthetic enamel paint over a coat of red oxide primer shown on drawing and specified for chair CB steel with/without arms Drg No. FD-75 (M).

Dismantling, taking out carefully unserviceable PVC rubber shoes and caps / plugs and S&F shoes/cap with steel screws where required with S&F new hard PVC rubber shoes of superior quality complete all as shown on drawing Drg No. FD-75 (M).

Preparation of existing steel surfaces of the frame and spray painting with one coat of synthetic enamel paint to steel frame and two coats of French polishing on new seat & back frame and arms complete all as shown drawing, specified and directed for Chair CB steel with /without Arms Drg No. FD-75 (M).

CHAIR VARANDAH M & L Continous running standard welding around of 12mm dia conduit of 10mm dia MS rod on broken joints of the chair verandah complete all as specified and directed including preparation of existing broken joints for new welding (Each joint measured separately ). Note : Each joint for this quoted rate shall deemed to include welding work and connected cut pieces of conduit/MS rod as mentioned and directed Drg No.FD-19/256/359.

Recanning of chair verandah in mat pattern of size 4.00 mm x 0.6 mm super fine quality colour white, as shown in drawing after removing of old cane including cleaning of surfaces of chairs with abrasive paper and applying one coat of synthetic enamel paint colour white including provision of new PVC hard shoes Drg No.FD-19/256/359.

CHAIR VARANDAH ALUMINIUM Removing the existing unserviceable plastic tube cane of chair varandah aluminum and retightening the chair frame by fixing suitable screws revets to bring the chair in shape and reweaving with plastic tube cane 4mm dia weighing not less than 1.20 kg per chair fixing with suitable screws and washers & 4 Nos new PVC shoes to legs of each chair complete all as directed Drg No. FD-259.

CHAIR REVOLVING Dismantling of unserviceable Hydraulic cylinder of Chair Revolving adjustable steel / computer chair by supply and fix new Hydraulic cylinder for chair Revolving adjustable steel , Computer chair , computer executive, chair high back and chair push back all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable PU base with caster wheels of Chair Revolving adjustable steel / computer chair by supply and fix new PU base with caster wheels for chair Revolving adjustable steel , Computer chair , computer executive, chair high back and chair push back all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Cushion and Tapestry cloth for Seat by supply and fix new Cushion 50 mm thick, 32 density with new Tapestry cloth duly stiched properly as per original shape for Seat of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Cushion and Tapestry cloth for back by supply and fix new Cushion 50 mm thick, 32 density with new Tapestry cloth duly stiched properly as per original shape for back of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Push back base by supply and fix new Push back base of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable PU Arms by supply and fix new PU Arms of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Dismantling of unserviceable Caster wheels by supply and fix new Caster wheels of chair Revolving adjustable steel , Computer chair , executive chair high back and chair push back of all as specified and as directed Drg No. TP/PCH 7001/7002/9101R.

Removing the existing U/S cushion and Tapestry cloth from seat of Chair writing steel with cushion and S&F new Puf cushion 50mm thick, 32 mm density fixed with and including 12mm thick plywood with screws with and including new Tapestry cloth duly stiched properly and complete Drg No.FD-360/TP

Removing the existing U/S cushion and Tapestry cloth from back of Chair writing steel with cushion and S&F new Puf cushion 50mm thick, 32 mm density fixed with and including 12mm thick plywood with screws with and including new Tapestry cloth duly stiched properly and complete Drg No.FD-360/TP

Preparation of existing steel surfaces of the frame of Chair writing steel with cushion and spray painting with one coat of synthetic enamel black paint to steel frame complete Drg No.FD-360/TP.

Removal of old U/S rubber shoe of Chair writing steel with cushion and S&F new hard shoe of superior quality Drg No. FD-360/TP.

CHARPOY GI PIPE WITH NYLON NEWAR :Removing the old unserviceable nylon newar and supply and weaving of Charpoy GI pipe with HDPE Nylon Newar shall be virgin quality Nylon Newar of 50/55mm wide (not made out of recycled nylon newar ) closely knit with not less than 1.50 kg of Newar per Charpoy including re-assembling, tightening of loose components and bringing the charpoy to the original shape complete all as specified and directed by Engr-in-Charge. Drg No.FD - 220

Removing the unserviceable check nut and S&F new 06mm thick GI medium grade Check nut suitable for 32mm dia GI pipe confirming to IS complete as shown on drawing. Drg No.FD - 220

Removing the unserviceable 03 way GI elbow and S&F 32mm dia medium grade 03 way GI elbow duly ISI marked complete as shown on drawing. Drg No.FD - 220

Removing the existing unserviceable long rail and S&F with new long rail of 32mm diaGI pipe medium grade of approved make of size 1980mm including cutting and threading and bringing the Charpoy to the original shape duly ISI marked complete as shown on drawing. Drg No.FD - 220

Making short rail from the unserviceable long rail obtained out of item No 24 above including cutting, threading and fixing including removal of old unserviceable short rail complete all as specified and as shown on drawing. Drg No.FD - 220

Making leg from unserviceable short rail obtained out of item Nos 25 above including cutting, threading at one end and other end shall be fixed 3mm thick MS base plate duly welded at bottom and providing two numbers, flat iron 25mm x 3mm thick, MS clamps made to shape as shown on drawing welded to each leg with bottom of lower clamp plugged with 3 mm MS sheet duly painting with two coats of synthetic enamel black paint over a coat of red oxide primer to exposed surface of MS clamps and MS sheet including removal of old unserviceable legs complete all as specified and as shown on drawing. Drg No.FD - 220

STEEL ALMIRAH LARGE/ MEDIUM Supply and fix locks 6 levers brass of approved quality with duplicate keys including removal of existing unserviceable locks complete as directed Drg No FD -67/104/114/243/351/1031/1032

Supply and fix chromium plated handle 125mm long with suitable nuts and bolts as required including removal of existing unserviceable handle complete as directed Drg No FD -67/104/114/243/351/1031/1032.

Supply and fix corner clips made out of 3mm thick MS sheet made to shape as per drawing for shelves of almirah large/medium steel with shelves including removal of existing unserviceable clips complete as directed Drg No FD -67/104/114/243/351/1031/1032

Supply and fix three way locking device made out of 8mm dia MS rod with 3 mm thick MS sheet made to shape complete with fixing accesseries as shown on drg for steel alrmirah large including removal of existing unserviceable locking device complete as directed Drg No FD -67/104/114/243/351/1031/1032.

Supply and fix three way locking device made out of 8mm dia MS rod with 3 mm thick MS sheet made to shape complete with fixing accesseries as shown on drg for steel alrmirah medium including removal of existing unserviceable locking device complete as directed Drg No FD -67/104/114/243/351/1031/1032.

Supply and fix leg made out of 1.0mm thick MS sheet of size 470 mm x 100 mm high complete as shown on drawing for almirah large steel all as specified with two coats of Olive Green synthetic enamel paint over a coat of primer including removal of existing unserviceable leg complete as directed Drg No FD -67/104/114/243/351/1031/1032. Note : Each leg will be measured and paid seperately.

Supply and fix leg made out of 1.0mm thick MS sheet of size 420 mm x 100 mm high complete as shown on drawing for almirah medium steel all as specified with two coats of Olive Green synthetic enamel paint over a coat of primer including removal of existing unserviceable leg complete as directed Drg No FD -67/104/114/243/351/1031/1032.. Note : Each leg will be measured and paid seperately.

Removal of unserviceable shelf for almirah large steel and supply and fix new shelf made out of MS sheet 1.0mm thick bent to shape as per drawing duly painting with two coats of Olive Green synthetic enamel paint over a coat of primer all as specified and directed Drg No FD -67/104/114/243/351/1031/1032.

Removal of unserviceable shelf for almirah medium steel and supply and fix new shelf made out of MS sheet 1.0mm thick bent to shape as per drawing duly painting with two coats of Olive Green synthetic enamel paint over a coat of primer all as specified and directed Drg No FD -67/104/114/243/351/1031/1032.

Removal of unserviceable shutter for almirah large steel and supply and fix new shutter made out of MS sheet 1.0mm thick bent to shape as per drawing duly painting with two coats of Olive Green synthetic enamel paint over a coat of primer all as specified and directed Drg No FD -67/104/114/243/351/1031/1032.

Removal of unserviceable shutter for almirah Medium steel and supply and fix new shutter made out of MS sheet 1.0mm thick bent to shape as per drawing duly painting with two coats of Olive Green synthetic enamel paint over a coat of primer all as specified and directed Drg No FD -67/104/114/243/351/1031/1032.

LOCKERS STEEL Supply and fix aluminium anodised 'D' type handle 100mm long including removal of existing unserviceable handle complete as directed Drg No FD-257/1029

Supply and fix aluminium hasp and staple 75mm long including removal of existing unserviceable hasp and staple complete as directed Drg No FD-257/1029.

Removal of unserviceable shutter for locker steel and supply and fix new shutter made out of MS sheet 1.0mm thick bent to shape as per drawing duly painting with two coats of Olive Green synthetic enamel paint over a coat of primer all as specified and directed Drg No FD-257/1029

Supply and fix leg for locker steel made out of 1.0 mm thick MS sheet complete as shown on drawing all as specified with two coats of Olive Green synthetic enamel paint over a coat of primer including removal of existing unserviceable leg complete as directed Drg No FD-257/1029. Note : Each leg will be measured and paid seperately.

TABLE BED SIDE STEEL Supply and fix top of size 550 x 330 mm made out of 18 mm thick pre laminated particle board (one side white shade) with 6mm thick teak wood edging alround including removal of existing top complete all as specified and shown on drawings Drg No FD - 157.

Preparation of old painted surfaces take Bed side steel and painting with one coat of synthetic enamel paint white complete all as directed Drg No FD - 157.

Supply and fix MS hinges of 50mm long and welded properly including removal of existing MS hinges complete all as specified and shown on drawings Drg No FD - 157.

Supply and fix brass knobs chromium plated 25mm dia including removal of existing knobs complete all as specified and shown on drawings Drg No FD - 157.

Supply and fix hard rubber toes including removal of existing rubber toes complete all as specified and shown on drawings Drg No FD - 157.

REPAIRS TO STEEL TABLES Removing the old unserviceable table top of Table steel 1010x650x760mm with drawer and S&F with new table top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No TP.

Removing the old unserviceable table top of Table steel 900x900x760mm without drawer and S&F with new table top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No FD-1009.

Removing the old unserviceable table top of Table office officer steel 1370x760x750mm with drawer and S&F with new table top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No FD -84/1003.

Removing the old unserviceable table top of Table steel 900x600x 760 mm with drawer and S&F with new table top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No FD - 1008.

Removing the old unserviceable table top of Table steel 900x600x 760 mm without drawer and S&F with new table top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No FD - 1007.

Removing the old unserviceable table top of Table Office clerk steel of sorts of size 1200x610mm with drawer and S&F with new table top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No FD-84/381/1000.

Removing of old unserviceable locks of steel table and S&F with new brass locks of 04 levers of approved make with duplicate keys complete all as shown on drawings & as directed.

Removing of old unserviceable drawer from table office clerk and S&F new drawer of size 410 x 350mm made out of 1.0mm thick MS sheet made to shape as per drawing duly painting with two coats of synthetic enamel paint Olive Green over a coat of primer complete all as shown on drawing and as directed.

Removing of old unserviceable rubber shoe and S&F new hard rubber shoe of superior quality as approved and all as shown on drawings for steel tables Drg No FD-84/381,1000,1007,1008,1003.

TEAPOY VARANDAH Removing the existing unserviceable top and S&F new top of size 900 x 450mm made out of 18mm thick pre laminated particle board with teak shade of approved make duly providing 6mm thick TW edging alround including painting the steel frame by scraping old surfaces with one coat of synthetic enamel paint white and providing 04 Nos of hard rubber shoe complete all as directed & shown on drawings Drg No FD - 255/383

TABLE DINING (ORs) (8 PERSONS) Removing unserviceable top of size 1880 x 680 mm of table dining (ORs) and S&F with new top made out of 18/19 mm thick pre laminated particle board of approved make and shade duly providing 6 mm thick TW beading alround complete all as specified in drawings and as directed Drg No FD - 165.

Removing unserviceable leg of table dining (ORs) and S&F new leg made out of 25mm square mild steel of 16 gauge, 0.741 mtrs long complete all as shown on drawings.

Removing unserviceable top frame long rail and S&F top frame long rail and stiffner made out of 25mm square mild steel of 16 gauge, 1.575 mtrs long complete all as shown on drawings.

Removing unserviceable top frame short rail and S&F new top frame short rail made out of 25mm square mild steel of 16 gauge, 0.450 mtrs long complete all as shown on drawings.

Chair Writing (MAP) with cushioned for seat and back M & L for removing the existing unserviceable cushion and S& F new synthetic foam cushion of 32 density 50mm thick of size 22" x 20" covered with leutherised foam of approved quality for seat and back of chair as directed by Engr-in-charge Make of cushion : Sleepwell/ Kurlon

Preparation of old exixting paint steel surfaces by remaining of all dents, filling with putty and spray painting with one coat of synthetic enamelled paint black colour (1st quality) for Chair writing (MAP)

M & L removing of old unserviceable handles and S &F new handles as per drg and as directed by Engr-in-charge. for Chair writing (MAP)

Removal of old w/s rubber shoe and S & F hands 04 Nos PVC Shoes to all chairs of superior quality approved by Engr-in-charge for Chair writing (MAP)

PAINTING TO STEEL FURNITURE Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Almirah Large Steel with shelves of overall size 1985 x 920 x 485 mm Drg No FD - 67/351/1031

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Almirah medium steel with shelves of overall size 1270 x 765 x 440 mm Drg No FD - 67/243/1032 .

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Locker steel of overall size 1090 x 760 x 650 mm Drg No FD - 257/1029.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Rack six tiers steel of overall size 1905 x 915 x 305 mm Drg No FD - 01R CE(HZ).

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for chair CB steel with/without arms Drg No. FD-75 (M).

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Table steel of size 900x900x 760mm with / without drawer Drg No FD - 1009.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Table Office Offcer steel of size 1370x760x750 mm Drg No FD - 84/1003.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Table steel of size 900x600x 760mm with drawer Drg No FD - 1008.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Table steel of size 900x600x 760mm without drawer Drg No FD - 1007.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Table steel of size 1010x650x 760 mm with drawer Drg No TP.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Book shelf open small steel of size 990x915x305 mm Drg No FD - 69/355.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Book case steel size 1675x840x 305/310mm with 4 compartments Drg No FD - 90/1028.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Rack side with tray steel Drg No FD - 1023.

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Rack steel of sorts of size 1905x 915x305 mm Drg No FD - 106M/TP/129M/1037

Preparation of old existing painted steel surfaces of internal and external by removing of all dents, filling with putty and spray painting with one coat of synthetic enamel paint Olive Green (1st quality) as indicated on drawings and as directed for Table dining (ORs) of size 1600x510 x740 mm (8 persons) Drg No FD - 165.

Mavee Syndicate

sandhya enterprises

K APPAJI KUMAR AND CONSTRUCTIONS